IMPORTANT GUIDE FOR ANYONE WITH AN HP DEVICE NOT WORKING AFTER SNOW LEOPARD

To anyone with an HP printer/scanner device,
After being frustrated with my HP Photosmart C4580 not being able to scan for over an hour (scouring the forums, HP's website etc), I've come to realize my problem. Note that this has only been tested on a device that is plugged in DIRECTLY to your mac. I have not tried this over the network and do not plan to since my house is not set up for that.
Anyone who is having any issues with their device, UNINSTALL the HP software. The software is simply incompatible with SL and will mess up your devices! HP even says so on their website (see link below)!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481
This is easily done by going to your applications folder > Hewlett Packard > HP Uninstaller. After using the uninstaller to uninstall HP's apps from your computer unplug your scanner from your computer and power supply. Now to make sure there are NO printers registered with your computer that could possibly mess up the fresh driver install, go to System Preferences > Print & Fax. Right click anywhere in the left pane (where any printers you have/had installed will be located) and click "Reset Printing System". This will wipe out any traces of a printer so you can start a-new.
Now, restart your computer. After it is restarted, plug your printer into the power source, then when it is fully booted up you may plug it into your USB slot. Then, go to System Preferences > Print & Fax. Click on the "+" (which will give you the interface to add your printer), select your printer (which you should note will say "USB Multifunction" instead of "USB" which is what showed up with the HP software still installed), and click "add". Your mac will do the rest (installing the drivers and such) and you should be able to print & scan as usual.
Note that you will need to scan using Preview, Image Capture, or your Printer Queue due to the changes with Snow Leopard (see the HP link above to learn how to use these). Your device should now properly show up when you use these applications to try and scan now.
-Mike S

@lakewood - there is nothing specifically in Software Update if you upgrade from Leopard to Snow Leopard. For me anyway..seems like thats the case for everyone though.
@ruger - so it won't even let you hit the '+'? For me, I had to hit the '+' to get it to install which in turn automatically downloaded the proper software/drivers for my device. if i were you, i'd see if i could get that to happen and hit '+' to install it. also - make sure you don't have any of the HP software on your computer also (use the uninstaller provided!)..that was really what did the trick for my machine. HP has come out and specifically said to not use the device manager, but that didn't quite do it for me. i had to uninstall everything that came on that CD (its all located in applications > Hewlett-Packard and, like i said, can be uninstalled easily using the provided uninstaller).
if all else fails, what i've also heard helps is just to reinstall snow leopard. that'll make sure everything is fresh. i'd delete all your printers like i outlined in my first post first THEN reinstalling it if you wish to go that route. however, it really does sound like the driver is messed up if its pausing and works fine with time capsule. idk how old the printer is, but sometimes with older models, the support blows. i apologize if none of this helps whatever the reason for your troubles may be, though.
Good luck,
-Mike S
PS: printers are always terrible to upgrade on everyone's end. consumers, operating systems, and manufacturers. it stinks that nothing can be generic and run similarly anymore =/

Similar Messages

Are mobile internet USB devices still not working on Snow Leopard?

Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

No no dear this is not my problem
My problem that i mean i say when i on my
Cellural data my gprs not working and not work my internet

Code is not working check for solution . The code is not working after look up table.

In this code i am multiplying two binary images , one is a rectangle and another is an image. i am getting the rectangle, but not the image. The image part is not working after the look up table. Waiting for the solution
Attachments:
binary morphology.vi ‏33 KB

Hey. I'm thinking the problem is in theis block:
LOOP AT C_T_DATA INTO WA_MC17I30HDR.
   READ TABLE LT_AFIH
     WITH KEY AUFNR = WA_MC17I30HDR-AUFNR
     INTO WA_AFIH BINARY SEARCH.
   IF SY-SUBRC = 0.
     WA_MC17I30HDR-ZZNPLDA = WA_MHIS-NPLDA.
     MODIFY C_T_DATA FROM WA_MC17I30HDR.
ENDIF.
ENDLOOP.
You are reading LT_AFIH into WA_AFIH. But then you are assigning NPLDS from WA_MHIS. From what I can see, WA_MHIS hasn't been filled with anything. Try changing:
     WA_MC17I30HDR-ZZNPLDA = WA_MHIS-NPLDA.
To:
     WA_MC17I30HDR-ZZNPLDA = WA_AFIH-NPLDA.
Hope that does the trick.
Thanks
Edited by: Siboda_Eric on May 26, 2010 3:49 PM

PDANet 1.10 for Mac with PDANet 5.02 not working in Lion

After I upgraded my Mac to OS X Lion (10.7) last night, I have not been able to tether via USB to my iPhone running PDANet.
I have uninstalled and reinstalled PDANet on the Mac. I cannot add a PDANet network interface anymore. When I click on PDANet icon's Connect in the Mac OS X status bar, the icon does not get filled with blue and no connection is established. On the iPhone, the PDANet app shows the connection screen for a split second and then goes back to the choice of tether types. I have tried to search the Web today, but I am not seeing any references to PDANet not working as of this morning. Perhaps this is an issue with iTunes 10.4 and not Lion? Or perhaps it is Lion that has caused this.
After upgrading to Lion, I have had other applications not working: ZTerm, Keyspan USA-HS19 USB-to-Serial adapter, Glims, Java apps (no Java Runtime in Lion anymore), and now it's PDANet. I have been able to fix all other issues, but not the PDANet's USB tether.
My software versions are:
Mac OS X: Mac OS X Lion (10.7)
PDANet for Mac: PDANet 1.10
PDANet for iPhone: PDANet 5.02
iTunes: iTunes 10.4
iOS: iOS 10.3.3 running on iPhone 3GS
Anyone else having this issue?

I reported this issue to Junefabrics, and got a response today:
"Hi
Uninstall PdaNet on Mac (and reboot) then reinstall the new version from
http://www.junefabrics.com/iphone/mac.php
The new version was just released today.
Thanks,
June Fabrics PDA Software Support
http://www.junefabrics.com
I followed the steps, and USB tethering started working again.

Yamaha XG-AC Audio device not working after SP2 for XP was installed

Hi,
i'm new in this forum and maybe my question is a stupid one but i'm not able to solve this problem.
My Satellite 5200-801 doesn't make any sound after i've installed SP2 for XP. I tried to find a new driver for Yamaha XG-AC Audio Device( the one that doesn't work is 6.13.10.2152 (date 19/07/2002)but i was not able to find anything.
Please, could you help me ?
Thanks
Bruno

Hi,
I found another posting in this forum about this issue!
Your Satellite 5200-802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip does make problems with Service Pack 2 because MS regards the Yamaha AC-XG sound driver as being unstable. When Service Pack 2 is installed, Windows will disable the sound driver.
Here are some links which could help you!
Yamaha Generic Driver:
http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
Relevant links:
http://www.yamaha.co.jp/english/lsiexp.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;328435
Happy new year!
TOK

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

USB devices not working after wake from sleep on WinXP!!! HELP PLEASE!

I would like to put my windows xp to sleep whenever I leave the macbook pro for fear of overheating too much when I'm not using it.
The only problem is that I can't use any more USB devices if I plug them in once I wake it from sleep.
Like my mouse for example, I'm using a laser mouse with a usb plugin but it doesn't respond once I try to use it after WinXP on wake....
Experiencing a ton of wake problems lately...
Sleep is important for a MBP....I hope...

Welcome to Windows. Some devices do not like to be put to sleep in Windows.
There could be driver updates or hot fixes from MS to fix these.
A very proven method (though not for battery life) is to instruct the devices not to go to sleep when the system goes to sleep. You can do this via the device manager in the control panel.
Its not a gracious solution but it will do what you want it to do.

Custom app working with CRE 8.5, not working after migration to BOE XI

Hello,
I have this custom legacy app coming from way back in time, which -among other things- connects to a CRE 8.5 APS to get the list of available reports and the rights of a given user over those reports (view instances, request on demand, and so on). The logic of this custom application works quite well, though it's a bit cryptic (to me at least).
Now, I have the task of migrating the app from CRE 8.5 to BOE XI R2. The migration itself was rather easy, thanks to the migration wizards, and all the users, groups, permission settings, and everything else seems to have been properly replicated in the BOE XI CMS. However the custom app is not working so well after the migration: it can retrieve all the info about the reports and do pretty much the same it was doing before the migration, but when it comes to user's security settings (permissions to see or request a given report) the app just can't get the proper info.
To properly explain what's going on, I will have to go into detail with some lengthy description of the code.
Here it goes. This is the (partial) code that queries if a given user (UserID) has permission to view and/or request on demand a set of reports in the server:
Qry2 = "Select SI_ID, SI_NAME From CI_INFOOBJECTS"
Qry2 = Qry2 & " Where SI_PROGID = " & "'" & "CrystalEnterprise.Folder" & "'" _
         & "and SI_PARENT_FOLDER in " & GetFirstLevelFolder(iStore, FolderProperty)
Set varFolders = iStore.Query(Qry2)
For Each Item In varFolders   'First level displayed folder
      Set infoSLevelFolders = GetSubfoldersByParentID(iStore, Item.ID) 'Second level displayed folders
      intFolderRightsCount = GetRightsCount(iStore, UserID, Item.ID)
      For Each infoSLevelFolder In infoSLevelFolders
           Set infoReports = GetReportsByFolderID(iStore, infoSLevelFolder.ID)
           For Each infoReport In infoReports
                  rsOutput.AddNew   'Set output recordset fields
                  rsOutput.Fields("FOLDERID") = Item.ID
                  rsOutput.Fields("FOLDERNAME") = Item.Title
(not sure why, but the message won't accept more text than the above... I will have to post a second message with the rest of it)
Edited by: Marcelo Rybertt on Mar 30, 2010 8:39 PM
Edited by: Marcelo Rybertt on Mar 30, 2010 8:49 PM

                  rsOutput.Fields("FOLDER2ID") = infoSLevelFolder.ID
                  rsOutput.Fields("FOLDERNAME2") = infoSLevelFolder.Title
                  rsOutput.Fields("REPORTID") = infoReport.ID
                  rsOutput.Fields("REPORTNAME") = infoReport.Title
                  If UserID = 0 Or intFolderRightsCount > 1 Then 'no this user or rights on the folder level
                     rsOutput.Fields("ROD") = False
                     rsOutput.Fields("VRI") = False
                  Else
                     intReportRightsCount = GetRightsCount(iStore, UserID, infoReport.ID)
                     If intReportRightsCount = 4 Then
                        rsOutput.Fields("ROD") = False
                        rsOutput.Fields("VRI") = True
                     ElseIf intReportRightsCount = 5 Then
                        rsOutput.Fields("ROD") = True
                        rsOutput.Fields("VRI") = False
                     ElseIf intReportRightsCount > 5 Then
                        rsOutput.Fields("ROD") = True
                        rsOutput.Fields("VRI") = True
                     Else
                        rsOutput.Fields("ROD") = False
                        rsOutput.Fields("VRI") = False
                     End If
                 End If
           Next
     Next
Next
I have two scenarios, for the same user. The first scenario is the custom app working against a CRE 8.5 server. The second scenario is the same app against a BOE XI server, and the data in that server is the result of running the import wizard, using the 8.5 server as the source of data. The app was done with VB6, and the only difference between working against 8.5 or XI, is the set of dll's used in each case (code compiles flawlessly with either set of libraries).
ROD stands for Request On Demand. True means the user can ROD. False, the user can't.
VRI stands for View Report Instance. Same deal.
intFolderRightsCount and intReportRightsCount are both calculated from the GetRightsCount function, like this:
Set iReports = iStore.Query("Select SI_ID From CI_INFOOBJECTS Where SI_ID=" & REPORTID)
u2026
Set principal = iReport.SecurityInfo.AnyPrincipal(UserID)
u2026
GetRightsCount = principal.Rights.Count
(again, same issue with the message... need to continue this in a third -and last I hope- post)

2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment. In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

IDVD 08 - problem with scene selection tabs not working after "burn"

I have a movie that is about an hour long (made in iMovie08 using mostly still photos). I wanted to have "chapters" -- but with that option gone, I used the Scene Selection option in iDVD08. This created menus with 15 scene selection buttons (I chose every 4 minutes). The menus were automatically created by iDVD and I did nothing to change them, except to type in scene info (two-three words).
The buttons all worked fine on the computer, and I burned a DVD. The DVD worked great in my VCR player. I'd select Play Movie and it would go. I'd select Scene Selection and I'd get the menus for that. But when I'd highlight one of the scene selections and "enter" (select) -- it wouldn't go to that scene. I could go back and forth between menus, and could move around and highlight the scene buttons, but selecting would not start the scene to play. The movie played fine from start to finish, and the other remote features worked (stop, pause, menu, etc.).
I went back to iDVD and chose a different theme (thinking maybe I'd inadvertently done something to mess things up. The only thing I did differently in addition to the new theme, was to add two small movie clips - and I rearranged the buttons on the menu (dragging) to get them positioned where I wanted them. So my first menu says "Play Movie". The second menu has: Play Movie, Scene Selections, Little Movie 1, Little Movie 2. Everything worked greated in iDVD. Then I created a disk image to view using DVD Player (rather than waste another DVD). Same problem -- only worse. This time I couldn't even highlight Scene Selection to get to the scenes' menus.
Any thoughts on why I'm not able to get the "Scene Selection" buttons to work after a burn? Am I missing a step somewhere in iDVD?
Thanks.

I am not sure, but does your post concerning the problem, that all Remote Control function will work properly within iDVD'08 but after burning the DVD absolutely not with the RC of your set top DVD player connected to your TV?
If this is it:
Meanwhile I could figure out - after many nights of not been very productive and only working out on all the iDVD'08 problems - that **ALL** of the *7.0 Themes* have a major problem in generally.
The following points are concerning iDVD'08 using any of the 7.0 Themes:
- Complete deep freeze of your Mac under Leopard when rendering/coding/burning a movie which has chapters and you use movies instead of still images in drop zones. (LeopardiDVD087.0Themes)
- Functions on remote control of your set top DVD player are not working correctly when making a movie with chapters. This is generally on Tiger and Leopard the same problem using iDVD08 with any of the 7.0 Themes.
Quick and dirty workaround:
You may avoid this if you simply use a 6.0 Theme or lower version of the Themes.
But this is of course not the clue...
It is VERY DISAPPOINTING, having software at such a low quality level deliverd by Apple. And somehow it looks like they DO NOTHING against it. No statement, no excuse, they really remain silent.
This may also be a thread you could be interested in:
http://discussions.apple.com/thread.jspa?threadID=1203323
Cheers,
Roland

Usb devices not working after 2.6.38 kernel upgrade

Hello everyone,
today I've upgraded my aur system to the latest packages version , kernel 2.6.38-2 .
After the reboot the usb keyboard doesn't work at all , as the usb mouse, leaving me struck at the login screen .
If I try to modify kernel boot parameters in grub or in a live distro (sysrescd) the keyboard works flawlessy .
Any clue ?
thanks in advance

I just updated to 2.6.38.7-1. The USB devices that I have plugged in before booting work (e.g USB headset). If I try to insert a new USB device, it isn't recognized. Flash-disks and USB mice that worked under the last kernel aren't working at all.
Is there a command that lets you "turn on" a USB device, or force the kernel to recognize it? I tried messing around in /sys/bus, but even in the root shell, I got "invalid write" errors.
Interesting snippet from dmesg;
[ 19.399041] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 19.399447] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 19.412940] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 19.413381] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 151.340126] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Here's where it finds my webcam;
[ 9.626704] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 10.381678] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input15
[ 10.381759] usbcore: registered new interface driver uvcvideo
.. and where it finds the mouse I had plugged in (you can see me disconnect it at entry 148);
[ 10.490045] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 11.201856] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input16
[ 11.202001] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 11.202017] usbcore: registered new interface driver usbhid
[ 11.202019] usbhid: USB HID core driver
[ 148.846756] usb 5-1: USB disconnect, address 2
When I try to reconnect the mouse, nothing happens. You can see that the kernel has this error repeatedly;
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
Edit: Found a temporary fix*.
# cd /sys/bus/usb/devices/
# for device in usb*; do echo "on" > $device/power/control; done
* I'm not responsible for what happens to your devices when you run this, but it worked for me. Check out: http://www.mjmwired.net/kernel/Document … gement.txt
Last edited by vkumar (2011-05-28 04:28:05)

VN7-791G bluetooth devices not working after Windows 10 upgrade

After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7. All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated 21/6/2006). Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10. I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck. I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom. The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.

Yay! Success at last! Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting. This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.

Javascripts for gallery images and movies do not work after Apple updates?

The javascript that opens image links and movies no longer appears to work after runing recent Apple updates. (OSX 10.4.7 and Safari 2.0.4) The pages still work fine in Firefox under 10.4.7 and also in older versions of the OS (10.4.6) and Safari (2.0.3), but nothing happens anymore when clicking on these using Safari on my recently-updated MBP. Has anyone else experienced this?

No problem here.

Problem with audio output device not working

Okay about a week ago, i came home from work, booted up my laptop and noticed that the hp quicktouch program failed to start. Then I also noticed a red X over my sound icon on my taskbar. So i thought it might have been an error of some sort and rebooted. When I did that everything came back up find, but when I started playing a game, I noticed the sound went out again... I closed the game and went into the device manager. But as soon as I closed the game out the sound fixed itself... So i started the game back up and about 10 mins in it went out again... So I went back into device manager, scanned for hardware changes and it seems to be working find, so i reinstalled the game thinking that could be the problem.
Well when I rebooted my laptop i got the error again about quicktouch and the red X over my speaker icon. I went back into device manager to find that my sound, game controller device and driver is not even listed...
Ive been looking around for a fix to this problem, but could not find any solution. So today I reinstalled windows again, but no sound, no driver, or anything is showing up. I really dont know what to do to fix this, people say download drivers and ive tried that, nothing is seeming to work.
If anyone knows what I can do to fix this please inform me, the only thing else I can think of is go MAC lol.
Oh btw, im running a HP Pavilion Entertaiment PC (dv9700). It has windows vista 64 bit.
Thanks in advance.

use stystem recovery and lose all files, photos, games and all settings - that the best way ....
use device manager to reinstal sound driver, but try to install diferent versions of it, after update (made by hp update) i had no sound, installing older ver help
sorry for my poor english
Hp Pavilion dv6408nr - Vista
external HDD - ubuntu

IMPORTANT GUIDE FOR ANYONE WITH AN HP DEVICE NOT WORKING AFTER SNOW LEOPARD

Similar Messages

Maybe you are looking for