Important : how to create a  validation for table field.

Hi all,
I have created a table in which i have date field of format MM/DD i.e char 5.
i want validation that if user creates a entry in date field then if he enters first two digit more then 12 then validation must be their that please enter first 2 digits from 1-12.
similarly for last two digitsi.e it must be from 1-31
so how can i provide this validation.
if u have any confusion in understanding the query please revert.

Declare 3 variables
DD(2) type char
MM(2) type char
Temp(2) type char
Date(5) type char
Get the DD and MM value from your date field
if MM > 12.
    temp = MM.
    MM = DD.
    DD = temp.
endif.
Then concatenate MM & DD into date and save
Hope it helps!
Regards,
Ashok

Similar Messages

  • How to create Search Help for a field in Table control !!

    Hello Friends,
                  I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
    Thanks,
    Senthil

    Check the sample code:
    *&  Include           ZSRO_MPRN_SEARCH                                 *
    MODULE PSTLZ_F4 INPUT
    MODULE pstlz_f4 INPUT.
    reading post code
      DATA: stepl TYPE systepl,
            stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode  = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s005(zspa) WITH ws_postcode .
      ENDIF.
    ENDMODULE.                    "PSTLZ_F4 INPUT
    MODULE MPRN_F4 INPUT
    MODULE mprn_f4 INPUT.
    reading post code
    DATA: stepl TYPE systepl,
           stepl_index TYPE systepl.
      CLEAR: stepl, stepl_index.
      CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
      lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields-stepl     = stepl.
      APPEND lt_dynpfields. CLEAR lt_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = c_x
          determine_loop_index = c_x
        TABLES
          dynpfields           = lt_dynpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields INDEX 1.
      ENDIF.
      ws_outcode = lt_dynpfields-fieldvalue.
      stepl_index = lt_dynpfields-stepl.
      REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
      IF NOT lt_dynpfields-fieldvalue IS INITIAL.
        MOVE lt_dynpfields-fieldvalue TO ws_outcode.
        ws_len = STRLEN( lt_dynpfields-fieldvalue ).
        IF ws_len GE 7.
          ws_len = ws_len - 3.
         ws_icode = ws_code+ws_len(3).
          lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
          CONCATENATE lt_dynpfields-fieldvalue '%'
              INTO ws_outcode.
          CONDENSE lt_dynpfields-fieldvalue.
       REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
        ELSE.
          CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
            INTO ws_outcode.
        ENDIF.
       ws_ocode = ws_code+0(3).
      ENDIF.
    reading MPRN
      CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
      REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
      lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
      lt_dnpfields-stepl     = stepl_index.
      APPEND lt_dnpfields. CLEAR lt_dnpfields.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = lt_dnpfields
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dnpfields INDEX 1.
      ENDIF.
    MPRN blank and Post code exist
      IF lt_dnpfields-fieldvalue IS INITIAL.
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode.
        ELSE.
    MPRN blank and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1.
        ENDIF.
      ELSE.
    MPRN exist and Post code exist
        IF NOT lt_dynpfields-fieldvalue IS INITIAL.
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE outcode LIKE ws_outcode AND
                       mprn EQ lt_dnpfields-fieldvalue.
        ELSE.
    MPRN exist and Post code blank
          SELECT mprn ser_num sub_bud bud_name del_pt_alias
                 bud_num dep_street prin_street dbl_dep_street
                 dep_locty post_town county outcode incode
                 lg_site_ind file_date FROM zspa_mprn INTO
                 CORRESPONDING FIELDS OF TABLE i_mprn1
                 WHERE mprn EQ lt_dnpfields-fieldvalue.
        ENDIF.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'MPRN'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select MPRN'
          value_org       = 'S'
        TABLES
          value_tab       = i_mprn1 "lt_mprn
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
        IF sy-subrc EQ 0.
    Updating MPRN
          MOVE i_mprn1-mprn TO i_mprn-mprn.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-MPRN'.
          ws_dynpfld-fieldvalue = i_mprn1-mprn .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         ws_dynpfld-stepl  = mprn-current_line.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
    Updating post code
          CONCATENATE i_mprn1-outcode  i_mprn1-incode
                        INTO ws_postcode
                             SEPARATED BY space.
          MOVE ws_postcode TO i_mprn-post_code.
          CLEAR   : i_dnpfld,
                    ws_dynpfld.
          REFRESH : i_dnpfld.
          ws_dyname   = 'ZSRO_MASTER_DATA'.
          ws_dynumb   = '0301'.
          ws_dynpfld-fieldname  ='I_MPRN-POST_CODE'.
          ws_dynpfld-fieldvalue = ws_postcode .
          ws_dynpfld-stepl      = stepl_index.
          APPEND ws_dynpfld TO i_dnpfld.
    **code changed by laxman 10.08.2005
         break gblap0.
         ws_dynpfld-stepl  = mprn-current_line.
         LOOP AT i_mprn.
           MOVE i_mprn1-mprn TO i_mprn-mprn.
           MOVE ws_postcode TO i_mprn-post_code.
           MODIFY i_mprn INDEX
                    mprn-current_line." transporting MPRN POST_CODE.
         ENDLOOP.
    **code changed by laxman 10.08.2005
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              dyname               = ws_dyname
              dynumb               = ws_dynumb
            TABLES
              dynpfields           = i_dnpfld
            EXCEPTIONS
              invalid_abapworkarea = 1
              invalid_dynprofield  = 2
              invalid_dynproname   = 3
              invalid_dynpronummer = 4
              invalid_request      = 5
              no_fielddescription  = 6
              undefind_error       = 7
              OTHERS               = 8.
          IF sy-subrc <> 0.
          ENDIF.
        ENDIF.
      ELSEIF sy-subrc EQ 2.
        MESSAGE s006(zspa) WITH i_mprn1-mprn .
      ENDIF.
    ENDMODULE.                    "MPRN_F4 INPUT
    MODULE GNTC_F4 INPUT
    MODULE gntc_f4 INPUT.
      DATA: BEGIN OF lt_gntc OCCURS 0,
              gntc LIKE iflot-zzgntc,
            END OF lt_gntc.
      CLEAR:   lt_returntab, lt_gntc.
      REFRESH: lt_returntab, lt_gntc.
      lt_gntc-gntc = 'DM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      lt_gntc-gntc = 'NDM'.
      APPEND lt_gntc. CLEAR lt_gntc.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZZGNTC'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          window_title    = 'Select Gas Nomination Type Code'
          value_org       = 'S'
        TABLES
          value_tab       = lt_gntc
          return_tab      = lt_returntab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
      IF sy-subrc EQ 0.
        READ TABLE lt_returntab INDEX 1.
        i_mprn-dm_ndm = lt_returntab-fieldval.
      ENDIF.
    ENDMODULE.                    "GNTC_F4 INPUT
    *&      Module  mprn1_f4  INPUT
          text
    MODULE mprn1_f4 INPUT.
      DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_returntab1  LIKE ddshretval OCCURS 0 WITH HEADER LINE,
            lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
            lt_dnpfields1  LIKE dynpread OCCURS 0 WITH HEADER LINE.
      DATA: stepl1 TYPE systepl,
            stepl_index1 TYPE systepl.
      DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
             ws_dyname1     LIKE d020s-prog,
             ws_dynumb1     LIKE d020s-dnum,
             ws_dynpfld1    LIKE dynpread.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
             lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
             stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-MPRN'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " mprn1_f4  INPUT
    *&      Module  pstlz1_f4  INPUT
          text
    MODULE pstlz1_f4 INPUT.
      CLEAR: i_dnpfld1,  ws_dyname1, ws_dynumb1, ws_dynpfld1,
              lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
              stepl1, stepl_index1.
      REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
    To Determine Steploop Index
      lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
      lt_dynpfields1-stepl     = stepl1.
      APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = sy-repid
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
          determine_loop_index = 'X'
        TABLES
          dynpfields           = lt_dynpfields1
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc EQ 0.
        READ TABLE lt_dynpfields1 INDEX 1.
      ENDIF.
      stepl_index1 = lt_dynpfields1-stepl.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          tabname           = 'IFLOT'
          fieldname         = 'I_MPRN-POST_CODE'
          searchhelp        = 'ZS_MPRN_PC'
          dynpprog          = sy-repid
          dynpnr            = sy-dynnr
        TABLES
          return_tab        = lt_f4
        EXCEPTIONS
          field_not_found   = 1
          no_help_for_field = 2
          inconsistent_help = 3
          no_values_found   = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Update tablecontrol
      READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-post_code.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-POST_CODE'.
        ws_dynpfld1-fieldvalue = i_mprn-post_code.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
      CLEAR  : i_dnpfld1, ws_dynpfld1.
      REFRESH: i_dnpfld1.
      READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
      IF sy-subrc = 0.
        MOVE lt_f4-fieldval TO i_mprn-mprn.
        ws_dyname1   = 'ZSRO_MASTER_DATA'.
        ws_dynumb1   = '0301'.
        ws_dynpfld1-fieldname  ='I_MPRN-MPRN'.
        ws_dynpfld1-fieldvalue = i_mprn-mprn.
        ws_dynpfld1-stepl      = stepl_index1.
        APPEND ws_dynpfld1 TO i_dnpfld1.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = ws_dyname1
            dynumb               = ws_dynumb1
          TABLES
            dynpfields           = i_dnpfld1
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " pstlz1_f4  INPUT
    Regards,
    Prakash.

  • How to create a validation for the project coding mask

    Hi,
    Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
    project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
    mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
    The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
    How can we go about this?

    Hi Jacquiline Bersamin,
    You can use validation with the combination of the level and the coding mask.
    In the validation:
    Pre requisite: WBS level = 1
    Validation: Prps-posid = prps-posid :1-12:
    Message : Error
    If required you can give the parameters for your detail error message.
    Please let me know if this does not work.
    Thanks
    Regards
    Srinivasan Desingh

  • How to create a record for table PLAF with order type 'NB'.

    How to create a record for table PLAF with order type 'NB'(standard purchase order).
    who can tell me the T-code or some usefull information?
    Thanks.

    Hi
    This will be updated automatically when generate planned orders thru MRP. (MD02)
    regards
    Srinivas

  • How to create a validation for version in planning

    Hello all,
    i would like to create a validation for the field 'version'. I have defined 8 different versions, one of them just for planning in orders.
    How can i create a sustitution in order to validate that always that they are going to plan in orders, only they are going to allocate the plan in the proper version?
    Is there another different way to do this?
    Thanks in advance.

    Hi,
    For planning transactions (except for planned settlement), the validation OKC7 (or substitution OKC9) won't work.
    Regards,
    Eli

  • How to create value request for screen field text box tt1

    How to create value request for screen field text box tt1
    i have a text box name tt1,
    i want f4 help for that .
    remember i am asking for screen i.e done from screen layout not selectio-screen.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla,

    Hi,
    Create one Search Help in the SE11 for the particular Field that u want to display. In the Screen(Transaction SE51),For that Text Box in the Attributes,in Dict Tab ->Search Help Field give that Search Help Name.
    For Eg,
    If u want Purchase Order Numbers in that F4 Help.Create one <b>Search Help</b> by giving Table Name as <b>EKKO</b> & <b>Search Help Parameter</b> as <b>EBELN</b> with Lpos & Rpos as 0 & 1.Save & Activate it.
    Give this Search Help Name in Dict Tab ->Search Help Field of that Screen Attributes.
    Regards,
    Padmam.

  • How to create a Tip for a field in a Descriptive Flex Field in Self Service

    How to create a Tip for a field in a Descriptive Flex Field in Self Service ?
    Example :
    For Address
    Each Address Line should have one Tip.
    What should I do ?
    Thanks,
    John

    Hi John,
    It seems you have created Address Location DFF in self service in OA Framework.....
    I have created a Address Location flex in OA Framework . It dipslays the segments properly but i dont want to display the segments if they dont have any value.
    I only want to display segments with values . The segments with null values should not display at all...
    i.e , if Address Line 2 value is null , it should not display Address Line 2..
    If you have done this, pls let me know how to go abt it.
    Thanks in Advance,
    Tanveer

  • How to create a validation for a certain document number range?

    Good Day!
    May I just seek assistance on how to limit a certain document number range from normal posting via F-65?
    The scenario is I would like to restrict, say for example Document Number range 07 from transaction FBV1. How do I create a validation for that? I was thinking what to put up in the Check field in the validation.
    This is how I set up the pre-requsite for the validation rules:
    Pre-requisite:  Transaction Code = FBV1
    Thanks!

    Ok great.. Thanks a lot for the help.If I may just ask one more? =)
    What if the scenario is say creating a validation for a certain GL account group?
    Scenario: User would like to restrict the transaction FBV1 from posting to a GL account group (e.g. G007) ?
    I checked the list of tables and fields in validations, but it seems that the GL account group is not part of the list.
    Any help would be greatly appreciated.

  • How to create Search Help For Ztable fields

    Hi all,
    Please let me know How to create Search Help in SE11(what are the parameter i should pass)
    and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

    hello .
    there are two types of search helps .
    1. elementary search help .
    2. collective serch help
    Below are the steps to create elementary search helps :
    1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose  Create.
    2.then youget a option elementary or collective search as per you r need .
    3.select Elementary search help and choose
    4.write explanatory text in the field Short text.
    5. in the selection method give the name of the table or  a view .
    6 . Select the fields that should be used for value selection  or in a hit list .
    7. then define the attributes of the search help .
    8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
    9 .define the  dialog type of the search help.
    The dialog type tells  how the hit list will be displayed in the input help.
    10 . save and activate .
    plz reward if usefull
    Thanks ,
    Abhishek .

  • How to make a validation for a field?

    Is any possible to make input value
    validation for a field?
    E.g. Force the user enter ItemCode in a
    correct format with proper prefix XX-BB-.... .
    If SDK is a only solution, how to do it?
    Regards,
    Kenneth

    You can't realy do it with out sdk. You could always try to right a query that will clear the code when it isn't in the correct format. then if they press add it will give an error cause there is no item code. But you'll struggle to get this right and it won't be full proof.
    In sdk in your item event you'll test if the specific edit box lost focus and before the action, if that is true then check the value. If it is not correct then bubble the event and give an error. when you bubble the event it won't do the action they wanted to do.
    Hope this helps.

  • How to create a tcode for table maitenance

    i have a ztable which is having a maintenace view now  i have to create a transaction code for the given table maintenance please can anyone give me the details how to create it and what steps i have to follow.

    Hi Suleman,
    1) Go to SE11
    2) In Delivery and Maintenance TAB
    i) Delivery Class as A ( most of the times)
    ii) Data Browser/Table View Maint. as "Display/Maintenance Allowed"
    3) Enter the required fields.
    4) Goto Technical Settings.Enter the appropriate data
    5) Then go to Utilities-->Table Maintenance Generator
    i) Enter the Authorization Group (Varies from project to project...when no authorization required give &NC& )
    ii)Function Group as "Table Name"
    iii)Package varies from project to project
    iv)Maintenance Type as "One Step"
    a)Give overview Screen Number (Your own number..but remember)
    b)Single Screen "Any number"(it can be 0 also)
    6) Then click on the white color create button on menu bar(Create)
    7) To view the maintenance Screen Transaction is SM30(There you need to give the table name)
    8) If you want to change the description of the fields,alignment,mandatory,greying the fields,Validations and many more
    goto SE51 enter program name as "SAPL(TABLE NAME) EX:SAPLZH116 and enter the screen number what you gave in the step 5,iv,a.
    9)If u want to have a transaction to table maintenance
    a)Go to SE93
    b)Choose "Transaction with Parameters" Radio button
    c)Give the Package Name which is given in 5,iii
    d)Give transaction as SM30
    e)Choose Skip Initial Screen
    f)In GUI Support Choose all the three options
    g) In the default values Tab
    Name of the Screen Field Value
    UPDATE X
    VIEWNAME (Enter Table Name)
    After doing this goto se93..in 9(a)
    1.In the home page create a prgm name..
    2.give the description below description choose anyone suitable to ur project
    3.Give the program name and screen number
    4.In sap gui area enable all the check boxes...
    cheers
    Mohinder Singh Chauhan

  • How to create Transaction code for Table Maintanance generator.?

    Hi,
    I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
    Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
    Thanks in advance.
    Best Regards,
    Paddu,

    Hi,
         Check the below steps......
    1. Go to Tcode u2018se93u2019.
    2. Select ' Transaction with parameters'.
    3. Then Transaction 'SM30' with click on skip initial screen
          VIEWNAME : XXX9tABLE NAME)
          UPDATE   : X
    4. Maintain the  Table maintenance generator
      Authorization group : &NC&
      Authorization object :
      Function group : name(xxx)
    Maintenance Screens :
    Maintenance type : One step
    Maint Screen No : Overview screen (2)
    If still u have problem I will send u steps with Screen shot ...send me Yr id.
    Regards,
    Biswanath

  • How to Create an Hyperlink for a field in the table

    Hi
    I am having a requirement that, in a table their is a sales order number field, their will be a lot of sales order numbers, this sales order number to be made as an hyperlink, when i click on the the sales order number it should open another page.
    Now how should i create this hyperlink for that sales order number field. Can any one help me out in this issue.
    Thanks in advance.

    Hi Mani,
    I have a similar requirement but i need to transfer the values to the same page... what then. I have seen the developers giude and the example shows how to tansfer values to another page but no clues what so ever if i have to transfer them to the same page different region. Do u have any suggestions ....
    Regards,
    Amit.

  • How to create a transaction for table maintanence?

    Hi Experts,
      How can i create a transaction for insert/modify/delete entries for a table?

    Hi,
    First u nee dto create Table maintenace genaertor for that table.
    go to se11.--> table name --> change
    Mebu options: > Utilities> table maintenace gen (or Tcode SE55)
    Fill the following
    Authorisation group : &NC&( or group specified by Functiopnal owner)
    Function group:
    Maintrenace type: 1 step
    Maint screen: 6
    SAVE.
    Now after craeting Table maintenace genarator, u haveto attach tcode.
    Go to SE93
    Give ur tcode  for table.
    Check : Transaction with parameters.
    continue...
    Transaction :   SM30
    check SKIP INITIAL SCREEN
    Check all the check boxes of GUI support.
    under Name of screen field :
    TABLE VIEW             : table name
    UPDATE                    : X
    Rvert back if nay issues.
    Reward with oints if helpful.
    Regards,
    Naveen.

  • How to create a validation on number field.

    Hello Experts,
    My database table has a numeric column EMP_ID. I want to create a validation so that a user can only enter numeric value in this field on the Apex page.
    I have tried to create validation Item/Column specified is numeric for item P2_EMP_ID.
    But when I submit the page, I still get the error ORA-01722: invalid number.
    How can I create a validation so that the ORA error is hidden from the end user and instead a custom message is displayed.
    Thanks,
    Rahul

    Rah,
    Are you on 4.0? This functionality already exists inside of apex. In fact, thats the only difference between the number field and the textfield. Once you create a "Number Field" it automatically creates a numerical validation (but you have no access to it). Likewise for setting the "Require Value" setting on a textfield; the creation of a NOT NULL validation that you can not directly manipulate.
    If you are not on 3.2 maybe you can use javascript to restrict the user from entering anything but numerical inputs.
    Alternatively, (not sure of 3.2 support) you can install the MASKED INPUT PLUGIN, and make the mask "?9999999999999" (everything after ? is optional and 9 means only numerical)

Maybe you are looking for