Important! search function for everybody with old version 5G ipod video

Hey everybody. A lot of people want to have a search function on their old version ipod video, as do i. But an update fixing the problem is not in the apple planning. So i called tech support and they made a request to apple for me, telling them that such an update is wanted. But they won`t act on it until they have enough requests. So i`m asking everybody with this problem, and perhaps also people who just want to help, to call tech support (not the apple store) and make a request to apple for them to make this update. If a lot of people do this hopefully we`ll get the update!

You can send feedback to Apple here;
http://www.apple.com/feedback/ipod.html
I don't know if the can or will add this feature, but
it doesn't hurt to make the suggestion using the
proper feedback channels.
Cheers!
-Bryan
Good idea.. I'll do this.
thanks.

Similar Messages

  • N73 - trouble with search function for the contact...

    Hi, i just bought a N73 series phone. i noticed that N73 search function for the contact list is different from others standard. Normally, it should show the 1st contact of the 1st letter that i pressed instead of the contact contains the letter. I found difficulties to look for the contact unless i press 3 or 4 letters. is there any setting can be changed to order search function only search the contacts with the 1st letter that i pressed instead of the letter in middle of the contact?
    For example:
    ang on
    office
    when i pressed "o", the contact will search for "ang on" instead of "office" unless i press few more letters like "off".
    hope to get some help from you guys.

    I found the same problem as this with all my S60 3rd edition phones, what I have done is in my contacts put a hyphen (-)in between the name - i.e Joe Blogs would come us under searches for J & B, so try putting Joe-Bloggs, this way, the search will only come up with all the J's in your phone book directory.
    Hope this helps, DLJ
    DLJ

  • Addons - new versions of addon with old versions of B1

    Hi guys,
    Does anyone know if new versions of addons work with old versions of SAP B1?
    I have a client who is asking for the latest Payment Engine (PL70) but they are on SAPB1 2005A SP01 PL12 which has the Payment Engine PL30.
    My thinking is that you will need to upgrade the B1 app to PL34, if you want to use the latest addon?
    or am i way out and infact the addons work independently of B1 and will therefore work on an old patch of B1?
    TIA,
    John Treweeks

    Hi John,
    Patches are bug fixes and do not change functionality (unless the functionality was broken of course ). Addons communicate through the UI and DI APIs which are installed as part of the patch. Therefore, the theory should be that addons are pretty much patch independent.
    But, as has been pointed out above, it's really difficult to predict exactly what results you'll get. I guess sometimes an addon patch could have been released in order to correct a problem that was both addon and DI API related. In that case, you'd need to install the addon patch and the SBO patch.
    I never recommend you go to the latest patch until it has been around for a few weeks. However, going to a patch that is dated just prior to the addon patch release sounds like a sensible policy. In any case, testing is vital, prior to installation on a production site.
    Kind Regards,
    Owen

  • Search function for Product description in shopping cart

    Hi,
    We are using SRM 5.5 version. We have a problem when we are searching the Product with the Product description.
    Shop -> Create Shopping Cart -> Internal Goods/Services
    Enter a pattern between the stars such as
    *cap*
    and then Click Start.
    System is not restricting the search output with the pattern
    *cap*
    . Instead it is displaying all the Products and search is not getting restricted by the search function.
    When I was searching for an OSS note to fix this issue, i found the note(1322462) to fix a similar issue with the Product ID.
    Do we have any SAP note to fix the issue with the Product Description? Please guide me.
    With regards
    Krishna
    Edited by: krishnadasan on Nov 12, 2010 7:37 PM

    Hi Muthu,
    Current service pack  is SP 13(SAPKIBKT13).
    I believe this SAP note 1322462 can resolve the issue with search function for the "Product ID". I will implement this note and let you know the result.
    Do we have any SAP note to solve the issue with the search function for "Product Description"?
    With regards
    Krishna

  • Crash on search function for HTML Help file (.chm) when connected to a Visual C++ application

    Crash on search function for HTML Help file (.chm) when
    connected to a Visual C++ application
    I use the RH_ShowHelp API command to connect a HTML Help file
    (.chm file generated by RoboHelp Word X 5) to my Visual C++
    application. My application is able to call up this HTML help file
    in context-sensitive mode and everything is working great in the
    Contents and Index panels EXCEPT when I click on List Topics (after
    I enter a KEYWORD for search) in the Search panel.
    I got an error that said “Unhandled exception in
    xxxx.exe.(HHCTRL.OCX):0xC00000FD: Stack overflow”
    I am able to execute this .chm file by itself and the search
    function works well in this case. I am using HHActiveX.dll that is
    created on 2/23/04. Is this the correct version?? Any advice what
    to do here??

    Hi agschin and welcome to the RH forums. The hhactivex.dll
    file is not used by the search function so you can rule that our.
    Have you tried recompiling and seeing if the problem still happens?
    You can also start the Bug Hunter feature in RH - View > Output
    View and then select the Bug Hunter button - and see if that throws
    up any clues.

  • How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

    how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

    how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

  • HT202879 How can I open a file made with old version of Pages (before 09)?

    I need to open a file made with old version of Pages (before 09).  How can I do this?  I only have iworks Pages free with Mac Book Pro.

    You need either Pages '09 or the original Pages '08? programs.
    With Pages '09 you simply open it and it accurate converts it to Pages '09. Pages 5 will open the Pages '09 version but may alter/damage the file.
    With Pages '08 you Export it to Word .doc/.docx with mixed results, then open that in Pages 5 which may alter/damage the file.
    Peter

  • Calendar has been non-functional for hours, with small screen saying "Moving calendars to server account..." Help?

    Calendar on Mavericks MacPro has been non-functional for hours, with small screen saying "Moving calendars to server account..." How can I restore its function?

    Sorry. I found some other advice that solved the problem ere I saw your response.
    The advice was:
    Go to Finder. Holding "Option" key, find Library in "Go" pull down menu.   In Library. Select Calendars. To desktop, drag all files with the word "cache." Then go to Preferences (still in Library) and drag to desktop "com.apple.ical.plist".  Restart. Now Calendar is working perfectly, and rechecking under Library, the caches files and the com.apple.ical.plist  that were dragged to the desktop have reappeared in Calendars and Preferences.
    All is well. Many thanks for your reply! Sorry that I did not get to check it out.

  • [svn] 2569: Adding [HostComponent] metadata functionality for use with Gumbonent skins to provide a

    Revision: 2569
    Author: [email protected]
    Date: 2008-07-22 13:55:02 -0700 (Tue, 22 Jul 2008)
    Log Message:
    Adding [HostComponent] metadata functionality for use with Gumbonent skins to provide a
    strongly typed reference (hostComponent) back to the owning component, automagically.
    Reviewer: Paul (Compiler), Ryan (SDK)
    QA: Yes
    Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/flex4/build.xml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ApplicationSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/CheckBoxSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ItemsComponentSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ListSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/RadioButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarDownButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarLeftButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarRightButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarUpButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SelectorSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerDecrButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerIncrButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/TextInputSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ToggleButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderTrackSkin.mxml
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SyntaxTreeEvaluator.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties
    Added Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentEvaluator.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentExtension.java

    Try assigning a rollover to each conatiner mc as it is created...
    scrollerBase["imageHolder" + i].onRollOver = function(){
          trace("SUCCESS");

  • Deleting old versions of Ipod

    Can deleting old versions of Ipod for Windows in Add/Remove programs safely free up disk space without harming the library? I need to make space on my hard drive! Any info would help. Thanks!

    If you have itunes 7, you can delete/remove all of them. If you want to be on the safe side, remove all but the most current one (aka 2006-06-28)

  • Search function for Catalogue CCM 1.0 SRM version 4

    Dear Experts
    Quite frequently the search function in our catalogue stops working via Display Categories Hierarchically, and when enter description in the find (advanced search) nothing is returned and the only way to search is via the Display Categories as Index.
    The only way to resolve this issue is to republish the catalogue.  We have 2 catalogues, one takes a hour to re publish and the second can take several hours, I am sure this is not best practice.
    Can anyone advise what process should be followed to re start the search functionality in SRM.
    Thanks in advance
    Sharon

    Hi Mikhail ,
    I am new to the SRM scene and I am unsure how to "Could I ask you to create a new support case for BC-TRX component."
    Would this be something I would forward to basis team???.
    I think the short term I will set up a batch job to publish both master catalogues once a week then when I get a new hierarchy struture I will create full master catalogue and load schemas and check out how the indexes are created.
    Thanks for all you useful advise on this.
    Thanks
    Sharon
    no it's not a standard behaviour. Unfortunately it's not clear which TREX process stops to respond : RfcServer or IndexServer. Could I ask you to create a new support case for BC-TRX component.
    Best regards,
    Mikhail

  • Notes on iPhone5 got replaced with old versions after Sync

    I will seriously pay the first person to solve this $20 if their advice helps me recover my current version of my notes.
    I sync'd my iphone5 to itunes in order to have a recent back up but when it was done a bunch of my notes from my phone got replaced with older versions somehow that must have been on my pc. For example, I have a note titled "Car Stuff" where I would keep track of parts replaced, oil changes, mileage etc.
    When the sync was finished, this note, as well as some others were replaced on my iphone by a version last sync'd in September of 2012. This one was not a huge deal to lose although it was mildly important. Some of the others were much more significant.
    I have sync'd before and this situation has never occured. Why on earth would the notes on my phone not just copy the new versions to my pc? Instead, it did the exact opposite! Now I am missing over a year worth of edits to some very important notes I go into on a daily basis. On a side note, I also got several duplicates of some notes but both with the same dates. All my new notes synced fine but anything that existed for more than a year on my phone got replaced with the older version of itself that was stored on my pc.
    A little background and current state of where I am at:
    1) No, unfortunately I never used the icloud. I never needed it until now.
    2) I had the box checked to sync my notes to outlook as I always did previously
    3) I have searched my pc for the name of the notes and I find them in Outlook but only the old outdated versions that are now on my phone.
    4) I went to Genius Bar and they were clueless as to why it happened or how I could get my current version of those notes back
    5) The only old sync's found on my pc are from the last sync I did and the sync from my iphone4 back in Sept of 2012 right before I got the iphone5
    6) I have a college email that uses gmail on my phone (which I heard might backup notes) but when I logged into the email on my pc I don't see anything in the section when I click on notes.
    If I left out any details, or you need further clarification please feel free to mention it and I will clarify. At this point, I feel like all hope is lost so this is probably my last hope before giving up. The edits I made to these notes over the last year are extremely important to me so this is why I am trying desperately to recover them.
    Thanks for any help offered and I am serious about sending whoever finds my solution $20. It's that important to me.

    it appears the actual image is probably in place, but the *preview* is incorrect.  clicking on the image to zoom in causes (the normal) "Loading...", followed by a zoomed in view of the *correct* image.  zooming back out gives the normal view of the correct image.  (*very* good to know!)

  • Search function for own Shapes

    Hallo,
    i want to search for my selfmade Visio Shapes.
    The Visio search function can´t find my Shapes. I copied my Shapes in C:\Users\Username\Documents\My Shapes but is doesent work.
    What´s my mistake?
    Thanks in Advance

    Hi,
    In regarding of the issue, please provide us more information to assist you better.
    Which Visio's version do you use? Visio 2013 or other.
    Did you get some error messages? Like: Could not find a match.  Please search again.
    Did you search the build-in shapes?
    If you can't search all of the local shapes, this issue may be caused by the "windows search" option disabled. Please see this
    thread, I copied the suggestion here:
    ======
    I have new information on the issue with 64-bit systems and Visio 2007/2003 versions.  I was incorrect when I stated this was not able to work properly on 64-bit systems.
    The missing link in our testing has been the enabling of the Indexing Service after the installation of the 64-bit IFilter Pack from the download centerhttp://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=60c92a37-719c-4077-b5c6-cac34f4227cc 
    (Note that there are two downloads - choose the 64-bit one for your 64-bit OS)
    1) Ensure your OS has Indexing enabled:
       Windows 7 and Windows Vista: Control Panel / Programs / Turn WIndows features on or off / Enable "Indexing Service" / OK  [ restart if required ]
       Windows XP: Control Panel / Add or Remove Programs / Add/Remove Windows Components / Enable "Indexing Service" / Next / Finish
    2) Download and install the IFilter pack above. 
    3) Enable Visio shapes indexing.
        a) When Visio is first launched, it may prompt users to enable the Indexing Service.
        b) Manually - Open the Tools / Options dialog, select the Shape Search tab, click on Visio Local Shapes and then click the "Properties" button, ensure the option "Yes, enable Indexing Service" is selected.
        NOTE ... If Visio cannot find its Index catalog, you may see an error "1.  Visio Local Shapes - The Visio Indexing Service Catalog does not exist.  Please repair the Visio installation."  To recover from this,
    close Visio and all other Office applications, and use the Control Panel to repair the Visio installation, then restart your computer.
    Also -make sure that the Indexing Service is actually started, as it may be set to Manual startup versus Automatic.  Check in the Administrative Tools / Services app.
    After these components are installed / configured, restart the computer.  You may need to allow some time for indexing of your local files to be completed.  Once the indexing is complete, you should start to see improved results.  Let me know
    if this helps with searching for Visio shapes on 64-bit operating systems.
    =====
    If you have any update, please feel free let me know.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

  • Ingest new version with old version archived - Revisited & solved

    I couldn't react to the old thread anymore, but I'd like to share the solution with this forum, because it shows the power of the default functionality in the system.
    Start situation: asset is archived, new version comes in, overwrite is set to 'on'.
    What happens and could happen afterwards: new version 'takes the place' on the hard drive of the old version, new proxies are created, the archive flag on the asset is still on. A restore would place the old version back on the hard drive erasing the new version. No new proxies are created, so original asset would be old version, proxies are from new version. New version - Original Media is lost.
    So this is how I solved it:
    I created a subscription - event type = modified - in which the Asset Filter is set to:
    Archive Status EQUALS Offline
    File Modification Date: the Trigger-if-changed box is ticked.
    The response is changing the status of the asset to 'New Version'.
    A second subsription - event type = modified - has the Asset Filter set to:
    Archive Status EQUALS Offline
    (Asset) Status EQUALS 'New Version' with Trigger-if-changed box ticked.
    The response is:
    1. changing the status to 'Completed'
    2. duplicating the file to another device, "Archive_Exchange" (no Asset, no Proxy created)
    3. restoring the (old) file from the archive.
    A third subscription - event type = modified - is subscribing to a job:
    The job filter is:
    Title CONTAINS 'Restoring'
    Owner EQUALS 'admin'
    Status EQUALS 'DONE' - Trigger-if-changed box is ticked
    plus definition of FROM and TO devices.
    The response is:
    Scan the device "Archive_Exchange"; the only metadata which is set here is:
    Metadata Set equals 'Media' and status equals 'New Version'. No proxies needed.
    Subscription #4 - event type = created - is looking for the newly created asset on 'Archive_Exchange'
    So filter is: Metadata Set EQUALS Media, Device (Stored On) EQUALS Archive_Exchange and status EQUALS 'New Version'.
    The response is this time exactly the same response as when this new version had come in while the old version was not in the archive. So it's copying the new version in the usual device, overwriting the old version and that's it! To keep the temporary device Archive_Exchange clean, there is also a delete response.
    It's a little bit 'Working-around-the-bugs', because why is the system copying the new version to another device, while it knows the Original Media is in the archive, but still, it works and the beauty is: no scripts needed!
    Thanks for your input; it made me understand processes better so I could create this monster.

    There are two basic paradigms that you can use to interact with Final Cut Server files.
    One is to let the filesystem be the master. With this, the original files are sitting in the filesystem, and anyone with permissions can mess with them. FCSvr can see changes (via scans) and update itself accordingly. File names must be unique for anything stored in the same directory.
    The second method is to let FCSvr be the master. In this, you don't mess with the filesystem--all file interactions are done indirectly like through watchers, uploads, and archiving/restoring. File names must be unique, unless you create the device as a contentbase device type.
    Each method can make sense at different times. Generally the second is the safer approach, but the first makes sense like for FCP capture scratch folders and production scans.
    If you upload an asset directly to the FCSvr client application, it will provide you with a dialog box to prevent you from overwriting an existing file if there's a name conflict and it's not a contentbase device. (Nick, it will prompt you even if the old file is archived.)
    If you choose to overwrite, the original asset will be deleted and any archive device instance will be orphaned. If that's what you're doing, I don't understand your issue since you told it to overwrite.
    But if you've mixed paradigms by going behind FCSvr's back (via the Finder or Terminal) to copy a new media file into a place that FCSvr knew was reserved by an archived file and would have prevented had you done it through the client app, then you're asking for trouble.
    Your solution options are: use unique names for files, store them in subfolders that are scanned, or store them in contentbase devices. For the first two you can use the project name or number to help make the file names/folder names unique.

  • Ingest new version with old version archived

    Does anyone knows a solution for this:
    My original asset is archived - a new version is ingested - setting is to overwrite the old version.
    Final Cut Server is saving the new version on the local storage, leaving the version in the archive untouched. Proxy and thumbnails are created from the new version.
    In this situation many functions are greyed out. Actually the system sort of only allows the user to restore the asset from the archive.
    Restoring is overwriting the new version with the old version from the archive leaving the proxy and thumbnails as they are.
    So now situation is: old version of original file on the local drive, we lost the new version all together, proxy and thumbnails from new version.
    This is all very unwanted - any solutions?
    Thanks, Henk

    There are two basic paradigms that you can use to interact with Final Cut Server files.
    One is to let the filesystem be the master. With this, the original files are sitting in the filesystem, and anyone with permissions can mess with them. FCSvr can see changes (via scans) and update itself accordingly. File names must be unique for anything stored in the same directory.
    The second method is to let FCSvr be the master. In this, you don't mess with the filesystem--all file interactions are done indirectly like through watchers, uploads, and archiving/restoring. File names must be unique, unless you create the device as a contentbase device type.
    Each method can make sense at different times. Generally the second is the safer approach, but the first makes sense like for FCP capture scratch folders and production scans.
    If you upload an asset directly to the FCSvr client application, it will provide you with a dialog box to prevent you from overwriting an existing file if there's a name conflict and it's not a contentbase device. (Nick, it will prompt you even if the old file is archived.)
    If you choose to overwrite, the original asset will be deleted and any archive device instance will be orphaned. If that's what you're doing, I don't understand your issue since you told it to overwrite.
    But if you've mixed paradigms by going behind FCSvr's back (via the Finder or Terminal) to copy a new media file into a place that FCSvr knew was reserved by an archived file and would have prevented had you done it through the client app, then you're asking for trouble.
    Your solution options are: use unique names for files, store them in subfolders that are scanned, or store them in contentbase devices. For the first two you can use the project name or number to help make the file names/folder names unique.

Maybe you are looking for