Imported animation disappears after being displayed

Captivate 6, Windows 7 64 bit
After I import PP project the slide displays the bullet points one by one and then disappears after the last bullet point is displayed.  How do I extend the display till the narration is completed?

I have discovered the problem.  Slide duration was checked off  after High Fidelity.  Apparently that forces the animation to last as long as the slide
Problem solved.

Similar Messages

  • How do I make drag sources disappear after being moved to the correct drop target in Captivate 7

    How do I make drag sources disappear after being moved to the correct drop target in Captivate 7

    Thank you so much. I could have searched a very long time and not found that. It is counter-intuitive to me that I would set the behavior for the drag source on the properties for the drop target.

  • Imported Objects Disappear After Saving

    I have been working on a project into which I've imported 4 Illustrator objects (If you look at the first image below, the objects are a lightpost, two figures, the word StoryFirst and the word Media). I saved the 4 objects as separate files in Illustrator and then imported each one as "Composition" while leaving the "Illustrator/PDF/EPS Sequence" box unchecked.
    After saving the AE project last night, I reopened the project this morning and found this:
    As you can see, the lightpost and figures objects are still visible in the composition pane, but the StoryFirst and Media objects have disappeared. The files are still listed in the project pane, however, and you can still select the object layers in the timeline and you will get the object wireframes in the composition pane as if they were still there, but the actual objects themselves are no longer visible. As you can see in the picture, when I select a layer of the StoryFirst object in the project pane, the mini-preview in the upper left corner doesn't even display it.
    I've tried closing and reopening the project a few times as well as toggling on and off the eye switch on each layer in the timeline, both to no avail. I also tried right clicking on each layer and choosing "Replace File" and bringing everything back in again new. This makes the objects reappear at the moment I have the project open, but as soon as I save the project again, close it and reopen it, they've disappeared again! All object files are in the same place in my hard drive as they've always been. AE never prompted me with an error message that it couldn't locate files. This is a very bizarre problem I've never encountered before.
    Any help in solving this mystery would be greatly appreciated! Thanks everyone!
    Michael
    Founder/Director, StoryFirst Media
    www.storyfirstmedia.com

    In AI, check your layers palette and inspect the structure of your groups. There may be odd combinations of e.g. groups with empty clipping masks (that cover the entire artboard and are only there, because the graphics were imported from a legacy version of AI or another program). That could lead to misinterpretation where then AE would clip the entire artwork. Similarly, look for things like Livepaint groups or live pathfinder groups. Same for art brushes, pattern brushes, pattern fills etc. In case of doubt, always do an Object --> Expand, then select the artwork and choose "Release Clipping mask". Often a bit optimization will do wonders. Also, one thing that came to mind after I wrote my last reply, is to check your swatches. Since AE operates in RGB mode only, it may not deal correctly with spot color swatches (Pantone) and CMYK swatches...
    Mylenium

  • My bookmarks bar w/zoom in/out feature disappeared after changing display, are they gone gone?

    Out of the blue my freemake video downloader app window opened to a size so lg it covered my taskbar + the "close" button & scrollbar were extended beyond desktop. It was unuseable I had to use ctrl+alt+delete to close it.
    I thought malware may've crawled onto me so I ran malwarebytes, it found a couple files (5-1-5.........)with a long string of #'s & a bunch of OpenCandy files-all were quarentined. No fix After going into display settings, changed themes, started, restarted . I replaced freemake w/a fresh copy.
    In all honesty I know not at what point my button w/arrows (side list of bookmarks I'd copied & pasted the url into (not the usual bkmks) and the toolbar w/zoom options were gone. I've located & opened FF profiles.default & it listed NO profile file in the entire FF Profile folder.. Any where else I might hunt for those separate bookmarks ? I read data, lotsa red underlining? Thank you

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

  • Aperture 3.0 trial "disappears" after being installed. help!

    I've installed and uninstalled the aperture trial for about five times now, and everytime after it has been "succesfully" installed, I try to run it but I can't find it ANYWHERE in my drive. what's going on?

    I tried the import via a new library but it could not due to data missing that is needed. ?? You are correct in that I have not purchased it as I was using the trial first to help decide between it and other options I also tried double clicking on the library and that did not work as it wants to leave old libraries untouched I suppose due to the trial aspect.

  • Images disappear after being selected from galleries

    I created an app in Project Siena that serves as a product catalog for our Remote Sales team to use on their tablets.  The app relies heavily on image galleries for navigation.  Everything works fine, except that as you navigate back and forth
    through the app pages, images that have been previously selected start disappearing from their gallery upon returning to their page.  Anyone seen this happen before?

    Hi Bruton, thanks for the quick response.  I'll try and break this down as simply as possible:
    -Built on Excel tables containing links to images.  The images are located in a mapped network drive that is synced offline. 
    -All images appear fine at first as you navigate through the app; then, as you go back to the Index page and go back through the same pages, you start to see previously selected images disappear from the gallery.  All the other images show up fine in
    the gallery.  Only the ones that have been selected previously disappear.  If you close that app and re-open it, voila, all images display without issue.
    -This same phenomena occurs while running the app in Project Siena; when the images start disappearing, I will update the data sources, and voila, the missing images come back.
    -There are four basic pages that each contain an image gallery: Index, Brand, Group, and Product
    -You drill down by selecting a brand, then a product Group, then an individual product (hence the 4 pages)
    -Note: some "brands" that are chosen take you directly to the Product page, bypassing the Group page
    -The image galleries on each page are used for the navigation (drilling-down to next level)
    -When you tap an image from the gallery, you launch the next page... below is the navigation code for the image gallery on the Brands page.  (I used "UpdateIf" function w/ 1=1 so it's always true, because I wasn't sure how to use other "Update"
    functions.)
    UpdateIf(CollectedGroup, 1=1, {Groups: Group_Gallery!Selected!Groups, GroupImage:Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND}); If(LookUp(ProductTable, Products in CollectedGroup!Groups, Products) = ThisItem!Groups, If(IsEmpty(CollectedProduct),
    Collect(CollectedProduct, Group_Gallery!Selected), UpdateIf(CollectedProduct, 1=1, {Products: Group_Gallery!Selected!Groups, ProductImage: Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND, Groups: Group_Gallery!Selected!Groups})), If(IsEmpty(CollectedGroup),
    Collect(CollectedGroup, Group_Gallery!Selected), UpdateIf(CollectedGroup, 1=1, {Groups: Group_Gallery!Selected!Groups, GroupImage: Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND}))); If(LookUp(ProductTable, Products in CollectedGroup!Groups,
    Products) = ThisItem!Groups, Navigate(Product_Page, ScreenTransition!UnCover, {BackScreen:"Brands_Page"}), Navigate(Groups_Page, ScreenTransition!UnCover, {BackScreen:"Brands_Page"}))
    Here is the navigation script for the Groups page gallery:
    Clear(CollectedProduct); If(IsEmpty(CollectedProduct), Collect(CollectedProduct, Group_Gallery_1!Selected), UpdateIf(CollectedProduct, 1=1, {Products: Group_Gallery_1!Selected!Products, ProductImage: Group_Gallery_1!Selected!ProductImage, BRAND: Group_Gallery_1!Selected!BRAND,
    Groups: Group_Gallery_1!Selected!Groups, GroupImage: Group_Gallery_1!Selected!ProductImage})); Navigate(Product_Page, ScreenTransition!UnCover, {BackScreen:"Groups_Page"})
    Data script for the gallery on the Groups page:
    Filter(ProductTable, Groups in CollectedGroup!Groups)

  • How to set iPhone so Mail messages in inbox disappear after being downloaded to Mail on my MacBook Pro

    Hi -
    Previously, the Mail settings on my iPhone and MacBook Pro were set exactly as I wanted them to be: If I opened a Mail message on my phone, it stayed in the inbox only until I opened the Mail App on my MacBook Pro, at which time it downloaded onto the notebook and disappeared from the iPhone.  This is how I want it, as I have no need for duplicate emails in multiple locations.
    I recently had to reformat the hard drive on the MascBook Pro and reinstall all the software and data.  Unfortunately, I was not able to save the Mail preferences, and now my Mail App works differently: Mail messages remain on both the iPhone and the Mac, and if I delete a message on one device it also disappears from the other.
    Can anyone help me to figure out how to get the settings and preferences back to the way they were originally?  Thanks for any information anyone can provide.
    Shelly

    Are you using Mac Mail - the icon that looks like a stamp?
    If yes, you can create Mailboxes. (click on Mailbox in the menu bar and select New Mailbox...) These are folders and are visible in Mail.
    You store the mail you wish to archive in appropriate folders.

  • Disturbing Messages popping up on ipod and disappearing after being read

    my daughter had an indication of a new message on her ipod touch, not through a text, email or facebook app. One said "do you ever feel like someone is watching you?" and one said "i know you are alone now" (which she just so happened to be), once she reads them, they disappear. is it possible for someone to target her ipod or a coincidence?

    That's scary. I've had an iPod touch for 2 years now and the only time I get messages on my screen is when i get a new message either on facebook, twitter or AIM instant messenger. Is it possible she has an instant messenger App? I would really look into that. Maybe there's something she isn't telling you.

  • Why do imported files disappear after disconnecting the card reader?

    I recently replaced my hard drive and upgraded to OS X Yosemite 10.10. I restored my computer from a backup on an external hard drive. Since then, Lightroom 4 has been losing my files. They appear to import normally and are still in the catalog as long as the card reader is plugged in, but as soon as I disconnect the card reader Lightroom can no longer find the files and they do not show up when I attempt to search for them by name. What's going on? How can I get Lightroom to store my files as it did before?

    Move and Add are normally disabled for non-hard drive removable media. This is to prevent people from losing photos and all the work they might have done on those photos. 
    Normal Procedure is to:
    1. Insert your camera's media
    2. Import into Lightroom using Copy which will make a duplicate of your file from your media and store it on your hard drive (or external hard drive - which ever you specify)
    3. Remove media
    4. Work on your images in Lightroom from the location they were copied to - never from the original media
    Lightroom 4 - Importing and Organizing Your Images | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV

  • Why do my newly imported photos "disappear" after I close the iphoto library?

    I connect my camera or iphone and iphoto automatically opens.  I click on import photos.  Photos are imported successfuly.  I can then crop, rotate, enhance each photo.  I then close my iphoto.  When I re-open iphoto my previously important photos are not there.  If I reconnect my camera it will identify the photos that I just imported as new photo and will import them again.  But as soon as I close iphoto they are not saved.  To make this even more complecated my husbands profile allows him to upload photos.  Why is this happening?

    You're right the adjustments and changes are applied to the library as they are made.
    Is this something that just started happening or is this a new Aperture installation?
    If it has just started happening and nothing else has changed on your system then you should start with the Aperture 3:Troubleshooting Basics. I'd specifically look at doing a permission repair and library rebuild.
    If this is a new installation where is your Aperture library located? Internal or external disk? If it is external make sure the disk is formatted as OS X Extended.
    In either case post back with the specifics of your system.
    regards

  • I need help why does my/our ipod touch apps disappears after being downloaded in the main device

    in my/our ipod touch apps dosen't start downloading it keeps from disappearing
    before i tired the app "Temple Run" that app works why the other apps i install keeps on disappearing.............thnx

    Did you look at this previous discussion that I provided in my first reply?
    ios 6 and macosx 10.5 on a pre intel...: Apple Support Communities
    It say how to use a iTunes version 10.6.3 with OSX 10.5.8 and sync with iOS 5.
    OSX 10.6.8 is a paid upgrade for $29 but requires an Intel Mac. That last OSX for a Power PC G4 or G5 is 10.5.8.

  • Tabs deep disappearing after being set

    I imported a document from (shudder) Word.  I use the menu to Edit/Select All.  I set different 4 tabs by clicking in the bar above the text.
    The initial text is a reference list with similar entries and uses only spaces for indentation.
    I want to get rid of these leading spaces and replace them with tabs.
    I copy the leading spaces and the first letter of the first word of that line.
    I use replace and succesfully replaces the spaces with tabs.
    This works for the first couple of pages of the document and then the tabs quit working as the ditance between tabs following pages randomly grow larger.
    I have YET to find ANY word processor that can use tabs reliably except back on the ancient, but loved, Commodore 64!  It seems Pages will be no exception?!  I hope not.  Can someone please help?

    Hello, as an ex-PC person, 1 month, I'm struggling with tabs, indents and styles.  I'm trying very hard to stick with Pages '09 v4.1.  May I join this discussion?
    I attempt to write radio plays for which there is a strict format.  Essentially a bock of indented text (speech) is set against a character's name.  This can be acheived as far as I can see by either making the document's margin the lh edge of the speech and the lh edge of the name a hanging indent.  This would be acceptable if only one level of block indenting was required.  To clarify sound effects and other instructions as well as certain heading, another "tab" needs to be set to indent this which will often run to more than one line inboard of the speech text block.  I cannot find a way to do this without undoing the first level of indent.
    I'm sorry to mention 'Word', but all I had to do was set two tabs, one for each indent level, for the whole document, type a character's name, press tab then control-T to be able to type a block of text.  To type sound effects/instructions just tab twice etc.
    Is there anything as easy (or nearly) as this in Pages please?  Surely there must be playwrights who use Pages.
    And maybe on ann easier level, why cannot I remove different tab settings from a document without having to go to each line?  Selecting all text first doesn't work.
    Thanks in advance.
    Neil

  • Can anyone help me with why Facebook keeps disappearing after being open for 30 seconds it goes back to my icon screen.

    I Have added and deleted Facebook, I have changed my password. I even got a new phone. Nothing works. My ipad worked for most of Sunday but now it will not stay on.

    I don't have a 4G device, but I thought you can use mobile safari, the safari on the iPad, on 4G.
    You could also try looking for a third party app. The official facebook app has been non to barely functional for years. I use mobile safari on my iPad although I do have a couple  of apps I've used upon occasion.

  • MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    Ive tried using wifi and 3G seperately. Ive tried restarting the phone. Ive tried restoring it from a backup but none of these have worked yet.

  • Contacts will disappear after bulk vCard import

    Hi all,
    After bulk importing multiple 700 vCard contacts to the Address Book application (Version 8.0 - 1371) on Mac OX Mavericks, they disappear after closing and reopening the application, just showing the original 7 iCloud contacts I previously created.
    Facts:
    I am trying to import (by drag & drop) 700 vCards 2.1 - windows latin 1 (already selected this format in the Address Book Settings), created with Outlook 2002.
    Address Book is connected to iCloud
    Already tried, unsuccessfully:
    Merging previously all vCard into a single one.
    Doing the import after disconnecting iCloud, merging the contacts, reactivating iCloud.
    Doing the import after disconnecting WiFi and LAN, merging the contacts (even without reactivating them afterwards).
    Creating a new contact after the import before closing the application.
    The previous 3 combined.
    Importing the merged vCard directly on iCloud (getting Error though the file doesn't exceed the limitations)
    In any case is that after closing the application the imported contact not be there any more: only the 7 iCloud contacts (or the "on this mac" if iCloud deactivated) will remain in the Agenda. I do not think it has to do with iCloud.
    I the only clue I have, is that importing the vCards one by one, or in small groups (>10), they "may" remain recorded in the Address Book.
    Does anyone have an idea or workaround to make this bulk import of vCard contacts?
    Thanks,

    So I had to do it manually... in blocks of 5-15 to see the conflicting vCards, that would not be recorded (and hence not automatically synchronized with iCloud).
    Out of the 712 contacts, 8 were not recognized by the Adressbook.
    No idea why, because the other 704 vCards were in the same format (v2.1) and codification (Windows latin 1), and where having also special characters in the .vcf filename or in the data inside.
    I think there is a codification/import issue that Apple should check.

Maybe you are looking for