Imported AVI - Audio OK - Video will not advance

Long time PP user. Running PP CS4 most current version. Captured DV video with PP CS4 is perfect (PCM Audio Codec; DVC/DV Video codec; 29.97 fps). Used Camtasia 6.01 to capture software training screen & mouse & audio tracks and save as 800 x600 AVI file (Audio codec 0x0055 MPEG-1 layer 3; Video codec tscc TechSmith). The audio & video codecs are installed properly per GSpot v2.70a. Computer is Pentium 4,3.2 GHz,4GB RAM. The Camtasia generated AVI files work fine in Camtasia and in Windows Media Players(9 & 11). When imported to Premiere Pro the audio plays just fine (from both preview and when placed in timeline sequence) - but in all instances (even post render & export) the video will flicker but not advance any frames. The computer is not locked up or frozen in any way. Problem occurs even when captured screencast is at 30 or 15 fps - so it doesn't seem to be an audio-video synchronization problem. It is almost as if the video is waiting for some permission/script/cue to allow the video to advance. In digging through clip properties, settings & project & timeline toggles & options I cannot find any switch that could be related to stopping/freezing the video. To determine whether it was Camtasia software I downloaded some well known other screencast programs and their AVI files (with Audio codec 0x0055 MPEG-2 layer 3; Video codec MP43 S-mpeg 4 verion 3) had the same problem when imported to PP CS4. Any suggestions would be extremely welcome. Thanks.

Marc,
I ran into this problem just last week. Limit your exports from Camtasia to 3 minutes, 30 seconds or less and give it a try.
If your screen caps are longer than that, export them in chunks from C6.
-Jeff
PS - One clue as to whether or not a given clip will exhibit the problem is in the Interpret Footage dialog. If the field order shows up as "unknown", then the clip will not play.

Similar Messages

Audio and videos will not play.

When I synced my iPad earlier it was a bit temperamental but eventually synced. About an hour later I couldn't get any videos or music or anything else to play. Any suggestions?

You might want to post this question in the iPad forum as it is not related to iCloud.

IMovie will not import or play the clips at the proper speed and the audio and video do not match up.

i have a samsung hd camcorder. it records at 40 fps, but iMovie will not play the clips at the proper speed and the audio and video do not match up. I have tried to record at standard quality to no avail. Help. thanks in advance.

samsung sc-hmx10c ntsc
im guessing that is the speed it records at due to the fact imovie puts a blue 40 at the top left corner of every clip i import.

Slide will not advance with audio

I have Captivate 7 I have power point imported in captivate with a premade audio track I have set all the slide advance points but there is one slide no matter what I do when previewing the project it will not advance but if I hit the forward button on the screen it will continue to play the remainder of the way through.Captiv8r

Hi again
Are you able to share your project so someone could see it first hand? Note that I'm not referring to the output file, I'm referring to the source .CP file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Video will not play, yet audio does.

Like the header says, all of a sudden I go to work on a project I've never had trouble with and the video will not play; it is frozen wherever the cursor is. Yet the audio does play. I've tried clearing cache, clearing premiere cache, gone all over the internet to try and find an answer, of course India is closed right now, so no help there, not that they really give it anyway. So I'm asking if anyone might have experienced this one and figured it out despite Adobe. I'm on a PC with Windows 8 and terabytes and terabytes of storage; plenty of space left on disc, too. As I said; this has never been even a hint of a problem Just started up today. This even beats most Adobe "beta testing" problems they heap on us unsuspecting sheep. So I'm completely flummoxed. A prize to whoever knows what's up with this! It's a new one on me... Thanks in advance to whichever genius knows the answer! :-)
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

OK, I found the answer by myself and wish to share it with those having the same issue. It turns out that the saved workspace can corrupt allowing audio to play, while video remains frozen. The fix is to change the workspace. Go to WINDOW, after creating a new style workspace and save the new workspace. Problem fixed. Also, if there are already a number of other saved workspaces that involve video you can simply change to that one and it will be fixed. Delete the corrupt workspace. That's it! This was discovered through a simple process of elimination which proves that bugs really can surface anywhere for no intuitive reason. Hope this helps you!

MAC, importing GoPro 720 video at 120fps, the audio and video do not sync.

MAC, importing GoPro 720 video at 120fps, the audio and video do not sync. Even after rendering, the audio and video are off by several seconds. Any recommendations? Thank you, Troy@

John:
Thanks for your reply. Excuse my referring to you as "Kevin". I'm new to the Adobe Community. I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself. I'm going to try both solutions. Whichever works I'll be sure to reply to the thread with my findings. I found this article which provides the following solution: http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

PPT slides will not advance on their own, pausing automatically in Captivate 6 import

So frustrating, This was working around 8 pm lst nite, then all of a sudden the slides will not advance on their own. I've read several posts and tried most. I've unchecked the compression settings in Captivate 6, made sure I have the patch, I uninstalled 6 and tried using 5.5, then reinstalled 6 with the patch update. I've used Continue on enter and Go to next slide on Exit. NOTHING WORKS! and I need this by noon! what am I doing wrong!! This is Powerpoint 2007 slideshow with animation but no slide transitions going into Captivate 6. Please help I hvave 4 more to do this week by Wednesday.

Hi,
Can you check this in your PowerPoint.
Go to a slide select the object(s) that has animation applied, go to Animation tab and check if the animation is timed to appear ON CLICK with the Slide, that property would not migrate, you should change the drop down to With Previous .
Repeat this for all the animations. Go to Captivate library, if the Presentation is linked you can update it (if it is not linked switch to link from embed)
Thanks,
Anjaneai

My ipod will not advance to next song, how can I fix this?

My ipod nano will not advance to next song, neither in regular play or shuffle. Any ideas on how to get it to work?

Lilly.Love wrote:
Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

Hi, I uploaded some flv videos to my blog and can see it fine on my G5, my the videos will not play in Safari on my iPhone iOS4. Anyone know how to fix this?

Hi, I uploaded some flv videos to my blog and can see it fine on my G5, my the videos will not play in Safari on my iPhone iOS4. Anyone know how to fix this?

I've also tried m4v and avi files. Is there another file format that will work?

Audio and video are not synched

I'm just beginning with FXP X (8), and just added a file to my event library, and created a new project. Dragged my first clip into the story line, and discovered that the audio and video are not syched. This is original footage from a video camera, no modifications or added tracks. But clearly the words of the speaker on camera are not synched with the video, both in the event library and in the story line clip. Is this operator error (lol)? TIA for any help, I'm stuck on square one.

You can right click on your clip in the storyline and Detach Audio.
After that, you can slide the audio until it's in sync or if it changes sync over the length of the clip, there is a way to correct that as well.
First, in the video, skim the playhead until you can see something that will "mark" a specific start of a sound and set a Marker (type M). Then select the audio portion (already detached) and find the start of the matching sound and type M (adds marker to the audio.) Turn on snapping and slide the audio until the two markers snap.
If you need to correct sync drift, use the same technique for markers near the end of the clip, but instead of sliding the complete audio clip, Retime the audio clip (type command-R) (set the playhead over the video marker - snapping won't work when retiming) and adjust the end of the audio until the two markers match up. Preserve Pitch (from the Retime menu) should already be selected.
HTH

Some videos will not play (blank screen).

Some of my videos will not play. I select the video and a "Play" arrow shows in the upper left portion of the screen, but the screen is dark (blank). I can press Menu and return.
I don't believe it's a size issue because certain other larger videos do play. Nor do I think it's a format issue because all of the videos are the same format (*.m4v). It also doesn't appear to be a time/sync issue because some videos added after others do play and some don't.
I really don't have a problem reformatting and starting over if that is the best or only solution as I only use iTunes and don't have calendar, notes, etc.
Thanks in advance.
iTunes Ver 10.5.1.42
iPod Classic 30Gb Ver 1.3
O/S Windows XP SP3

Where are these from? Are they from the iTunes Store or where they downloaded elsewhere and then added to your library? Perhaps you can try restoring your iPod to factory settings and then resyncing the videos back over to it.
If the videos are not from iTunes, perhaps you can try and re-convert them using a third party utility such as Handbrake or MPEG Streamclip.
http://www.squared5.com/
http://handbrake.fr/
B-rock

My video will not show picture only sound? windows 8.1

I did updates yesterday and now this is happening

Hello @34jamie,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your video will not show picture, but the audio will work on your Windows 8.1 computer. Does the video appear and then disappear using media player software? Does this occur when streaming videos on YouTube? Did you perform Windows or HP updates before this issue occured? Does the entire screen go blank, turn a different color or just show blank on the video window you are attempting to view? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number.
How Do I Find My Model Number or Product Number?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

ITunes videos will not play

Ever since I've updated to the newer iTunes version, my videos will not play correctly. Any video I bought on iTunes will not work. Also any video previews or trailers from iTunes will not work. Any other video from online or ones that I've recorded work normally. When I try to play a video, this is what it looks like:
The picture does not show, but the audio plays perfectly. Quicktime and every other software is updated. I've tried to find the answer on the forums but couldn't find one similar to my problem. Also, I cannot contact any apple support by phone because I'm currently living in China and this or e-mail is the most conveinent.
Help!
Thanks,
K.

Hi Oicrylic,
If you are still having video playback issues in iTunes, you may want to try the following user isolation troubleshooting to see if the issue can be localized to either a user or a system level cause.
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Regards,
- Brenden

Certain music videos will not play in iTunes. The music plays fine but not the video. No picture.

Certain music videos will not play in iTunes. The music plays fine but not the video. No picture. Same with the iPod. Other videos in the library play fine. Help.

Regular playlists vs smart playlist does not make a difference. What I noticed is that some videos create this behavior and some not. I created 2 videos and 2 music playlists, one with 2 songs and 2 videos (that I encoded myself with Handbrake). Another list with 2 videos and 2 songs, videos encoded with Handbrake, but that I noticed they triggered the behavior. The first playlist played fine, with no problems. The second one, created the problem. When I look at the video, it is the same type of video (bit rate, audio channels, etc...) I don't see why it would do that.
Later I will test: playing those videos in question and then selecting songs to see if they play.

Videos will not sync to iPhone from iTunes

Movies (Videos) will not sync to an iPhone 4S from iTunes Mac. They can be downloaded and played from iCloud. They sync to other iOS devices, just not this one.
Music does sync as do other media. When I try Movies (Video) I spend long minutes watching "Waiting for changes to be applied". I suspect it's timing out.
I don't see anything in Console. It doesn't matter whether Movie is DRMd or home.
I've restared phone and desktop. I wiped the phone and restored from Backup. I suspect if I wiped phone and treated at as NEW phone it would work, but I'd lose game settings, some data, etc. I haven't tried 'manual' management of music and video, I really dislike that. I did try dragging a movie to the iPhone manually, that behaved like sync.
I've used PhoneView, an OS X utility for browing phone to look for stuck or unexpect media. There are no Voice Memos and no Voicemail messages.
In iTunes, if I expand the Devices tree for the phone, and inspect Movies, I see the movies that have downloaded via iCloud. Movies that are supposed to sync from iTunes show with a grayed out font and dotted viewing status circle.
Any ideas? Any references to a technical description of the iTunes sync process?

A colleague on App.net (@gaelicwizard) came up with the fix for being unable to sync video to the iPhone. It suggests the bug is on the iPhone, and since a wipe/restore didn't fix it the bug is transmitted with the backup.
The fix was to setup iTunes on another account on the same machine, then sync the iPhone to THAT account. This wipes out all media and photos. When I did that I could sync a video to the iPhone.
I then synced the iPhone BACK to the original iTunes account -- this wiped all media again. This time though I could sync video from the original iTunes. I restored all of the media and was good to go again.
I still wonder if this bug is related to the fix for the 7.0 CloudAssets bug that was fixed in 7.1. There was also something odd about the movie 'Frozen' where the Cloud version and local iTunes version seemed somehow different...

Imported AVI - Audio OK - Video will not advance

Similar Messages

Maybe you are looking for