Imported CAD file..multiple line on top of eachother...selecting only the top "layer"

I have imported a CAD file and after closer examination it seems that the file was created with redundant lines on top of each other. Is there a way I can select only the top "layer" of lines?
I say "layer" in quotes because this file has no actual layers.
TIA!!
Dean

Hi,
You can implement mouse listener for panel and you can identify buttons in the panel with the mouse event of panel using MouseEvent.getComponentAt(MouseEvent.getPoint()) instanceof JButton or not.
I hope this will help,
Kishore.

Similar Messages

In printing only a specific selected section, the top line or 2 of the printout is not printing. This only happened since the last update. It does not happen when I use internet explorer.

I read many financial documents during the day. I sometimes print only a selected segment of an article or a financial statement. When I print selected only, the top line or 2 lines is omitted from the print document. It does not happen in explorer.
I used Firefox for years, and this just started in the last 3 weeks or so. I can get around it by just selecting 2 lines above what I want to print. But, it is annoying.

* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working.

Importing CAD files into Illustrator CS3 - does'nt scale dashed lines

In CS2 you could import a CAD file and it would scale dashed lines.
In CS3, Illustrator no longer does this. It scales the stroke weight, but does not recognize the dashed line information.
Is there a solution to this?
Thank you

You can expand dashed lines first and then scale them.
Then you will get a whole bunch of vector objects, one for each dash.
I am not very familiar with CAD, but I know that imported CAD files are sometimes fiendishly difficult to edit because vector lines are often in small pieces that don't join up properly.
So I reckon Expand on all lines and then judicious Unite in Pathfinder would probably be the best way of going about things. Unite makes Compounds of closed paths so you have to be careful, otherwise you might get a huge file that won't print without splitting.
But remember that once you've expanded the lines you won't be able to edit their weight.
Does this help?

I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be

I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be appreciated. Thank you.

wouldnt it be easier if you could do something like this?
https://discussions.apple.com/thread/3392535

How can I recognise the text in only the top portion of a page?

I am using Acrobat XI Pro and wish to recognise the text in only the top portion of a page. The document is made of of pages of music and I only want to be able to search the title section of each page. Recognising the text in the body of the music makes it difficult to search and find each piece. How can I apply Text Recognition to only the top portion of each page? And if possible how do I apply this to multiple pages simultaneously?
The other option I considered was separating each piece into its own file. However it is convenient for me to have all the pieces in one file if possible.

Thanks Test Screen Name,
Yes, "zoning". I can stop trying now.
Thank you

Can I put only the top image of a stack in a Mobile Album?

I have an album that contains stacks and I would like to put only the top images of these stacks in a Mobile Album. Is this possible?
I have tried to make a new album and only put the top images in this new album without sucess. Is it possible to have a stack of images in one album and only the top image in another ablum?
I hope someone knows about this
Hans Brodin

Hi Surendra,
My target is to find a convenient way to transfer my best photos only to my iPad
By using stacks for similar photo and putting my best shot on top I reduce the number of images displayed in the organizer. A typical stack contains of 8 shots.
Then I put my best stacks in an album. By using the Slide Show in PE I have a convenient way to display only my best shot and tha's OK for my computer were I have a lot of disc space.
But on my iPad the size of memory is limited and it also takes some time to transfer a huge number of images so now I want to find a convenient way of tranfering only the top image of each stack. If I could have a separate album containing only the top images from each stack the task would have been easy.
Now this is not possible so now I hope there is another solution than acually making a separate copy (a new file) of each top image and put these copies in a separate album. This will of course work but it will end up in having two identical images showing up in the organizer and so I do not really like this idea.
I hope I have managed to describe my intention and do you have an idea for a workaround or do I need to make separate copies?
Thanks a lot
Hans

Only the top section of safari toolbar is visible

At launch Safari appears as a narrow horizontal strip, only the top of the browser window is visible and half of the website field shows.
Clicking the green traffic light restores the complete window but the toolbar and bookmarks are still invisible, though when the curser moves over some of them they briefly reappear but remain inactive.
Also the content of the window has moved up and ranges from where the toolbar should be, making and top level buttons on a website inaccesible.
I have deleted restarted and reinstalled Safari with no result.

Hi,
Click View from the menu bar then click Customize Toolbar.
Drag the default toolbar or customize.
If that doesn't help, you may have inadvertently installed a third party Safari add causing this.
Follow the paths here.
/Library/Application Support/ Move the Conduit file to the Trash.  
 /Library/Application Support/ Move all of these files to the Trash: SIMBL/Plugins/CT2285220.bundle  
/Library/InputManagers/ Move CTLoader to the Trash. 
/Library/Receipts/ Move ctloader.pkg to the Trash.  
/Library/ScriptingAdditions/ Move any Conduit / CTLoader related files in that folder to the Trash.  
/Users/<User name>/Library/Application Support/ Move Conduit to the Trash.  
Relaunch Safari.
Carolyn

How can I sync ONLY the top photo in the stack?

I sync various Aperture photo albums to my IPad and iPhone. The problem is that when I have 'stacked' images (eg. one image showing in the album and two other copies 'hidden' underneath), all of the photos in the stack are copied to the ipad and iPhone. So instead of seeing just one version of an image, I see as many as are in the stack. How can I sync ONLY the top photo in the stack?
Thanks for your help!

I solved my own problem.
The sync problem seemed to only occur on smart albums. There is a new check box option in Aperture 3 when making a smart album: "sync stack pick only." One click and the problem is solved!

Downloaded latest version of safari and it wont open properly only the top of the page open???

i was running safari on my ibook and all of a sudden it stoped working it wouldnt load the page only the top of the page would load. so i went to firefox but when i stream videos of firefox they always seem to be jumpy. so i have recently downloaded the latest safari again and i am still having the same problem as before where only the top of the page ill load?? i have the latest updates of osx 10.5.8. i believe its something to do with my computer???

iBook G4/1.42 14-Inch (Mid-2005 - Op)                 1.42 GHz PowerPC 7447a (G4)
    Intro. Date:     July 26, 2005    Disc. Date:     May 16, 2006     Order No:    M9848LL/A    Model No:
A1134 (EMC N/A)     Subfamily:    iBook G4 - Mid-2005    Model ID:     PowerBook6,7     Std. RAM:     512 MB    Std. VRAM:     32 MB     Std. HD:     60 GB (4200 RPM)    Std. Optical:    4X "SuperDrive"
      this is the one i have that is the same amount of ram on it to

Itunes app no longer showing genres or the top charts/genius bar in the top bar ... it only displays a faint music in the centre with just the search box..why? i need them back:-(

itunes app no longer showing genres or the top charts/genius bar in the top bar ... it only displays a faint music in the centre with just the search box..why? i need them back:-(

The iTunes Store listing of your podcast is simply reflecting the contents of your podcast feed. Make sure all of the content you want displayed in the iTunes Store is still contained within your feed.
Are you able to supply your feed for reference?

My Laserjet Pro 400 will fax only the top on third of the fax page but I can receive full faxes.

My Laserjet Pro 400 will fax only the top on third of the fax page but I can receive full faxes. But the system works with my older HP Fax Printer. Thank you.

Hi @ 
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Laserjet Pro 400 Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Pro 400 Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gon

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?

Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.

I used the ticker tape mode to add subtitles to a clip. When playing it in the pc, the Subtitles are fine, however, when playing it on the tv, only the top half of the words are visible. Any idea why?

I added subtitles to a movie clip using the ticker tape option. When viewing on the iMac, the words are visible, however, when playing it in the tv, only the top half of the words are visible. Does anyone know why?

I would agree with Keith Barkley, it may be the TV Safe Area. You can see what spots might be blocked out or cut off by going to iDVD and opening the original DVD project, under the View Menu > Show TV Safe Area. If your title gets cut off by the cropping rectangle displayed, that may account for the cut-off.

I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility

How do I move the page-load progress meter from the bottom task bar to the top menu bar, or inside the top/header toolbar? I am currently using Firefox Version 3.6.19

How do I move the page-load progress meter from the bottom task bar to the top menu bar, or inside the top/header toolbar? I am currently using Firefox Version 3.6.19.
URL Eaddress: [email protected]

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You can place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top
The Tab bar only appears on the title bar if the Firefox window is maximized.

Imported CAD file..multiple line on top of eachother...selecting only the top "layer"

Similar Messages

Maybe you are looking for