Imported files to wrong location

I am using Lightroon 4 on a Macbook pro, OS Lion.
I forgot to change the location of all my local wordpress images before importing them to a new folder, and they ended up being moved to my default dated folders i.e. Pictures/2012/2012-01-01.
How can I either undo my last import, or easily locate all of those files I just imported?
Thanks!
Rob

Long shot but try this.
Go to Previous Import in Grid Mode
Select all [CMD][A]
Go to All Photographs (Previous import files should remain selected)
Set the sort order in the Tool bar to Added Order  (Z to A)
Your previous import should be the large block of selected items at the top.
Scroll to the last selected item and the Previous to the Previous import should be the next file.
Select it and hold down your shift key and down arrow until you reach the end of your Wordpress files
The hard part is knowing how far to go to select the files from there.  Hopefully there is an obvious break that will clue you in.

Similar Messages

  • Robo Help Server 8 Publishing files to wrong location

    Hi
    I have recently installed a trail verstion of Robo Help 8 server.  All appears to be ok with the install I can access the website and log into the admin portal etc...  The only diffrence from the default install is that I have configured tomcat to use port 80 rather than 8080.
    However I am having a problem whenever i try to publish a help file from Robo Help 8, I input all of the details of the server <Server IP>/robohelp/server
    put in the default admin username and password and select the general area to publish the help file to.  All of the files appear to publish ok from Robo Help 8 and no errors are receved.
    When I log onto the admin portal of the website the there is nothing displayed in the projects window.  I have check the local disk of there server were robo help is installed and i think the problem may be that the server is putting the files in the wrong location.
    I can see that a folder has been created in the following location
    C:\Program Files\Adobe\Adobe RoboHelp Server 8\robo\server\general\projects\TestProject
    with the following folders within it
    resource
    webhelp_skin_files
    whdata
    whxdata
    However none of these folders contain any data.
    All of the files apper to be uploading to C:\ not the above directory wich is what i would expect.
    If a copy the files that have been uploaded to C:\ to C:\Program Files\Adobe\Adobe RoboHelp Server 8\robo\server\general\projects\TestProject and restart the tomcat service the project then shows in the project window.  However when i click view project all i get is a blank screen.  I have searched the forum but cannot find anyone having a similar issue.
    Any help would be gratley appriciated.
    Below is the config of the Server
    Windows 2003 Server IIS not installed
    Java 6.21
    Tomcat 6.0.29
    Robo Help Server 8

    aha!
    If the firewall is on, turn it off.
    JC

  • ITunes 10.1.1 moving files to wrong location and then losing connection.

    This morning I tried to play one of my albums and it told me it wasn't able to locate the files (on my external disk) so I located them manually and for some reason it has created a new iTunes folder in the root of my HDD (even though the iTunes prefs still pointed at the external disk) and moved the files in to that.
    I deleted the album from the library and then imported the files from the new folder. It imported them fine and copied them to the exiting iTunes folder in the ext HDD but then immediately copied them back to the wrong iTunes folder. Then it told me it couldn't find them again!
    I've now discovered 4 other albums that it's doing the same thing with and no matter what I do I can't get them to import, stay on the ext HDD and remain connected.
    I've re-installed iTunes and restored my library file from before I upgraded to 10.1.1(4) but it's still doing the same thing.
    Any ideas anyone?
    Message was edited by: jontucker

    Same here. Shut off Zumocast and that seemed to solve this VERY annoying and tricky problem. Let's hope that was really it. Thanks for the tip!

  • Imported files into wrong folder, easy way to move them to another?

    Two things happened to me this weekend using Lr that caused files to go into the wrong folders.
    On one import I forgot to change the folder to a new one and it dropped all of my pics from the CF card into an existing folder. Oops.
    On another import I actually had images from what I would consider two seperate events. One was me goofing around taking pictures of the moon and the others were from St. Pattys day at the pub. So I've got moon pics in my St. Pattys 07 folder.
    So is there an easy way to correct this without deleting and reimporting? I tried the obvious drag and drops of selected files in the grid but it seemed adamant that this was a no-no.
    Sam

    Try from the center of an image and you should get a wornng dialogue about moving on the hard drive when you drop them on the folder you want. Hey do have to be all from the same folder for a given move.
    Try selecting some and doing the arrow trick by the filename in Metadata to go to the folder and then move all you want from one folder to another.
    Rather than in All Photos, as I previously mis-stated.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.8 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Importing Files - ACLs wrong on NAS

    Hello,
    i have my Music on an TheCus 5200Pro NAS. If i import new Music over the Menu "zu Mediathek hinzufügen" all ACLs on the NAS ok. As example:
    [email protected]:/raid0/data/Music/Duran Duran/Rio# getfacl "01 Rio.Mp3"
    # file: 01\040Rio.Mp3
    # owner: Udo.H
    # group: smbusers
    user::rwx
    user:Udo.H:rwx
    group::---
    group:smbmusik:r-x
    mask::rwx
    other::rwx
    If i import music over the new "Music Import Folder", the ACLs on the NAS are wrong. As example:
    [email protected]:/raid0/data/Music/Duran Duran/Rio# getfacl "01 Rio.Mp3"
    # file: 01\040Rio.Mp3
    # owner: Udo_H
    # group: smbusers
    user::rwx
    user:Udo_H:rwx
    group::---
    mask::rwx
    other::rwx
    As you can see, the group:smbmusik:r-x is missing.
    Anyone can confirm this "bug"?
    Regards,
    Udo_H

    Although it says importing it does not. Continue playing your files on the card as before.

  • Could not import file to requested location. (48)

    I'm getting to above message on import with a 16GB CF card. Anyone with a solution to this?
    Lightroom version 3.4.1
    Mac Pro quad-Core, Xeon
    OS 10.6.8
    Importing on a firewire CF card reader. Have tried two readers (different brands, but both firewire). Have tried different firewire ports.
    Nikon D3X
    The images show up on import (card ready mounts on desktop) and I can open any of the images.
    I've tried copying the images on the desktop and then importing from there but this also does not work.
    This is a new issue. Has never occurred before.
    Anyone have any suggestions?
    Thanks,
    Ken Loyst
    San Diego

    A similar problem lead me to this post.  2 images on my card couldn't be moved to a perminant file from my temp. download folder* (*a habit I am trying to break from problems I had with LR 1.4 but that is an old story).  I found MY solution on another forum.  Turns out I accidently 'locked' the 2 images when I was trying to get 'info' on the camera screen, both functions are on the same button.  It might help you:
    If you use mac osx you can select all files, request file info and from that window unlock all the files instantly. On windows I'd have to look up at work, but should be similar, no? They might be marked read only, so if you tell windows to remove this when getting file info, should do the same thing as in mac osx. Good luck!
    Hope you find an easy solution.
    Bernie

  • Imported songs go to wrong location

    I have changed the location of my iTunes library to an external hard drive plugged into my Airport Extreme. If I rip a CD the files end up in the correct location. However if I import a bunch of pre-ripped files via the file menu they get put into the ~/music/iTunes folder on my computer. Am I missing something?
    Macbook Pro 2.16GHz   Mac OS X (10.4.9)  

    Long shot but try this.
    Go to Previous Import in Grid Mode
    Select all [CMD][A]
    Go to All Photographs (Previous import files should remain selected)
    Set the sort order in the Tool bar to Added Order  (Z to A)
    Your previous import should be the large block of selected items at the top.
    Scroll to the last selected item and the Previous to the Previous import should be the next file.
    Select it and hold down your shift key and down arrow until you reach the end of your Wordpress files
    The hard part is knowing how far to go to select the files from there.  Hopefully there is an obvious break that will clue you in.

  • Imported Files going in the wrong folder

    Elements Organizer 10 started misplacing all the Imported Files in the folder above at some point.
    In Folder Location view (under Display) I right click folder B and chose Import to Elements Organizer. Once the Import is finished, all photos but one are under folder A instead... needless to say my catalog now looks very messy because photos show in folders with different names. In Finder they appear in the right place, and even the File Properties in Elements show the correct location. Just not the Folders.
    I have about 20k files imported in my catalogue, this started happening recently and affects only files imported in certain external drives or partitions.
    I tried the repairs, optimizations, reconnects etc. for the catalogue, looked for updates and restarted the software many times now.
    How can I fix this?

    Hi guys,
    Sorry about slow time to reply.
    I'll try to be a bit more specific.
    The problem seems to happen only with a new firewire drive, Lacie Rugged 1gb.
    I have Mac OS X v10.6.8, processor 2.26Ghz, intel core duo, 8Gb 1067 DDR3; Elements Organizer 10.0
    The problem happens regardless of how I import the files, ie in thumbnail or folder view, and my procedures have not changed since using previous drives (right click folder and chose Import to Elements Organizer). If I am in thumbnail view or folder batch view the files are there, however having to browse among Ks of files is not my preference, I like folder view better.
    I think the image below explains it better: the folder selected is called Group Tax team day (bottom left). The  photo at the top is actually from this folder, but the one at the bottom (and all the others then) are from a folder called HK Dez 2012, which is the last that was imported directly below. You can actually see that the path at the top of the image does not match the selected folder on the lower left. And btw, this means that the files at the top folder in the drive cannot be found in folder view, since they have no folder to move to.
    Appreciate any help on this!

  • I have recently purchased an iMac from the Apple store. I previously had a windows computer and I transferred all my important files and music from the old computer onto an external hard drive. I've plugged the hard drive in and I can't seem to locate it!

    Hi everyone,
    Before I set up my new iMac, I transferred all my important files from my old windows computer (pictures, documents, iTunes etc) onto an external hard drive. I had no trouble using and locating my hard drive on my old computer, however I'm having great difficulty finding it on my iMac. The external hard drive is plugged in with all wires connected and correct. I've tried all the USB ports and I still can't locate it!
    I just want to transfer everything from my hard drive to the iMac!
    If anyone could help me locate and guide me through the process of using an external hard drive on an iMac, then that would be brilliant!

    Try using Migration Assistant following this guide:
    http://support.apple.com/kb/HT4413#3
    There is advice in this document for using Migration Assistant from Time Machine or other hard drive.

  • Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

    Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

    You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
    https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
    Regards,
    Rajeev.

  • Has anyone seen this before,? some import operations were not performed , could not copy the file to requested location

    some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?

    cormacc57361247 wrote:
    has anyone seen this or have a fix?
    Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions...

  • Where are my important files located in Leopard 10.5?

    I had an old file from apple titled "Where are my important files located?" which applied to 10.3. I could not find this same doc for 10.5. It had the location of all the important files for safari, mail, address book, etc. and was handy when I was mirgrating files or backing up or so forth. Is there now an updated file/doc for this with regards to 10.5 Leopard? Or is every important file's location still located in the same location? Thanks

    Hi Teal,
    I'm a big "foggy" on a lot of the OS X 10.3 "Panther" stuff but I think you'll find OS X 10.5 to be pretty similar in most regards.
    As far as your user information, everything related to your user will be in the /Users/username location. The "Library" folder is probably the most important when it comes to application related data such as Safari, Mail, Address Book, iCal, etc. Some applications will have a folder directly inside the library folder (/Users/Username/Library/ApplicationName) and some will store data in the Application Support folder (/Users/Username/Library/Application Support/ApplicationName)
    The important thing, is that all of your user data is stored in the /Users/Username location that will often be represented by a "House" icon when signed into that user.
    Where it gets a little tricky, is some applications will store data in the /Users/Shared location and the /Library location. So if you ever do a total system migration there's a possibility you'll need to reinstall some applications. A Time Machine backup can assist with system migrations as it does a full and complete backup of your HD, including the User's home folder.

  • Import -File(Subtemplate) for an I.P. Location

    hy people! i have one issue that i cant solve
    when i want import a file that contains a subtemplate and the subtemplate is in local machine i dont have problems: i do: <?import:file:///C:\Xml\dir\header.rtf?>
    in this case the folder of templates are in a server! i try to do <?import:file:///\\192.168.10.5\Xml\dir\header.rtf?> or <?import:file:///192.168.10.5\Xml\dir\header.rtf?> but it doesnt work.
    Someone know if exits another way or syntax to put this work? i apreciate a lot.Tks
    In this case the folder are in E:\JDEDWARDS\E812\XML AND THE SERVER ARE 192.168.10.5. This Folder are shared to the network
    Edited by: user5877544 on 13/Mai/2009 4:43

    Hi,
    I tried using "http", but when i tried to connect to the report from ADF layer, i always get PermGen Space error during the execution of runReport. Any inputs to solve this issue?
    Thanks,
    Pavithra

  • Imported files do not show up in the project menu

    When I import files into a new folder I cannot locate them in the project menu. The files do not have a project path. They show up in the "last import" section though. What's wrong?

    You cannot import files into an Aperture Folder.  Folders hold containers (Folders, Projects, and Albums); they do not hold Images that are not in another container.  Projects and Albums hold Images.
    Right-click one of the Images shown in the "Last Import" Browser, and select "Show in Project" from the context menu.  This should make that Project the active one, and show you which one it is by selecting it on the Library tab of the Inspector.

  • Import files from usb impossible?

    I tried to import a .mov file from usb. by using the import file-command in FCPX. Impossible; the clip is empty with red warningsign. I must first via finder import into the map "film" ("movie") and from there import it (by using the importfile-command in FCPX) in the event and than it works.
    For audio almost the same; first import in iTunes and from there into FCPX using the FCP-importcomand. I think this is wrong.
    Any idea about the reason?

    Is it possible you unchecked Copy files to Final Cut Events folder-in your Import Preferences?
    Because if that's unchecked, then FCP X will go looking for your USB stick to play that file back. And if it's no longer attached to your computer, it will appear as offline- which is what that warning is.
    I have no trouble importing footage from USB into FCP X that I then eject- as long as it's copied over on Import. Remember- "Import" is just FCP X getting pointed to your media. If you don't check, Copy files, the media doesn't move from its original import location and when that location is no longer visible to FCP X- i.e. on a drive that gets ejected- it will appear offline which is probably what happened here.
    Though personally I wouldn't suggest ingesting directly from a USB stick but rather copying the contents from the stick to your hard drive first and then pointing it to FCP X- for improved performance.

Maybe you are looking for