Imported HD video - without timecodes?

I'm importing HD video, and every time there is a break in the timecode (the camera record button was pressed to stop/start the recording) I get a new clip. Is there anyway to make FinalCut Express just record the entire dump in one file?

Tom,
Thanks you are a wealth of information around here. Here's my problem:
Apparently there was dirt on the head, or in the tape, or somewhere along the lines during the recording. This caused tiny little time-code breaks that you don't notice when watching it on the camera (video/audio sound and look fine), but when imported into Final Cut I end up with something like 24 individual videos, and the splice doesn't always cause the audio to end up perfect.
Normally this feature would be wanted, but in this case it is causing me an undue stomach ulcer!

Similar Messages

Ipod Nano 5th GenerationWindows xp. My nano no longer opens automatically with file options menu. Trying to import priceless videos of my daughter from ipod to computer so I run it and get these results: My computer/ipod/dcim/000apple and 75 IMG.DAT

Nano 5th GenerationWindows xp.
My nano no longer opens automatically with file options menu when I connect it to my lap top. Trying to import priceless videos of my daughter from ipod to computer, However, when I run it I get these results: I click onto My computer/ipod/dcim/000apple and 75 IMG.DAT files come up. Now I am almost sure those files shouldnt be on there. If my memory serves me corrrectly the dcim folder is where one should be able to find video recording made with their iopd?If there is a way to import these videos without having to reset my ipod and lose precious videos please please let me know? HELLLLLLP

Try: http://discussions.apple.com/thread.jspa?threadID=743515&tstart=15

Is there a way to import my STD quality video without converting it with another program?

I understand how to import the HD quality video through imovie, but cannot seem to import the STD quality video without first converting it through another program? Anyone know how to do it without the cumbersome converting process? Thanks.

What kind of camcorder did you use to shoot the video?
If you aren't sure, will the STD quality video play in QuickTime Player? If so, click Command-I to open the Inspector and tell us everything listed by the word FORMAT: as well as the dimensions of the clip. (Instead of Command-I you could alternatively click WINDOW/INSPECTOR.)

Importing Video without Fire Wire

How do I import video from my Sony HI8 camera which is not equipped with fire wire. Is it possible to do this using the USB port and if so How. Thanks. I am a Newbee

If your Olympus software is incompatible with Mac, have you tried using a memory card reader to upload those photos? That's the great thing about Macs - you can usually do without the camera drivers and software,
Long story short, I do hobby underwater photography/video and my equipment,while it works fine, is 1990 vintage, bulky, and a pain in the butt to travel with. I wanted to up grade to a camera that was small, would do stills and video and had an underwater housing available. I settled on the Olympus 710 with the 1 gig XD card. Problem was that the salesman told me that it would download into my HP and I could use Windows Movie Maker to edit movies. WRONG! WMM uses .avi format the camera saves in .mov. WMM can't use .mov so i bought a conversion program which converted it to .mov.avi.I now have 3 conversion programs, none of which work and to tell you the truth I wanted to strangle someone. A buddy of mine has a MAC and said it was the answer. I connected my camera to his Macbook and it immediately downloaded the photos and video without Olympus software and I could use the video in Imovie. I am happy. Now I just have to solve the "old stuff" problem. This forum has been very helpful.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

I have a mac mini (without sd/sdhc card slot) and a sony cx160e camcorder and i want to import 50p video files, but i don't want to convert my video's. How can i import my video's?

i have a mac mini (without sd/sdhc card slot) and a sony cx160e camcorder and i want to import 50p video files, but i don't want to convert my video's. How can i import my video's?

Connect the camera to the computer with a USB cable and use the camera as the card reader. Make sure the camera is in playback mode.

Cannot see video without video camera connected, already imported Video

I imported my Video from my Video Camera, but after Editing my Video, when I try to share the video, or create a file, a message appears that says "This Item cannot be shared while referancing media on the camera". Ive made made many movies with prior versions of IMovie, now I updated to 10.0.3, If I disconnect the camera, all the Clips have a Question Mark. Seems like the file is not saved to my Hard Drive.

I can't even see the VPs in order to play them.
Try placing the podcasts in a test playlist and resync your iPod. If neither the playlist nor the files appear on the iPod, they were likely not copied.

Importing analog video using MovieBox DV

I purchased a Pinnacle Studio MovieBox DV Version 9 last February at my local Apple Store. I want to convert old analog videotape to movies in iMovie HD. I'm finally getting around to using the MovieBox, but it's not working. I have a Sony CCD-TRV87 Hi 8 camcorder hooked up to the MovieBox, and the MovieBox firewired to my Mac OS X. The iMovie screen indicates "Camera Connected". When I press "Play" on the camcorder, it plays -- but not on the screen. I realize I need to control the camera with its buttons and not iMovie's. The Apple Store employee I spoke to today said that the cords used to hook up the camcorder to a TV should work just fine hooked up to the MovieBox, but do I need an "S" cable? I am at my wits' end fighting with this, as the MovieBox was an expensive piece of equipment, and I just opened the box. Pinnacle doesn't offer anything but "live chat" for support, and just as I reach #1 in the queue, the session cancels. Funny joke! The "Import" button under "File" is grayed out; I can't even make a "Magic Movie" since the Mac is not communicating with the camera. I bought my Mac a year ago, and have only used it to make two movies, which I've since removed from the hard drive to free up space. What am I doing wrong? Does anyone have any suggestions?

Hello,
Like yourself I purchased the MovieBox some time ago from Apple, to convert analog video tapes to DV and am now finally getting around to working with it. My problem is getting it to transfer the data without timecode breaks. I decided to take a closer look at the "manual" which is limited on information (there is no Mac support on their website) and learned the following; there are 2 DV ports. A & B. A is where the Mode Select switch is. Here is where you select the mode you are working in. If you are using s-video then you select that by pushing the mode button until the LED lights up on that connection. Same goes for firewire transfer mode and composite mode. The one thing you need to know is if you are using s-video, you have to connect the audio connections of the composite cable to get sound (white & red as indicated by the music note graphics on the box) I'm not clear on how the connection to the computer works with the firewire. The manual is confusing in this area. I will have to play with it to figure this out. My guess is, since I'm converting to DV that My VCR should be connected to port B and the firewire to my computer on port A. We shall see...
Hope this helps.
Good Luck

I have a an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes. All of the other movies on the card download with out a problem.

I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.

The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks

Error message: "Attempt to capture video without a video device selected."

When trying to log and capture, I'm receiving the following error message: "Attempt to capture video without a video device selected. Please select a video device in your capture presents and try again."
In Capture Presents under DV NTSC 48 kHz it says "WARNING: Video Device DV Video is missing."
An attempt to edit the Capture Preset gives me QuickTime Video Setting Digitzer options of only "[missing] DV Video."
This happened only after I upgraded to Tiger. I know Log and Capture is recognizing the camera because it's showing the timecodes, but not the image. Any help would be most appreciated.

This reminds me of a problem with the QuickTime install. Try this - remove all the QuickTime associated .pkg files from /Library/Receipts, then go to http://www.quicktime.com and download the full installer and do a complete install.
Post back,
Patrick

ITunes 11 won't import .mov video files from external hard drive but will from internal.

Hi Everyone
I'm having a problem with iTunes 11.0.1. I can't import .mov video files stored on an external hard drive. I can however import .m4v files from the same external drive. Using either the add to library option or dragging files from the finder.
I can add .mov files from the internal though. Strange I know.
The reason behind this posting is that I'm using iFlicks to convert my TV and movies from my external drive for Apple TV and add all relevent meta data, keeping the files on the external drive and having iTunes link to them.
I would like to be able to simply create a general iTune compatiable file using iFlicks which only takes a minute or two per file to convert. I'm currently converting them to .m4v just for the sack of being able to import them into iTunes from an external drive takes 45 minutes per file.
Has anybody else had this problem? Any ideas on a fix to allow me to import .mov files from an external drive into iTunes without copying it to the iTune library file.
Many Thanks
Dave

This might be worth a shot - basically seeing if Vista permissions could be the culprit.
Give yourself FULL control and ownership of the exHD, let's call it M:
How to Take Ownership and Grant Permissions in Windows Vista
Take control of the top level folder and ALL subfolders.
Try creating a new blank ITL file on M: by pressing *and holding* the shift key while itunes starts. See if you can add everything again.

Download and import YouTube videos to iMovie for editing

Download and import YouTube videos to iMovie for editing
YouTube always provides people with raw video materials on all sorts of things happened worldwide in real time. Video lovers are fond of downloading these files as private collection, even using video editors like iMovie to do further editing of their favorite ones, so as to import them to portable devices like iPod, iPhone, PSP, Blackberry, etc. for playback, or upload to their own websites to share with others, or do something else as they like.
However, not all the people have found a proper way to download YouTube videos, not to mention how to add these files to iMovie for editing. YouTube videos are in the format of FLV, which is not a workable format in iMovie, so if you want to import YouTube videos to it without trouble, you should convert FLV files to iMovie compatible formats such as MPEG-4 and MOV in advance. With the special intention of solving these two problems, this guide will show you how to download YouTube videos and import them to iMovie for editing step by step. If you are in need, just feel free to go along with it.
Step 1: Download, install and run Pavtube YouTube Converter for Mac
This converter can process downloading and conversion simultaneously. Once you launch it, the interface below well pop up.
Step 2: Add URL, select output format and set save path
Press tag “Add URL” in the above interface, and then the following window will appear. Just copy and paste the URL of the YouTube video file which you want to download and convert to the text box after “URL”. Then select a supportable format for iMovie by clicking the drop-down list of “Convert To”. Here I choose MOV for example.
Afterwards, you can insert the storage file name in the text box of “Save As”, if not, the program will generate one automatically. Here I save my file as “mycollection”. Meanwhile, you are allowed to hit “Browse” in the opposite side of “Save To” to specify the destination folder. By the way, if you want to save the original FLV files, you are allowed to tick the checkbox “Save FLV File” to achieve this goal.
Step 3: Custom
This program enables you to adjust video and audio parameters like codec, bit rate, aspect ratio, frame rate, sample rate, and channels, so that you can change them randomly according to your own demands. Generally speaking, the options which refer to values are always in condition of the larger values, the larger file size, but better quality. Do remember click “OK” to save your custom settings.
Step 4: Download and convert
Once all the settings are done, you can click “OK” button to start. The following window will show you the progress of downloading and conversion.
Step 5: Import the output MOV files to iMovie
As soon as the YouTube video files have been downloaded and converted to MOV or other iMovie workable format, you can click “Open” at lower right corner of the above interface to find out the output files. Afterwards, launch iMovie, and click File > Import to add the output files to iMovie for editing.
Tips:
1. This program supports batch tasks so that you can download multiple YouTube video files in batches at a time.
2. Pavtube YouTube Converter for Mac adopts multi-threading technology, which makes its download speed is faster than any other similar YouTube downloader.
3. Besides YouTube.com, it can also automatically detect and download online videos in the format of .flv, and f4v from many other video-sharing websites, like Yahoo Video, Myspace, Google Video, Fox and more.
4. It also provides users with conversion function, with which you can convert any YouTube FLV/F4V files to other formats like MP4, MKA, WAV, AC3, MKV, FLV, MP3, M4A, 3GP, AVI, MOV, MPG, etc. at will.
5. If you only use it as a YouTube downloader without format conversion, you can take it as a piece of freeware.
All right, this guide is ending up now; hope it will do you a favor while downloading video files from YouTube as well as importing them to iMovie for further editing.

It's a clip from CNN (with all credits etc. added). When one refers to it as a clip posted on "YouTube", then people understand the quality will be poor.
I've watched television go from everything shot on a tripod with clean, meticulous editing rules, to almost anything goes. It has to do with cultural reference.

Importing VHS video into FCE4 via a camcorder

Hello,
I’m trying to import some old family videos that were recorded on an old VHS camera (now long departed) into Final Cut Express 4 using a Sony DCR-TR330 camcorder & a VHS player.
The camcorder is connected to my iMac via the firewire interface, the VHS player is connected to the “audio/video” input on my camcorder
When I press play on the VHS player the video appears in the Final Cut Express 4 capture window (the audio also plays) When I click “Capture Now” on the capture window I get the message:
“Waiting for Timecode
Device must be in VTR mode when Device Control is enabled”
If I first record the VHS video onto a Hi8 tape in the camcorder, I can then import the video (& audio) into FCE4 using the “Capture Now” button.
Is there any way to import the video straight into FCE8 instead of first having to transfer it to the Hi8 format.
Thanks for any help.
John Hutchinson

Many thanks for your prompt reply,
I am now able to capture straight from VHS to FCE4
Kind Regards
John Hutchinson

How to import wmv video tracks in Premiere Pro CC on mac?

Hi,
Is there a way to import wmv video files in premiere without converting them before?
I'm aware, that exporting is another topic, i'm only intrested in importing.
I only found the information, that AME is able to import WMVs after installing Windows Media Player for Mac (http://forums.adobe.com/message/4031104), but is this also possible in the same way for Premiere Pro?
Thanks a lot in advance.

Were you ever able to find a solution for this? I am working on a project that has some .WMV files and trying to import them in Premiere Pro CC on a Mac. Thanks!

Cannot import any video files.

I installed CS3 Master Collection, I tried importing a video file into Encore and Premiere Pro and it worked fine. That was 2 days ago, now when I try to import the same video file into either program the 'Import as asset' window pops up as normal but just sits there and does nothing. Then the program comes up with (not responding) and I have to shut it down. I have not changed or installed anything new on my machine.
Machine Spec:
Vista Ultimate 64 (fully updated).
Intel core2 duo E6750 2.66GHz.
4 gig OCZ DDR2 PC8400.
Gigabyte P35C-DS3R.
Nvidia BFG 8800GTS.
Creative X-Fi Extreme Music sound card.
I have since uninstalled CS3 and reinstalled it and I am still experiencing the same problem. I can import any other type of file (images, audio etc) I am only having this problem with video files.
Any suggestions?
Thanks
-Dio

Keep in mind that Vista is good enough to boot your computer, loads a bealtyful GUI, wallpaper loads and mounts the desktop icons. After that the computer works fine. The clock is ticking on the side bar, pictures changes on the middle of this bar, some another gadgets loads and so on . After short period of time, the screen saver starts. Wow vista works great! This is all that vista is capable of. Our problems with vista begins when we click in something. Believe me, i have 26 years of experience with computers. Downgrade to XP64. Your CS3 will work without problems. I have a computer with quad core, 16Gbytes of 667RAM, quadro board, and even in this monster Vista do not works with a long sort of problems. After the downgrade, my problems dissapear. CS3 works very well.

Imported HD video - without timecodes?

Similar Messages

Maybe you are looking for