Imported images only show up as .jpg ... what to do??

I have just imported 1000 images from one drive to another ... they were all captured in RAW+Jpeg ..

Sorry -- i hit the button too early ..
So, I moved these files over (imported ... copy from one drive to another) ... but they now show up only as .jpeg ... usually they show up as crw+jpg
How do I get them moved as .crw+.jpg?
Thanks in advance for your help
Halboye
[email protected]

Similar Messages

  • I have 100  songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itunes

    I have 100  songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune

    If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
    Next
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Google images only showing first page. Any solutions yet?

    Hi
    I've recently come across this problem of Google images only showing the first page of images with the rest being blank grey boxes.
    After trawling the web for days it seems this has been an ongoing problem for many for several months now but I haven't seen any solutions that have worked for me.
    I've cleared the cache and temp files, I've un-checked 'disable or replace context menus' on firefox etc.
    It seems to run ok on ie8 but I prefer to use Firefox if at all possible.
    Is there a solution out there?
    I am on XP Pro sp3 using FF 3.6.11

    This was happening to me (only getting one page of images after a search.) I disabled the AdBlock Plus ad-on and the problem was solved.

  • Imported Photos only show up as Rejected

    Hey All,
    Did some searching but couldn't find anything that described my problem. I recently imported photos from 3 memory cards into three separate new projects. All of the imports worked fine (was importing directly from camera) and I left Aperture to create the previews/thumbnails etc. I came back to everything completed and shut down the program.
    The next day I notice the start up screen doesn't tell me I have any pictures that haven't been updated in a vault (odd because I hadn't updated with the newly added pictures). I find all the images in all three projects are not there. I go into the external drive that houses my Aperture library, 'Open Contents' etc and get to the new projects, all the photos are there physically on the drive, inside of my Aperture managed library but do not show up in Aperture at all. Nothing in my 'Added in last week' folder, nothing in Rejected folder, nothing in All Photos, and nothing in the individual projects. On a whim I decide to search rejected photos in each project. Low and behold there they are. Okay, I re-tag every photo with 1 star, they show up now in unrated or better, but this goes away when I re-boot Aperture. Now I have a bunch of photos rated at one star but only show up when I search 'rejected' in the individual projects and don't show up in any of other folders I mentiond or any other search.
    I tried:
    -updating Aperture
    -copy/pasting the projects out of aperture library and importing whole projects.
    -moving pictures to different projects
    -re creating previews
    Nothing has worked, anyone heard of this before?

    Just to clarify,
    1) is the problem limited to the same exact photos, no matter where they go in the Library?
    2) Did you try making fresh new versions from the same masters, and deleting the old probelatic versions, to see if new versions had the same problem?
    3) were all photos from the same import session affected, or, all imports from the same day?
    4) Have you had any further problem with newer imports (test shoot & import)?
    If "YES" to #1, there has to be a common link between these individual photos. It's highly unlikely that the master files are at fault, because rejects/ratings seem to be Aperture-specific metadata tags and therefore assigned only to the versions, not masters. See if generating new versions from the master file might fix the problem, but DO NOT lift-stamp any metadata from old problematic versions onto new ones.
    Hope this helps narrow things down.
    best,
    Jin

  • Imported images not showing in catalog

    I have imported images from my Canon 5D markIII and somewhere along the way, I've made an error in the settings.  The images are on my computer but not showing up in a folder in the LR4 catalog...how do I get them into the catalog?  When I try to find them, they are all greyed out and I can't move them - a message says that it seems that duplicates are already on the computer (or something like that).  Can anyone guide me through this?

    uncheck "don´t import possible duplicates" in the import dialog.
    this is a screenshot from the german version but you should be able to find that checkbox:
    http://i.imgur.com/S4EcC.jpg
    when you are sure they are in a folder on your harddisk you have imported into LR already, but they don´t show in the LR catalog, then rightclick on the folder in lightroom and choose "syncronize folder".
    a windows will come up with different options you can choose.
    you can search for new files in the folder and import them into lightrooms database.
    or delete files from the database when they are not in the folder anymore.

  • Newly imported photos only show up in "photos" and not "events"

    When I import photos, why do they now only show up in the "photos" section of my library, and not "events"? I see them in photo stream, but that's not what I'm talking about. I'm talking about the left-hand column in iPhoto, the sections under "Library."  I saw on the answer to someone else's question that photos can only be in one place at a time, either "events" or photo stream, but then why are they also showing up in "photos"? And I use the "events" thing more than I do photo stream, so I'd like to be able to just automatically have all my events there--OR see photo stream organized by events as well. Does anyone have any suggestions?

    why do they now only show up in the "photos" section of my library, and not "events"?
    If they are in the Photos listing then they are also in Events somewhere. These are two view of exactly the same material - two windows into the same room, as it were.
    Right-click one of the photos and select 'Show Event' from the resulting menu.

  • Imovie 11 'import from' only shows built-in isight and not iphone

    I just plugged in my iPhone 5 and iPhoto recognised it and imported OK.  However when I switched to iMove 11 th eimport box didn't pop up. So I clicked on the camcorder icon to import from the iPhone, but it only shows the built-in iSight camera.  I have restarted both iMovie and the iPhone (done a soft re-set too) but the import box does does not pop up automatically and the camcorder button brings the box up but no Iphone seen.  Interestingly it works fine with my wife's iPhone 5.  Any thoughts please?  How can I 'force' iMovie to 'see' my iPhone?

    First make sure that there are still movies in the Camera Roll.
    Another thing to try. Open Image Capture utilty and plug in your iPhone. You can set it so that the default app is NONE rather than iPhoto. So you can plug in your iPhone without iPhoto opening.
    File/Import from Camera should work, but that is the same thing as the camera icon that you tried.
    Another thing to try, since your wife's iPhone is working. Power down your iPhone all the way by pressing and holding the on button at the top, then swiping. Then restart the iPhone. And try again.

  • Images some old loading new imported images not showing

    I am working with cs4 /windows.  I can not get new images to show.  When designing the page and importing the images it shows. When "putting" publishing it does not show.
    The only thing I could see as a problem would be old (very) server?.
    I left some images that were on the server to begin with and they show up. The newly added images do not.
    http://www.twinsburgtravel.com/sandals-resorts.html

    checking into that... I am thinking it is the server being old and not being able to handle space and new images.
    thanks! will get back to you on this later this afternoon.

  • When I record anything or share my screen on my iMac it only shows my mouse. What am I doing wrong/how do I make it show the rest of the screen too?

    I am trying to record my screen on my iMac for a youtube video. I am using Debut (a screen recording program) and whenever I record the screen, the resulting video is always only showing my mouse movements and not anything else i.e the actual windows etc. This also happens when I share my screen on skype! How do I make the other parts of the screen show up and what am I doing wrong?!
    Thanks!

    Hello Ian,
    No idea really, but are there other computers locally that you can test regular Screen Sharing locally both ways?

  • After Effect Composition turns black with importing images only

    Hi my compositions layer in AE suddenly disappear, how can I solve it? I have just importing the images only.

    As Mylenium says, it appears that you're looking at your layers edge-on in Left view. Switch to Active Camera view.

  • IMac only shows Thunderbolt sign? what can I do?

    Well i just bought an IMac..then it made noises similiar to drums so I restarted my IMac when it turned on it only shows the thunderbolt sign...

    If you've scoured the web and got nothing else, bring it right back to the store with the receipt asap.

  • Imported images not showing.

    Hello,
    I recently updated to iphoto 08. I've done 2-3 imports since the update. I see all my photos on the update screen, but after the import I click on library / photos and I see only some of the images that were imported. This has happened all three times. If I search for the image names of the missing photos they still exist, but they don't show anywhere in iphoto. When I try to reimport them it says they already exist. When I import them anyway I then show 2. What gives? =0)
    I have rebuilt the library, thumbnails etc.
    Thanks,
    Shawn

    Shawn:
    Are you getting no thumbnails for those missing image files or thumbnails but no large image when you click on the thumbnail? If you're getting "!" in the large window iPhoto has lost the link to the original file. You have a couple of options.
    1 - download and run the iLife Support 8.1 and iPhoto 7.1 updates.
    2 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
    3 - If that doesn't fix the library you'll have to start over with a new library and import the Originals folder from the old one as follows:
    Creating a new library while preserving the Events from the original library.
    Move the existing library folder to the desktop.
    Open the library package like this.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Image only shows after screen is reloaded (hidden and showed again)

    Hello everyone,
    I have a class that calls a drawImage. The thing is that it was supposed to be shown when the JFrame is shown, but it isn't. It is only shown after I hide it and show it again (like after I minimize it and minimize it back.
    Can anyone help me here? I need it loading without nothing being done by the user.
    Here goes my class:
    import java.awt.*;
    import javax.swing.*;
    import java.awt.geom.*;
    import java.awt.image.*;
    import java.applet.*;
    import sun.audio.*;
    import java.io.*;
    public class Shapes extends JFrame
        public Image imagem;
        public Shapes(Integer resultado, Image imagem)
            super("Grafico dos Valores");
            setBounds( 0, 0, 900, 570 );
            getContentPane().setLayout(null);
            this.imagem = imagem;
            setVisible(true);
            getGraphics().drawImage(imagem, 20, 20, null);   
        public void paint(Graphics g)
            super.paint(g);
            Graphics2D g2d = ( Graphics2D ) g;
            g2d.drawImage(imagem, 20, 20, null);   
        }

    1) Swing related questions should be posted in the Swing forum
    2) Don't override the paint(...) method of JFrame
    3) Don't use getGraphics to draw your image
    4) If you need to do custom painting then override paintComponent(..) of JPanel or JComponent
    5) Read the tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/14painting/index.html]Custom Painting

  • Please help! Image only shows when i use Applets instead of Frame/JFrame

    The following classes don't work because the Canvas shows just background colour. However, when I let my class "MyContainer" extend Applet instead(and running the Applet instead of the StartUp class that creates a JFrame) of Frame/JFrame i get my Image on the Canvas showing, WHY?
    code:
    public class StartUp {
    public static void main(String[] arg) {
    MyContainer my = new MyContainer();
         my.setSize(500, 400);
         my.setVisible(true);
    public class MyContainer extends JFrame {
    MyCanvas m;
    public void MyContainer() {
         m=new MyCanvas();
         this.setSize(320, 320);
    this.setLayout(new GridLayout(1, 1, 0, 0));
    this.add(m);
    this.setVisible(true);
    public class MyCanvas extends Canvas {
    Image im;
    public MyCanvas() {
    im=Toolkit.getDefaultToolkit().createImage("c:\\miniferrari.jpg");
    try {
    jbInit();
    catch(Exception e) {
    e.printStackTrace();
    public void paint(Graphics g) {
    g.drawImage(im, 0, 0, this);
    private void jbInit() throws Exception {
    this.setBackground(Color.darkGray);

    as you are using a JFrame, you should refer to it's contentpane:
    this.getContentPane().setLayout(new GridLayout(1, 1, 0, 0));
    this.getContentPane().add(m);

Maybe you are looking for