Imported loops are missing in the loop browser

I have been having this problem ever since I purchased my mac last September. I tried upgrading to iLife '05 and Garageband 2 to try and fix the problem to no avail. I have checked (and doublechecked) the loop indexes for Garageband. There are three of them. The first is for the original loops included in Garageband. Then there is the single loops folder. Finally, there is the loop index of my Soundtrack Loop library that I am trying to import. I should note, here as well that it HAS successfully indexed the entire Soundtrack Loop library. Even the loops that don't show up in the loop browser are accounted for in the loop index. Also, I have confirmed that all of the actual files are where they are supposed to be, referenced to by the index. I have tried reinstalling Garageband 2 twice, and found no change. Any other advice in this realm would be hot.
Thanx,
Ben

That's correct, 2 semitones. And of course you don't turn off the keyword browsing with this checkbox, you can still browse the loops by keywords. You turn off the "filter for better results" that doesn't show you the loops that are more than those 2 semitones away from the key that you set for your song. What you can't turn off is that the loop browser only shows you loops that match the measure of your song - so you get very few when you use an exotic measure.

Similar Messages

Only some of my installed loops are appearing in the loop browser

I'm fairly new at GB, but I thought I used to have more loops when it was first installed. One of the recent updates may have changed things?
For example, I can now only see four Acoustic Pickings: 04/05/19/21. This is with no filters applied in the browser of course.
Does that seem right? If I look in my Apple Loops for GarageBand folder in /Library/Audio/Apple Loops/Apple, I see Acoustic Picking 01 through 21 inclusive -- that's 21 .caf files, not just the 4 visible in GB.
I have tried re-indexing (multiple times) using this tip, with no change:
http://www.bulletsandbones.com/GB/FAQPages/ReIndex.html
Is this a known issue or am I missing something please? Thanks!

Thank you HangTime (and the trusty FAQ) -- this was my problem:
Turning off "Keyword Browsing" in GarageBand's preferences will allow all Apple Loops to be displayed regardless of key (the time signature requirement still applies).

All my loops are present in the browser, but when I drag a sound over it doesn't match. With beats, I get no percussion sounds, just a basic 8-bit type sound.

I had a critical failure on my Mac and have slowly been rebuilding it, but Garageband just doesn't want to cooperate. This is actually a two-fold problem. First problem is; all of my loops are in my browser and when I click on one for a preview sound, it works fine. But, when I drag it into the project window I lose any the correct sound. They still have sound, but it will be a basic "blip, bloop" type 8-bit sound. This is namely with any kind of beats or percussion. Say I try to use a Trip Hop loop, all I get is the blips and bloops but no hi-hats, no snare, no kind of percussion sound at all.
Second problem: As I said before, all of my loops are correct in my loop browser, but they didn't seem to transfer over the MIDI sounds that I can usually choose from in the Track Info pane. It still only has the most basic sounds to choose from. Before, I had all the different MIDI sounds to choose from, such as Star Sweeper and the like, but those are all gone. I've tried to drag-and-drop into that pane but it won't let me.
I really hope that someone has an answer for this, I have a lot of projects I've been working on for a long time that are basically trash right now because I can't do anything with them.

Missing Instruments:
The pop-up menu at the top of the track info pane filters the instruments: Make sure it is set to "show all".
I am not sure at all about your drums, however. You do not drag your drum-loops to tracks with different instruments, do you?
What you describe, looks exactly like something where transposing the drum loops and shifting the notes. This would cause the beats to be mapped to different instruments. And this is not suposed to happen, when you set the key of your project or transpose the master track.
Does this happen only in your account, or also when you launch GarageBand form a diffrent user account? You might create a new account forr testing, to explore this.
Regards
Léonie

Loops appear twice in the loop browser. Huh?

I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
Thanks in advance,
Steve
G5 Dual 2.3, G4 Powerbook Mac OS X (10.4.3)

Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
- the general Library/Audio folder
- the user Library/Audio folder
- the general Library/Application Support folder
- the User Library/Application Support folder
Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser.

Why are some of the loops in GB 'greyed

Why are some of the loops in GB 'greyed out' " I'm specifically interested in 'slide guitar' for example and cant find a reason why there's no access. My iMAC was bought in April 2010??

Court Kizer wrote:
Would you please stop spamming every single apple garageband discussion forum with your website. It doesn't have the answers on how to force the loops to download.
You're using the forums to spam your site in almost every single thread, and wasting users time.
Have to disagree with you there, Court Kizer. The Bullets&Bones site is, in many ways, where I really learned how to use GarageBand.
Take a look at the list in the Top Users box on the right. Those points are awarded by people who got their answers from the advice posted.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

Default parameters are missing in the cloned EUL

we have discoverer up and running perfectly on our existing instance - SIGMA
now we have a new instance - ALPHA,
we cloned the whole EUL from old instance(SIGMA),
IN ALPHA every thing is working fine, we have all the BA,folders and all the workbooks seem to work fine, but we have a issue with the default parameters.
the default parameters are missing from the workbooks, now this has become an big issue, because we have hundreds of reports and user want need them all with the default parameters
could somebody please help me on this issue
few questions:
when cloned does the default parameters get erased??
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??
Could you please give me a best approach to bring in thoese default parameters??
any thoughts are highly appreciated
note: i can edit the worksheet and enter the default parameter and save the worksheet but we have got some hundreds of workbooks

Hi,
when cloned does the default parameters get erased??I would be surprised if the default parameters are erased. More likely is that they are not being used because the default value is not valid anymore or because Discoverer is trying to use the last parameter value. Check the value of the SaveLastUsedParamValue preference setting. Is this the same on Desktop, viewer and Plus?
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??The default parameters will be save along with the workbook in the EUL5_DOCUMENTS table. The field is of type LONG RAW so you won't easily be able to see this field. You can use the workbook dump utility to check whether there are default parameters actually set up in the workbook.
Could you please give me a best approach to bring in thoese default parameters??You could try exporting and importing the workbooks into the new environment to see whether this fixes the issue.
Rod West

Events are missing in the calendar in Month view in Blend

Type :
Bug
Initial condition :
The blend software is running. The calendar view is opened.
Action :
Select the month view.
Expected result :
All events are displayed for each day.
Obtained result :
The events of the previous month are missing.

Having the same problems where the UI elements are missing in the layout screen.
using the Show/Hide layout Preview Button I get an Program cannot display the web page.
The server is on a different box . Tried running the sapgui from a vista machine and a xp machine and they both have the same problem.
If I run Sapgui on the server box the Show/Hide layout Preview Button does show a subset on the ui elements but not all the examples described in the "ABAP Trial Version for Newbies: Part 18 - Starting with Web Dynpro for ABAP"
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1299772950DB10354599868941910736End?blog=/pub/wlg/6973
Thanks in advance.

I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.

I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.

The iphone is not storage/backup device.
The sync is one way - computer to iphone.
The only exception is itunes purchases. File>Devices>Transfer Purchases
You should copy everything from your old computer, or your backup copy of your old computer, to your new one.

I recently removed an outlook account and now all of my calendar events are missing. The majority of them were added from my iphone 4s. How do I retrieve the events? Backing up with iCloud did not help, as I assumed it would.

I recently removed an outlook account and now all of my calendar events are missing. The majority of them were added from my iphone 4s. How do I retrieve the events? Backing up with iCloud did not help, as I assumed it would.

Outlook is a mail client for PC's (and Macs). It is not a type of account. Do you mean an "Exchange Account"?
If so, then re-add it. The calendar events live on the Exchange Server. The only way to get them back is to re-add the account to the phone. The contents of Exchange and IMAP accounts are not part of the 'backup' as they already exist elsewhere.

UI elements are missing in the layout of a view

Hi Guys,
I've downloaded New SAP NetWeaver 7.01 SP0 ABAP Trial Version. After three times installation, I gave up.
And I downloaded New SAP NetWeaver 7.01 SP3 ABAP Trial Version, it took more time than SP0 to install. Finally, it works.
Then I read this blog, /people/dirk.feeken/blog/2007/07/20/abap-trial-version-for-newbies-part-18--starting-with-web-dynpro-for-abap, to develop a Web Dynpro report. After copy the context from component controller to view, I couldn't find UI elements in the view.
What I could see in the layout of the view are:
CONTEXT_MENUS
ROOTUIELEMENTCONTAINER
Does anyone know how to find the UI elements?
Thanks in advance.
Regards,
Jim

Having the same problems where the UI elements are missing in the layout screen.
using the Show/Hide layout Preview Button I get an Program cannot display the web page.
The server is on a different box . Tried running the sapgui from a vista machine and a xp machine and they both have the same problem.
If I run Sapgui on the server box the Show/Hide layout Preview Button does show a subset on the ui elements but not all the examples described in the "ABAP Trial Version for Newbies: Part 18 - Starting with Web Dynpro for ABAP"
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1299772950DB10354599868941910736End?blog=/pub/wlg/6973
Thanks in advance.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now I get "Some of the application components are missing from the Application directory, Please reinstall.."

PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now when I try to run PS 64-bit I get "Some of the application components are missing from the Application directory, Please reinstall the application." When I do this, it seems to install correctly until the very end, then it says "Installation Complete With Errors", and when I try to run I get the same 'component missing message'. What can I do? PS 32 bit runs fine. Some of the other applications ib Web Premium say the shortcut has been changed or removed. I appreciate your help...Thank you

Best advice I can think of is to uninstall and run the Clean Script from here.
Adobe - Adobe CS4 Clean Script

"File" and "View" are missing from the ribbon in Excel, MS Office 2011, please help!

"File" and "View" are missing from the ribbon in Excel, I'm running MS Office 2010. Please help!

Post your question on the MS Mac forums as it's their software you're having issues with: http://answers.microsoft.com/en-us/mac?auth=1

Payment details are missing in the file generated by driver program RFFOJP_T

Hello Friends – We send the payment files generated by driver program RFFOJP_T (Payment Medium Japan - Domestic DME (and Bank Charges)). Now, we see issue that couple of payment details are missing in Output file/AL11.
If 20 payment documents are created in F110, only few are shown in AL11/Output file.
Can you pls give me a little idea on how to analyze this issue.
Thanks

Hello Friends - Can you please give me a little idea on what could be the reason for the below issue.
We are using the program RFFOJP_T and when payment file is generated, some of the payment details are missing.
I have executed payment run for 5 payments and only one 1 has come to the file and below 4 are missing.
The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    9770 1400001524
    9770 1400001525
    9770 1400001526
    9770 1400001527
The accompanying payment media have not been generated
>
> Overview of the files generated (DME)
> Name / File name
Thanks

Imported loops are missing in the loop browser

Similar Messages

Maybe you are looking for