Imported mapping in template mapping module still runs against old location

Hello,
I imported the mapping in a new workspace (located in other server) using object names strategy, and I reconfigured the location source (it's a generic one) it uses.
Looking at the mapping Configure menu / Table operators / Location I see the correct location I want to use.
The template mapping module has the only data location Default Agent.
I have synchronized several times with the inbound repository table information, and redeploy the mapping, but it still goes to the old location, that has been unregistered / deleted in the current repository.
I don't know how to make the mapping runs against the location I want to. Please, help me
Thank you

Hi Alexander
After copying a table to a different module, edit the module to set the data location, configure the module to define the location and synchronize the mapping to use this table.
In OMB to synchronize inbound and outbound use OMBSYNCHRONIZE command
Inbound:
OMBSYNCHRONIZE TABLE '$OMB_CURRENT_PROJECT/SALES/TABY' TO MAPPING 'M_W_PARAMS' OPERATOR 'TABY' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
Outbound:
OMBSYNCHRONIZE MAPPING 'M_W_PARAMS' OPERATOR 'TABX' TO TABLE '$OMB_CURRENT_PROJECT/SALES/TABX' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
Cheers
David

Similar Messages

I download songs directly to my iTouch due to a computer crash. I am still running an old iOS system. Just notice yesterday I cannot download albums any longer just songs to my iPod? I go to ITunes store. Open a music file to download and it will give

I download songs directly to my iTouch due to a computercrash. I am still running an old iOS system. Just notice yesterdayI cannot download albums any longer just songs to my iPod? I go to ITunesstore. Open a music file to download and it will give me the opportunityto buy every song but the album and songs that go with the album only. Thebutton is not accessible for an album purchases. Any assistance would behelpful.

No one has had this issue? I go to Itunes store. Open a music file to download and it will gives me the opprotunity to buy every song but the album and songs that go with the album only. HELP

Can I still run my old programs such as photoshop or microsofts products?

can I still run my old programs such as photoshop or microsofts products after having installed Lion over Snow Leopard?

Feiterbiker wrote:
i can still run win'98 porgrams on windows 7 today! cant i?
Actually there are many older programs which will run with Win98 and not Win7.
Same with Lion. There are some earlier programs which will not run -- and anything designed for the PPC CPU is in that category.
Phil

Files that were moved are still displaying in old location.

Hello,
I was recently doing some reorganization of some files in my iCloud account in Finder (In the iCloud tab). When I went to sign into iCloud.com the next day and go to iCloud Drive, for some reason the images that I had moved the day before were still in their old locations. The day before, I also rearranged some folders and made some new ones. Those were updated when I went to iCloud.com, but the images were still there. Here are some screen shots showing what my Finder looks like versus iCloud.com, as of right now. (I do realize that there are some extra apps displayed in iCloud.com, but just ignore those. Notice the images, like the first two listed on the screen)
Notice the extra images on iCloud.com. Anybody know why this is happening? (I tried clearing my cache and cookies, but with no avail)
Thanks in advance for the help!
Alan

Ok,
I solved it. For some reason when I moved the event folder it created a second event folder in iMovie. This second event folder seemed to be overriding, or not allowing the original event folder to be read. So I moved all of the video files out of the original event folder and moved them to the new event folder.
It's currently re-generating thumbnails for all the videos but this seems to have solved the problem.

I just moved and my iPad location is still showing my old location how do I change that?

I just moved and my iPad location is still showing my old location how do I change that?

That's the problem. A WiFi-only iPad uses a database of router locations to determine location. Unfortunately, the mechanics behind this database are a tightly-held secret. Your location may change to the correct one within a week or two or it may take as long as a year! (I'm not kidding.) Incidentally, it will help if you're within range of other routers. Doesn't matter if you pass data through them and also doesn't matter if they're locked. The only requirement is "within range."
By the way, you will find that, if you take your iPad away from your house, it will report your location more accurately.

Firefox says the automatic update is done, but I am still running the old version.

My Firefox is set up to automatically update. When it asks, I say yes, it says it is done, but the new version isn't running. I t has done this many times and I'm still on Version 3.6. How do I get the updates to really work?

You are using the latest version which is Firefox 9.0.1
From your description it sounds as if you still have the old http://www.google.com/firefox Firefox start pages hosted by Google as your homepage. This old default homepage is no longer used as about:home has been in use since Firefox 4.0
Either ignore the message, change homepage to '''about:home''', change it to another page or leave blank.
http://support.mozilla.org/en-US/kb/How+to+set+the+home+page

Page still running on old server after upgrade

I recently upgraded our production server to MX7 from 5.x. I
had previously upgraded the Development server with no issues.
However, I upgraded the production server and shut down 5.x
services. I have a single .cfm page that continues to try to use
5.x??? I've looked at all of my IIs setting and ColdFusion settings
and can't seem to track down the problem. When I shut down 5.x
services it blows up, when I restart them, it works fine. I've
tried renaming the page, moving it, copying and pasting code. No
matter what I do it still tries to use 5.x. I don't see any reason
for this in the code either. Any suggestions?
Thanks in advance!

Try requesting the page using the built-in webserver on port
8500 to rule out a conflict with the web server mapping.
i.e.
http://localhost:8500/problempage.cfm
Please see
this
livedoc for more information on using the built-in web
server.

Location Service Problem! I Moved To A New House, and Used The Same Wifi, But My iPod Touch(4th Gen. iOS 6) Is Still Using My Old Location/Address and Not My New One, How Do I Fix This?

I Moved From New York To Florida, But Kept The Same WiFi/Router, But The Maps App and My iPod Touch(4th Gen. & iOS 6) Is Still Registering My Location In New York.

For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
You can confirm that by going to well-know place with wifi like Starbucks or McDonalds

Moved home folder -- still syncing to old location

So we ran out of space on our server. We're in the process of moving the users' home folders over to the RAID, where there's plenty of room, but for two of us, the two that also use Portable Homes, we've run into a little snag...
When PHD sync runs, it syncs to the old home folder location, not the new one.
Any Ideas?
Thanks in advance,
~Ian

For iMovie to see projects and events on an external drive (that is not the Home folder), they must be in the iMovie Projects and iMovie Events folder at the top level of the external drive. Further, the iMovie Projects folder and the iMovie Events folder must have the extension .localized.
However, if you move them there you risk that the Projects will no longer maintain their links with the Events. The Projects will look for their event clips at the Home folder. You can test this if you like by moving the iMovie Projects and the iMovie Events folders to the top level of the external drive. Then restart iMovie. iMovie should see the projects, but you may see yellow triangles when you open them for edit, which would indicate that iMovie cannot find the event clips at the path it was expecting to find them. (If it does see them, then you are done).
The safest course would be to move the Projects and the Events to the current Home Folder on the internal drive. Make sure they work. Then move them back to the external drive following the instructions in this User Tip.
https://discussions.apple.com/docs/DOC-4141
If there is not room on the internal drive for all the Projects and Events, move one project and associated events at a time.
It sounds like you are well-versed on how to change the Home Folder from the internal to the external drive, and vice versa, but here is a good reference if you need to understand the nuances. You can ignore it if you already know this stuff. http://pondini.org/OSX/SetupOther.html

IStore template mapping import concurrent program

Hi there,
I need to move template mapping from one instance to another. I did export the xml file and I have it. I am struggling to find where should I place this xml from source instance to target instance so that when I run the template mapping import concurrent program, it should pick the XML.
I looked the documentation but can not find default folder to pick up XML for template mapping import concurrent program.
Thanks.

We have multiple apps servers per instance so we might be slightly different than you - this is what worked for me though.
You'll want to install on the Concurrent Manager server for the instance - when you get to the Parameters form of the iStore Template Mapping Import job - you should enter the full path of where you uploaded your .out file - it should look something like this...
/apps*inst*/*inst*comn/admin/out/*INST*serverName/o6504233.out
Hope that helps

Error while running code template mapping between two oracle tables

Hello All
Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Quick help is highly appreciated.

Dera Dallan
its only a target user for the workspace where you are deploying the mapping from.
I have two repositories for two different projects. each repositary has its own workspace.
ex:-
Project 1
Work space bpms_rep_owner
Repositary owner bpms_rep_owner
Repositary user bpms_rep_user
Project 2
Work space dem_rep_owner
Repositary owner dem_rep_owner
Repositary user dem_rep_user
Reg
S.Gyazuddin

Process flow run success but underline mapping sql still running

We have mapping A and B in process flow. We configured Enumerated Condition (success) in mapping A to kick off mapping B after A is success. But the underline SQL in A took long time to finish therefore mapping B starts before data loading is finished in A. We need to finish mapping A loading data first (not submit the job), What could be the best approach for this condition.
Thanks,
frank

Here is the actual scenario. In my process flow I have mapping A and B, both loading data from source to target. I put Enumerated Condition (success) in mapping A so that B start only if A is done. When the job is in completed status in control center, I open job details I notice the mapping A is still running even B is finished. I guess my questions:
1. how to run mappings in order?
2. how do we really know the process flow job is completed?
Thanks for help!

How to get audit id in coder template mapping

Hello everybody,
i am new in this Forum and new to the Oracle Warehouse Builder. I am Student and currently working on a approach of error handling by ETL processes.
To my question:
I am using a Code Template Mapping to load data in my target tables. In my target table i want to have a column which contains the Execution_Audit_Id of the current Code Template run. Can anyone tell me how i get this Audit ID in a Code Template Mapping? That would be great!
OWB Version 11.2
Regards,
Jens

Hi,
You would need to create a parameter in your report called userloginid select the paramter data type to match that of the datatype this value is stored as in the table.
then the correct syntax would be select * from table1 where userloginid=:userloginid
Hope this helps,
Domnic

Check mapping used in BIC module

Hello gurus
we have an EDI scenario. modules are used in the EDI receiver communication channels.
Following is the processing sequence and module configuration of one of the channels :-
Processing sequence:
1    localejbs/Seeburger/solution/sftp         Local Enterprise Bean    solutionid
2    localejbs/CallBicXIRaBean                  Local Enterprise Bean    bic
3    localejbs/ModuleProcessorExitBean    Local Enterprise Bean    exit
Module Configuration:
bic    LogAttID                 ConverterLog
bic    destEncoding          ISO-8859-1
bic    destTargetMsg         MainDocument
bic    mappingName         See_X2E_DESADV_UN_D93A
bic    srcEncoding            ISO-8859-1
bic    srcTargetMsg          MainDocument
exit    JNDIName             deployedAdapters/SeeXISFTP/shareable/SeeXISFTP
Is it possible to get the mapping that is used here i.e See_X2E_DESADV_UN_D93A to view or edit?
I am new to BIC and BIC MD. I went through the documents that are available for mapping designer but i am now even more confused.
The mapping designer can be used to output .xsd file which can be imported into the ESR as external definition and then graphically mapped to the IDoc. Then what is the purpose of this mapping separately and where can i find it??
Appreciate any help coming my way.
Regards,
Xineohpi

Hi Iphoenix
The XSD file should be imported into ESR as an External Definition, so that it can be used as a source/target for graphical message mapping.
As for the BIC mapping, this is deployed as an SCA file into the PI system. This is normally done via JSPM by the Basis team.
Normally, if your partner is using X12 or EDIFACT, you might not need to change anything with BIC mapping. Only in cases where your partner's X12/EDIFACT definition deviates from the international standard, then you might need to adjust the BIC mapping accordingly using BIC MD.
In the case where the standard is used, you just need to double check that Seeburger already provides that XML to EDI conversion mapping, and that it has been deployed by your Basis team (you can check in the Seeburger Workbench to see what has been deployed.) Once the BIC mapping is there, you use that mapping in the BIC module configuration.
To summarize, for an IDoc to standard EDI interface, your main development/configuration effort would be:-
i) Create graphical mapping from IDoc to EDI (XML format)
ii) Configure communication channel to use BIC mapping for X2E conversion.
Rgds
Eng Swee

How to get source table inside Template Mapping code template

Hi guys,
I have the following scenario, I have an table from external database and want to map it to an oracle table. This is done with Template mapping and I selected an Load code template on the execution unit that holds only the external table, this load code template will read row by row from source table and make the inserts into the flow table. I know that oracle use odiRef.getFrom() in order to construct the select statement from the external table. Because i need to do something custom i will need to have a list of the source tables inside the Load code template.
Is this possible?
P.S. I use owb 11gr2.
Regards,
Cipi
Edited by: Iancu Ciprian on Jan 11, 2011 10:58 AM

Hi Suraj,
Thx for your answer!
After posting the message i found in ODI documentation about odiRef other function and this I'm trying now to see if works, will let you know my results ...
I implemented an custom iterator that retrieves the data from an external source and pass it to INSERT commands to execute against flow table. In order that this iterator to work i need the source table name of the current execution unit. Then the iterator is using the that name to get the data from the external entity and retrieve it as an array of Objects, this array of objects will be inserted in the flow table.
Regards,
Cipi

Imported mapping in template mapping module still runs against old location

Similar Messages

Maybe you are looking for