Imported movie is cut short in timeline

I have a mp4 video file that I need to edit. When I import the file into Premiere Pro CS6 the file cuts off about 1 sec before it ends. The mp4 movie file is 15fps with 44.1kHz audio. I created a Custom preset with the same settings. When I drag the movie into the timeline it says the settings are not the same so I select to match movie. The end of the movie is chopped and I can hear the last bit of audio. I can play the movie just fine in Quicktime Player - just not in Premier since it gets cut short. I've tried to drag out the end of the clip in the timeline but it's as if there's nothing else there -- even though I hear and see it in QT Player.
I first noticed this when playing the external mp4 video in a Flash movie with the FLBPlayback component. I thought that perhaps the 15fps rate was the problem as the Flash movie was set to 24fps. I changed the Flash movie to 15fps - published - and still it's cut short.
I can't understand why both Flash and Premiere are cutting the movie short but Quicktime Player is not. Any ideas that might help me figure out what's going on?? Thanks.

I made a typo in my op. I meant to say "The end of the movie is chopped and I can't hear the last bit of audio."

Similar Messages

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250?

Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250 via USB 2.0? How? (page in handbook?)
Further specifications of this older camera:
USB 2.0
DVD-RAM (cannot be inserted in my MBP!)
50-PAL (signal)
MPEG2
Dolby Digital
I want to use FCE if possible but maybe could try to install the software of this camera on Windows virtual XP also on my MBP?

I forward an answer of Panasonic (written in German):
So Panasonic does not offer a software which is compatible with Apple!
Bezug nehmend auf Ihre Anfrage teilen wir Ihnen mit, dass der Camcorder
VDR-D250 die Videoaufnahmen nach dem DVD-Videostandard sowie nach dem
DVD-VR-Standard aufnehmen kann. Wir können jedoch nicht beurteilen ob Ihre
Software Final Cut Express 4.0.1 die Bearbeitung dieser Standards
unterstützt. Seitens Panasonic wird weder eine Apple kompatible software
noch Support für Apple Geräte angeboten. Wenden Sie sich diesbezüglich
bitte an Ihren Apple Händler oder Ihren Computeradministrator. Die
mitgelieferte Software des Camcorders ist ausschließlich für folgende
Betriebssysteme vorgesehen:
- Microsoft Windows 2000 Professional
- Microsoft Windows XP Home Edition
- Microsoft Windows XP Professional
Ob diese Software in einer virtuellen Umgebung genutzt werden kann ist uns
nicht bekannt. Um die mit dem Camcorder aufgenommenen DVDs an einem
Computer-Laufwerk auslesen zu können müssen diese vorab mit dem Camcorder
finalisiert werden. Ausnahme ist die Verwendung einer DVD-RAM.

IMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.

iMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.
Any ideas?

You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
most common cause of your not finding them is bad sort - view menu ==> sort events
Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
YOu can alwasy find the event a Photo is in by selecting it and selecting show event
LN

How to import Illustrator CS5 personalized short cuts to Illustrator CC?

Does someone knows how to import Illustrator CS5 personalized short cuts to latest Illustrator CC?
Thx.

Thanks for the help.
I actually tried something like that: I copied the .kys file from CS5 into the the shortcut file on Ill. CC, then when I select it in my Shortcut menu in illustrator, it doesn't work still?
Is this what you mean? or you have another option?
Thx.

How to Encoding MPEG Movie to be able to import into Final Cut Express

I have MPEG Movie video clips that were sent to me. Title dvdMovie1chapter26.mpg (21.6MB) given to me from a PC taken on dvd video camera and compiled on CD disk. I would like to edit in Final Cut Express 4.0. I can not import in present form. Have used HandBrake and Toast 8 to encode. Divx and AVI to grainy. Have tried to make QuickTime Movie but 21.6 MB file went to 115.6 GB. Not sure how to set QuickTime options (Formats-Audio-Video Setting) in Toast 8 to encode with good quality this file so I can import into Final Cut Express. I will not have enough disk space to do all the video clips at 110 GBs or more per file. When I drag this file into Toast 8 with DVD-Video selected the file come into Toast as a Video-MPEG-2 720x480 29.97fps and Audio- Dolby Digital, Stereo 48000Hz File. Any Ideas?

How long is the movie? DV is 3.6MB/second. Handbrake is no good for this. I don't know if Toast will do it, but you can try MPEG Streamclip. You want to export to QuickTime using the DV NTSC codec at frame size of 720x480 and 29.97fps.

Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Absolutely. Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion). Make sure you check the Self-Contained box. The export will be an exact copy of your Sequence, complete with any filters or other effects you've added. Import the self-contained movie back into the project (or another project) if needed.
-DH

Audio popping between clips with timeline imported from final cut xml file

So i imported a final cut timeline that was synced with pluraleyes into adobe and between all the cuts there is an audible popping noise. I've tried using audio cross fade but it seems to make it worse. How can I fix this??

If anyone else has this problem - you fix it by making sure you pan the audio to the center, not left or right.

Importing movies to timeline

how do you get movies to be on the timeline, so when your SWF
file starts you don't have to click play on the movie, it just
automatically plays.

you can either:
1. place them on the main timeline in the authoring
environment
2. load externals swfs using loadMovie,loadMovieNum or
loadClip
3 use attachMovie() to instantiate a library
movieclip.

How do I stop Flash timeline and play imported movie?

I have a Flash movie that has a button in it to start a movie
clip that I imported that was created in After Effects. I want this
movie to play if a user clicks on the link that appears art-way
through the intro flash movie. If I stop the Flash movie, the
button won't start the imported movie. If I leave it, the imported
movie does play, but it covers the intro. Here are my two versions
http://www.sociusdesign.com/flash/TestMovieGone.html
and
http://www.sociusdesign.com/flash/TestPhotosGone.html
I also uploaded the SWF files to that same directory.
What am I missing?

How exactly does it "demand to reinstall"? I have exactly the same system as you, and I have never observed anything like that.
What files do you have in C:\Windows\system32\Macromed\Flash ?
What is the contents of the mms.cfg file in C:\Windows\syswow64\Macromed\Flash ?

MP4 (MPEG-4 MOVIE) FILE IMPORT TO FINAL CUT PRO X

I have some MP4 files I am unable to import into Final Cut Pro X from a Hard Drive. 1920x1080, Codecs: MPEG-4 Video, Linear PCM, Audio Channels: 2 Total Bit Rate: 35,253 ...
Any suggestions as to what steps I need to take to be able to import them into Final Cut Pro X ???

Okay, I fugured it out ... the footage I was provided was from a Sony XDCAM source ... the link below gave the information needed ...
Final Cut Pro X: Importing Sony XDCAM media http://support.apple.com/kb/HT4724
Just follow the instructions ... the sony documentation for the two downloads indicated that this would not work for FCP X ... but it did work fine ...

Why are my movie clips cut off when imported?

I am importing movie clips from my flip camera and only half the clip is being imported. HELP!!!

Are the episodes being shortened when you publish to a local folder and launch them in the browser as well as when published to the server? See this page under "Troubleshooting"...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
If the local files are OK it would suggest the problem is on the server. Otherwise you need to troubleshoot iWeb.
If the problem is files that are too large, you can reduce the sampling rate and/or convert to mono if the content is mostly speech rather than music.

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Can't import movies to iTunes after setting up iTunes Match

Hi. I setup iTunes Match a couple of weeks ago (love it, btw), but for some reason since I set it up I can no longer import .m4v files into the Movies library. There is no error, they just never copy over.
iTunes 10.6.1(7) 64-bit on MacPro running OS X 10.7.3
Any ideas? Maybe its a strange coincidence, but I noticed the problem shortly after setting up Match.

Also, iTunes match gets stuck sometimes so you have to log out of match and log back in before your imported movies show up in your iTunes library.

IMovie 8.0.6 will no longer import .mov or .dv files

Trying to troubleshoot my wife's iMovie (2008 MacBook, OS 10.5.8) issues:
-no longer imports .mov or .dv files (worked up until a week ago or so)
-in testing, my MacBook Pro (OS 10.6.3) imports said files without issues
-we've deleted apple.com.iMovie08.plist file from MB, no change
Import process looks on MB like it is going to work, but import 'barometer' shows only briefly before disappearing, with no import resulting. Troubleshooting is made more frustrating given that this worked previously on this machine. Perhaps a system update or something similar is the cause?
Any help welcome...
Cheers,
Andrew

forgot to mention above that MB in question will import short .m4v files without drama. Files we are attempting to import as .dv or .mov files are about 20Gb.
cheers,
A

Imported movie is cut short in timeline

Similar Messages

Maybe you are looking for