Imported objects not visible

Hi,
We have to import some namespaces from one XI server to another.
when i try importing into the target server i get information that the import was successful but i cannot see the imported objects.
When i use the <b>find transports</b> option to view the objects that were imported im am able to see all my design objects.
The cache notifications also indicate that the transport was successful.
Am i missing out on something? What could be the possible reason for this behavior?
One more thing clarification i want, is regarding exporting namespaces.
is it possible to export individual namespaces?
Im posting this question because even when i chose to export individual namespaces rather than the SWCV itself , still we got the entire SWCV and not the individual namespace.
Please give your inputs regarding this.

siva,
Im posting this question because even when i chose to export individual namespaces rather than the SWCV itself , still we got the entire SWCV and not the individual namespace.
>> this happends that one disavt we have even though you transport namespace you get allswcv.
We have to import some namespaces from one XI server to another.
when i try importing into the target server i get information that the import was successful but i cannot see the imported objects.
When i use the find transports option to view the objects that were imported im am able to see all my design objects.
>> youneedimport corresponding swcv and then the namespaces.
Regards
sreeram.g.reddy

Similar Messages

  • Indesign transparency multiply pdf/x-1a pdf/x-4 export pdf object not visible

    Hello,
    I've created a simple Indesign cs4 document under osx demonstrating the problem. I've copied from an Indesign document a rectangle with a fill color 100% cyan and a transparency effect multiply and paste the object within a new created document. I've paste the same rectangle again and switched off the transparency effect. Then I've create a new rectangle again with the same fill color and multiply transparency effect.
    When I create a pdf with the standard pdf/x-4 settings the copied rectangle with the multiply transparency effect has disappeared, while the other 2 rectangles are visible. Creating a pdf with the standard pdf/x-1 settings in Indesign, then all 3 rectangles are visible.
    I've created a zip file named Indesign.zip with the following 3 elements:
    - multiply.indd - indesign document
    - pdfx1.pdf - export pdf with pdf/x1 settings (3 rectangles are visible)
    - pdfx4.pdf - export pdf with pdf/x4 settings (only 2 rectangles are visible)
    Opening the document with CS5 and creating pdf files, we obtain the same strange result.
    You can download the zip file from the following link:
    http://www.symeta.be/symeta/static/files/Indesign.zip
    How do we explain this peculiar problem?
    Regards,

    Peter, John,
    If there is no solution finding corrupt objects before going to production (creating pdf files), then the problem is only detected when the job is printed! More important, if the corrupt object is located in an advertisement, then you customer wouldn't pay.
    To further investigate the problem I've create 2 snippets with the following names:
    - Snippet_Good_PDFx4_Result.idms (snippet of the object who's visible after conversion to pdf/x-4)
    - Snippet_Wrong_PDFx4_Result.idms (snippet of the object who's not visible after conversion to pdf/x-4)
    You can download these snippets from the following link.
    http://www.symeta.be/symeta/static/files/Snippets.zip
    When I replace the following 4 lines from the bad snippet:
                                <PathPointType Anchor="0.21122640285165062 35298.673065771356" LeftDirection="0.21122640285165062 35298.673065771356" RightDirection="0.21122640285165062 35298.673065771356"/>
                                <PathPointType Anchor="0.21122640285165062 35440.40534923592" LeftDirection="0.21122640285165062 35440.40534923592" RightDirection="0.21122640285165062 35440.40534923592"/>
                                <PathPointType Anchor="141.94350986741858 35440.40534923592" LeftDirection="141.94350986741858 35440.40534923592" RightDirection="141.94350986741858 35440.40534923592"/>
                                <PathPointType Anchor="141.94350986741858 35298.673065771356" LeftDirection="141.94350986741858 35298.673065771356" RightDirection="141.94350986741858 35298.673065771356"/>
    With the following 4 lines from the good snippet:
                                <PathPointType Anchor="154.96062992125985 161.1023622054882" LeftDirection="154.96062992125985 161.1023622054882" RightDirection="154.96062992125985 161.1023622054882"/>
                                <PathPointType Anchor="154.96062992125985 302.8346456700551" LeftDirection="154.96062992125985 302.8346456700551" RightDirection="154.96062992125985 302.8346456700551"/>
                                <PathPointType Anchor="296.6929133858268 302.8346456700551" LeftDirection="296.6929133858268 302.8346456700551" RightDirection="296.6929133858268 302.8346456700551"/>
                                <PathPointType Anchor="296.6929133858268 161.1023622054882" LeftDirection="296.6929133858268 161.1023622054882" RightDirection="296.6929133858268 161.1023622054882"/>
    Then the result is ok!
    The bad one has very strange coordinate values, such as 35298.673065771356 which is about 12452 mm! When placing the bad snippet in a new Indesign document the result is ok, just after converting to pdfx/4 the object isn't visible anymore!
    Who can justify this strange behaviour?
    Regards?

  • Graph which should display the data of a view object not visible

    Hi,
    I have a main page which contains a <af:panelAccordion> component with three <af:showDetailItem> components. Each of these <af:showDetailItem> components contain a page fragment. In each of these page fragments are a <af:table>, <dvt:pieGraph>, <dvt:lineGraph> and a <dvt:areaGraph> which represent data of view objects.
    In the first <af:showDetailItem> window all components are visible. But when I click on another <af:showDetailItem> all components are visible except the <dvt:areaGraph>. Weird is when I insert a <af:commandLink> into the page fragment without any functions. Also the link doesn't invoke any mehtod and partial submit is set to false. Now when I click on this link the <dvt:areaGraph> with its data become visible and show the data.
    The area graph and the line graph have partial triggers set to the table. Because when another row in the table is selected, the area and line graph should show data which is dependent on the selected row of the table.
    Has anybody an idea?
    Thanks in advance!
    Edited by: user13061309 on 27.07.2010 06:53

    Hi Frank,
    thanks for your response.
    I created a fragment-based flow and dragged it onto the main page as a region component. The main page contains the panelAccordian with its showDetailItem's. Each of the showDetailItem components of the panelAccordian contain such a region component.
    Now I set the partial trigger's property of the region component pointing to the showDetailItem component which contains the region but nothing changed. The graph is still not visible at the first click on the detailItem. I also set the trigger's property of the region component pointing to the panelAccordian but also nothing happens.
    Regards
    Michael
    Edited by: user13061309 on 06.08.2010 03:00

  • New objects not visible in report objectpicker

    Hi, I'm new to SCOM so please forgive me if I say something wrong.
    We are using SCOM 2007 R2.
    In Operations Console I've created 2 new Web Applications in Authoring view.
    In Reporting view I open  Availability report from Microsoft Generic Report Library
    Click Add Object
    Search for Web Application I've created and get nothing
    For some reason I see only old objects when search or view all available in report. I tried to use old Management Package and created my own (I thought the problem was in sealed MP, but my new is unsealed). Found similar problem in "Missing Objects
    in Report Objectpicke" question,  but we have less than 100 monitoring agents.
    So I have no idea why objects are not visible, could you please help?

    Verify from Group {contain all computers that you want} that using in Reporting.
    You also check below link, it's similar issue
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/5cb0fb12-73c5-4553-987f-ea415babd876/missing-objects-in-report-objectpicker?forum=operationsmanagerreporting
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Imported Archive not visible

    Hi Guru,
    I have imported into XI a XSLT Mapping in IMPORTED ARCHIVE; now I have to use thi mapping in my Interface Mapping, but the imported Archive (the XSLT Mapping...) is not visible! How is it possible?
    Thanks to all!

    hi,
    1. Make sure that the XSLT program .zip or jar format.
    2. If the mapping program it' not showing then forceble you need to push your interface mapping.
      If the mapping program it is not showing mean particular source message particular target message couldn't defind the mapping program..this is not complesary any mapping program we can push through forceble .
    Regards,
    Venu.

  • Custom attributes added to user objects not visible in OWA address book

    Hi,
    I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL  The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
    in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
    Thanks!

    Hi Abu,
    Please see following link:
    Customize Details Templates
    http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
    It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
    My understanding is this setting only visible in Outlook.
    Please correct me if there is any misunderstanding.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Ole object not visible on oracle report

    Hi,
    I have an oracle report built in oracle report 6i builder I have used a Boilerplate OLE Object(image.bmp) in the report but when I am executing the report on Oracle E Business(Application) then that OLE object is not visible on the report output(output is in the pdf format).
    Please help me out with this
    Thanks in advance

    If you want to display an image on your report, use Link File as item type in the Layout Editor.
    Note that the image has to be accessable from the Reports Server.

  • Eclipse - imported type not visible !?

    I have an import at the beginning of my code but it is underlined and when you hover over it it says imported type ... is not visible. Why? I have added the jar and all other imports work fine. What could be wrong?

    Another thing to look for is to make sure that the class you are looking for is in the Jar file, and not a different one. Like how the JavaMail api has multiple jar files.
    Something you could try is to remove the import, but keep the part of the code where you use the classes from that import, and save the file. When you get an error, right click on the error and select "Quick Fix", and see if it offers the class as an option to add.

  • Why are imported images not visible any more in My Catalogue?

    I am trying to find out if there are limitations in PSE's Organizer that make it pointless for people with large numbers of photos to bother buying PSE 12.
    I imported 1050 JPEGs into My Catalog without problem using PSE 8 but all subsequent imported JPEGs show up as Thumbnails that are Opague with an Hourglass design on them. This makes organizing these images impossibly slow.  When I created a new catalog -- good advice from "andalebbfatima.1" --imported thumbnails were visible again.
    But what to do about the 1050 images in the original catalog? I've got two thick "how-to" books and they say nothing about copying images from one catalog to another.
    More important, to have confidence to buy PSE 12, I need to know what caused the 'invisible' thumbnails in the original catalog and is it something that could happen again after another two years of scanning, importing and trying to organize?

    Glad you got it working.
    For creating multiple catalogs from this original one, you can create copies of the original catalog. Check your catalog location using Help > System Info in Elements Organizer.
    Now copy paste the catalog folder (i.e. the folder having same name as your catalog) in the same location. So now, you have say folders say- MyCatalog and MyCatalog-Copy.
    You may open MyCatalog-Copy from Elements Organizer using File > Manage Catalog. Once this open, you can remove images from it so that only a selected set of images can be organized in this catalog. Now images get deleted from the hard disk in this process. Likewise, you can organize the original catalog.
    Hope this helps.
    Thanks
    Andaleeb

  • Integration Repository Objects not visible after Succesfully Import

    Hello everybody,
    I'm importing design objects via File System, the system gives a succesful message after import, but the objects are not imported, I've checked Cache and everything is green, anyone have any suggestions on why could this be happening, we have PI 7.0 SP 17, thanks in advance for your answers.
    Regards,
    Julio Cesar

    Hello guys, thanks for your answers, actually is the correct .tpz file, and we are exporting a hole namespace, the software component version already exists in the target system, the objects are active in the source system, actually there is no change list with inactive objects in any of the systems the source or the target.
    Regards,
    Julio

  • Objects not visible in Map Viewer Display Data with Mouse Moveover

    Hi All,
    On version 11.1.1.5.2 OBIEE with Map Viewer a customer has the following problem. Data objects are not displayed as expected on the map when the visibility check box is disabled on a dashboard. However the data about the object is incorrectly displayed on the map when the mouse is placed over the location of the hidden object.
    The customer's screen shots show a map with a panel which has a list of assets with a check box controlling if the asset is displayed. When the check box is off then the asset image is correctly not displayed but when the mouse is placed over the hidden asset’s location then incorrectly a pop window shows the hidden asset's Tooltip data.
    I was unable to reproduce this in-house with an OBIEE dashboard connected to Google Maps.
    In the MapViewer User Guide there is a reference to a MapViewer JavaBean method “setSVGShowInfo” which appears to be related to this:
    http://docs.oracle.com/cd/E14571_01/web.1111/e10145/vis_beanapi.htm#i1023460
    What approach should be taken to troubleshoot the problem?
    Aidan
    Edited by: user817045 on 21-Feb-2013 02:08
    Edited by: user817045 on 21-Feb-2013 02:32

    This is likely a bug.
    Is there an SR filed on this?
    Anyway, the Mapviewer javascript API is being used in OBIEE (not the java bean one).
    Is it a standard obiee map view which has this issue?
    Try the OBIEE Sample App (available on OTN)
    Try Dashboard page 3.3. SF Metrics. There are two layers that can be shown on the map (Revenue and Billed Quantity, and Establishment Revenue).
    Enable both and on hover the Rev & Billed qty info is shown. Uncheck Rev & Billed Qty and only the info for Establishment Revenue is shown on hover or when clicked on.

  • Web Object not visible in published project

    I'd like to use the new web object interaction widget in Captivate 7 to embed a website into a project. Everything works fine as long as I  only preview the project in my web browser. But when I publish it and go to the slide where the web object is supposed to be, there's only a blank space. Why?
    I've published the project in SWF-Format with  eLearning-output set to "AdobeConnect". I tried to switch the option "Scalable HTML content" on and off as I heared that some people are having problems using this in connection with widgets, but no matter whether it's turned on or of, the web object doesn't show up. There must be something very
    trivial that I have overlooked since I'm using the web object in the standard way it is meant to be used.
    Thanks in advance for any help.
    Andreas

    Thanks for your advice, but it still doesn't work. I have created a new project for my tests with only the web object in it to make sure no other objects etc. are influencing the output. I  published the project and tried to run it on different browsers/operating systems and directly from my hard drive vs. Adobe Connect. The results:
    Using my Mac and opening the project with the HTM.-file from my hard drive after I have added the published files folder  to the trusted locations for Flash (without this setting, it doesn't work), the web object only appears in Safari, but not in Chrome and Firefox. Using AdobeConnect, it's the same: only Safari.
    Using a Windows laptop (again opening the project with the HTM.-file from my hard drive after I have added the published files folder  to the trusted locations for Flash), it works with Internet Explorer and Firefox, but not with Chrome. Using AdobeConnect, no browser works. I only get this message:
    I can't use the web object when it only loads under very special circumstances. Moreover, I found out, that checking the "Scale HTML content" checkbox in the publish window  results in a totally misplaced web widget in those browsers that support the web object. It then looks like this:
    I use this option regularly, so this is really a problem for me.
    I hope you can tell, what I can do to get the web object running. I simply can't believe that this  is the standard behaviour and that everybody else is experiencing the same problems. There must be something I can do to get it running.
    I hope you can help.
    Best Regards
    Andreas

  • [SOLVED] New attributes in View Object not visible in pageDef

    Hi,
    I'm having a View Object whererin I create new attributes. The problem is that the newly created attributes are not available for selection in a table binding in the page definition.
    It seems like there is still somewhere a reference to the 'old' collection of attributes of the View Object. Is there a way to force an update?
    The .xml file of the View seems to have the correct query containing the new attributes. Altough, when I try to edit the table binding in the pageDefinition, the attributes are not available in the 'Available Attributes' frame.
    Thanks,
    Koen Verhulst
    edit: solved
    Edited by: Koen Verhulst on Mar 5, 2009 8:47 AM

    Hi Chetan,
    I am now able to add a new tab after adding a new entry with the Main View name in "Assign Access levels to Incident Tabs" in transaction SPRO.
    However, I am now facing a new issue when I add a main view in OIF component. There are 12 main views in the Object Instance Schema with ID's MainView<sequencenumber> as shown below.
    But when I add a new main view I am getting the ID with the format MainVIew<sequencenumber_hexadecimalvalues> and also I am able to edit the ID value which is not enabled for other main views as shown below.
    The problem with this hexadecimal value is that every time a change is done and I save the configuration, the number changes and this is causing problem as the configuration in SPRO does not match and the new tab becomes invisible.
    Please could you let me know what could be the reason and how to rectify this?
    Regards,
    Poojith M V

  • Context object not visible in the Expression Editor

    Hi ,
        I have created a context object and assigned it to the sender interface ( outbound interface) but i couldn't see the created object in the Expression editor.
    Can anyone tell me why it is like this? It shows only the technical context objects .
    with Regards
    VasS

    Hi Vasagam,
    Please try out the following and see if it works:
    - Did you set the "Adapter-Specific Message Properties" in the Sender File Communication Channel.You have to select this check box and also select the "File Name" check box(this will be visible once the initially mentioned check box is selected)
    - Is the interface to which the context object is assigned an outbound Interface(Sender Interface) in receiver determination? Only then the context object will be visible.
    Regards,
    abhy

  • Inline Objects Not Visible

    This is my first time in this discussin. I usually work with Final Cut and DVD Studio Pro.
    I have a document with floating TIFF pictures. When I change them to inline, they dissapear. they are there, but I cannot see the picture. It looks like nothing is there. If I select the picture, the outline is visible, but I cannot see what picture it is.
    There must be a setting somewhere to change that, but I cannot find it.
    Thanks for you help!
    Mike

    I might be experiencing the same problem. If you push the scroll bar right to the top do the objects reappear. I've noticed that if I scroll then all floating objects don't display ? anyone else ?
    This is on a 20" iMac, it works fine on my macbook pro ?
    Message was edited by: mcornes

Maybe you are looking for