Imported Objects Option Not available Under SWCV ?

Hi Experts,
I need to Import Idoc from R/3 system.
But I am Unable to See Imported Objects Option Under SWCV.
How Can I Import Idoc in PI 7.0
if any screen shots are available
please share it
It helps me So much.
Thanks and Regards,
Ravi

Hi,
refer the below link.
http://****************/Tutorials/XI/FileToIDoc/Index.htm
Importing IDocs and RFCs
http://help.sap.com/saphelp_nwpi71/helpdata/EN/2b/a48f3c685bc358e10000000a11405a/content.htm
Regards
Srinivas

Similar Messages

  • C3-00 WLAN option not available under connectivity...

    Hello, newbie here. i just  bought a C3-00 for my son to use. The only reason i purchased it is becasue it is supposed to have wifi, and it was $50 more than the phone i was going to get which does not have wifi, so i hope the extra money has not been wasted.
    The software version on  the phone is v3.65 26-01-11, RM-614.
    under connectivity there is no WLAN option.
    there is bluetooth, packet data, and usb data cable, but no WLAN option.
    the manual does not mention WLAN, but if i search online i see lots of people talking about using wifi.
    i thought it was because i was back  level, so i downloaded nokia software updater, and connected the phone to my laptop.
    it tells me that  3.65 is the latest software version even though the nokia support page says it's at 8.7.
    so i'm stuck.
    i can't update the software, and i don't have the WLAN option.
    can anybody help before i send the phone back??

    same problem.. I've just bought my C3-00 and I can use my home wlan connection but at university there is a wpa2 enterprise wifi network... I can see the network but I can't save/connect in it.
    People with other nokia models can connect in an easy way, how can I connect? I need another phone or I have just to change some hidden options?

  • HT4623 The software update option is not available under my general tab...now what

    The software update option is not available under my general tab...now what

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • Browse in Mini Bridge is not Available under File Menu in Photoshop CC

    Recently installed Bridge CC and Photoshop CC in Windows 7 enviornment. "Browse in Mini Bridge" option is not available under the File menu. I reinstalled Bridge CC, rebooted, yatta yatta, but no Mini Bridge option. Any ideas how to get it to install/come up?
    Thanks!
    Kent

    Mini Bridge is no longer available, so it's never going to show up again. All Flash-based extension panels were removed from Photoshop, and Mini Bridge was one of them. More info here:
    Photoshop: Spring Cleaning | Mini Bridge

  • Preview on [device name] option not available

    Preview on [device name] option not available on Folio Overlays

    In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
    Are you using InDesign CS5.5 or InDesign CS6?
    You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
    Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
    Uwe

  • Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

    Hi everyone,
    I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
    Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
    What does this mean?
    Regards
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified       

    Any idea?
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

  • Canon MP510 scanner not available under 10.9, who can help?

    Canon MP510 scanner not available under 10.9 since update, who can help?
    Canon informed me that Apple does not support this device any more, apple informed to contact the manufacturer.....
    Any ideas how to activate scan function again?
    Printing is okay under 10.9 and under 10.8 scan+print was okay.

    Canon has a scanner driver and the MP Navigator scanning application for the MP510 for OS X 10.8 so you could try installing them on your 10.9 Mac. I am not sure if either file is digitally signed, so Gatekeeper will block the installation. To install them, you can Control-click on the respective installer and select Open from the pop-up menu. You will then be given the option to install.
    And for the record, Canon makes the drivers - not Apple, so it is Canon that is not supporting the MP510 on OS X 10.9.

  • HT204053 iCloud option not available on MacBook Air

    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

    r_lopez wrote:
    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
    iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
    Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
    I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

  • Photoshop cc 2014 / Bridge cc (automated tasks not available under "Tools" menu)

    I Have downloaded the new Photoshop CC 2014 and updated Bridge. I am no longer able to run automated tasks from Bridge in Photoshop because the "photoshop" submenu is not available under tools...

    You will likely get better program help in a program forum... Bridge or Photoshop or both
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

    When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
    I didn't notified any errors while registering our counter objects or while running Perfmon.exe
    Note: Same counter objects are available and working fine with Windows Server 2008 R2.
    for diagnostic our counters on WIN2012, ran command as follows:
     cd c:\windows\sysWOW64
     lodctr /Q
    I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
    Appreciate quiclk response with solution or clues to diagnose it more details.
    Thanks & Regards,
    Sudhakar Rudra

    Hi,
    Thanks for your reply.
    I hope you understood our problem.
    same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
    I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
    and
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
    Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
    I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
    I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
    Do you see any issues of registry entries. ?
    On what basis perfomance monitor list few enabled counters?
    How can we add our counters manually to perfomance monitor?

  • Error - Some objects are not available to your user profile...

    Hello,
    It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
    Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
    If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
    The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
    Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
    Regards,
    SS

    Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
    Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

  • I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

    I have the latest version of photoshop cc. Why is the focus selection option not available ?

    Use CC 2014 menu Help>System Info... use its copy option and paste the info here.  So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

  • WLAN override option not available for WLC 4402 - 6.0.196.

    Hi All,
    Its kind of weird BUT it seems that the option for WLAN override is missing.u.
    I could find it on the lower version BUT not on the 6.0.196.
    Please help.
    Does this mean I could only set it up via the WCS and not the WLC directly.
    Thank you.
    Warmest Regards,
    Azzafir Ariff Patel.

    Hi Scott,
    Thank you so much for the clarification.
    Thanks again.
    Quoting fella5 :
    azzafir,
    >
    A new message was posted in the Discussion thread "WLAN override
    option not available for WLC 4402 - 6.0.196.":
    >
    https://supportforums.cisco.com/message/3042635#3042635
    >
    Author : Scott Fella
    Email : [email protected]
    Profile : https://supportforums.cisco.com/people/fella5
    >
    Message:

  • Option not available to add skype to go number in ...

     Option not available to add skype to go number in canada.... Urgent its been 1 week

    venkatesh wrote:
     Option not available to add skype to go number in canada.... Urgent its been 1 week
    Skype To Go numbers are available in the following countries:
    Australia
    Canada
    Chile
    Denmark
    Estonia
    Finland
    Greece
    Hungary
    Ireland
    Latvia
    Lithuania
    Luxembourg
    Mexico
    New Zealand
    Poland
    Portugal
    Romania
    Slovenia
    Singapore
    South Africa
    Sweden
    United Kingdom
    USA
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Object option not installed

    Dear Sir
    I have some error can you help me. I am appearing for form 6i exam
    1z0-132. Here are the details.
    Operating system ` window 98 First edition
    Oracle product information
    Personal Oracle8 Release 8.0.3.0.0 - Production
    With the Partitioning option
    PL/SQL Release 8.0.3.0.0 - Production
    Error information
    ORA-21300     objects option not installed
    ORA-21300     objects option not installed
    Cause:     The objects option was not installed at this site. Object types and other object features were, therefore, unavailable.
    Action:     Install the objects option. The objects option is not part of the Oracle Server product and must be purchased separately. Contact an Oracle sales representative if the objects option needs to be purchased.
    Note I am using it with form 6i
    Email [email protected]
    thanks in advace,since i have downloaded the product i dont have the code and oracle will not supply me with support
    salim

    Personal Oracle 8.0 didn't include the Object option, that only came with the enterprise edition of the datbase back then.

Maybe you are looking for