Imported RAW files corrupted but JPEG ok. Will this be ok in my library?

One of three of my SD cards imported about 10% of its RAW files with great chunks missing. I actually saved the folder onto external hard drive before trying to import with LR, and I CAN see quite normal RAW file images using iPhoto, but the same images are still fragmented when I import them directly from the external hard drive. 
EXcuse use my ignorance, but can I import the jpeg images using Lightroom's DNG copy option (so that they are more stable); and will I be able to use them, and work on them, just as effectively as with all the successfully downloaded RAW images?
OR do I have to go back to Iceland for these 100 photos?!
Thanks, Sandoise

Sandoise wrote:
looking at images on the camera screen
That does not verify raw data, only embedded jpeg preview, which you already know is OK.
Sandoise wrote:
I can see both RAW and JPEGS in iPhotos and they look perfectly good.
Well, seeing them in iPhotos does not mean raw data is good - it may also be showing just the embedded jpeg preview, which doesn't count.
Sandoise wrote:
Lightroom is the third way I've checked
Lightroom is for sure showing the raw (re-rendered) data, so it's the one to use to judge raw data integrity, as read by OS, from card, through your reader...
Sandoise wrote:
How else can I check the card?
It's "impossible" to tell whether problem is card or reader, unless you try a few different readers. Try a few different ports and a couple different systems too if you can, to rule out system/port/reader possibilities. If raw data is bad no matter which system, which port, which reader you use - it's bad on the card. You still won't know for sure whether the card is bad or the camera is bad, or something else happened.., but bad card is the most likely..

Similar Messages

  • Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

    Anyone have a clue how I can open or convert the Adobe Connect FLV file?

    I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
    The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

  • Import "RAW files only" also imports JPEGS (+ steps to reproduce)

    I filed this bug report to Apple:
    Summary:
    When importing "RAW files only" the accompanying JPEGs are also imported when the files are stacked (cmd-K) in the import screen.
    Steps to reproduce:
    1. Create a new library
    2. Insert a card from a camera (checked with Canon G9, Lumix DMC-LX3) which holds RAW files and their accompanying JPEG files (same filename, different extension)
    3. Cmd-I to import, if the import screen does not open by itself.
    4. Make sure "RAW files only" is selected
    5. Select "Uncheck All"
    6. Select a few RAW files (for example 4) (click first, shift-click last, click checkbox, all 4 are selected at once)
    7. Cmd-K to put them in a stack.
    Above the "Import Checked" button the number of files to be imported is shown, 4 in this case.
    8. Click "Import Checked"
    Wherever the images are imported, not only the 4 RAW files will be imported, but also the accompanying JPEG files. This is also the case when only JPEGs are requested, in that case the RAW files will be imported as well.
    Is is essential that the images to be imported are stacked in the import screen. If this is omitted, only the requested files (either RAW of JPEG) are imported (4 in this example).
    Koen

    Hi again
    Sorry the delay in getting back to my post but I've been a tad busy.
    Well, after a bit of testing I can confirm that the problem does seem to be an issue with Vista (32bit and 34 bit) as Jeff states.
    I tried importing the raw files into Vista 32-bit, Vista 64-bit and XP 32-bit and whilst all operating systems allowed the import of JPEG files, I was only able to import the raw files into XP.
    I havent got a card reader so am unable to test this at the moment.
    Stephen

  • Trying to import RAW files but receiving "some import operation were not performed" error message.

    Trying to import RAW files (from Canon 5D Mark III) but I'm receiving the following error message "some import operations were not performed". I am trying to copy to my Seagate backup drive, however the only destination it will let me copy to is my Lexar flash drive (where I don't want to store them!).  I've checked all the file permissions--everything says "read and write". Not sure where to start   I recently switched to an iMac where the problems started (never any issues importing into Lightroom on my PC--just slowness). Please help! 

    NIKON D3300
    The Nikon D3300 Raw format is not yet supported in Lightroom 5 (currently 5.3).
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Raw file formats are proprietary to each camera manufacturer and specific to each camera model. Adobe's Camera Raw engine (used by both Adobe Camera Raw - as a plugin to Photoshop - and Lightroom) must be constantly updated with every new camera make and model which arrives on the market in order to read and edit Raw files from that camera.
    Adobe has added support for the D3300 to Camera Raw 8.4 which is about to be released. It is a Release Candidate (RC status) at the moment. So D3300 Raw support will probably be added to the next soon-to-be-released Lightroom update (5.4).
    http://labs.adobe.com/technologies/cameraraw8-4-cc/?tabID=details#tabTop
    In the meantime, you can download the free Adobe DNG Converter 8.4
    http://labs.adobe.com/downloads/cameraraw8-4.html
    Using the DNG converter, you can then convert the D3300 Raw files to DNGs then open and edit the DNGs in Lightroom 5.3.
    Once Lightroom 5.4 is released (assuming it also has D3300 support) the DNG conversion will no longer be required.

  • Iphoto 8 after update won't import RAW files

    I'm running iphoto 8 version 7.1.3 and just updated the software from Apple's auto update (Jun 30th is when the update installed). Now I can't import RAW files from my canon 30D, from a memory card or from existing files. Every time I try iphoto freezes and I have to reboot the computer. Add to that, iphoto has now "lost" most of the pictures - ie it doesn't show them in the events or photos areas. I have managed to find the photos in the library, but when I try to import them back into iphoto, if there are any RAW files in the folders, I get the same problem as before - iphoto freezing, and having to restart the computer.
    has anyone else experienced this problem? Or have any suggestions for solutions?
    thanks

    Welcome to the Apple Discussions. Are you shooting RAW + jpeg or just RAW. If it the former another user found out that shooting the combination of formats was not supported by iPhoto but shooting just the RAW was.
    For the missing file issue try the three fixes below in order as needed:
    1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
    2 - rebuild the library using iPhoto Library Manager as follows:
    Using iPhoto Library Manager to Rebuild Your iPhoto Library
    1 -Download iPhoto Library Manager and launch.
    2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    4 - In the next window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: It may take some time to create the new library if you have a lot of photos.
    3 - start over with a new library and import the Originals folder from your original library as follows:
    Creating a new library while preserving the Events from the original library.
    Move the existing library folder to the desktop.
    Open the library package like this.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the iPhoto Library on the desktop into the open Photo window
    This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Can't import RAW files into iPhoto 6 Library from Nikon D700

    For whatever reason I am unable to import RAW files from my Nikon D700 into my iPhoto 6 (version 6.0.6) Library. I can import JPEGs from the D700, but it's no-go with the RAW files. When I attempt to import the RAW files I get the following message:
    "Unreadable Files
    The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)."
    Can anybody solve this mystery for me?
    Bob

    Bob
    I presume that the economically-priced Mac Box Set containing OS X 10.5.6 Leopard, iLife '09, and iWork '09 would be the way to go. Do you concur?
    Well that's the cheapest way to do it. You could, of course, buy a new Mac
    Do you feel that my 20" Intel iMac--details listed below--would have any problems handling the upgraded programs?
    It will have no problems with the updated OS or applications.
    'm uneasy at the thought of upgrading my operating system, but I presume that chances of running into problems are much less than if I were upgrading a Windows OS. In case a problem arises my entire hard drive is backed up with a 1T external hard drive using SuperDuper software, but I prefer not to encounter a situation requiring me to use it for restoration purposes.
    The key to any update or upgrade is to make sure that you have a good working back up. That way, should anything go wrong, you have a quick way back to where you started.
    My tips for upgrading the OS? Disconnect the disk with the back up and all other peripherals when you do the Upgrade. Pop the disk in. Do a standard Upgrade. (There are some folks who swear that you should wipe your HD and start over from scratch before you do, but, frankly, that's overkill. I've been upgrading Macs since 1992 and never had a problem.
    Regards
    TD

  • Imported raw files show as jpg

    Since updating to Lightroom2 (currently 2.6), whenever I import a RAW file from iPhoto - selecting to leave the photo in it's original location - it shows as a .jpg file once it is imported into Lightroom 2.  With Lightroom 1 it would import as a RAW file.  Is there a setting I need to select to keep Lightroom from automatically converting my RAW files to JPG on import? 

    Thanks for your help. It worked as you suggested except the corresponding jpg file that was made by the camera is imported into Lightroom along with the RAW file. Unfortunately, my Canon 400D will not shoot RAW files only, you have to have a large size JPEG along with it which is a waste of file space, but nothing that can be done to shoot RAW only.  So at the very least I can import RAW files as you suggest and then delete the JPEG. As far as iPhoto goes, I've been using it for many years and like it a lot.  I find it easier and more intuitive than Lightroom's organizational tools.  Lightroom is an exceptional tool for printing or prepping a final image for electronic distribution and that's how I use it. In short, I use each application for what it does best.  I only color correct, print or publish less than 1 or 2% of the thousands of images I shoot. Thanks again for solving this mystery! 

  • Big problem, cant import RAW files.

    Ok so I have a Canon 20D, and Ive been shooting all my photos in RAW format, and was hoping that LR can read it. On my homePC I have a card reader, so it sees the files as RAW, and .jpg and Ive got no problems. But when I try doing this on my laptop which has no card reader, every program including LR only import .jpeg files. The RAW files are nowhere to be seen. Is this something I can fix? is the camera at fault? Will it be possible to import RAW files only if I get a card reader for my laptop?
    All help is greatly appreciated.

    Are you connecting the camera directly to your laptop? I believe there is an issue with Canon cameras and Lr. Check Adobe's documentation.
    Also are you using Canon software to download from the camera?

  • Aperture 3.1.3 Very slow importing raw files

    Aperture 3.1.3 Very slow importing raw files please help
    Pro Photographer. I have a Mac Pro Quad core 1 yr old with 12GB Ram. I import via 2 Firewire 800 card readers - A Lexar & a UDMR Reader.Only using them singly. System has 4 1TB hard drives 1. Applications, 2. Aperture Library, 3. Aperture Vault, 4 Time Machine
    On a photo shoot, first CF card may download and complete in less than a minute but the next card with a similar number of images may take 10 minutes.
    Sometimes if I swap card readers, this can speed up download but then everything slowly grinds to a halt.
    I have closed down all other programmes, switched off Faces and Enable Gestures - switched off  Look up places.
    Situation driving me nuts as we shoot and view images with customers immediately after the session and download time effecting the amount of time we have to do this. Nothing seems logical as such a high spec machine should theoretically fly through this.

    Have you upgraded your OS ans all your Apps to the latest Versions and also rebooted the system?
    Turn on the Activity Viewer (Windows ->Show Activity) while importing, to see how Aperture is spending its time.
    Also launch some tools from the Application -> Utilities folder:
    launch the Console window, to check for diagnostics /error messages
    launch the Activity Viewer, to see how much RAM and CPU time Aperture and other processes are using.
    How much space is free on your system drive? And on the drive you are importing to?
    If you find in the Activity Viewer, that Aperture is slow, but de facto using not much CPU time, then the problem may be a corrupted Aperture Library or corrupted preference files.
    Try to import into a new, empty Aperture library and see if the problem persists.
    If you have no problems with a new Library, try the Aperture 3: Troubleshooting Basics:
    http://support.apple.com/kb/HT3805
    Start with repairing permissions and repairing the library.
    If none of the measures outlined there, or you need further help, please report back.
    Regards
    Léonie

  • Can't import RAW files from Canon Powershot S50.

    iPhoto6 will not import RAW files from my Canon Powershot S50. It says the files are "unreadable". Image capture will import to the desktop, but neither iPhoto nor Photoshop Elements can open the file. I checked and the S50 is supposed to be compatible with OSX and RAW files.
    SFR
    Macbook Pro   Mac OS X (10.4.7)  

    I agree but I was responding to someone with an S50. That's hardly an "advanced amateur" camera. iPhoto has some rather neat catalog features but the editing is purely for the snapshooter. Heck, I suspect that redeye removal is the most popular feature and, as far as I'm concerned, if you have redeye to begin with, you're a snapshooter.
    I'm an extremely advanced amateur with my film setup but, because of cost, I'm still a snapshooter with my digital camera. My film setup is two Nikon N80s with a top-of-the-line Nikon flash head that I use only with a Stroboframe bracket. The bracket and the necessary extension cord cost me nearly $200! My lenses are pure Nikon, including a single focal length f/1.8, 85 mm. portrait lens.
    I consider 10 MP to be the bare minimum for "advanced amateur" shooting and both Canon and Nikon have recently introduced 10MP SLRs in the $1000 range. However, I'm waiting for the next advance - an SLR without the reflex mechanism - interchangeable lenses and an FP shutter but no mirror! Let's face it, the reflex mechanism adds cost but a digital screen gives the same view and even better (you can see the color balance) and screens are now available that can be viewed in bright sunlight.
    I'm also hoping for one thing that will probably never happen - physically larger CCDs so that I can get the same focus control (small depth of field) that I can get with my film camera.

  • Oly E-PL2: How do I override in-camera crop in imported RAW file?

    When I import RAW files from my Oly E-PL2 for which I have set an aspect ratio other than the native 4:3, Aperture reads this and displays the set ratio in both the thumbnail and in the viewer. How can I revert to the original 4:3 (the full RAW data)? I know the original RAW file still has all the data because if I export the original and open it in Olympus Viewer 2, the full 4:3 is there with the crop overlayed.

    So how could I solve this?
    In Lightroom, select "Save metadata to file" in the metadata menu in Library for the image you want to edit. Then Right (or control) click on it and from the popup select "Show in Finder/Explorer". Then a Finder (or Explorer) window will open where you can double click the RAW file (if you have set up Photoshop as the default editor for them), or you can drag the RAW file on Photoshop. ACR will open and you can do any edit you want. If editing the point curve is all you wanted, click on "Done". Now go back to Lightroom and for the image, select "read metadata from file" from the metadata menu. Lightroom will read in the new recipe in the xmp sidecar and update your image, including the point curve! You can only not edit it in Lightroom, but it will use it just fine.

  • Importing RAW files with keywords from Bridge

    Hi everyone,
    I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
    The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
    I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
    Why does this not work for RAW files? What do I have to do in order to get it to work?
    Thanks in advance for your advise
    /David

    When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
    Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
    There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
    Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
    Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
    Perhaps someone else will explain this better than I.

  • HT1665 Can iPod touch use CCK to import raw files

    I currently have the iPad CCK and I use it for importing RAW files from my cameras onto an iPad2 and iPad3.
    What is unclear is whether this would work to an iPod touch?
    My ageing iPod classic is coming to the end of its life and being able to use a touch as backup photo storage amongst other things whilst on holiday will save me needing to lug the iPad everywhere.
    I don't want to plug in keyboards or write files to SD/CF cards just use as it is intended on the iPad to import files.
    Many thanks in advance!

    This is the Help page you should read: http://help.adobe.com/en_US/Lightroom/3.0/Using/WSCF140965-2440-4b65-9F88-AA0283034B11.htm l
    It can take a little getting used to but once you have you will find it quite easy.
    By the way I rename my files with the date first (GW20110514-12345.xxx) which may be useful to you.

  • Problems importing raw files from nikon d610

    My lightroom 4.4 will not import raw files from my new nikon d610. I downloaded the converted but cannot get that to work either.
    Please help

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The above link provides the full list of camera models supported by Adobe Camera Raw and Lightroom. You will note that support for the Nikon D610 was introduced in Lightroom 5.3.
    You have a couple of options
    a. Upgrade your version of Lightroom to version 5, the latest update is LR 5.4. This will provide support for your raw NEF files from your camera. (LR 4 will not have any further updates)
    b. Download the free Adobe DNG Converter version 8.4 and convert the NEF files to DNG format and you can then import the DNG files into Lightroom 4. (retain copies of your NEF files for use with the Nikon software or other software that may not read DNG files.)
    Quote " I downloaded the converted but cannot get that to work either.
    Please help" If you are referring  to the Adobe DNG Converter if is possible that if you used an older version of Nikon Software to transfer the files from your camera to the computer the files may have been rendered unreadable by Adobe Software.

  • Importing RAW files from Nikon D810 help

    Photoshop Elements 12 will not import RAW files from Nikon D810. Why & help?

    Hi,
    Support for the D810 has only just been released in camera raw 8.6 but a version for PSE has not so far been released.
    My suspicion is that Adobe are about to announce a new version of PSE and may not provide support for the D810 in PSE 12 - but I could be wrong.
    For now, the only thing you could do is to download the DNG 8.6 converter and use that to convert your NEF files to DNG files. Then PSE 12 can use the DNG files.
    http://blogs.adobe.com/lightroomjournal/2014/07/camera-raw-8-6-and-dng-converter-8-6-now-a vailable.html
    Brian

Maybe you are looking for