Imported Reason audio not syncing with GB metronome

I'm working on a project in GarageBand that is built around a piano part that was exported from Reason. The Reason audio track is 128 BPM, so I created a GarageBand project that was the same tempo. The piano slows down at the very end of the song, so I set up the automator to adjust the GB tempo at the end. When I started recording other instruments, I noticed that the metronome was slightly off -- it starts out in sync, but the further along I get into the song the more out of sync it becomes (way before the tempo change at the end). I made the mistake of simply turning off the metronome and playing along with the piano track. Now I'm trying to add in some drum loops and the result has been disastrous.
So, what gives? Why aren't they in sync? Is there anything I can do about it? I'd rather not have to go back and re-record all of my instruments if that's possible to avoid.
Thanks.

After importing the GarageBand file into Logic I found that GarageBand for some reason had the the time signature changing slowly over time rather than instantly at the correct measure.

Similar Messages

Audio not sync with Video

I am using a Sony DVMC-DA1 to convert VHS tapes into Final Cut Express. After I finish capturing is says,
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
I have looked in books and feel that I have tried everything. The audio is still not in sync with the video. I am out of ideas. Does anyone know how to fix this?

What is the audio settings of your sequence? It has to match that of the video you're importing
I'm not familiar with the unit you're using to import but basically, if your video is 16 Bit 48K then your sequence, your timeline, as to be the same, say NTSC (or PAL) DV. If the video is being captured at 12 Bit, your sequence should be NTSC (or PAL) 32K.
Having mismatched audio rates in your timeline will usually lead to out of sync audio

Audio not sync with video using photo booth since os moutain lion was installed

Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
Good luck,
Clinton

Audio not synced with video on movie downloads

The audio is not synced with video on movie downloads from the ITunes store. I have downloaded many movies in the past from the same PC with no problem.

Hi Jimmyjoefl,
I understand that you are having playback issues with videos you have purchased from the iTunes Store. After doing some research, I found the following resource that describes your exact symptoms:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen.
Thanks,
Matt M.

Audio not syncing with Video when live streaming.

Hello, i was wondering if i could get a possible fix for a problem that's been keeping my streaming back. I am using a Dazzle capture card to stream video games, and Flash Media Live Encoder 3.2 to send out the feed. My video source is of course the capture card and i use a MAC program called "Audio Midi Setup" to create an aggregate device of both the dazzle audio and my microphone as an audio source for FMLE. This way, the viewers could hear both my voice and the game audio.
Everything works really well, except for one problem. The audio always occurs 6 seconds before the actions in the game that correspond to it, and my voice will mention something first before it happens, again off by 6 seconds. I've played around with a couple of the settings for audio and video, but no matter what, it's always a 6 second delay. I've had this problem for a while and am unsure if the problem stems to FMLE at this point, but would appreciate any possible help. Thank you

This is common for separately recorded audio. Sync the start of both clips. then go to the end and adjust the speed of the audio clip until it get's back in sync at the end. It should then be in sync throughout. You'll have to experiment to get just the right adjustment. My device's clips had to be adjusted to 100.4% speed to keep sync.

Audio not syncing with video in itunes

Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes). I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up. In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes). I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up. In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

Audio Not Syncing with video

When I go to test my video the audio and video are playing at different playback speeds. I'm trying to
create a video using Flash that requires events based on the song itself. Any idea how to make the audio and video play at the
same speed during Timeline playback and testing?

Syncing sound with animation in Flash is not an easy thing to do. First, understand that there are three ways of playing sound in your movie:
Placing sound directly in the timeline
Placing sound in the library and accessing it via ActionScript
Placing a sound file on the hard drive (locally or on a web server) and accessing it via ActionScript
Sound that's in the timeline can be synced precisely, but you can't use a sound clip that's very long. It's meant for beeps and such, not for an entire song. But if you use sound like this, set it to Stream for best results.
Sound in the library has a chance of syncing if you load it as a SoundChannel. Remember to import flash.media.SoundChannel at the beginning of your ActionScript.
AFAIK, there is no reliable way of syncing an external sound file.

Audio not synced with video

I imported from avchd (Panasonic Lumix) format and the video was all speeded up and the audio was not in sync. I have imovie 08, 7.1.4. It seems I should be able to use it. Your feedback is appreciated.

I have seen this article around but there hasn't been a correct answer. I have the waterproof Panasonic Lumix TS2 and I upgraded to iLife 09 because the guy on the phone said that's the only way I could retrieve my videos. Then after doing so, my videos play way too fast and the audio seems normal. In the other forum topics like this they all say that you need to upgrade to iMovie 09, same with Apples response to the Lumix cameras, but I have it and it still doesn't work or fix the problem.
Love this camera, love my mac, but now I am hating both haha.

Digital recorder audio not syncing with video footage

Am I missing the obvious and easy method? When we shoot weddings, we always use a separate digital audio recorder and lav in the groom's pocket as a backup device. When it comes time to use that audio, it always goes askew compared to the video's audio. My guess is this happens because the video is only recording 29.97 frames per second and not a full 30, whereas the digital recorder provides a real-time recording. So, I end up having to shorten the audio every 10 seconds or so (by cutting out a few frames worth of audio) to keep everything synced. Is there a way to convert the audio from the pocket recorder to a video format so it will stay in sync without the need for editing it? Thanks!

I tried the resampling and even though original file was 44.1khz and I did convert it to 48khz, after a few minutes go by the file still goes seriously out of sync. It's a 34 minute audio clip, and by the end of the clip, its about 3-4 seconds out of sync. Any other thoughts? Thanks!

HEP!!!!! The video and the audio not sync after export from Premiere Pro CC 2014

when i play in premiere it ok but when i export it become not sync whith the audio

i was do a test with some player ,when i play from all this player it result is not the same:
KMPlayer :Audio not sync with video
itune :audio not sync with video and very lag
QuickTime :Can't play anymore
Windows Media Player : Very good no lag and the audio perfectly sync with video
put in Audition CC2014 (Multitrack) :Audio sync with video but very lag
put in Premiere Pro CC2014 (create new project and put the video in) :very lag but audio was sync
Nero Kwik Media :Very good no lag and the audio perfectly sync with video

I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link

My i phone 4 is disabled showing connect to i tunes but my phone is not sync with my laptop reason for default is entering wrong passcode again

my i phone is not working only incoming are there.
showing i Phone is disabled connect to i tunes but my laptop is not sync with i phone 4
how do i repair it.
reason for default is entering wrong password again & again.

Hello rituvmishra,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario

My video does not sync with audio how do I get it to work

My audio does not sync with the video on a product I brought from the itunes store. how can I fix this?

Hey Faymz1,
Thanks for the question. I understand that you are experiencing issues with video playback in iTunes for Windows. The following resource provides information regarding this symptom:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Symptoms
This article pertains to video playback performance issues in Windows Vista or Windows 7.
Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen. [...]
Thanks,
Matt M.

PVC2300 recorded audio is not sync with video

Hi all,
I have a big big problem with my new PVC2300 network camera:
when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
For my usage this is a very big isssue... I hope there is a way to fix it.
Thanks in advice
Robert

I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
But this mode have a lot of problems (.asf format, large file size and continuos recording without the ability to start and stop the recordings).
I think that the desync is a bug (a very big bug) of yours activex control that makes the recording.
I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
Ok finnaly the cisco program works, but using it I found another problems:
after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface. I have installed on my system the lastest video codecs (for example: divx etc.).
For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
I think these problems are very serious for a product as is this camera.
I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
Thanks
Robert

New ipod suffle 4th gen will not sync with cd import

my new ipod suffle 4th gen will not sync with cd import,through itunes,other computer has no itunes

I'm not sure how the "other computer" is relevant, but on the computer with iTunes, you probably need to update the iPod's settings for automatic syncing, or load the new songs from CD manually.
In iTunes, if the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The shuffle appears in the sidebar, under DEVICES, when connected. Select it there. The shuffle's Summary screen is shown to the right. There is a checkbox for Manually manage music there. Is that setting currently checked or not checked?
If it is checked, your iPod is set to add and remove songs manually. It does not use automatic syncing to update content. This is how to manually add and remove songs from an iPod.
To add songs manually... Show a song list in iTunes. For example, select Music under LIBRARY in the sidebar, to show your main music library list. Drag a song from the song list to the iPod in the sidebar. You can do this with more than one song selected, such as the songs from that "CD import." Alternately, right-click on the selection and choose the command Add to Playlist -> [name of your iPod].
To remove songs manually... Click on the small triangle to the left of the iPod's name (in the sidebar) to drop down its content list, indented below the iPod. Click on Music there. The list of songs on the iPod is shown to the right. Select the song you want to remove and press Delete on the keyboard. You can do this with more than one song selected.
NOTE: If Manually manage music is currently not checked, your iPod is set to use automatic syncing. Please post back for info on setting up or updating the iPod's automatic sync settings. When automatic syncing is enabled, you make iTunes responsible for keeping your iPod "in sync" with your iTunes library.

Imported Reason audio not syncing with GB metronome

Similar Messages

Maybe you are looking for