Imported screen recordings are importing tinted red.

When i Import screen recordings into this version of imovie, they have a red tint, like really dark red. this never hapened before the update. thoughts? I used quicktime to screencast

I had that problem until I googled it and found that if you export the QuickTime .mov file from QuickTime (I used the 1080p format), the red tint went away.
Hope this helps.

Similar Messages

Screen recordings are frozen

Using 10.3 (727.4). Some of my screen recordings are frozen when I play them back. There is audio but no movement on the screen. I am taking excerpts from a video presention online. I play the vid, start the screen recording then stop the SR when I have what I want. Most of them work but some are frozen. Come to think of it there are time when I pause the video, then start the SR, then stop the SR. I don't know if that matters. I can't post a link because it's password protected. The file save as a .mp4 file.
Thanks

I had that problem until I googled it and found that if you export the QuickTime .mov file from QuickTime (I used the 1080p format), the red tint went away.
Hope this helps.

QuickTime 10.1 Screen Recordings are Blurry Once Imported into Premiere Pro CS6

I am doing some screen recordings on my Mac using QuickTime 10.1, but when I try to import them into Premiere Pro CS6, they are poor quality and blurry. It's difficult to read text and logos on the recordings are showing up fuzzy. Anything I can do to improve the quality with what I have? I'm trying to do a new site demo, so I'd like to have things appear more clearly. I am, however, by no means a video expert or Premiere Pro expert, so a lot of the output names and labels, I'm not familiar with. Is that what I'm doing wrong?

The NEW ITEM process will ensure that your editing sequence matches your video file
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn about the NEW ITEM process, including a picture to show you what to do

I think that everyone should know that Quicktime 10 cannot make stereo screen recordings. Quicktime 7 cannot make screen recordings at all.

I did a bunch of research on this topic and hope to save someone else the headache.
I was trying to use QT 10 to make some video tutorials on Mixing (audio) which will rely on high-quatlity audio capture along with the screen recording. While using QT10 the recorded stereo audio was being collapsed to mono, which not only changed the stereo soundstage, but also made the levels a bit excessive. I figured that this must be a communication issue between my firewire audio interface and QT10. I called Apple support to see if someone there may have encountered such an issue and if they had a solution.
After the support technician did some research he told me that QT10 only does mono screen recordings, regardless of the input sources selected. After a bit more research the technician told me to buy Quicktime Pro 7 and I should have no problem with that. I asked him directly "so it records stereo sources?"
He said it did.
Today I purchased Quicktime Pro 7.7.1. It doesn't make screen recordings at all. I guess stereo screen recordings are not a feature either (that's called sarcasm).Needless to say I was frustrated.
I guess the only solutions for this exist outside of Apple.
They were courteous and I felt that they wanted to solve my issue but I was given the wrong information and I wanted to pass that on the community.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Screen-recordings exporting seetings fcp 7

Hi,
I've tried to export some screen-recordings I've recorded in screenflow and then edited through fcp, but when i get the output, the screen-recordings are very blurry and flickering..
how do I get the best output?
ps: (there are normal video clips between the screen-recordings, so it's not only screen-recordings)
thank you so much in advance !

You need to edit in dimensions that FCP works with. So even though you captured the full screen in Screenflow, you need to crop to 1920x1080, or 1280x720.
And then export to FCP codecs. Or just edit in Screenflow. that's what I do.
Shane

QuickTime 10.1 Screen Recordings Blurry Once Imported into Premiere Pro CS6

I am doing screen recordings with QuickTime 10.1 that appear to be of good quality until I import into Premiere Pro CS6 and then they display and export very poorly and very blurry to the point that you can't read the text on the page. Any suggestions to fix this problem?

Hi Kristine,
Make sure that the clips are positioned on the X,Y axis as whole integers, not integers + decimal points. See if that works for you.
Thanks,
Kevin

IMovie 10.0 contains glitch. Clips become tinted red when imported.

Just throwing it out there. You are not alone. It was reported to Apple that some imported clips become tinted red in the newest version. A news article. If you would like to help, does anyone have a work around. I must finish an editing project and I've tried everything. After the first few clips, the rest are red. Tried restarting, quiting and reopening, every setting.

I just found the solution for others experienceing this. It seems it happens most with .mov files. I changed to a mp4 by changing the file extension but iMovie still turned it red. The way I found is to convert it using SmartConverter in the app store for OSX to the iPad option.

Importing high quality screen recordings into final cut

Please can someone here help me. Nobody in the Apple stores in London, great as they normally are, was able to help me.
I am trying to make a high resolution / quality video of screen recordings of a website for promotional purposes. I am able to make screen recordings using Quicktime7 and Screen Flow and assumed I could just import them into FCE, edit where necessary and then export into Quick time but here the problems start
1. Final Cut Express does not allow you to import screen recordings from Quicktime7. I was told the answer to this was to convert them into Mpeg 4 files using a free software called Streamclip. Fine. This works but by the time the files are in FCE, the quality is poor. By the time I have exported the video into quicktime so it can be viewed the quality is even lower. Result: Very low quality recordings
2. Using screenflow I can import the files directly into FCE but again the quality is reduced by the time they get there and again by the time they are exported into quicktime. Result" Low quality recordings.
I have looked at using 100% quality every where where this option is available but to no avail.
Finally an apple expert said the only option I had was to import the screen recording direct from the computer to my video camera via the video in port but that I needed to buy two connectors, namely video into dvi and then dvi into mini display port. Sounds laborious. Is this my only option? Do I need to upgrade to FC Pro (out of the question due to budget)?
I'm under time pressure. Any help very much appreciated!
Thanks
Chris

1. Whoever told you to convert to MPEG-4 is completely wrong and should not be working in an Apple store. FE only works in QuickTime using the Apple Intermediate Codec for HD material. It only works in specific screen resolutions used in video formats. 1920x1080, 1440x1080, 1280x720, and DV for standard definition.
2. Full resolution media from ScreenFlow can only be edited in Final Cut Pro.
You can record directly to a a camera but you need a high quality scan converter. Just doing it off a computer screen will produce rubbish video.

Pictures are tinted red when playing on TV

Has anyone experienced and/or solved this issue? When playing pictures from the library (not streaming) they are all tinted with a reddish hue. This happened after a few hours of normal operation. I restarted the machine and it did nothing to help the problem. i checked all the cables, the component cables are set correctly.i checked the TV colour menu, and everything is set correctly. i set the machine back to factory standards and after syncing the library again, i still get that red tint.
i bought this as a gift to a family member, but it's been more of a hassle than a gift...
anyone has any ideas?

Sounds odd.
Do movie/video trailers look red too? If so I'd suspect a loose connection in the leads or a failure of the TV component input or AppleTV component output - can you try a DVD player or something with component output to see if it narrows it down to AppleTV?
I assume the photos look ok on the synced computer - it is possible that the synced computer has a badly uncalibrated monitor and that the user has made the photos look good on the monitor which then causes them too look bad on a decent display. long shot that though. Is the famly member syncing from PC or Mac?
Any chance the images are in some peculiar colour space which AppleTV isn't handling?
Can you burn some images to a CD/DVD and display them via a DVD player - if so and they look odd it's likely to be the images.
Any example images you can post?
AC

Please help in restoring my Important emails (Red)

I accidently deleted my import tag(red) due to which I am unable to see my important emails.
I have 15000 email in my email account out of which approx 500 were imporatant.
I havent lost any email, just lost their tags. Mine is POP email server.
I did this just a minute ago. Please Please Please help.

does Ctrl + Z undo the action? It is undo.

I have calibrated with spyder4elite and now my blacks are tinted red, how do I fix this?

I have been using spyder4elite to calibrate my iMac monitor and until now the black and whites have been fine, but now my blacks are tinted red. Does anyone know what I might have done wrong? I recently purged my cache - could that have changed something? How can I fix it now?
Thanks in advance if anyone can help me.
Jano

Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
Regards.

Quicktime Pro X - Screen Recordings denied by FCP

Can anyone confirm that Apple has blocked the use of "screen recordings" made using QuickTime Player 10.0 in FCP 7.0? I've tried importing screen recordings using both the Medium Quality Setting (Codec: Photo - JPEG) and the High Quality setting (Codec: H.264) and have received the same message each time:
File Error: 1 file(s) recognized, 0 access denied, 1 unknown.

Thanks Fraky. I think you're right. Here's what I found:
Just to see what happened, I went to the file "Get Info" panel and changed the default "Open with" program to FCP. When I then tried opening the file it gave me the message:
"Unsupported Frame Rate.
Final Cut Pro does not support this frame rate or the way it is represented."
I took your advice and tried bringing the file into Compressor(3.5). Compressor recognized the file and allowed me to encode it to a different codec. I tried a number of different codecs, and they all imported into FCP just fine.
Does anyone know what the default frame rate of the "Screen Recorded" movies are that can be made with QuickTime Player 10.0? I find it a little odd that FCP wouldn't recognize the frame rate. Whatever the default frame rate of those "scrren recodings" are, it must be something unconventional as I know that FCP recognizes a wide range of frame rates.

People tinted red in photos

Ever since I have had my Rhyme, the skin on people is tinted red in the photo I've taken. I've tried adjusting the settings, but I can't seem to make it go away. It's very frustrating. Am I the only one having this problem?

Thank you all for your responses! I appreciate you taking the time to help out our fellow community members.
@steviewencha,
The camera is such an important part of our phone especially when wanting to capture a special moment in one life so I understand your concern. But don’t worry because I’m here to help!
I’ve research this and did not find it to be a known reported issue. Have you tried taking a picture without the cover on the phone? Try this and see if you notice a difference.
Also, try resetting and clearing data on the camera http://bit.ly/ISd3cz.
Post back if you need further assistance. I’ll be more than happy to help.
John B
Follow us on Twitter @VZWSupport

Reusing Screen Recordings in Captivate 6

Hi:
I have created a screen recording (software demo) in one captivate project that I want to reuse in another project. Is there a way to import the slides from one project into another project in Captivate 6?
I am running Windows 7, Captivate 6.1
When I try to copy and paste the slides, they appear faded in the new project. Any help would be greatly appreciated. Thanks.
Stephanie

Hi Lilybiri:
It seems that there is an object on my master slide that is a semi-transparent shape which was in the foreground and causing the slides to look faded. To fix the issue, I created a new master slide with no objects on it and unchecked the "Show Main Master Slide Objects" and "Use Master Slide Background" boxes, then unchecked the "Project Background" box. I applied this new master slide to my screen recordings and everything looks as expected.
Thank you for your quick response. Maybe this post will help others as well.

Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Imported screen recordings are importing tinted red.

Similar Messages

Maybe you are looking for