Imported still layers moving in frame when effects applied - CS4

Hello
I'm importing still layers from Photoshop into Premiere Pro CS4 as I want to create a depth of field in the stills. I've opened the still images in Photoshop and created new layers (via Copy, no feathering) of each of the main items in the photographs and saved as a PSD. I've then imported the separate layers into Premiere and have been adding gaussian blur to create a depth of field effect as I pan across the still.
The issue is that the layers are moving within the frame. When the keyframe is reached where the effect is starting or stopping, the layer moves up or down (depending on if the effect is starting or stopping) in the frame slightly, only a pixel or two, but it is very noticeable on playback. I've checked my motion effects and there is no movement applied there other than a pan. I'm racking my brains to think what it could be that is causing this, and how to fix it. Does anyone have any ideas, please?
Cheers
J..

I've just removed the vertical blur, leaving only the horizontal, and it's fixed the problem. How odd. It makes sense that the layers were moving up and down though, I suppose...

Similar Messages

When is it important to use "recompress all frames" (when saving)?

When is it important to use / check the box "recompress all frames" (when saving as quicktime movie)? And why?

If you've rendered a sequence and want it to re-render the video into the same codec as the sequence. You almost never need to do it.

Sound clip level lowers when effect applied??

Hi Everyone.
Does anyone know why it is that the sound level contained within a clip lowers substantially after the clip has an effect applied to it (such as Brightness/Contrast?)
Is there a fix???
I think I asked this question about 2 years ago... and I believe the answer was sitting on Dansangle site. I just checked but I cannot find it!
help?!?! please!?!
Nick.

A clip's volume is lower after you use an effect or title in iMovie 4
http://docs.info.apple.com/article.html?artnum=107944
(Two workarounds are in article)

Layers Moving Off Screen When I click Around

Hi everyone, I am experiencing an annoying issue with Photoshop CS5 12.0.4. In my normal and quick workflow I notice that at random times when I am in and out of the layers and onto the canvas, sometimes layers go sailing off screen eventhough I am not moving them. Its as if PS is tracking my movements off screen and just blasting the layers all around. I saw the problems last week sometime on the forum, but I can't seem to find the thread again. Anyone have any clue what the heck could be causing this?
Running windows 7 x64, PS x64, I also have a Logoitech G9X high res mouse.

Do you mean that the entire image pans out of sight, or further than you wanted it to? It sounds like the flick pan feature that came in with CS4. You hold down the space bar to pan, flick the screen with the left mouse button, and it keeps on going. Is that what you mean? If yes, then left click the screen to stop the pan.
Hmmm... Reading your post again, I am getting the impression that you know your way round the app, and it is nothing so simple.

How do you import still images at 1 frame?

Trying to import images as 1 frame so I can make a time lapse. Using FCP X. Please help, thanks!

You can't. You can make the images one frame once they're in the timeline. It's easiest to import the image sequence into the QuickTime 7 pro player and then export into a video format.

Quality issues when importing still images as frames for animation

hello,
i've imported roughly 600 hand-drawn and scanned (600 dpi) images as frames for video. the images themselves are really crisp and perfectly how i want them to appear. i've imported each to play for 2 frames then move to the next. once done, i save this video file as an .avi. i then repeat the process in order to layer the video (using Calculations filter) over and over again, to fill up the screen with overlapped, layered animations. in theory, these layers should all remain crisp, just like the scanned images. i was under the impression that the standard Export... > Movie... .avi file is essentially lossless and is best for editing, however when my process is completed, the final product is muddy, grainy, and pixelated. i'm not sure where i am going wrong, as i've actually done this process before with success.
is there a way to specific the working file as "high definition" or something similar so that the quality is just as crisp as the scanned images i am using as source
any help is appreciated - i am completely self taught in video editing and it is really bugging me that the file output is not how i envisioned.
thanks,
DB

I note you specified that the images were 600 dpi. The dot per inch are an issue only for printing a hardcopy. For video work, the issue is the pixel dimensions and the pixel aspect ratio. If your image is 600 pixels by 400 pixels with a PAR =1.0. If your sequence is 1440 x 1080 with a pixel ratio ratio of 1.33, then the images must be the same and PrPro must scale up the image. You can get good images from imported stills in PrPro. I prefer to rescale my images using Photoshop. I am told that the scaling algorithm in PrPro has been improved. But regardless, if you are scaling up, you will see degradation becauae Prpro has to interpolate between pixels to fill the video frame.

Importing Illustrator layers into After effects, released to layers yet still one layer- ?

Hi,
Please bear with me as this should be a simple fix but the situation is hard to describe.
I want to import layers from Illustrator into After Effects. I need the AI layers to have their "handles" (the four corners of the object) close in around the object and not spread out to the corners of the composition. I figured out how to do this: by "releasing layers to sequence" in Illustrator and then dragging them out of the group they were all in. Then I "import as composition - retain layer sizes" into AE. When I open the illustrator composition in AE, it's layers appear in AE as separate layers and with the layer 'handles' tight around the objects (all is well). BUT here is what I want to do: I have a layer/object in Illustrator that I "image traced" to make it black but it still has some white parts to it. So I drew two black rectangles around the white parts. But now when I bring it into AE, they all appear as separate layers (the image traced object and the two rectangles) but I want those black rectangles to be literally part of the object that I image traced. In photoshop this would be akin to "flattening the layers". I can do this in AI by "merging" the layers, but if I do that I am brought back to the problem of having AE put the layer's 'handles' to the corners of the comp window and not tight around the object. Frustrating!
So I basically want to be able to paint over/cover up the white parts of my object without that creating new layers/objects.
Thanks for reading!
T

I'm not clear what you are describing. Have you actually tried other import settings in AE? There is some bug with the retain layer size stuff, but other combinations might work. Also try exporting a PDF of the artwork and using that. This may work better.
Mylenium

Importing Still Frame .pict file comes in slightly squished...

...with thin vertical black bars on the sides.
I "save frame" as a pict file, edit the file in Photoshop without any resizing done to the file, save it into my iPhoto library as a pict file, import the file into iMovie with the Ken Burns effect TURNED OFF, and the frame appears to be slightly squished horizontally with a thin black vertical bar appearing on the right side of the frame.
This worked just fine in iMovie 3.0 as I ran several tests last year to see if this project of mine was going to work but now in iMovie HD 6.0........AAAARRRGGGHHHHH!!
And also, somewhat unrelated, why can't iMovie save an exact clean frame when using "create still frame"?
Any thoughts and help is GREATLY appreciated!

I don't quite remember what your original goal was but anyway:
If you want to manipulate a video frame in Photoshop:
Export the clips as Full Quality DV from iMovie.
Open the .dv with QT Player and Edit/Copy the desired frame.
In Photoshop File/New... should propose 720x480 (NTSC). Then Edit/Paste... and manipulate the image. Then flatten the image and Save as TIF.
Open the .tif with QT Player. Do Edit/Copy. Then do Edit/Paste so many times that you reach the desired duration (2 seconds, for example).
Then choose File/Export.../Movie to DV stream/DV, NTSC, 16:9.
Import the .dv to iMovie.
The colors seemed to pefectly match the original video clip's colors. I didn't touch the default color profiles at all.
One great benefit of that method is that no scaling is needed so every (unedited) pixel stays the same with no distortion. Of course you can set Photoshop to display the rectangular pixels as sqaure pixel aspect ratio (for 4:3 it is 4320:4739 ~0.9116 and for 16:9 it is (4320:4739)*(4/3) ~1.215).
Oh, no I remember where I got 875: It is (4320:4739)(4/3)720.

Speedgrade effects layers moving masks in stack

Any effect I apply, moves all my masks on other layers to the left.....no matter what the layer order or inheritance....
Basically I cannot add any blurs ect, without upsetting all my mask positions in the stack....
This may be because of non square anamorphic pixel ratios (i.e 1.5)
and this is in a direct link from PPRO, so grading layers are unavailable

Right, I did know about the adjustment layer clip....but this is a 1 hour timeline with a few hundred cuts and 6 layers of video so it's a little much to add adjustment layers per clip, also the effect is intended to be applied on a master clip in this case...which I guess defeats the entire idea of a grading layer.......i just thought a grading layer could fix this issue by breaking the operation into multiple pieces
yes the mask is physically moved to the left......I would say like 20% of frame size over.....happens with all effects.
i suspect it is because this is a Ppro square pixel timeline, with some 1440x1080 squeezed footage thrown in as well.....I think for some reason when any shader effect is applied it is breaking the mask aspect ratio relationship.
the mask polygon/bezier stays in place, but the effect of the mask is moved about 20-25% to the left

Set duration of imported still images down to 1 frame

Is there a way to import images into FCPX (10.1.1) and set it so the images will be only 1 frame when put on the timeline? Or to change their duration in the Event viewer after they are imported? I found the "duration" setting in the editing preferences, but that's in seconds and doesn't do what I want. For what I'm doing now I want them at 1 frame, but really I'm looking for total control of the length of bulk still images without having to cut each individual one down on the timeline.

Put them in the timeline. Select them all. Press Control-D. Enter 1 and press return.

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image?

Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image? We have allready tried to set stillimages duration in preferences to 0,08 sek, but it does not have any effect!

You can drag your images to the timeline, select all, ctrl-d and set the duration to 3 frames by typing 3 and enter.
Or you can use Quicktime 7 to "open image sequence", select the desired duration, export your animation to quicktime and import that into FCP X for further editing.

I want to import still images to make a stop motion animation, but when I try to change the duration of still images, it isn't reflected in the timeline. How can I do this?

I want to import still images to make a stop motion animation, but when I try to change the duration of still images, it isn't reflected in the timeline. How can I do this?

Tonaw,
If you import your still images using iPhoto, then the time you set for each still, using FCPX Perferences works.
You can set the durantion from 1 frame to as long as you want them view.
If you do not use iPhoto to import your stills, the default is 10 sec's.
FYI: This issue was brought up within a month after FCPX was released. They found out by using iPhoto, you had better control of the amount of time your still was viewed.

Importing .AI file (multiple artboards) into After Effects imports all layers?

Okay, so I've been trying to figure out this issue that I am having but the problem is a bit wordy to explain.
What I want to do: Import an Illustrator file, that is a single artboard from a multiple artboard file into After Effects and ONLY import the layers from that artboard.
What is happening: Artboard 1 with shape 1, artboard 2 with shape 2, and artboard 3 with shape 3. When I export them (Save as --> .ai --> Save each artboard as a separate file), in .ai the layers are correct (ie only shape 1 on artboard 1), but when I import the .ai into AE, artboard 1 has shape 1, shape 2 and shape 3 (they are all separate layers).
How does Illustrator determine what is or isn't in an artboard? I am seeing the other layers but they are only 1x1 in AE.
I am using Illustrator CS6 and AE CS6 and I've tried it both on Mac and PC, and haven't gotten it to work. The weird thing is that it WAS working correctly before.

I have (hypothetically), a three layer file each with a rectangle. Each rectangle is on a separate artboard. When I save each artboard as a separate .ai file (ie "Save as --> save each artboard as separate file"), in each .ai file, only the layers in each artboard are in the separate ai files:
artboard_01.ai only has layer with rect 1,
artboard_02.ai only has layer with rect 2,
artboard_03.ai only has layer with rect 3,
This is good, BUT when I import into After Effects, all three layers appear in each comp generated from the imported .ai files
comp of artboard_01.ai has layer with rect 1, layer for rect 2 (no content), and layer for rect 3 (no content).
comp of artboard_02.ai has layer with rect 1(no content), layer for rect 2, and layer for rect 3 (no content).
comp of artboard_03.ai has layer with rect 1(no content), layer for rect 2 (no content), and layer for rect 3.

Dropped frames when importing from sony dcr-hc52

hey all,
i'm getting a lot of dropped frames when importing from my sony cdr-hc52. anyone had this experience? is there a setting i'm missing that would correct this?
thanks in advance,
filmgrrrl

Hello kellyfromkenley, Depending on how you move the video or share the video from iMovie to iDVD it can make a big difference. One way is to go to the Share Menu > Share to iDVD. But the better is to Share to Media Browser instead. Try this:
Go back to iMovie and open your Project in Project Library.
Go to Share Menu > Share to Media Browser
Choose the Large size and let it run until it finishes
Quit iMovie and open iDVD.
In iDVD click on the Media Button, then click on the Movies button and look for your project under the iMovie star icon in the Media Browser itself.
Drag that project icon into the iDVD project window and burn another disk
I think you'll see an increase in the visual quality using this method.
The reason this has an effect on the visual quality is there's a whole different set of operations performed on the video when you first Share to Media Browser. The side effect of those changes in steps is a much better looking DVD from your iMovie project.

FCP 7.0.3, Canon XF100, saved some clips to a portable hard drive and now they won't import? Tried moving them back to the CompactFlash but still won't import?

FCP 7.0.3, Canon XF100, saved some clips to a portable hard drive and now they won't import? Tried moving them back to the CompactFlash but still won't import? iMac, 10.6.8

Well, for FCP to see this file structure and recognize it, you need to download the Canon XF Log and Transfer plugin...
http://software.canon-europe.com/software/0040354.asp?model=
>I don't have the original clips on the card.
Meaning that they didn't back up the full card structure? Lordy...very few shooters do this and it is maddening. If you don't have the full card structure, even with the plugin, FCP cannot log and transfer.
As for ClipWrap2...that should work. Do you have the right files?

Imported still layers moving in frame when effects applied - CS4

Similar Messages

Maybe you are looking for