Imported video edges cut out in monitor

Hi,
My imported video is 1280x720. When I play the video in Adobe, the left and right parts of the video are not viewable in the monitor as it plays.
How can I change the resolution of the monitor so I can view the whole video?

I have just relized that I should have posted this in Adobe premiere forum. My mistake

Similar Messages

Video play cut-out in DVD pro

Hi-
I have a few video clips that have been compressed in H.264 that I wanted to put on a DVD so that I can display them on a TV. I transcoded them to MPEG-2 using compressor 2 then imported them into DVD pro 4 and placed them on track V1. When I attempt to play it in the viewer it does fine for the first clip but when it crosses the boundary into the second clip the video disappears although the sound continues. If I pause the video at that point the picture reappears then plays normally until the playhead hits the next boundary. If I drag the playhead manually there is no problem in the video display. The video cut-out occurs in the simulator as well. I have checked the time codes and there are no gaps between the clips.
Thanks for your help.
1.8 GHz dual processor G5 Mac OS X (10.4.8)

This problem crops up from time to time. I sort of remember someone having a reason for it but I can't find it right now. It may have something to do with the audio and video clips not being the same length, but I could be off on that.
Nevertheless, it doesn't matter much, the problem only shows up within DVDSP. Once you build your project, which creates the Video_TS folder, you can open it in DVD Player application to prove to yourself that nothing is wrong. When you format the DVD it will also be OK.

Video Clips Cutting out

Can somebody please help?
I have copied some video clips into itunes and onto my Ipod classic. When they are in Itues they play correctly. When I play them on the Ipod they cut out about 2/3rds of the way through so I keep missing the ending.
Any advice greatfully received.
Thanks

hi patrickmathews,
Welcome to the Lenovo Forums.
Can you try to:
1. Try to change HDMI port and set HDMI source on the TV accordingly
2. Adjust the resolution of the PC and on the TV to 1024x768 and check if you the video still goes black on the TV. If everything works ok, gradually adjust the resolution.
3. If the Vizio has a default refresh rate of 120Hz, try to lower it down to 60hz
4. As per this reference, try to use a different HDMI 1.4/1.4a cable or a component cable to see if it's a cable problem or the HDMI port on the TV.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My ipod video sound cuts out after 30 sec

I play my movie and the sound cuts out after a while and then it only plays the video with no sound. It's not the video because it works fine on my computer and all the other videos are doing the same thing. I found if I rewind or fast foreward the sound comes back but only for a little while and the sound cuts out again.

This happens with the current firmware 1.1 upgrade on the iPod. You can downgrade the firmware to 1.0 and this will solve that problem. Doing it this way you won't have to restore the iPod which will erase it. If you can't do this then you can restore the iPod using the previous updater.
How To: Downgrade iPod Firmware
http://forums.ipodhacks.com/showthread.php?threadid=813
The other option is to use QT Pro which will work to correct the problem:
http://forums.ilounge.com/showthread.php?s=&threadid=146142
1) Open up the Video file in Quicktime Pro
2) Select File->Export
3) Select "Movie to MPEG-4" beside "Export:", then click the OPtions button
4) Select "Video" & make sure the "Video Format" is set to "Pass through"
5) Do the same for "Audio", then hit OK
6) Save the file

IPhone 5 internet video stream cuts out

iPhone 5 video stream on safari and in apps cuts out after a few seconds and displays quicktime logo, but I can still hear audio.
This happens on my wi-fi and on the 3G connection.
Solutions???

Have your carrier re-provision your account

I have a 2nd generation ATV and my audio and video is cutting out.

The problem is intermittent. Sometimes the picture continues and only the sound skips. Sometimes both the audio and video cut out and return a second or so later. This even happens on the menu screens where the video and/or sounds will "hiccup". This happens when playing internet conent (like from iCloud or iTunes radio) or when playing content resident on my home computer via home sharing. I've tried the setup at more than one house, on more than one Wifi network and hooked to more than one TV, but the problem still occurs. Can anyone offer suggestions for a solution?

Hello WanderNotLost,
The article linked below details some useful information and troubleshooting steps that can help resolve issues with playback on your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
Cheers,
Allen

Audio and Video sound cuts out when adjusting the volume whilst playing powerpoint presentations

I have just bought a new hp laptop and when running power point presentations with embedded media (for my job) I cannot adjust the volume of the sound when the audio or video file is playing. It simply cuts out and stops the video or sound from playing. I thought at first that this might be an Office 2010 issue but now it seems more likely to be a setting on the laptop. If anyone has any answers they would be much appreciated!! Many Thanks

I hear you on this. I just tested out the 3GS video for a concert where band mixed electronica and guitars.. boom boom satellites and I noticed when close to the speaker side of the stage the sound cut in/out. But when I moved farther away sound remained consistant.
What I may suggest is lowering the volume to mid range when closer to your sound source then
correct (if needed) using outside software.. iMovie Final Cut, etc..
Yes, I wasn't to please about losing sound on a what I recorded.. ~A~

Imported Video plays audio out of sync in PPro

Imported C-Span file using Houlo. I converted it to MP4 using Houlo. Plays well. Using Gspot it plays at 23.976 fps which Premiere Pro correctly identifies. However when I play the two hour file in the Source monitor at the one hour mark the audio is badly out of sync. I started a new project and only pulled up this video to try to make sure there were no other settings to affect this. I want to pull a couple of quotes. Where am I going wrong here?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Is your video file using a VARIABLE Frame Rate or a CONSTANT Frame Rate?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Video/Audio cut out

Hi there,
I am trying to edit a video file that is in .mov format ( see bellow a screen shot of the original file ):
It says it has 01:11:31 duration, but when i enter it in Premier it show's up only to 01:08:10 ( see bellow ), so the video and audio cuts at this point. Any ideas why this is happening ?

Same issue in Premier. Sees only until 01:08:15
General
Complete name                            : F:\Completed\Flo\Assets\05-03-2015\1.mp4
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 178 MiB
Duration                                 : 1h 11mn
Overall bit rate mode                    : Variable
Overall bit rate                         : 347 Kbps
Tagged date                              : UTC 2015-03-06 12:23:46
Writing application                      : HandBrake 0.10.0 2014112200
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 1h 8mn
Bit rate                                 : 109 Kbps
Width                                    : 1 650 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 3:2
Frame rate mode                          : Constant
Frame rate                               : 25.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.002
Stream size                              : 53.0 MiB (30%)
Writing library                          : x264 core 142 r2479 dd79a61
Encoding settings                        : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Color range                              : Limited
Audio #1
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 1h 11mn
Bit rate mode                            : Variable
Bit rate                                 : 139 Kbps
Channel(s)                               : 2 channels
Channel(s)_Original                      : 1 channel
Channel positions                        : Front: C
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 70.9 MiB (40%)
Title                                    : Mono / Mono
Audio #2
ID                                       : 3
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : ac-3
Duration                                 : 1h 11mn
Bit rate mode                            : Constant
Bit rate                                 : 96.0 Kbps
Channel(s)                               : 1 channel
Channel positions                        : Front: C
Sampling rate                            : 44.1 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 49.1 MiB (28%)
Title                                    : Mono / Mono

'cut-out' images from Photoshop import into FCE with unwanted background

I want to import some custom 'cut-out' images from Photoshop, but they come into FCE with a rectangular background around them. Is there a way to import just the irregular 'cut-out' image?
Bob

Make sure the images are RGB 8-bit and in a format that carries an alpha channel or Photoshop transparency like Photoshop, TIFF, PNG, even PICT.

Audio cuts out and video "freezes" every 10-15 seconds

So I recently switched to Verizon (about 2 weeks ago) for internet and tv. After about a week (with no video or audio issues), I decided that I wanted to get a DVR. So they shipped me a DVR Set Top Box - model is CHS 435HDC.
When watching live TV the problem isnt THAT bad...every 1-2 minutes the audio will cut out and the video will pixelate for about 1 second, and then it continues right along.
When watching a TV show that I recorded on the DVR it is REALLY bad...basically unwatchable. The audio and video will cut out briefly every 10-15 seconds, then it continues along normally for another 10 seconds or so then it cuts out for a second and continues again.
Obviously I'm going to ask for a different DVR to be sent to me but if it happens again with the next box I may just cancel and switch back to the "other guy". This is a pretty bad start to what I thought would be a new and better experience. (Im not even going to go into the horrible on-demand menu system.)
Wondering if anyone else has experienced this problem before with their DVR?
Thanks!
(Dont know if it matters but I am in Maryland)
Solved!
Go to Solution.

Generally but not always pixelation and picture break up is an issue with the signal to the set top box. Sometimes it's as simple as a loose coax cable, or the connector has come loose from the cable itself. There are other causes, but those are the easiest to start checking. I have sent you a private message to your forums inbox.
Lee_vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Video cuts out of frame when importing to timeline :( What to do?

Hi there!
So I have my initial video on my timeline and all is well.
However when I try to import another video with the same frame, it looks like it zooms in because it cuts so much of the frame that I can't even see my face anymore . I even tried viewing it in the preview window on the upper left side (which looks fine) until I drag it in the timeline.
Photo 1 : This is the initial video
Photo 2: This is the additional clip that I'm adding that cuts out of frame
Something I should specify as well is, I recorded audio & video separately and merged them through he merge option that Premiere Pro has but that shouldn't be a problem since I did the same thing with my initial video to sync the audio and it did not cut out of frame.
I am still new at premiere pro and when I look up tutorials, no one seems to have that problem. Any help?
Thanks

Can you import video footage from a tape camera via usb into final cut?

I have new macbook, late 2008, and I am missing the firewire port.
I have a tape camera so I cannot import video into imovie via usb.
If I bought final cut express, could I be able to do such an import?
Thank you.

Nope. USB only.
Connections and expansion
MagSafe power port
Gigabit Ethernet port
Two USB 2.0 ports (up to 480 Mbps)
Mini DisplayPort
Audio line in
Audio line out
Kensington lock slot

How do I import video and sound files from a hard drive into Final Cut Pro X?

I just installed the lastest upgrade to Final Cut Pro X. I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer?

File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

Imported video edges cut out in monitor

Similar Messages

Maybe you are looking for