Imported videofiles in Premiere without sound? Strange update or fault?
Did I miss something "new". Today I found out no matter what I do - if I export a sequence from the timeline and have it imported into the project it only imports the film but without any sound. With some codec I can play the clip as it should be in the windows 7 ultimate explorer but I sometimes also get automatically a HD-file and the sound files as wav as a separte thing. I never had that before. In fact what I want to do is to create a sequence from my timeline and have that as a separat HD-file to use whereever in the project. Especially if the sound is not the original one but added by myself. I have done that before and I would just get my HD-file and could play it in the preview WITH sound. Now all I get is the picture but .... like I said: without sound. That is not normal. So is that a rather useless update or a failure in the programme?
And how can I copy a sequence from a timeline and place it anywhere else on the timeline. Used to be so easy in a previous premiere version. Now copy and paste does not work at all anymore. And whenever I want to add a clip onto a layer, I have to shut all used layers, because otherwise the sound goes anywhere but where it should and might just place itself within another sound-layer.
Used to be all much better and simpler in previous editions.
So is that a rather useless update or a failure in the program?
Most likely it's operator error.
Several formats export image and sound separately. This is normal and desired for those formats, like DVD and Blu-ray.
Be sure to know what you're doing with exports, and choose appropriately.
You can copy any clips with the standard CTL+C 'copy' command and paste anywhere else in any sequence with the standard CTL+V 'paste' command. (Be sure to set track targeting first.)
Similar Messages
-
IMovie 9.0.8 import a MPEG-4 without sound
When i import a MPEG-4 movie to iMovie 9.0.8 it doesn't has a sound why?
ablyes wrote:
…i already tried a frensh install of mountain lion
I recommended a re-install of the app, not of the OS
… what do you mean by adding some MacOS Voodoo ?
do, what I wrote: re-launch your Mac while holding down the shift-key
this triggers the Safe-Mode, which is recommended by Apple as a maintanance-routine (best done before any updatres) ....
I called it 'voodoo' as some joke ... -
After Effects composition is imported into AP without sound
Hi, everyone
I've got a really frustrating problem with AE and AP CS4. Today AE has decided it will no longer render my composition that I spent days building. It's really nothing fancy, but it has lots of .MTS files, as well as some .mp3 ones, and I have just come across a post today saying that I should have converted the .mts before bringing them into AE. The thing is, although it sometimes complained when I was doing some test renders, it would nonetheless give me some stuff. Well, not today - it crashes from the first frames of the comp.
After pulling my hair out, I was hoping I could import the comp into AP and render from there. Up to a point, this works, because it does render and there are no more errors about "after effects error: error (4) reading frame from file (86 :: 2)".
However, my comp does not have any sound... is that meant to be or can Premiere be persuaded to import the sound, too?
Thank you so much for your help in advance because I am literally pulling my hair out...Thanks for this, Todd. I will give the updates a go (EDIT: it turns out I had all the updates...). I will also convert the .mts and keep my fingers crossed that replacing the .mts with the new files is as easy as you suggest.
Still wondering a bit why Premiere would import an AE comp without sound, though... That is seriously odd in my books...
Thanks for the suggestions anyway - at least now I have something to try. -
Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?
Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
LeonardoNow I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format : AVI
Format/Info : Audio Video Interleave
File size : 63.5 MiB
Duration : 2mn 1s
Overall bit rate : 4 388 Kbps
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=3, N=15
Codec ID : H264
Duration : 2mn 1s
Bit rate mode : Variable
Bit rate : 4 248 Kbps
Maximum bit rate : 4 001 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.154
Stream size : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : FF
Duration : 2mn 1s
Bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Stream size : 1.85 MiB (3%)
Alignment : Aligned on interleaves
Interleave, duration : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format : AVI
Format/Info : Audio Video Interleave
File size : 69.3 MiB
Duration : 2mn 11s
Overall bit rate : 4 407 Kbps
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=3, N=15
Codec ID : H264
Duration : 2mn 11s
Bit rate mode : Variable
Bit rate : 4 267 Kbps
Maximum bit rate : 4 001 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.154
Stream size : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : FF
Duration : 2mn 11s
Bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Stream size : 2.01 MiB (3%)
Alignment : Split accross interleaves
Interleave, duration : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work. -
Imported video from iPhone suddenly without sound. Thanks Apple!
Is there any way of recovering the original file from my iphone? Im used to Apple delivering products of high quality therefore I delete all files from my iPhone after importing to my computer. You shouldnt have to save the files just to make sure the import was a success. But this time I shouldnt have trusted this lousy piece of "equipment". I, full of anticipation, watched my movies. They have not sound! Why now!? Why these movies?! I have not changed any settings in my iPhone at all since last recording of videos with working sound and I have racorded videos with working sound after these.
The imported videofile have no sound at all. This is not a question about volume. VLC tells me there is no sound stream at all! Videos taken the day after have normal working sound. Presumably worthless iTunes messed up the importing and some great, priceless minutes of video gets destroyed because there is no sound!
Please someone help me recover the original files from my iPhone or get these minutes of video WITH sound. pleaase!
/CarlThe fact that you never heard of it doesnt change my situation. But thanks for the sympathy.
The problem still exists.
If it is not iPhotos fault. It must be Apples video-app on my iPhone. Right?! Its still the same company that made this junk. I dont know of any swith muting the sound while recording video.
I am also aware of the problems involved in saving data that has been flagged "OK to delete" by the OS.
Regarding the "try google tip" Im not sure if you are suggesting any other means of data recovery that wouldnt be proper to suggest on this website but still might work. If that is the case please insist on suggesting that method once more, maybe beeing a bit more specific?
If you are just beeing polite and havent got any more answers but still want to help by giving me standard answer. Thank you for your help but it wasnt enough. -
How can I import music without Sound Check attaching a volume adjustment to each track? I have "Sound Check" switched off in Preferences>Playback, but it still makes the adjustment when I import.
OR, how do I strip the Sound check values?
Many thanks.Here's my problem exactly:
I have a huge library of music I have imported from CDs. They all have dB adjustments attached to them via Sound Check. (These are not adjustments made by the manual Volume Adjustment slider in the Options preference menu.)
I play all my music through Squeezebox. Squeezebox recognizes volume adjustments in iTunes.
I want to be able to use the manual slider volume adjustment but not the Sound Check volume adjustments. In fact I would like to get rid of all the Sound Check volume adjustments since I find that they badly distort the music.
If I delete music from the Library and re-add or re-import (from computer, not CD), the music still has the Sound Check volume adjustment attached.
Simplest solution would be to have the ability to delete any volume adjustment (aka dB) from songs in the iTunes Library.
I understand how to remove any manual volume adjustments but not those imposed by Sound Check.
Many thanks. -
How Can I Import CR2 into Premiere Pro CC?
Hi, I have quite a lot of CR2 files that I'd like to import into a Premiere project. It's telling me that the file format is not supported. Is there a good workaround or plug in that anybody could recommend? I'm a little bit of a novice as Premiere is concerned. Any help would be terrific!
Thank you.Welcome to the forum.
Depending on which Canon camera is shooting the CR2's (those change with the model of camera), and depending on the version of the ACR (Adobe Camera RAW) module one has installed, then Photoshop, LightRoom, or Photoshop Elements, should be able to Open the CR2's, and Save_As (either with, or without processing - though I always do some processing). Jim's suggestion for PNG is a good one. In my workflow, I just stick with PSD's, as I often have many different uses for the files, beyond Video.
Now, Adobe updates the ACR modules, with some frequency, so if your specific Canon is not supported with the latest ACR, it soon will be added. Also, at points in the development of the ACR modules, Adobe will no longer be able to write the modules for older versions of Ps, PsE or LR, so one might have to upgrade the host program. An alternative to the Adobe programs would be the Image editor supplied with the Canon camera, as it should be able to Open the CR2 files, and then Save_As, to a format that PrPro can use. There ought to be a program with a name like EOS Utility, on the utility disc, that came with the camera.
Good luck,
Hunt
PS - as an interesting sidenote, Premiere Elements does allow for the use of ACR modules, and if those are updated, will allow direct Import of the CR2's, or NEF's (Nikon Camera RAW), or similar - so long as the most recent ACR module includes support for that particular version of Camer RAW. -
This morning I started my computer and firefox like normal. When I started firefox is said it was updating even though it didn't ask to update, which is normal for firefox. Then it restarted my entire computer. I haven't been to any strange websites lately and I have Norton, AVG and something else. This SAID it was Firefox, but it sounds like updater.exe is somehow a virus. Does Firefox ever update without asking and then reboot your computer without asking?
== This happened ==
Just once or twice
== this morningWhat I'd like to know is--why is firefox running updater.exe when I took the time to uncheck all of the boxes for updates? I prefer to decide when or if an update is necessary, and it's irritating to have Vista constantly alert me to firefox trying to sneak in an update. Mozilla busted by Vista...what's the world coming to?
-
As I mentioned, there is an error while trying to update photoshop, camera raw, etc. I receives message when you try to download the update, an error occurred. Exit and try again later.
What to do? Without Camera Raw update I can't open Raw files from my cameras. Guy from chat on adobe website just give me link for support website, it's ridiculous.abdzi schrieb:
Hi,
Finally I made an update. I used download files from Adobe update pages (the same websites that were offline for few days), I couldn't do it automatically from PS CS5 application. Last problem is Adobe Extension update, can't do it automatically and manually becouse there are no update files for Adobe Extension CS5 for Windows (only for Mac). Most important is that my Camera Raw can open files from my cameras now. Thank You for your help.
Hey abdzi could you give a short explanation were you found which download files?? I have the same problem and realy need the Camera Raw update. Please!! Thank you -
New Problem - video loads, plays a bit, pauses, then plays without sound.
On the first time that I used the TV-Out feature of the iPod, videos that normally were playing properly started to lag. The video would play about 15 seconds, then stop playing for a few seconds, then start again, but without sound. I just thought it might be because of the TV-Out feature, but after that incident, a large amount of my videos have been doing this, without using the TV-Out.
My first use of the tv-out feature was around the time that I first updated the iPod firmware. I now realise that I have no need of the updated firmware, so would be willing to restore the iPod to factory settings, but would rather get some opinions first.
Although these videos had played normally before, now they (and most all videos I have added since), do this when playing:
Load up normally, play normally for about 15 seconds, pause and do nothing, then continue playing but without sound. If I use the clickwheel to skip ahead after it pauses, it will play normally for another 5 seconds or so and then pause and cut the sound again.
I had not experienced anything like this before that first time I used the TV-out capability. Nor had I experienced it before updating the iPod. Now, many, but not all of my videos are doing this.
Oh, it seems only the videos longer than 10 minutes are doing this... all the others work... some more testing would be needed to be certain. Video podcasts are playing fine. So... anyone else had this happen?This problem seems to occur for the 60GB models that are using the new firmware 1.1. It has been posted all over google and the only fix to this problem is to downgrade to 1.0. The problem is reported as not to affect the 30GB models but there are a few videos on my ipod (30GB) that suffer from this as well. I haven't downgraded by 30GB one to check if it fixes it, but I can assure you that it will fix the problem for the 60GB one (I used to have that one before).
-
Maximum File Size of .dv Import File to Premiere Pro CS5?
Hello Community:
I searched this forum and Google in general, but could not find an absolute limit on the media file size I can import into a Premiere Pro CS5 project. I'm scheduled to process the ".DV" recording from a conference, which could go on for hours. I have asked the camera man to break up the recording in one-hour segments, but I'm getting some push-back.
Is there a specific size limitation on importing an NTFS file structure .dv file in Premiere Pro CS5?
Thanks,
Rich LocusSame issue. I previously used NeoScene to convert .mov files from a Canon 5d mark ii to the easier to edit with Gopro Cineform .avi format in Premiere Pro CC. They used to work fine but now Premiere only recognizes a very small part of the file. The first 18 seconds of an 8 minute file.
I tried importing the file to a new clean scene and the problem remained.
I need to be able to work with this footage. Somehow Premiere is no longer able to properly read clips it used to be able to read.
I would like to hear something from Adobe on this issue.
EDIT: I just updated my GoPro software to 2.0 and the problem was instantly solved. The same might apply to TechSmith.
EDIT 2: Upon rendering the edit I discovered that while the entire length of the clip was represented it in fact stopped playing new frames at the same frame as it had before. So no luck. Updating GoPro Cineform made the length of the file display correctly (7min) but did not actually let me play the file beyond the first 18 seconds - it just showed the same frame.
I deleted all preview files and cleaned Media Cache files (under media/preferences) - this didn't help.
Finally I made the file offline, closed Premiere, changed the file name and re-opened Premiere. Then I right clicked over the file in the Project window and chose replace file to re-connect. The file finally came in correctly. I've now rendered it and it runs through the entire 7 min.
Message was edited by: ereitz -
I am not sure if it is a iTunes, AppleTv, Airplay or Time Capsule issue – or a combination of them all.
But i am experiencing alittle annoying issue, which i hope to fix.
I am playing music from iTunes 11.0.5 and i Airplay it to my AppleTv it plays with sounds and all as it sould. But often we it continues to the next track, I can see it plays because the playcounter is running and it Scrobbles to Last.fm – but there is no sound. I then have to pause and press play, or skip back to beginning of the track. Otherwise it can continue to play the rest of the album, just without sound.
I think it might have something to do with all the media files are stored on my Time Capsule, but the iTunes folder containing the .itdb and .itl are still on my local HD. It is as if it doesn't load the files properly. But i don't have any issues with movies files.
Is it a iTunes Time Capsule issue? And if so, any fixes? I tried updating to latest firmware, but it didn't resolve the issue.
Or could the problem be soemthing else?
I do have a pretty fast internet connection both in upload and download.
MacBook Pro 10.8.4
iTunes 11.0.5
AppleTv 2.gen (lastest OS)
Time Capsule 4. gen. (7.6.4)Try using this application to convert the videos, or the instructions in this article.
(15110) -
I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd -
OS X without a firmware update?
this is my story and I'm sticking to it....
I should start by explaining that I'm an aging hippie who started on a macintosh in '91 or so, but moved rapidly into the PC world of Windows by '92. I have a bit of understanding of the Windows differing systems from DOS thru XP. However I do lack ANY understanding of macintosh since then.
My primary reason for moving back is one of my sons has a new G5 and he loves it and doesn't have to run all the security I do and it is fast. NO, I'm not interested in an intel mac, all I really wanted was garage band, so he and I could create music. Now we can cut to the chase....
I recently purchased a G4 AGP 400 with OS X 10.4?? installed on it. It still had files on it from the previous owner, so I puchased a new OS X disc package. Went about installing it and I feel it was successful. Sinc then I have had random issues and have been lucky so far in that I have been able to find answers on these forums which is great...however...while browsing thru here last nite I became aware that one needs to do a firmware update to successfully run OS X and it appears that this was not done on the original install on this computer and as of this morning I find that the Boot ROM on my machine is 3.2.6f1.
Now to my question, how do I get the updated boot rom to install if i do not now or ever have had a 'native' system? Can any of you experts guide me?
mark
BTW Power Mac G4, 400mhz, 40M HD, 512MB ram, original graphics card,
usb card, 10.4.7 currently
G4 Mac OS X (10.4.1)boox:
The most critical bit of info with most issues is the model of your Mac. (It would be a good idea to put that in your user profile instead of just "G4," which applies to more than 1/2 a dozen models, for future reference.)
If there is any uncertainty at all about the model, you can use the "Find by Serial Number" search on the Support Specifications page to identify it. You should compare the results of that to "Power Mac G4: How to Differentiate Between Models", & to what the System Profiler app (/Applications/Utilities) says about it, looking carefully for anything that doesn't match up among the various descriptions, particularly for things like hard drive size or kind, PCI cards, etc.
This is important because with a used Mac of unknown history, you can't assume too much about its current configuration from the nominal OEM one.
For instance, this might explain how Tiger got on your Mac without a firmware update: the drive may have been in another Mac when Tiger was installed. It would also help resolve any problems/issues you might have with Tiger on this Mac.
For your #3 question, I think your best bet is to post a pointed inquiry in the Apple Discussions forum devoted to Power Mac G4 issues, with a title that makes it clear you want the updated firmware revision string for your model. That should get you the info you need quickly.
Good luck! -
CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4
CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4 they only appear in the monitor when the play button is activated. The other clips appear without a problem. I noticed that the same situation arises when I dynamically link to Encore CS4. What am I doing wrong?
Thank you Ann. But the problem is when switched on the AE clips on the timeline are only viewable when I start the project (ie press the space bar) and as it also doesn’t appear in Encore I am afraid to spend a great deal of time creating a DVD with these clips not appearing. Any advice?
Regards and again many thanks
Stanley
Maybe you are looking for
-
Help - iMac Storage/New user account question
Ok - so I've assumed that my user account was corrupt as Ive been having problems with Safari crashing/freezing the whole of my Mac, but thats another storey. So i decided to create a new user account to delete the old one. I copied the following fol
-
T61p + Windows 7 64bit + Intel AMT Drivers.
Hi all, I've recently installed Windows 7 x64 on my T61p (6459-CTO). I've installed the drivers and all the devices and running fine except two: PCI Serial Port PCI Simple Communications Controller After a failing to find drivers for these, I googled
-
I want to update a table with data extracted from a xmltype. But Oracle extracts only the first value from the subquery. Am I missing something or this is the expected output... drop table t create table t(id number, val varchar2(20)); insert into t(
-
Here's the problem: There were double entries for all my notes in Apple Mail.app but not on my iPhone or iPad. I tried resetting data on phone and iPad and there were still single sets on the devices and doubled in mail. I made sure all the notes wer
-
after hanging up from a phone call, the screen turned white and will not respond to anything. Im hearing texts and calls come in but i cannot answer them. tried pressing both sleep and home button and it shut the phone off for 5-7 min and then turned