Importent6.dll fails to register on WTS (Citrix & Windows 2003 64bit)
Hi,
I am trying to install the BOE XI 3.1 client tools on a 64bit Windows 2003 R2 SP2 machine (used as Windows Terminal Server) and I get the message that importent6.dll and exportSDK.dll fail to register during the installation.
Did anyone of you out there had a similar problem so far? Due to the error I cannot get the import wizard installed.
Additionally it would be interesting to know if it is possible to use the import wizard XI 3.1 as a terminal server application in a WTS (64bit) environment.
Regards,
Stratos
Hi,
with regards to the "(x86)" folder i would not recommend installing the BOE Client Tools into that folder. Please create a own Folder (you can for sure do this on drive D:) and install it into the folder. You could create a "Program Files" folder instead of installing it into the "Program Files (x86)" Folder.
About the Errormessage of your .dll`s please check SAP Note - 1205687
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303536383726
About Windows7. Windows7 is only supported since SP3. Please use the SP3 Fill Build setup routine for the BOE Clients for installing on Windows7.
Regards
-Seb.
Similar Messages
-
Getting "querypanel.dll failed to register" on Windows 7 32 bit machine
Trying to move from CR 2008 SP2 to CR 2008 SP3.
For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005. we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed MS VC++ 2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register" went away on XP and Vista machines.
Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
Q1. By installing S VC++ 2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
Thanks for your time.Moved to .NET SDK forum.
Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
If you use the CR MSI package rather than the Merge Modules it should work.
Thank you
Don
Edited by: Don Williams on Nov 9, 2010 2:16 PM -
I am trying to install iTunes, and get this error: "Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Any ideas on how to fix this error, or get the install to comlete?*complete...
-
CR for VS2010 deployment - crtslv.dll failed to register
I'm still having problems with packaging up the CR for VS2010 library with our applications installation.
I'm using InstallShield 2011 for the installation setup.
I've included the CRRuntime_13_0.msm file. (That is the only MSM file I included, are the others needed also?)
I've included the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86 and the x64 versions.)
I have tried to do a test install on both a 64bit and a 32bit Windows 7 computer and it keeps giving me the crtslv.dll failed to register error on both computers.
Error 1904.Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crtslv.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I thought it might just be due to the 32 bit MSM causing the problem on the 64bit computer, but I can't even get it to install on a 32bit computer. (On the 32bit computer install, I even removed the x64 bit version of the MS C++ 2005 Redistributable from the installation setup just to make sure it wasn't causing a problem).
I have even tried having my Install Shield setup 'Chain' the CRRuntime_32bit_13_0.msi file to my main installation (not using the Merge module). Even when that runs, it produces the same crtslv.dll failed to register again.
BUT, if I run the CRRuntime_32bit_13_0.msi manually on the computer it installs correctly. (I even tried using the same /qf parameters that InstallShield is using on it and it also worked OK that way.) So I can't figure out how to get it to run in conjunction with my InstallShield installation.
Can anyone give me any suggestions?
Mike...I finally got past this issue and got things to install, with a few hackish work-arounds.
First the CR13 msm redistributable appears to requre the 32 bit version of "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security" that you'll read about in every post. On 64 bit machines I found that even when it was installed,I would still get a crtslv.dll failed to register message, followed several other dlls not registering. Once I installed the 32 bit version on the 64 bit OS, the crystal 13 redistibutable installed fine everytime. I did this on several 64 bit VMs all running Server 2003,XP, and Windows 7. It ran fine every time.
The problem you'll face is how do you install the 32 bit version of this ATL security pack on a 64 bit machine. You may be able to download and run the 32 bit version from Microsoft's site with the link Ludek has posted. That wouldn't work for me because I had to distribute it with my software so I used the prerequisite available for InstallShield. The prereq however is designed to only run on 32 bit machines, so I edited it in InstallShield and modifed the conditions to allow it to run on both 32 & 64 bit operating systems.
The next problem encountered is that this 32 bit prereq getting installed on a 64 bit machine will result in an error being returned that the installation appears to have failed. Well it is a 32 bit installation not intended for a 64 bit OS and we're not supposed to do that. I did say hackish work-around. The 32 & 64 bit files are installed to different directories and the 64 bit version does not get overwritten. If you check the event viewer you'll see a message logged in that the installation of the ATL prereq completed sucessfully. So I modified the behavior of the prereq in InstallShield to "continue the setup if the condition still indicates it is required after completion". Now it runs without error and everything for Crystal installs sucessfully.
The final problem was also with the pre-requisite. The code determines if it is already installed by looking for the file:
[WindowsFolder]\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_473666fd\ATL80.dll
I found on some machines it was previousy installed to:
[WindowsFolder]\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\
This results in the prereq being required every time because the file it's checkig for is not found. Furthermore, it fails every time, most likely because it's alreday installed and not supposed to be installed again. So once again, I modified the prereq conditios in InstallShield and made it look for the file in both locations to determine if it was installed.
I haven't seen any problems since with either the Crystal runtime or the ATL update. Happy day.
The part I stll don't understand is that SAP says they can't distribute the ATL update in their MSM because of licensing issues, but we can sell our software and distribute it freely. Microsoft even create the prereq so that we could distribute it freely. So why can't SAP distribute the required files for their runtime? A lot of people on these threads have wasted a lot of time and money on this issue. Ludek provides great support but maybe this issue needs to be investigated further by development. -
DTSAGENT.DLL failed to register when trying to install CRRuntime_32bit_13_0_7
Hello together,
maybe some can help me with an installing issue with CRRuntime_32bit_13_0_7.
When i try to run the setup i get the error:
Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal
Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dtsagent.dll failed to register.
HRESULT -1073741819. Contact your support personnel.
I found something following the link: http://scn.sap.com/thread/1948999 but it didn´t really fix my problem. I think it´s a problem with the constellation of McAfee that is also using the dtsagent.dll
I welcome each comment, feedback and each suggestion which could help me to fix this problem.
Thanks
ChrisHi Chris,
This issue has been discussed many times before. Please use the top right corner search box.
I searched for "error, 1904, install, crystal, visual studio" keywords and here are the results.
http://search.sap.com/ui/scn#query=error%2C+1904%2C+install%2C+crystal%2C+visual+studio&startindex=1&filter=scm_a_site%28scm_v_Site11%29&filter=scm_a_modDate%28*%29&timeScope=all
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications. -
Hi,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on windows 2008 R2 servers.Why StatusAgentProxy.dll fails to register.
<![LOG[MSI: Action 22:08:03: RegisterTypeLibraries. Registering type libraries]LOG]!><time="22:08:03.092-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Action 22:08:03: SelfRegModules. Registering modules]LOG]!><time="22:08:03.827-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.]LOG]!><time="22:08:03.889-330" date="12-18-2013" component="ccmsetup"
context="" type="3" thread="8096" file="msiutil.cpp:300">
<![LOG[MSI: Action 22:08:03: Rollback. Rolling back action:]LOG]!><time="22:08:03.952-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text:
ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I've already checked this forum but nothing helped .
Please provide a valid action plan to resolve this issue.
I'd highly appreciate any help.
Thanks and regards
ArsalanHi,
Restart those server might be helpful.
After installing the Client manually, you could check the registration of statusagentproxy.dll in that log.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Client installation: MsiHandler.dll failed to register. HRESULT -2147024769
Due to a company merger, I had to move approx 200 clients from a SCCM 2012 R2 site to a SCCM 2012 SP1 site. I did this by uninstalling all clients, uninstalling the SCCM 2012 R2 site, cleaned up, set up boundaries and AD publishing on the SCCM 2012 SP1 site,
then changing the SCCM SUP GPO to point to the new SUP.
Almost all clients successfully installed the agent and assigned to the new site , expect for 4.
I have tried:
ccmclean.exe
http://sccmclictr.codeplex.com/ (Reset DCOM permissions, Register common DLL's, Reset WMI Repository, Repair Agent)
None of these helped
ccmsetup.log
<![LOG[MSI: Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.]LOG]!><time="12:34:13.529-60" date="11-26-2013" component="ccmsetup" context=""
type="3" thread="3852" file="msiutil.cpp:300">
<![LOG[MSI: Action 12:34:13: Rollback. Rolling back action:]LOG]!><time="12:34:13.639-60" date="11-26-2013" component="ccmsetup" context="" type="0" thread="3852" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.
]LOG]!><time="12:34:18.014-60" date="11-26-2013" component="ccmsetup" context="" type="3" thread="3852" file="msiutil.cpp:872">
client.msi.log
CustomAction +MsiHandler_dll.EDFC37A5_EC0F_4170_9D99_8A7F441C1017 returned actual error code -2147024769 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (E0:48) [12:34:13:529]: Product: Configuration Manager Client -- Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.
Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.Hi Jason,
Thank you for your reply.
Correction, there are 3 affected systems. One is a Windows Server 2003 SP2 32-bit, the last two are Windows Server 2008 R2 SP1. All three have the same error.
The msihandler.dll is extracted from the client.msi during installation to the C:\windows\ccm folder. When the installation fails, it rolls back and deletes the CCM folder. But I was able to get a copy of the msihandler.dll file, and tried registering it
manually, which failed with a general error that the specified module could not be found. I also copied the file from a working system, but it still failed.
The Windows app event log reflects the same error during MSI installation as the log files.
The systems does have SCEP from the previous SCCM site installed and running. I uninstalled it on of the the VMs and rebootet, but SCCM client installation still fails with the same error. -
NetWeaver and WTS on Windows 2003 Ent. 64bit Machine
Hi,
Does NetWeaver 7.0 able to install on an Intel Server (Windows 2003 Ent. 64bit) with WTS (Windows Terminal Server)? I try to check SAP note, SDN and Google but don't found any information about it. Thank you.
Cheer,
Sittidej K.I´m still not sure what you ask...
A SAP system is usually installed alone on the server, no MS Office, no SAPGUI - just the plain system. You can administer the system using WTS (which is a supported way) but you should not run other applications on the same server.
There were problems in the past with some applications that could not be configured using WTS (e. g. DCOM connectors and other CRM related things) but you always have the possibility of using the console or other 3rd party tools to access the system and configure it remotely (e. g. VNC for free).
Markus -
I'm getting this error while installing client on server 2008 Sp1 box.
Steps i tried:
1.I did try manually registering oringinally but when the client fails to install, it removes all the source files including the ccmcore.dll. So, ccmcore.dll doesn't reside on the system after failing to install the client or at least not that
I can see.
2. I have tried timing it just right so that my "regsvr32 ccmcore.dll" is run during the install process while the file is in the CCM folder but that didnt work either.
3. I had manually created the directory CCM\x64\ccmcore.dll and copied the file from a working client and try to register but it gave me an error " Failed to load .dll"
4. i have tried uninstalling the client from ccmclean as well but no luck.
I'm running SCCM 2007 Sp2 native mode and trying to manaully install the client.
Please help?*complete...
-
Crystal Reports 2008 - Error 1904 - DLLs will not register
I have just tried to install Crystal Reports 2008 on a PC which is running on XP Professional 2002 (Service Pack 3) and none of the DDLs will register. I have administrator privileges on the local PC.
I could possibly try to register the DLLs manually but I don't understand why they won't register automatically.
I would really appreciate some assistance with this.
Kind regards, Leeanne
I received the following errors....
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportPromptEMF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportSourceBridge.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\busobjReporter.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClient.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientAddin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientTemplate.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Webi.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\qaaws.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MetaDataPlugins.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\lovconvertor.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EnterpriseControls.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Xcelsius.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Flash.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EventServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FileServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\JobServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\DocProcessingServerAdmin.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EnterpriseRepositoryAdaptor.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AuditProxyService.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Discussions.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\WebIntelligence.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CrystalEnterprise_SMTP.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\DiskUnmanaged.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Ftp.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Managed.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MDS.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Connection.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Favorites_Folder.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Folder.dll failed to register. HRESULT -2147024769. Contact your support personnel.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Inbox.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\LicenseKey.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ObjectPackage.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Profile.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Publication.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\User.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\UserGroup.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CacheSrvAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\PageSrvAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\SAWebAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CMSAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Calendar.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Event.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Excel.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Hyperlink.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\PDF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CustomRole.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Powerpoint.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Program.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Agnostic.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\RTF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ScopeBatch.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Server.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ServerGroup.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Shortcut.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\TXT.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Word.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AFDashboardPage.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AppFoundation.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\InfoView.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CMC.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Designer.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Encyc.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Encyclopedia.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MyInfoView.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register.Install .NET Framework 1.1 and 2.0 and then any patches Windows has for them.
Install the C++ runtime distribution from Microsoft, search MS's site for it, they have multiple links for each OS.
Download the latest Microsoft installer, you can go to MS's web site to get it.
Check with your IT department to make sure they have not pushed out a "modified" administrator Profile to your PC. Open up regedit.exe and confirm you can change any key in Current User and Software and anything. Be sure to copy the original so you can right the value back and the usual warnings about modifying the registry.
Download CR 2008 SP1 full build: https://smpdl.sap-ag.de/~sapidp/012002523100006555792009E/cr2008win_sp1.exe ( requires and un-install of existing CR 2008 if any are on your PC )
Before running CR 2008 Install SP 3: https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
You could also try Disabling DEP, right click on My Computer, Properties, Advanced tab and Data Execution Prevention and make sure it's set to windows Processes only. Requires a re-boot if changed.
Disable any and all anti-virus and local firewalls, copy everything local and disconnect your network cable so you don't get anything nasty and try again.
If none of the above works then try someone elses computer, your system may be beyond repairing and could require an FDISK and starting all over.
Thank you
Don -
Need help iNSTALLING cr2008..GET "FAILED TO REGISTER" ERRORS
I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctlyI would suggest making sure your machine is clean. Contact support for the steps to fully uninstall CR. For example, here are notes to uninstall previous versions of CR:
1218535 - How to manually uninstall Crystal Reports XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333533333335%7D.do
1216945 - How to manually uninstall Crystal Reports 10
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343335%7D.do
1216947 - How to manually uninstall Crystal Reports 9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333933343337%7D.do -
Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found.
About a month ago, the Desk Manager app stopped recognizing that my blackberry was connected via usb so I decided to remove/reinstall the Blackberry Desktop 4.3 software. Now, everytime I install the software I receive the following message during the installation:Errors 1904.Module C:\Program Files\Research In Motion\Blackberry\IS71 Connectors\OE Connector\OLKExpress5.dll failed to register. HRESULT-2147024770. Contact your support personnel. If I try to manually register the file it fails with the following error "Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found." My the desktop manager currently will recognize my blackberry as long as I don't disconnect the blackberry before first powering off the laptop. Any one have any ideas regarding this issue?
Perform clean uninstall of BlackBerry Desktop Software.
Check for instruction: http://www.blackberry.com/btsc/KB02206
After that go to here: http://na.blackberry.com/eng/services/desktop/
and download the latest (v4.7) BlackBerry Desktop Software.
I recommend to download BlackBerry Desktop Software without Media Manager.
Media manager is not necessary to transfer files to the device and vice versa.
Check this link: HOWTO : use your blackberry as a USB device -
Error 1904 - Module failed to register
I have been getting an error whenever I try to install Crystal Reports 2008 that says the following:
Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register. HRESULT -2147024769. Contact your support personnel.
I have upgraded to the latest version of .NET 4 and turned off all antivirus software (as well as attempted other remedies suggested in other posts). However, I continue to get this error during installation regardless of if I run my installer off the CD we purchased or the latest download.
If possible, please reply with a solution or possible cause.
Thank youHi All,
I´m with a same problem.
I installed the CR 2008 SP1 in my notebook and when the installation begins register the module ReportConvTool.dll the intallation does not continue and not display error message.
Someone know what's going on ?
Tks. -
I have been using iTunes with no problems for a while now but today it wouldn't open up. Said that I was missing files which to me sounds rather trojan/virus. But when I try to reinstall/repair it I am told that "Module C:\Program Files\iTunes\iTunesMiniPlayer.dll failed to register. HRESULT 2147023782. Contact your support personel." So that's what I'm doing. Help?
I had the same problem. May I ask if you use AVG, there are other posts regarding trojans etc, again my AVG decided I had them. However if you allow a certain path to be "missed" by AVG then it should solve your problems. If youre like me and uninstalled itunes, then you wouldnt have the directory so you would need to uninstall AVG, install itunes, then reinstall AVG and allow the forementioned directory. Hope that helps
-
Fail to Register Error - Desktop Manager
Hi,
Looking for some help here. Tryping to reinstall Blackberry Desktop Manager. Keep receiving the following errors when registering modules the the install 'hangs'. tried loading from the web as well as the CD same result.
Following is common on all errors:
C:\program Files\Research In Motion\Blackberry.....
\IS71 Connectors\ISGroupWise6.5.x\gw.dll
\IS71 Connectors\ISGroupWise6.5.x\gwAPI.dll
\IS71 Desktop Setup\DesktopSetup_pb.dll
\IS71 Action Engine\SyncAE_pb.dll
Failed to Register
HRESULT -2147024891
Not a computer buff by any means but carried out the 'clean installation' instructions with same result.
Appriciate anyones help on this.Hi and Welcome to the forums!
From you post, I cannot tell if you've done all of this or not, so I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
http://na.blackberry.com/eng/services/desktop/
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
I have just re-installed itunes. The previous user is still listed. When I try to login in with my account, Apple says to view my account. When I do that, it reverts back to the other user. I want the other user totally off of my system. How do I
-
Solaris 10 on Compaq ProLiantDL360 G2
I've visited quite a few threads in this forum & the answer seems to download a disk & rename the folder 2x to 210. However, I'm not sure which disk? ITU or DU? or is it the same thing? Also, the solaris 8 DU for DL360 contains 7 disk program. Is it
-
Hello, I am stuck with this problem... I am trying to clone an Array object of type MajorCat. Each MajorCat contains another Array of type MinorCat. MajorCat[] contains n MajorCat MajorCat[0] contains MinorCat[], of length m I wanna clone MajorCat[],
-
I am trying to test the Send for Review feature in Captivate 4. I am able to send it to myself, open the file, make comments, and then save it. However, when I send it back to myself, it is opening as a Microsoft outlook file, or else just as code.
-
Hi all, I have tried do a full export in oracle 10g2 in server A then follow by a full import do another 10g2 in server B successfully. But when i insert a row the10g2 server A and do a full export, follow by bringing the dump file to the database in