Importer and AEGP

Hi!
I have built an importer with Premiere SDK.
When using the importer in After Effects, is it possible to access the AEGP suites?
I have tried but no luck.
Thanks
/ce

Similar Messages

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

What is the difference between import and merge?

When setting up my wife's new account on my son's MBP, I did not migrate all of her photos as they were in 2 or 3 separate iPhoto Libraries. I researched this forum and found the best way to merge all of her libraries is to buy iPLM. According to a post by Terence Devlin, if I don't use iPLM, thumbnails, previous editing, keywords, etc., will not be imported. OK, but if we only want the originals photos and there was no editing or ratings or keywords, can't we just use the "Import" feature?
According to Apple's instructions, the way to import one library is to first switch iPhoto to open using that library (hold down the option key when opeining iPhoto and selecting that Library). Select your photo's, and the go to File>Export. Then quit iPhoto and switch to the new iPhoto Library and go to File>Import and select the file that was made during the Export. I suspect this is the approved method if you are not concerned with importing the edited photo's, keywords, etc. Is this correct?
I recognize from LarryHN's posts why you can no longer just drag and drop the files using the Finder, but if we don't use iPLM, I wanted to make sure I use the correct method to combine Libraries.
BTW, speaking of using the Finder, do any of you remember the Multi-Finder?

Yes that's correct. Remember you are not importing libraries or merging them or combining. You're exporting from one and then importing those exports to the other. That's getting the photos from one to the Finder. Then importing them.

Best app to import and study multiple choice questions.

Hi,
I'm searching for an app to help study for an exam.
Part of the studying strategy is to study by the previous exams questions. I have those (a lot of them) in text format.
The app would need to have:
- Support for multiple-choice questions;
- Easy, fast and automated way of importing the questions;
Would be nice to have:
- Ability to include a rich-text comment along with the right/wrong answer;
- Support for tagging each questions.
I've used the search function and found this:http://forums.macrumors.com/showthread.php?t=1041085 but it's been a while since then.
thanks in advance

Hi Konrad;
What approach would you recommend to import and export EBS data? Open Interfaces, PL/SQL, web services or anything else?For your question please check below notes:
Export/import process for R12 using 11gR1 [ID 741818.1]
Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
General Notes For E-Business Suite Release 12 [ID 986673.1]
Please also check below thread:
how to export data from ebs
how to export data from ebs??
Also check below search which could help you about your issue:
http://forums.oracle.com/forums/search.jspa?threadID=&q=import+export+&objID=c3&dateRange=all&userID=&numResults=15
http://forums.oracle.com/forums/search.jspa?threadID=&q=export+data&objID=f475&dateRange=all&userID=&numResults=15&rankBy=10001
Hope it helps
Regard
Helios

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Problem with importing and creating self signed SSL certificate

Mac Pro, 10.7.2 Server. Attempting to import or create a self signed certificate for use as ichat.domain.com to encrypt iChat service. Server is acutally called server.domain.com but has an alias of ichat.domain.com. I understand that this is probably not best practice but I would like to keep things this way since we have one server, run multiple services on it, but want to continue to connect to each service at SERVICE.domain.com. We have been using this type of mismatched certificate with success since 10.4 or so.
I am working through setup of 10.7 Server to replace our 10.6 server.
Tried upgrade of 10.6 to 10.7 installation. The installation made a mess of some services and our Open Directory, but did move the certificate over and allowed iChat service to function properly.
Clean install and setup of 10.7 Server. Exported self signed certificate, private key, and encryption password from 10.6 Server and functioning 10.7 upgraded Server.
On import or manual creation of certificate get the following error:
Error
Check your server's logs for more information. The error (code 5001) was: Expected SecKeychainItemImport to return a SecIdentityRef, but it did not
Log shows:
Dec 29 17:56:55 server servermgrd[498]: -[CertsRequestHandler(HelperAdditions) importP12Data:passphrase:error:]: importedItems = (
"<SecCertificate 0x7fcf6ed43c00 [0x7fff78d96f40]>"
I have tried importing and manually creating other certificates with a variety of names with success. I assume that there is something buried somewhere that is causing this particular one to be a problem. Other than manually removing any remnants of the certificate from /etc/certficates I do not have any ideas what to try. I am essentially ready to move this server to 10.7 except for this problem and would like to avoid a reinstall.
Suggestions?
-Erich

Take a look here.
https://bbs.archlinux.org/viewtopic.php?id=146649
Maybe it's a problem with your network.

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

I'm using Firefox with Ubuntu 11.04 and the Import and Backup-button cannot be found in the Library-window as instructed, how can I enable this particular feature on Ubuntu 11.04?

The import and backup-button is, however, where it's supposed to be on Ubuntu 10.10.

Ubuntu may have moved those three button as well to that control bar.

What is the best way to import and edit a large amount of footage?

Hello Apple world,
As a newbie to Final Cut 10 I have a question regarding best ways to import footage. I'll give you a quick run down.
I have a 150 gig of gopro footage that I just hit 'import' to recently (from my external HD), it took around 10 hours to process it all.
Its all under one event, but then somewhat organised into dates etc. But it is very slow. I imported it all at once because it was all footage from the last 6 months of my Whistler/states/fiji trip and want to make a movie out of it, using clips from all over the time, not just in chronological order.
I have the latest mac book pro, 4 gig ram,2.4 GHz i7, 750 hard drive, with nothing else on the computer.
Ive read about creating proxy media, after ive imported, but am still somewhat confused as to the benefit. Does it create duplicates? that will fill up my pretty large HD as it is!
Can you suggest any ways that might make my laptop run a bit faster? Should i delete and work directly from external HD etc etc?
Any suggestions will be greatly appreciated!
Thanks in advance
Harlee

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
I have PremierePro-CS5 installed.
This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
This format is already compatible with Bluray3D stereoscopic format.
1) But, how to edit the .MVC in Premiere?
2) What plugin should I use (if exists) for PremiereProCS5?
3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
Thanks!
Horsepower0171.

Sorry, I am Italian, it is very difficult for me to understand what he says!
I can just read the english text, or follow the actions of a videotutorial!
Thus my question is the same:
-What software can do that?
-Sony Vegas 10 do the Bluray3D authoring?
-For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

Re-Importing and re-connecting P2 files

Hi all,
I recently needed to re-import a whole slew of P2 files for a feature-length PBS doc (because of a frame jitter caused by fcp ver. 5.0.4 that was fixed in the upgrade). I dumped the older media and re-imported the files, but now, fcp doesn't recognize the name/path. I can turn off the "Matched Name Only" toggle and force it to reconnect the files, but when I do, two things happen: first - it gives me a warning that certain attributes don't match (the "Media In/Out Points," "Reel Name" and "Rate"). And second, I can only reconnect one clip at a time. This is a 30 minute feature with hundreds of clips.
Is there a faster way to force fcp to batch re-connect the media?
Any ideas?
Thanks.
Tim Walton

Hey Shane -
Am I glad you're here!
Hmmm....you didn't rename any of them when you first imported, right?
No, I didn't rename any of the clips.
How did you import the first time? This time? Was P2 log used? How did you import the files this time?
I did not use the P2 log. Originally, the .mxf files were simply copied to our NAS server using the P2 "Library" card reader. To this day, they haven't been moved or modified from that location. In both instances, I imported directly from the NAS into fcp by using the "File>Import>Panasonic P2" command. The "Import P2" dialogue window opened, and from there, I would select the folder with the .mxf files I wanted to import, and I'd choose, "Open." I'd select all of the files in the folder and add them to the import que (I noticed that the import interface has changed a lot from ver 5.0.4 - but I'm certain that isn't causing problems.)
Another related issue - I've gone through and reconnected all my clips manually. During the re-connect, I got a warning message on each of the clips that said that certain attributes had changed - the reel #, the rate (is that the frame rate, data rate, or what?) and the media in/out points. I told it to continue on each clip. But once reconnected, the in and out points on most - if not all - of the clips has slipped about 3 frames.
In the words of a co-worker - this is a big monkey on my back!
I'm really baffled here.
Tim
Dual 2.0ghz G-5 Mac OS X (10.4.4) FCS 5.1.2

Importer and AEGP

Similar Messages

Maybe you are looking for