Importer Error issues

I am in the middle of a project, I adjusted a Photoshop image and saved the file. When I went back to the PPro timeline all of the graphics that I was just using are now offline. When I tried to relink them I got and Error Message, The importer reported a generic error. I have tried everything I can think of including rebooting the program. I can "fix" the problem by reloading the files as new elements but then I will have to relink the entire timeline. What does this error mean and how do I correct it?

Hi xxdolifacexx,
Welcome to the Apple Discussions
m=audio 50831 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1154783225
m=video 50829 RTP/AVP 126 34
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 50832 VIDEO 50830
I have bolded the port numbers as they have changed to none iChat ports from the earlier repeats in the log.
This suggests two device a (A modem and a router) both doing NAT
Can you tell us how your LAN is set up please ?
10:24 PM Saturday; June 9, 2007

Similar Messages

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

Import Error with Pages

I have been working on my college application essay for a while now, and I've had it saved as a Word Document on my flash drive. Today, I tried to open the file and it said: Import Error: file format invalid. My flash drive and computer both work completely fine; I have other word files on my flash drive that I can open and use as normal. I've tried opening the file on both my brother and mom's MacBook Pros and I'm receiving the same message. I tried it on our HP computer as well, and when I open the file I'm getting this weird encoding message. (Sorry, I'm not much of a tech guru and can't use any fancy terms). I think the file might be damaged, but I don't know how that would've happened. I'm sorry if this isn't enough information, but this is everything I know and have tried. If anybody knows what's wrong and has any solutions (laymen's terms are preferred, please), I would be very grateful! (Ironically enough, I was about to back up the file from when I last saved it...)

After having the same issue, I found your post and thought I'd share my solution for your future reference and others. This little tid bit helps when the pages document corrupts and we receive that friendly "Import Error The file format is invalid." message.
Rename the file from "My important assignment.pages" to "My important assignment.zip" and tell the message you really do want to use .zip.
-- Double-click the file.
-- Open the "My important assignment" folder, and open "QuickLook" folder.
-- Double-click the "Preview.pdf"
-- Copy the text and paste into a new Pages document.
These steps help you to recover your page file info.
Good Luck

"Import Error" at report output.

Hi All,
I need help for a problem that I am frequently encountering.
After I execute a report, an information dialog is thrown on the screen which says:
"Import Error: No result found for key RU 0047621000029"
After pressing the tick button on the dialog, the same dialog pops up again, but with the number on it incremented once. This goes on till the RU0029 in the message becomes RU0119. (In effect, I have to press the tick button nearly 90 times). After all this, the output comes.
This has come so far for 2 reports. The common elements in both the reports so far is only an e-mail code and a selection-screen.
Ravi.

Hi,
Check whether contents in below links helps you to resolve the issue.
Link1
Link2
Thanks,
Raghavendra

Import Error The document is encrypted and can't be opened.i am able to open the file on my windows computer at work. there is no password needed.

I am unable to open an xls file. I get the message: Import Error The document is encrypted and can’t be opened.
I am able to open the file on my windows computer at work. there is no password needed.

See note 2 in Troubleshooting issues with iTunes for Windows updates for starters...
tt2

Payroll Journal Import Error EF04

Hi,
we are working in oracle applications 11i (11.5.0) TEST Instance.
As monthly operations the payroll personnel upload the salaries journal to Gl Interface with oracle web adi. We have oracle hrms full install.
We are trying to setup and use the direct payroll gl interface. The following steps are done so far:
1. Cost Allocation Flexfield is setup and points to the same value sets as in the Accounting Key Flexfield.
2. KFF qualifiers NOW are all enabled for all segments.
3. 5 Costing accounts for 5 elements are entered directly to an employee at employee assignment element entry level.
4. GL map to costing segments is done and although the employee is paid in foreign currency, his payroll is assigned to the functional set of book.
5. costing is run
6. cost break down report for costing run and only 2 lines are there! this is my first issue
7. transfer to GL is requested .
8. On the attempt to import the journals from payroll the request completes with warning And the two line have error code EF04
The GL super user have checked the 5 accounts and they are valid and their combinations exist in the system.
What do we need to check?
Thanks ...

Please review these docs and see if it helps.
Journal Import Error with Status Code EF04 [ID 235029.1]
Journal Import fails with EF04 error but security rule violation for new code combinations [ID 953109.1
Journal Import - Record With Two Errors Ef04 And Em30 - Em30 Code Is Incorrect [ID 1175769.1]
Receiving EF04 Error when Consolidation Run Option is Set to Run Journal Import [ID 150841.1]
Doing a Journal Import Encounters EF04 Invalid Accounting Flexfields [ID 107896.1]
EF04 error in GLLEZL incorrect, as code combination gets created [ID 368198.1
Errors Caused Because of Misclassified Accounts [ID 231948.1]
How to Use the Journal Import Correction Screen [ID 1056801.6]
Thanks,
Hussein

ODI - Import & Export issue

Hi
I am using ODI in two environments (Development & Test, both are in different servers).
In Development, i have Master repository with Internal ID = 0 & Work repository with Internal ID =1
In Test environment, i have Master repository with Internal ID = 0 & Work repository with Internal ID =1
I tried to Export the Project & Models from Development, it was successfully completed. I placed those files in Test environment path.
I have succesfully imported the Models in the ODI Test environment. But, when i tried to Import Project, i faced the below error
XML Import Error:
com.sunopsis.core.m: This import action has been cancelled because it could damage your repository (problem with the identifier sequences)
Can anyone help me what actions need to be taken to Import the Project without any issues in detail with the steps?
Thanks
Dhamu

Hi Dhamu,
Its a pure ID clash, since ur DEV and TEST repository ID are same, its should be different across environment , say DEV Master-0, Work-1 and TEST Master-2, Work-3 something like that.
You need to flush the TEST repositories and create a new repositories with UNIQUE IDs.
Have a look,
Migrate ODI project - import forbidden
Thanks,
Guru

IBooks Author / iTunes Producer Import Error

Looking for some help....
I have now attempted 9 different imports of my iBook Textbook created with iBooks Author - all ended in Import Error.   I have scoured the forums and took some community members' advice to:
Change all my video formats to iPhone / iPod 3gs .m4v instead of iPad .m4v (even though the documentation says that iPad .m4v should work)
Made sure there is a preview version of the iBook
Made sure all the Metadata is filled out
The ITMSP package validates successfully in Producer and gives me a green check mark on upload. After watching the package status it goes from Uploading > Uploaded > Internal Processing > to Import Error ever single time.   This is beyond frustrating since there is no error log for me to review to have ANY idea what the error is. Please advise!
This is going on over a week now of struggling with this and an entire week of work waisted.   I was told it will take about 10 days for the book to be reviewed to get placed in iTunes - BUT I CAN'T EVEN GET IT SUBMITTED!
Please help!

I struggled with the same issue for a couple of days earlier this week. My issue was definately related to vido, but not necessarily the format of the videos. It was related to 2 things:
1. We had adjusted the Poster frame from the default to a selectable frame.
2. We had adjusted the start/stop of the video
I deleted the videos that had either of these settings changed and added them back into the book without any adjustments and the Import worked. Unfortuantely, this took me 2 straight days of work to figure out since the error message doesn't tell you anything.
Good luck.

ITunes producer import error

I have completed my first iBook and wanted to publish...which fails of course. Everything works fine through the whole iTunes Producer thing until it says "Import error" in the package status. When I go to the contact us at iTunes Connect and try to get in contact with apple it says that my Apple-ID is wrong, it has to be a numeric identifier.
Is there some file in the system that states WHAT is wrong with the book? Or is there a way to actually get in contact with someone at Apple? *frustrated*

I struggled with the same issue for a couple of days earlier this week. My issue was definately related to vido, but not necessarily the format of the videos. It was related to 2 things:
1. We had adjusted the Poster frame from the default to a selectable frame.
2. We had adjusted the start/stop of the video
I deleted the videos that had either of these settings changed and added them back into the book without any adjustments and the Import worked. Unfortuantely, this took me 2 straight days of work to figure out since the error message doesn't tell you anything.
Good luck.

What is "Import Error"?

My issue is exactly like this story:
http://www.zdnet.com/blog/government/itunes-publisher-inexplicably-fails-to-publ ish-an-ibook-now-what/9027
Validation success, deliver success -> nothing happened, nothing to manage -> Status is "Import Error", no error messages to know what to do.
What should I do? I have been trying (and waiting) for many times, looking for any possible suggestions to try.
I am using iBooks Author to generate iBooks format, to publish as free book.

I found the guilty greek letter ( ) eta, introduced into my eBook using the Character Viewer of Mac OS X (in the Language & Text System Preference Panel) causing the 'import error' - which actually appeared as typsetting error in the preview of the eBook on my iPad.
Before knowing that, my approach was to continuously delete section by section, submit the truncated eBook (of course from within iBA, pressing the publish button, as advised by iBookstore Support), wait for the 'import error' by using the Lookup Status... in iTP, undo the delete section in iBA, delete the next section and start over again in order to get a quicker feedback. After submitting 17 versions, it was not the movies, it was not the template, nor the galleries and it was not any of the figures but it was the only letter which I then typsetted using the LaTeX markup provided by the 'insert equation' in iBook Author 2.0.

OVM 3.0.3 importing templates issue

We are doing some testing with the JD Edwards EnterpriseOne environment and Oracle provides templates to use for Oracle VM. The instructions are a bit confusing but I am stuck at trying to import these templates.
Here are the templates I have hosted on a web server so I can import them into OVM.
http://<server>/templates2/E1_EL5U5_X86_64_PVM_10GB.tar.bz2 --> This is the only one I can import successfully. When completed it shows a system.img file and I can actually setup a VM and it boots up fine. (Oracle Linux 5 OS)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.0 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.1 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.2 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.3 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.4 (2.0 GB)
http://<server>/templates2/E1_ENT_898.4.1_X86_64.tar.bz2 (2.0 GB)
http://<server>/templates2/E1_HTML_898.4.1_WLS_X86_64.tar.bz2 (700 MB)
All the other templates I get an error when it is unpacking the template. The error reads
"Server error message: Template import error: Cannot find disk file: system.img
on server "44:45:4c:4c:52:00:10:48:80:51:ca:c0:4f:42:46:31" associated with object "cfgFile_0004fb000014000024d7f889441e1672""
Why is it looking for this system.img file? These other templates contain *.img files they just are not called system.img (ex E1_HTML.img, ...)
I should note I am using local storage for my repository (1 TB drive) but I haven't had any issues with that so far.
Thanks
Troy

user5933938 wrote:
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.0 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.1 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.2 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.3 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.4 (2.0 GB)
You need to combine all these files into a single .tar.gz file first -- follow the README on E-Delivery for the template to recombine and unpack the template. Unfortunately, OVM3 can't do the recombination for you.

Lightroom 3.5 Import Errors using Synology NAS on Macbook

Hi all,
I've been trying out Lighroom 3.5 and I love it, with one exception....
When importing my archive (which is stored on a Synology Diskstation DS211j, accessed via an Airport Extreme), I get multiple import errors (around 5% of the total files), saying files are unreadable, unrecognisable etc. Some of the previews are also corrupt. I also get the "Server connection interupted" dialog in OS X Lion too, during the import. After Synchronizing the folder, it successfully imports more of the files yet still with a few errors. After the third or forth successive Sync, the operation is successful, with all files imported.
Now, this would point to a problem with my network connection or my NAS or its drives, however, this only happens with Lightroom. The files are not corrupt as they are imported sucessfully eventually. I work with the files outside of Lightroom all the time, and also stream my iTunes library sucessfully from the same drive, with no problems.
I have imported the same archive into Aperture, and encountered not a single read error or "Server connection interupted" dialog box.
Any ideas what is going on here?
Thanks,
John
MacBook Pro, Intel Core i7, 8GB RAM
OS X Lion 10.7.2

I am having the same problem with my iPad and ios5 since I switched I have had the same issue. I am a wedding photographer so I transfer about 2000 raw images at a time. Also, is there a way to see a log of the old import problems. Once I close out the error window I can't seem to find a way to see what exact files it had problems with unless they haven't been imported to the catalog at all ever and I just do a reimport and skip duplicates. Sometimes it takes upwards of 5 times for those problematic files to be imported into LR just fine.

Apex 4.0 import error - integrity constraint (APEX_040000.WWV_FLOWS_FK)

I have a new Oracle Express 10G instance with Application Express 4.0 installed on it. I am trying to import an existing application that has been exported using Application Express. I get this error. How do I fix this?
SQL> connect apex_040000/xxxxxxxxx
Connected.
SQL> show user
USER is "APEX_040000"
SQL> @C:\apex_misc\f41362_app_export_092010.sql
APPLICATION 41362 - REQ Tracker
Set Credentials...
Check Compatibility...
API Last Extended:20100513
Your Current Version:20100513
This import is compatible with version: 20100513
COMPATIBLE (You should be able to run this import without issues.)
Set Application ID...
begin
ERROR at line 1:
ORA-02291: integrity constraint (APEX_040000.WWV_FLOWS_FK) violated - parent
key not found
ORA-06512: at "APEX_040000.WWV_FLOW_API", line 621
ORA-06512: at line 3
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Produ
ction

Hi,
as you say your Apex instance is new - does the workspace you exported the application from exist on your new apex instance? Probably not. You could try to set the appropriate one using the API like this:
exec wwv_flow_api.set_security_group_id(p_security_group_id => apex_util.find_security_group_id(p_workspace => 'XYZ'));This still requires that you already have created the workspace.
Is there a reason why you don't import the application with the workspace import?
-Udo

Import error: ORA-00001:unique constraint (FLOWS_030100.WWV_FLOW_FLOW_PK)

Hi community,
I got an awful application import error.
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (FLOWS_030100.WWV_FLOW_FLOW_PK) violated &lt;pre&gt;--application/create_application &amp;lt;br&amp;gt; &amp;lt;br&amp;gt;begin &amp;lt;br&amp;gt; &amp;lt;br&amp;gt;wwv_flow_api.create_flow( &amp;lt;br&amp;gt; p_id =&amp;gt; 381, &amp;lt;br&amp;gt; p_display_id=&amp;gt; 381, &amp;lt;br&amp
Error installing application.What did I do?
Developed some in my test environment (APP ID 381) and made a normal export like 100 times before. When I tried to import that application in APP ID 380 the error occurred.
More information:
Both applications are in the same workspace.
APEX 3.1.2
Oracle XE
I tried a bit around:
Import in another workspace > same error
Restart OAS try to import> same error
Deletion of APP 380 and the try to import > same error
Import of an older version > successfully no errors
Try to make a new export of APP ID 381 > same error on import
Don't want to delete app 381! :O
Seems like something inside of the application/export is wrong.

Hi Scott,
the query returns
select grantee from dba_role_privs where granted_role='APEX_ADMINISTRATOR_ROLE';
GRANTEE
SYSI tried to install the export in another apex database environment. New error occurred.
ORA-20001: GET_BLOCK Error.
ORA-20001: Execution of the statement was unsuccessful.
ORA-02291: integrity constraint
(FLOWS_030100.WWV_FLOW_SEC_SCHEMES_FK) violated - parent key not found <pre>begin
--application/shared_components/security/authorization/t_users
wwv_flow_api.create_security_scheme( p_id =&gt; 18109134549712168 + wwv_flow_api.g_id_offset, p_flow_id =&gt;
wwv_flow.g_flow_id, p_name=&gt;'T_USERS', p_scheme_type=&gt;'EXISTS', p_scheme=&gt;'select cI looked in the export file for the error part and found some interesting code. See:
prompt ...authorization schemes
begin
--application/shared_components/security/authorization/t_users
wwv_flow_api.create_security_scheme(
p_id => 18109134549712168 + wwv_flow_api.g_id_offset,
p_flow_id => wwv_flow.g_flow_id,
p_name=>'T_USERS',
p_scheme_type=>'EXISTS',
p_scheme=>'select count(*) from v_mze_appl '||chr(10)||
'where NAME like UPPER(:P101_USERNAME)'||chr(10)||
'and ROLE IN (''APEX_MZE_ADMIN'',''APEX_MZE_USERS'')'||chr(10)||
p_caching=>'BY_USER_BY_PAGE_VIEW',
p_error_message=>'Sie haben keine Berechtigungen für diese Seite');
--application/shared_components/security/authorization/t_auswertung
wwv_flow_api.create_security_scheme(
p_id => 42071873141249964 + wwv_flow_api.g_id_offset,
p_flow_id => wwv_flow.g_flow_id,
p_name=>'T_AUSWERTUNG',
p_scheme_type=>'EXISTS',
p_scheme=>'select count(*) from v_mze_appl '||chr(10)||
'where NAME like UPPER(:P101_USERNAME)'||chr(10)||
'and ROLE IN (''APEX_MZE_ADMIN'',''APEX_MZE_REPORT'')'||chr(10)||
p_caching=>'BY_USER_BY_PAGE_VIEW',
p_error_message=>'No rights for the page');
--application/shared_components/security/authorization/t_berechtigungen
wwv_flow_api.create_security_scheme(
p_id => 42072157819264447 + wwv_flow_api.g_id_offset,
p_flow_id => wwv_flow.g_flow_id,
p_name=>'T_BERECHTIGUNGEN',
p_scheme_type=>'EXISTS',
p_scheme=>'select count(*) from v_mze_appl '||chr(10)||
'where NAME like UPPER(:P101_USERNAME)'||chr(10)||
'and ROLE IN (''APEX_MZE_ADMIN'',''APEX_MZE_BERECHTIGUNGEN'')'||chr(10)||
p_caching=>'BY_USER_BY_PAGE_VIEW',
p_error_message=>'No rights for the page');
--application/shared_components/security/authorization/t_kategorien
wwv_flow_api.create_security_scheme(
p_id => 42072262321265732 + wwv_flow_api.g_id_offset,
p_flow_id => wwv_flow.g_flow_id,
p_name=>'T_KATEGORIEN',
p_scheme_type=>'EXISTS',
p_scheme=>'select count(*) from v_mze_appl '||chr(10)||
'where NAME like UPPER(:P101_USERNAME)'||chr(10)||
'and ROLE IN (''APEX_MZE_ADMIN'',''APEX_MZE_KATEGORIEN'')',
p_caching=>'BY_USER_BY_PAGE_VIEW',
p_error_message=>'No rights for the page');
end;
/Looks like the p_id for T_USERS is wrong. Exactly what the error tries to describe too. How could that happen and how can I solve that issue? I will try and save the t_users group again and will create a new export.
King regards,
Tobias
Edited by: Tobias Arnhold on Mar 2, 2009 8:23 AM

Importer Error issues

Similar Messages

Maybe you are looking for