Importing 10,000's lines of text error
I have several documents that have 10,000's of lines of data updated every month, but every time I import the data I get a problem. Every 6393 lines an extra blank line is inserted.
Is this a known error, and is there a patch to fix it?
I have tried importing the text into a .doc and .docx file and importing that, this didn't produce the error. However my pc crashed with my largest .docx file so isn't a work-around.
Well blow me over with a moderate gush of wind.
I just tried with a constructed text file (10,000 copies of Aidu's post above) and my trusty CS4. I get other 'magic numbers' -- first line 5,202, then line 10,403, then #15,604, and so on -- but indeed, blank lines DO come in at random positions!
The 'magic number' might not be the number of paragraphs (= lines, for plain text input), but of course also could be the total number of characters. Just so others can try: I got a Free Hard Return with every 513,778 characters of input.
It is very easy to spot: if you use repeated copies of the same text and make sure the text frame on each page contains an exact number of copies of the text, all you have to do is hold down the Page Down key until you suddenly see your text jump a line. And add a numbered list to your paragraphs for a rough line count.
AIDU Gothic wrote:
How do i go about reporting this error to Adobe to get a fix? As there's no point paying all this cash for a program to go searching every 112 pages (every 6393 lines) to delete a blank line.
I hope I'm wrong but I don't think they are going to send you a fix ... Even if this bug (it must be one!) is present in CS6 as well, it just might get fixed in a point update for that, but chances are high they are going to leave this one until a Friday afternoon, when all really important bugs are fixed or it's too much work to start with a complicated one so short before the week-end.
Similar Messages
-
Batch list import is picky about line terminations in the text file
After running into trouble trying to compose a batch list for import, I isolated the issue:
The text file that you attempt to import must have "carriage return" characters at the end of each line. It can have a "carriage return" and a "line feed", but it cannot have only a "line feed".
If you feed Final Cut a text file that does not meet this criteria, it will barf up this error message:
One or more items on the header line do not match valid Browser column headers.
Line terminators have been the cause of many a problem over the years! Typically, MSDOS/Windows systems tend to create text files that use a CR-LF combo. While Mac OS was typically just a CR. And UNIX systems have typically been just an LF. However, since Mac OS X is now a hybrid of older Mac ways, and UNIX ways, you can find mixed situations there. For example, the Mac OS X Text Edit program saves out files with just an LF, and thus can't be directly used to create batch lists for Final Cut.
So, you need to be careful what means you use to create batch list text files.
Hope this helps some poor soul some day!
-RickI am trying to export a batch list created in FCP 5.1 to someone with 6. I follow directions, export and save and then e-mail the file. When he tries to import it, he gets that message ("One or more items on the header line do not match valid Browser column headers"). But I have tried re-importing it from my desktop and have no problem. Is there a problem going with such simple data from 5.1 to 6? Is it possible that the e-mail transmission is corrupting the files?
Thanks for suggestions. -
Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
ThanksStep by step, how did you arrive at seeing this agreement?
-
Error when adding image in-line with text
When using some of my templates I have no problem in putting
a small graphic (a pdf icon) in-line with text. Yet with others the
insertion of the same small graphic forces a newline before and
after the graphic.
If the text and image is placed in an editable region of the
template, but not within a table cell all is ok.
If the text and image is place within a table cell within the
editable region the problem arises. I am sure there is something I
have specified incorrectly but cannot discover what it is.
An example of where it works fine is:
www.digitalfox.co.uk/parryassociates/products.htm
An example of where it doesn't work is:
www.bournemouthlittletheatre.co.uk/membership2.htm
I am using Dreamweaver 8 within Studio 8 and run under
Windows XP.
Can anyone help please?
Regards
Roger SansomHmm -
<style type="text/css">
<!--
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
@import url("nav-bar-top/nav-bar-top.css");
Is this the belt and bracers approach? 8)
Anyhow, your problem is in the very first line of one of
those (take your
pick) -
TD IMG {
DISPLAY: block
That causes images in table cells to behave as a block tag.
Block tags
force all adjacent content to the next line.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RogerLS" <[email protected]> wrote in
message
news:[email protected]...
> When using some of my templates I have no problem in
putting a small
> graphic (a
> pdf icon) in-line with text. Yet with others the
insertion of the same
> small
> graphic forces a newline before and after the graphic.
>
> If the text and image is placed in an editable region of
the template,
> but
> not within a table cell all is ok.
>
> If the text and image is place within a table cell
within the editable
> region
> the problem arises. I am sure there is something I have
specified
> incorrectly
> but cannot discover what it is.
>
> An example of where it works fine is:
> www.digitalfox.co.uk/parryassociates/products.htm
>
> An example of where it doesn't work is:
> www.bournemouthlittletheatre.co.uk/membership2.htm
>
> I am using Dreamweaver 8 within Studio 8 and run under
Windows XP.
>
> Can anyone help please?
>
> Regards
> Roger Sansom
>
>
> -
database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2 (description VARCHAR2(60),
3 langcode VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2 CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3 CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4 CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created. -
When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this?
Is it resizing as I import it or maybe a printer thing?It is rasterizing the PDF at the resolution you tell it to, unless it's an image only PDF - then the image will be opened as-is.
-
Smartforms: How to CC email & Include a few lines of Text in Body of email?
I have created a smartform and have it outputting PDf documents and sending then via e-mail and it all works great. Except u2026 now I would like to CC someone and also have a few lines of text in the e-mail. Does anyone have any ideas?
Here is my code:
IF p_mail = 'X'.
wa_ctrlop-device = 'MAIL'.
PERFORM mail_recipient_object.
PERFORM mail_sender_object.
PERFORM mail_appl_object CHANGING g_mail_app_obj.
ENDIF.
LOOP AT my_table.
CONCATENATE 'ECS' comp_year izhr_emp_comp_summary-emp_lname INTO wa_outopt-tdtitle separated by space.
CALL FUNCTION func_mod_name
EXPORTING
CONTROL_PARAMETERS = wa_ctrlop
MAIL_APPL_OBJ = g_mail_app_obj
MAIL_RECIPIENT = email_recipient
MAIL_SENDER = email_sender
OUTPUT_OPTIONS = wa_outopt
USER_SETTINGS = u2018Xu2019
IMPORTING
DOCUMENT_OUTPUT_INFO = document_output_info
JOB_OUTPUT_INFO = t_otfdata
TABLES
I_MYTABLE = imy_table
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
ENDLOOP.
Determines the Recipent of the E-Mail
FORM mail_recipient_object.
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
EXPORTING
ip_mailaddr = email_address "E-mail Addr:Input Screen
ip_type_id = 'U' "Internet Address
IMPORTING
ep_recipient_id = email_recipient "Recipient Obj Key
EXCEPTIONS
invalid_recipient = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e531(0u) WITH text-003. "Error E-Mailing
ENDIF.
ENDFORM. "mail_recipient_object.
*Sender of E-mail
FORM mail_sender_object.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
EXPORTING
ip_sender = sy-uname "User Logged in
IMPORTING
ep_sender_id = email_sender
EXCEPTIONS
invalid_sender = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e531(0u) WITH text-e15. "Error E-Mailing
ENDIF.
ENDFORM. "mail_sender_object.
*Creates Mail Application Object to E-Mail Smartform
FORM mail_appl_object CHANGING g_mail_app_obj.
SELECT SINGLE * FROM soud WHERE sapnam LIKE sy-uname AND deleted = ' '.
IF sy-subrc NE 0.
CALL FUNCTION 'SO_USER_AUTOMATIC_INSERT'
EXPORTING
sapname = sy-uname
EXCEPTIONS
no_insert = 1
sap_name_exist = 2
x_error = 3
sap_name_not_exist = 4
OTHERS = 5.
ENDIF.
CLEAR sofmfol_key.
sofmfol_key-type = 'FOL'.
sofmfol_key-year = soud-inbyr.
sofmfol_key-number = soud-inbno.
bor_key = sofmfol_key.
IF NOT bor_key IS INITIAL.
swc_create_object folder 'SOFMFOL' bor_key.
IF sy-subrc = 0.
swc_object_to_persistent folder g_mail_app_obj.
IF sy-subrc NE 0.
CLEAR g_mail_app_obj.
ENDIF.
ENDIF.
ELSE.
CLEAR g_mail_app_obj.
ENDIF.
ENDFORM. "mail_appl_object.Get rid of the smartform-based mail sending code if you can. That interface is quite old, simplistic, and inflexible (i.e., you can't do what you're asking). I would use class CL_BCS. It's especially much easier once you have developed a (custom) standard email wrapper class for sending various types of emails, including smartform-based PDF-attached emails. You can even go with HTML and dress-up your emails a bit.
-
CS5 - Text format for classic text error
will now have to re-edit every part.
Clearly you can get around this by other formats but fact is if you have a document that has negative spacing dont open it in CS5 cause you
This may have been in recent update.
Flash now resets them when you open the file to 0, if you notice or not.
when you have negative (-20) set in spacing, usually used when you have margins.
Classic Text Error
Flash CS5Here's a workaround.
FixTextIndent is a class with static methods that
provides a workaround for the Flash CS5 text formatting
bug. The Flash CS5 IDE will not remember the text
indent setting for either static or dynamic text fields.
We can set the indent in Actionscript for dynamic fields,
so to use this class, convert your fields to dynamic,
then set the left margin.
When you call FixTextIndent methods, they will set
the indent to the negative of the left margin.
Gary Weinfurther, 12/17/2010
package com.keysoft.util
import flash.display.DisplayObject;
import flash.display.DisplayObjectContainer;
import flash.text.TextField;
import flash.text.TextFormat;
public class FixTextIndent
Fixes the line indent of all dynamic text fields
in a given display object container so that
the indent is the negative of their left margin.
public static function FixContainer(container:DisplayObjectContainer):void
for(var i:int = container.numChildren - 1; i >= 0; --i)
var obj:DisplayObject = container.getChildAt(i);
if (obj is TextField)
FixTextField(obj as TextField);
Fixes the line indent of a dynamic text field
to the negative of its left margin
public static function FixTextField(tf:TextField):void
var format:TextFormat = tf.getTextFormat();
if (format.leftMargin != null && format.leftMargin > 0)
format.indent = -(format.leftMargin as Number);
tf.setTextFormat(format); -
I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?This is a duplicate thread - see here
-
How to create a view to display Multiple lines of Text using ABAP WebDynpro
Hi,
I need to create a static view page in ABAP WebDynpro that displays Static text data in multiple paragraphs. I tried to use textview, formatted text, text edit controls by binding the textcontrol to a text object that is created in so10, but the output I am getting is only one line and the character count is limited to 60 to 65 characters.
I would like to know which control needs to be used in ABAP Webdynpro to get multiple lines displayed with text formatting like Paragraph, Indenting and Size.....
Thanks for your time!
Madhavi.Find the sample codes:
data sapscript_lines type tlinetab.
data sapscript_lines1 type tlinetab.
data sapscript_tline type tline.
data sapscript_head type thead.
data text type string.
data formatted_text type ref to cl_wd_formatted_text.
call function 'DOCU_GET'
EXPORTING
id = 'TX'
langu = 'D' "Germany language
object = 'WDR_TEST_HELP_EXP1'
IMPORTING
head = sapscript_head
TABLES
line = sapscript_lines
EXCEPTIONS
no_docu_on_screen = 1
no_docu_self_def = 2
no_docu_temp = 3
ret_code = 4
others = 5.
if sy-subrc <> 0.
text = space.
endif.
formatted_text = cl_wd_formatted_text=>create_from_sapscript(
sapscript_head = sapscript_head
sapscript_lines = sapscript_lines
" set it into the context
if Not ( formatted_text is initial ).
wd_context->set_attribute(
name = 'FORMATTED'
value = formatted_text->m_xml_text ).
endif.
clear sapscript_head.
clear sapscript_lines.
*Get the text created by SO10
CALL FUNCTION 'READ_TEXT_INLINE'
EXPORTING
ID = 'ST'
INLINE_COUNT = 1
LANGUAGE = 'E' "English language
NAME = '85XX_FOOTER'
OBJECT = 'TEXT'
LOCAL_CAT = ' '
IMPORTING
HEADER = sapscript_head
TABLES
INLINES = sapscript_lines1
LINES = sapscript_lines
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
OTHERS = 7
formatted_text = cl_wd_formatted_text=>create_from_sapscript(
sapscript_head = sapscript_head
sapscript_lines = sapscript_lines
" set it into the context
if Not ( formatted_text is initial ).
wd_context->set_attribute(
name = 'FORMATTED1'
value = formatted_text->m_xml_text ).
endif. -
Line Item text to updated automatically with current month
In this trxn, we have to always set the Posting variant every month, in spro.(set up line item text).
spro->payroll india -> Reporting for Posting Payroll Results to Accounting->Activities in the AC System->Set Up Line Item Text.
1000 Salary for the month of June08
Whatever text, we give at ID 1000, it gets updated in the accounting entries. What we require, that can it be automated , based on the payroll area/period. I mean, if I give Novu201907, then the text should be u201CSal for the month of Novu201907u201D.
PC00_M99_CIPE - Execute run
Document Date
Posting variant SAP Standard variantHI,
a text change in general ledger line item will not be forwarded to spec. ledger automatically (as the change of a line item text triggers no posting to spec. ledger).
But as you know the document relationship from GL doc. to SL doc go to the corresponding SL doc. and change the text if this is really needed (don't understand why the line item text is that important).
Best regards, Christian -
I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John -
I have created a email in Fireworks and wanted to make a line of text a hyperlink that would take the viewer to a page on my website. I want to attach the final document to my email and sending it out.
1) design for no wider than 600px (otherwise it may not fit in email clients).
2) Slice up your newsletter design in segments for images and html areas with the slice tool.
3) add the <a href="http://www.yourwebsite.com">my website</a> link in one of the html areas.
4) export as generic html 4 code, and put the images in a separate folder.
5) upload all the images to your website's server in a folder (you cannot embed images in an email newsletter - they must link to externally hosted images).
6) change all the links in your html page to the ones that were loaded up on your server. For example, an image's source link would work out similar to this: <img src="http://www.yourwebsite.com/newsletter/image1.jpg" alt="alternate description of your image">
7) open the newsletter with working external images in Chrome or Firefox. Select the entire page content (ctrl-a), and copy it (ctrl-c).
8) create a new email in your mail client. Place the cursor in the body. Paste the newsletter (ctrl-v).
9) send your newsletter to hundreds of recipients, and get blacklisted by several email servers. Receive warning messages from your own hosting provider not to spam other users' email accounts.
10) realize this is too much of a hassle, and instead opt for a service such as MailChimp.
(The result in (9) depends on whether you sent out your newletter only to acquaintances, or not. But even then you might be warned off.)
Btw, many email clients turn off images in an email by default. You must provide the most important content as html, not as images. -
How to add the line item text in the Ledger line item report
Hi SAP Gurus,
I having one requirement from the user. He wants the line item text which we will enter in FB60/FB70/FB50 has to be shown in the Ledger line item report. Right now this field is not available. Is there any possible we can make this line item text in the ledger line item report i.e. FBL1N/FBL3N/FBL5N?
advance thanks for the help.
Regards,
Deva.Hi,
You can do the below to get this. (You can change the names of the function modules as per your wish/ organization naming convention):-
Step 1:-
Create function module Z_GET_SGTXT as below:-
Import:-
BELNR LIKE BKPF-BELNR
BUKRS LIKE BKPF-BUKRS
BUZEI LIKE BSEG-BUZEI
GJAHR LIKE BKPF-GJAHR
Export:-
PRCTR LIKE BSEG-SGTXT
FUNCTION Z_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(BELNR) LIKE BKPF-BELNR
*" VALUE(BUKRS) LIKE BKPF-BUKRS
*" VALUE(BUZEI) LIKE BSEG-BUZEI
*" VALUE(GJAHR) LIKE BKPF-GJAHR
*" EXPORTING
*" VALUE(SGTXT) LIKE BSEG-SGTXT
SELECT SINGLE SGTXT FROM BSEG INTO SGTXT WHERE GJAHR = GJAHR
AND BELNR = BELNR
AND BUKRS = BUKRS
AND BUZEI = BUZEI.
ENDFUNCTION.
Step 2:-
Then create the Function Modules as below:-
Z_LINE_ITEMS_GET_SGTXT (Copy of SAMPLE_INTERFACE_00001650)
FUNCTION Module Z_LINE_ITEMS_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*" EXPORTING
*" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
Initialize Output by using the following line
E_POSTAB = I_POSTAB.
E_POSTAB = I_POSTAB. "<-- important
CALL FUNCTION 'Z_GET_SGTXT'
EXPORTING
BELNR = I_POSTAB-BELNR
BUKRS = I_POSTAB-BUKRS
BUZEI = I_POSTAB-BUZEI
GJAHR = I_POSTAB-GJAHR
IMPORTING
SGTXT = E_POSTAB-SGTXT
EXCEPTIONS
OTHERS = 1.
ENDFUNCTION.
Step3:-
Transaction FIBF:-
Settings -> Products -> of a Customer
SGTXT Text in Line Item Display Active
Settings -> P/S Module -> of a Customer
00001650 SGTXT Z_LINE_ITEMS_GET_SGTXT
Step 4:-
Create the layout for FBL*N with display of the TEXT.
Regards,
Gaurav -
Urgent! How to display more than 1 line of text in SAPSCRIPT using tab
Hi, i would like to know how do i display all the text (which may consist of more than 1 line) that i have extracted using a READ_TEXT FM in my print program? Once the text has been extracted and displayed, i would like the proceeding lines of text (if there are more than 1 line) to begin at a certain margin (i have defined a paragraph format as 6.2cm in tab option).
Have a look at the part of the print program that has the READ_TEXT FM statements which is going to extract the text from the PR Document header:
LOOP AT ITAB.
CLEAR: PR_TXT, PR_TXT[].
L_NAME = ITAB-BANFN.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'B01'
LANGUAGE = SY-LANGU
NAME = L_NAME
OBJECT = 'EBANH'
ARCHIVE_HANDLE = 0
* LOCAL_CAT =
TABLES
LINES = PR_TXT
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
LOOP AT PR_TXT.
MOVE: ITAB-BANFN TO PTXT_TAB-BANFN,
SY-TABIX TO PTXT_TAB-POSNR,
PR_TXT-TDLINE TO PTXT_TAB-LINE.
APPEND PTXT_TAB.
ENDLOOP.
As for my SAPSCRIPT, i did the following:
* Purchase Request Header : &PTXT_TAB-LINE(C)&
I would like all of the proceeding lines of text to appear at the same margin as when the first line of &PTXT_TAB-LINE& started (which i have found out is 6.2cm, so i created a tab called HT for this)
Message was edited by: Bernard LohREPORT ZZZZANC9 .
tables mara.
data: i_mara like mara occurs 0 with header line.
select matnr from mara
up to 100 rows
into corresponding fields of table i_mara
where matnr ne space.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = 'ZZZZANC1'
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at i_mara.
mara-matnr = i_mara-matnr.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'MATERIAL'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Look through above code. Sapscript should contain a text element (/E control) as below
/E MATERIAL
&mara-matnr&
Maybe you are looking for
-
Consumption data in the material master
Dear All, Can anyone explain me about consumption data in the material master? 1. How the consumption datau2019s are automatically updated in the material master? 2. List of movement types, that creates consumption data in the material master
-
How can I copy and paste a pdf onto my Mavericks Clipboard. I only see word-wrapped text.
-
I dont know what i hit, but i cant fast forward or rewind by holding the next or back button. I used to be able to fast forward to any part of the song, but now it just skips to the the next song. I tried to reset the settings and still doesnt work.
-
Hi Can you please let me know how can we build this activity? 1. Create a general hierarchy (transaction MCK1): do not add data to this hierarchy as it is only used as a container to pass data to BW. 2. Generate a DataSource hierarchy (transaction B
-
Best setting for imported audio?
Apologies in advance if this is an obvious question... I'm a 98-pound FCP weakling.... A local dub house converted some old analog video for us. They delivered the files in muxed MPEG2 format, which seems strange... but even odder, the audio track ap