Importing 16:9 problem

Hi - new to this forum so please don't flame if I have missed the answer to this question.
I have some anamorphic DV shot on a canon xm2 Edited in final cut, and added some graphics in motion. All fine. BUT when I import it into DVDSP and have my display settings to 16:9 - it squashes it so it looks like a distorted 2.35:1 type of thing. The only way to get it to display correctly is to set it to 4:3. But it identifies the imported asset as 16:9
Please help, have been sitting here for 4hours trying to understand where I am going wrong
Thanks

Hi:
Are you importing the QT file into DVDSP or did you encode it to MPEG2?
If you play the source file (QT or MPEG2) can you see any letterboxing? Just trying to find out if you made some mistake in the exporting.
If your imported clips are real 16:9 anamorphic ones, you must set the Display Mode : 16:9 letterbox and your Simulator to play 16:9. That's all you need to do in DVDSP. If that way it doesn't play fine, you must probably have some problem in the source file.
Hope that helps !
  Alberto

Similar Messages

  • I have my iTunes music folder stored on an external hard drive.  I recently purchased a new Mac.  After attaching the external hard drive, all the songs imported without any problem except my Playlists.  Any clue about where they are or how to revive them

    I have my iTunes music folder stored on an external hard drive.  I recently purchases a new Mac.  After attaching the external hard drive, all songs imported without a problem except my playlists.  Any clue about where they are or how to revive them for use on my new Mac?
    Thanks!

    Rysz wrote:
    To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
    Correct.
    After that just select the new folder location in iTunes> Advanced settings.
    Incorrect.
    Hold Option and launch iTunes.
    Select Choose library and select the iTunes folder.
    This will read the iTunes library.itl file in this folder and the library as it was previously will be opened.

  • Import from catalog problems

    Cannot import from catalog, LR quits and I get about 2 or 3 photos imported.
    Adobe was no help, they had no idea why.
    Have tried to "import from Cat" twice. Moving two different catalogs into my main desktop catalog. Both did not work.
    All three catalogs ( two from laptop and my main LR cat) work fine and I can import photos no problem.
    Would like to import all the changes of photos that I have made with these two catalogs that I did on my laptop. (Both cats are on an external hard drive).
    Thoughts anyone?
    I am having some issues with my video card. Screen right now is a bit pink. This would be the fourth video card I will need on this Mac Pro. Would this be the cause?
    Thanks.

    flyboys911 wrote:
    Do I need to export the laptop cats if thy are already on a separate hard drive?
    It might help. Exporting a catalog sometimes cures corruption in the original catalog. Try exporting into a new catalog and then importing the new one on your desktop.
    Never heard of the last thing you mentioned. Can you describe more?
    Lightroom has a preferences file, which sometimes gets corrupt and can cause all kinds of weard behaviour. You can delete (or rename away) the preferences file, and LR will build a fresh one when started. If you rename it, you will still have it if you decide you want it back.
    To rename the preferences file, rename the file
    "[username]/Library/Preferences/com.adobe.Lightroom3.plist"
    to something like
    "[username]/Library/Preferences/com.adobe.Lightroom3.plist.old"
    while LR is closed and restart LR.
    Beat

  • I can't import my photos from my digital camera (Sony) this problem is recent. I have imported photos without  problem a problem before.

    I can't import my photos from my digital camera (Sony) to my iPad, this problem is recent. I have imported photos without  problem a problem before. Is this problem due to the IOS 6 update? How can I fix it?

    I have the same problem and apple needs to fix this - but in the mean time you can manually select the vertical photos then "import - import selected" and you can get your verticals. We need a better fix. THIS IS A BUG!

  • Copying Ordering Address in Cart when importing from MDM: Problem

    Hi,
    There is are two enhancements in my scenario. My problem is in part 2 but to understand part 1 is required to mention.
    Part1: Configuring new partner function in SPRO for ECC ordering address vendor. As a result one separate section named "Ordering Address" got appeared in shopping cart screen.-->This one Is running fine
    Part 2:  When I will import MDM items by "Add to Shopping cart" at the time of creation of shopping cart, all fields including Ordering Address for the corresponding main vendor "Source of supply tab) will be populated automatically.
    For this I had to write the following code-logic in the SC_CHANGE method of BADI BBP_DOC_CHANGE_BADI.
    loop at it_item
    Reading the vendor which is in Source of supply screen
      CALL FUNCTION 'BBP_PD_CTR_GETDETAIL'
       EXPORTING
         i_object_id               = wa_item-ctr_hdr_number
         i_read_flags              = X
       TABLES
         e_partner                 = i_partner.
    now read i_partner with partner function (lets say 00000701) and then append this partner into ET_PARTNER table.
    I copied the partner_guid and p_guid of main vendor(lets say partner func = 00000019) to get reflect into the shopping cart "Ordering Address" tab While appending.
    I tested shopping cart getting populated with desire result and going into "ordered" state.
    But when I check the Purchase Order (which has just got generated as a result of shopping cart creation) I found  one hyperlink named  "SEVERAL" for "ODERING ADDRESS"  instead of any value.
    Also I checked the line item and saw not all line items has desired ordering address under "PARTNER" tab.
    Can any body help me out why this auto generated PO has problem with Ordering Address where as I can see the Shopping Cart got created properly with desired OA value for every line item.
    Is this due to Partner_GUI or P_GUID value which I am manipulating within BBP_DOC_CHANGE_BADI badi.
    Thanks
    Shibasis

    Hi Rosa,
    We have a similar requirement, and so it would be helpful if you elaborate the functionality of your final solutions.
    Cheers.

  • Photoshop cs4 and import to iphoto problem

    Hi to all,
    I would appreciate any help on this problem:
    I process a raw file through camera raw 5.1 in photoshop cs4 and then save it as a jpeg.
    I then try to import the jpeg file to iphoto, but iphoto says the file is unreadable and can't import it.
    In photoshop cs3 I never encountered this problem.
    The only way I can solve it is if i open the jpeg file in preview and save it again as jpeg. then i am able to import the new jpeg.
    Any ideas how to solve this?
    Thanks in advance for your help.

    process a raw file through camera raw 5.1 in photoshop cs4 and then save it as a jpeg.
    I then try to import the jpeg file to iphoto, but iphoto says the file is unreadable and can't import it.
    That's because you're saving it inside the iPhoto Library package and trying to import from there. You must save all RAW edited files to the desktop or outside of the iPhoto Library package. iPhoto will not import any file located inside it's library package.
    If you use CS4 to edit jpgs from within iPhoto the following may be of help to you:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Reg: importing/exporting repositories problem

    Hi all,
    I done all the exports from development in below vice versa:
    from topology:
    export master repository
    export topology
    export logical topology
    export execution environment
    from security
    export security settings
    from designer
    export work repository
    all are in .zip file formats only.
    i created 2 new schams in production db like impmaster for master repository and impwork for work repository
    then next
    i created one new login name example produtionmastr
    1)after that i imported master repository from import master repository winzard.
    2)it imported sucess fully i got all technologies,physical servers,physical schems,logical schemas,agents,contexts also.
    3)next i tried to import topology,logical topology and execution environment it takes time but nothing will be impoted. (my quwstion is what is the reason for we
    again import topology logical topology again,when the time import master repository only we are getting all the things in topology.then what is use for this options.)
    4)next think i created one work repository in topology manager with different id from development
    5)i created login name for work repository and i login to designer.
    6) i imported work repository from zip file using synonym insert mode. imported success.
    7)i changed all the physical paths in physical data servers. every thing fine.
    8)but i am getting problem with agent.previously i am working with odi 10.1.3.
    error is:
    oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 11050: session is not found in work repository WORKREP1.
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:260)
         at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartSession(InternalRemoteRuntimeAgentInvoker.java:171)
         at com.sunopsis.graphical.dialog.SnpsDialogExecution.runStartSession(SnpsDialogExecution.java:1972)
         at com.sunopsis.graphical.dialog.SnpsDialogExecution.doVariableExecuter(SnpsDialogExecution.java:1340)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.handleRefreshVariableAction(EditFrameSnpVar.java:818)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.access$6(EditFrameSnpVar.java:796)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpVar$1.actionPerformed(EditFrameSnpVar.java:346)
         at com.sunopsis.graphical.component.toolbar.OdiTextAreaToolbarAction.executeAction(OdiTextAreaToolbarAction.java:146)
         at com.sunopsis.graphical.component.toolbar.AbstractOdiToolbarAction.actionPerformed(AbstractOdiToolbarAction.java:203)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2319)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:274)
         at java.awt.Component.processMouseEvent(Component.java:6289)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
         at java.awt.Component.processEvent(Component.java:6054)
         at java.awt.Container.processEvent(Container.java:2042)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4483)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2479)
         at java.awt.EventQueue$1.run(EventQueue.java:601)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
         at java.awt.EventQueue$2.run(EventQueue.java:618)
         at java.awt.EventQueue$2.run(EventQueue.java:615)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:270)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:175)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:162)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    9)in 11g odi agent creation was totally different all configurations need to odiparams.bat.
    10)my doubt can i need to update all the repository names in odiparams.bat file
    11)or we can reuse the one agent to all repositories why because in 11g we are giving all reps names in odiparams.bat file.
    please share your solutions
    Regards,
    Surya

    3)next i tried to import topology,logical topology and execution environment it takes time but nothing will be imported. (my quwstion is what is the reason for we
    again import topology logical topology again,when the time import master repository only we are getting all the things in topology.then what is use for this options.)
    Ideally i would suggest when you are importing for the first time you can use the Import Master Repository wizard and from next time if any small changes has then import those individual ODI Object.
    You don't have to repeats those individual import once the Master Repository Import is successful.
    Reg Agent Error You can create an Agent manually in the your new Topology.
    I believe you have upgraded from 10g to 11g . In that case all your Master Rep url and credentials might change and so the old odiparams might not work .Please update odiparams accordingly.

  • Imported RFC with problem in converting to XML

    Hello,
    another nice issue:
    I have an aRFC with this import parameter from ABAP:
    data: p_data type tab512 occurs 0.
    Call function.......
    Tables
    DATA = p_data
    This is the XML source from the mapping test in Int.Rep.
    <?xml version="1.0" encoding="UTF-8"?>
    <ns:Z_BI_SEND_DATA_512 xmlns:ns="urn:sap-com:document:sap:rfc:functions">
      <SYSID_HOME>AAA</SYSID_HOME>
      <TARGETSYS>BBB</TARGETSYS>
      <DATA>
        <item>test1</item>
        <item>test2</item>
        <item>test3</item>
      </DATA>
    </ns:Z_BI_SEND_DATA_512>
    This is the payload from SXMB_MONI:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <rfc:Z_BI_SEND_DATA_512 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
      <SYSID_HOME>AAA</SYSID_HOME>
      <TARGETSYS>BBB</TARGETSYS>
    - <DATA>
    - <item>
      <WA>test1</WA>
      </item>
    - <item>
      <WA>test2</WA>
      </item>
    - <item>
      <WA>test3</WA>
      </item>
      </DATA>
      </rfc:Z_BI_SEND_DATA_512>
    Looks like there is a difference (imported RFC in mapping does not show the work area WA)(so: mapping requires
    <DATA>
        <item>test1</item>
    but RFC generates
    - <DATA>
    - <item>
      <WA>test1</WA>
    which hinders the mapping from moving the item lines into the destination file because in mapping the WA area cannot be linked as it is not recognized in mapping.
    Any ideas are welcome!
    Regards
    Dirk

    Hi everyone
    My problem is related to Dirk's one in that I am using an RFC to send XML data from CRM to XI.
    I am trying to send the following string:
    <TEST>GREG</TEST>
    However on XI the payload looks like this:
    <xml version="1.0" encoding="UTF-8"?>
    <rfc:_-MARS_-CPE_IMPORT_CRM_CATALOG xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
    <IV_CATALOG>&#60;TEST&#62;GREG&#60;/TEST&#62;</IV_CATALOG></rfc:_-MARS_-CPE_IMPORT_CRM_CATALOG>
    As you can see < is converted into &#60;
    Where and how do I specify that the content of the parameter must not be interpreted?
    Thanks
    Greg

  • Importing from Eudora problems - html messages being displayed in plain text and problems with attachments

    Hello,
    I hope you can help me. I've imported all my emails from Eudora into Outlook 2010 but I have a couple of problems.
    All emails that I've imported which had attachments with them have a notice on them saying the attachment has been blocked. I can always browse to the folder whereb my old attachments are stored, but this is still inconvenient.
    Secondly, all my messages that I've sent in the past (html) are being displayed in plain text, which is making them difficult to read because of all the html tags being displayed.
    Also with emails that I've sent in the past- there is no record of any attachments being sent with messages which I know had attachments with them.
    Any ideas? I've trawled google and had no luck except finding programs that cost $70 that can import everything properly.
    David

    David:
    I know this is a very old thread, but did you every figure out a way to fix the formatting of imported Eudora mail?
    I just "upgraded" from Eudora to Outlook 2010 ...
    and have 10 years worth of HTML formatted e-mail that now shows up as plain text with embedded html formatting ...
    apparently it is a long-running problem that has roots in the way Eudora formats messages ...
    Outlook and other e-mail clients all seems to have issues with importing and do not properly recognize HTML-formatted messages from Eudora ... very sad that I can no longer really "read" my old e-mail at this point ...  :-(
    See closing paragraphs here:   http://its.uiowa.edu/support/article/2800
    Same problem over at Mozilla going back 10+ years ... not sure if they fixed it..........
    https://bugzilla.mozilla.org/show_bug.cgi?id=3157

  • Importing word file - problem in style capturing

    Hi All,
    I have a problem in importing the wordfile into Indesign CS3.
    We have created all the Para & character styles in Indesign CS3.
    The same style was created in Word also, we have a set of guys to do the pre-editing the input wordfile which we got from client.
    We have applied all the character and para styles in Wordfile, which uses the same names in Indesign CS3.
    When we import the wordfile into the Indesign CS3 all the para & character shows "+" marks and the style was not applied.
    What will be the problem, why it is behaving like this, we have checked the "import options" while importing the word, but it fails.
    Is anyone have these type of problem.
    We need to know that how to solve this, since the reference part has lots of character style applied, we cannot clear the "+" manually in Indesign CS3 to solve.
    Kavya

    > So we like to open a topic reg. this to get solved.
    This is a user-to-user forum. We're all just users like you.
    From what I could tell from your post, Indesign is working as intended.
    There is no solution because there really is no problem.
    > Giving char style for bold and italics and special character will
    > won't solve this, after importing into the template we need to clear
    > the overrides that become manual one and we don't know what else has
    > changed in the content, this will leads to problems.
    Yes. Clearing overrides does clear all non-styled formatting, which is
    why I suggested using Find/Replace to find the good formatting before
    you clear the bad formatting. Specifically, you mentioned wanting to
    keep bold and italic. The other character-level formatting from Word
    that you will probably want to keep is:
    --Strikethrough
    --Underline
    --Superscript
    --Subscript
    --Small Caps
    --All Caps
    --Bold Ital
    --Bold
    --Ital
    There may be other character-level unstyled formatting you want to keep.
    This depends on what the author put into the file.
    If you're getting the same kind of files all the time, you can develop a
    routine for these Find/Replaces. You can save your Find/Replaces, use
    GREP, even string all the Find/Replaces together in a script. What you
    can't do is expect Indesign to know which unstyled formatting is "good"
    and which formatting is "bad". Only you know what you want to keep and
    what you want to throw away.
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • Importing Java class problem!

    Hello
    I have problem by Importing java class into form. When I select in Forms Builder from menu: Programs/Import Java Classes it returns error: PDE-UJI001 JVM not able to create!
    Can someone know what I must do to fix that problem?
    Thanks, Chrity

    It is a shame because it, probably, contains no special 1.5 new instruction at all.
    Maybe it would be possible to try replacing the current JDK/JRE of your <ORACLE_HOME>/jdk installation after a safe backup of course.
    You probably have a very little chance that it works, and it also won't be supported.
    Francois

  • IMPORT and EXPORT PROBLEM

    Hi All
    I have a problem.I need to export the data and then import it inot another database.I used imp and exp file but it is not exp and imp data but exp and imp database structure,triggers,procedure etc but not data
    Please tell me how should i proceed.
    Thanx
    Manoj

    When you export, it will list all of the table structures that you are exporting. You can limit some of the other information that it exports by setting parameters.
    I assume that the database you want to import into already has all of the table structures and grants.
    When you export, set the following parameters:
    GRANTS=N
    INDEXES=N
    CONSTRAINTS=N
    TRIGGERS=N
    The default for exporting data is Y so you don't need to include that.
    It will still export the table structures but you can ignore them on import.
    Then on import, set the following parameters:
    GRANTS=N
    INDEXES=N
    CONSTRAINTS=N
    IGNORE=Y
    The default for importing data is Y so you don't need to include that.
    That will import data and not import table structures unless there is a new table in the database that you export from.
    Another option that might help is to export by using a table list. This will eliminate the issue of export procedures.

  • Aperture import and desktop problem

    My Aperture main screen had changed and can not be fully used, as some pictures are not vissible in the browser view. As well the picture if shown in full screen in the main screen is not shown properly - 1/4 on the right side is missing.
    Today I realized, that the missing 1/4 of the working desk is impacting the import - the menu to put create new project and all the data of the picture is missing - so totally impossible to import new pictures.
    Does any one know how to adjust the desk in Aperture and show/hide the importing dialogues?
    help appreciated.

    Hello Milo,
    a similar problem occured recently, see this discussion.
    The problem could be solved by removing the preferences file to the Desktop and restarting Aperture, for Aperture stores the layout of the main window in this file.
    The preferences file is ~/Library/Preferences/com.apple.Aperture.plist
    That file is in your User Library.
    Quit Aperture, if it is running,
    To reveal the hidden User Library in Lion, activate the Finder by clicking on the Desktop, then go to the main Finder menu at the top of the screen, and select the menu Go -> Go to Folder.
    in Lion now hold down the alt-or-option key, and your User Library will appear in the Drop down menu. Select it to open in Finder. (in other MacOS you can access your User Library by opening your Home Folder from the Finder Sidebar).
    Once your User Library is  revealed in the Finder, navigate to the sub folder "Preferences" and scroll down the long list, until you find
         com.apple.Aperture.plist
    move it to the desktop.
    Log off and log on again.
    restart Aperture and see, if the fix worked.
    And please, post back and tell us, if you were successful
    Regards
    Léonie

  • Problem in import profile - storage problem

    I just bought new iMac, with Solid State Drive 256GB and HDD of 2 TB.
    The problem is that I have to import my profile of old iMac where music, images, video etc. are about 800 GB... and import utility does not give the possibility to choose target drive for the storage of archives and libraries... it just propose as target the main disk (SSD) and says there is not enough space...
    Anyone could help? Is there a solution?
    Thanks for help
    Marco

    https://discussions.apple.com/message/18608474#18608474

  • Only import sound  - another problem the image flickering

    Hello
    My problem is that when I import AVI files into Encore, it's only sound that comes with - The video track is empty.
    If I play the same movie with Media Player does is both play sound and picture.
    What am I doing wrong?
    The first DVD I made, I could well do in Encore, but when I played it on my DVD player flickering image. - What should I change to fix this problem ?
    I can see the "Quality settings" the source is 720x480 29,97 fps, but the AVI i'm importing is 720x576 25 fps ?
    T

    steenmikkelsen2 wrote:
    Ok - I have imported from the camera to AVS Video editor via USB, then Adobe Promiere can't capture via USB, but need a FireWire connection, (1394)  mabye I shall buy a FireWire adapter sow I can capture direct to Premiere -
    is there one of you who can recommend FireWire adapter (1394) that I use with Premiere and my analog camcorder?
    Oh Dear - AVS uses a library called ffmpeg, which is largely based on reverse engineered commercial codecs and is not - ever - guaranteed to be DVD compliant in it's output.
    What looks like has happened to me is that the encore project appears to be NTSC (720x480) and I suspect the flickering issues are caused by changing frame rates in that dodgy conversion utility.
    Can you please confirm the following:
    1 - Project settings in Encore
    2 - Camera settings
    3 - Settings used in AVS - including codec used?
    Analogue to digital via FireWire capture can be done if you have a special box to do this.

  • Imported Slide Show Problems

    I imported a slide from Photoshop Elements 7.0 into Premiere Elements 7.0. I did get an error that .jpg files could not be imported into Premiere. Some .jpgs showed and some did not. Any suggestion?
    Also, text titles I added in Photoshop are very blurry in Premiere. Can someone help me understand why and how to correct?
    Thanks,
    Gary

    Steve,
    I did a batch processing of over 2000 jpgs in 7 slide shows to 1000x750 and this seemed to work better.
    I am still having text problems. The titles applied to each jpg in the slide shows are clear in Photoshop Elements 7 but are blurry but readable when imported into Premiere Elements 7.
    Further, I have blank slides that are black background with white text in each slide show. These are clear in Photoshop but blurry but readable when imported into Premiere Elements 7.
    I took a suggestion and imported a slide show into PE7 and then exported it to a DV AVI file. When I brought it back up and viewed it, the text titles on the jpgs and the white text on the black slides were still blurry but readable. I viewed the AVI in two separate programs, the pictures look OK but the text is not crisp and clear.
    Any help would be greatly appreciated.
    Gary

Maybe you are looking for

  • Viewing iPod Menu on TV

    I recently purchased a iPod Classic and l'm using the docking station for the new philips sound bar. I'm able to view video and photo slideshows via the TV out option, however l can't see the menu system or the album artwork on my tv. I think this is

  • I have music from old cassettes in Itunes - Track  problem

    My problem is, I have music from old cassettes that I transferred to computer.  Put into Itunes without track#s, but say the name of album song 1, album song 2, etc.   In the SONGS list it shows all songs in ORDER.  then when I click the same in ALBU

  • Windows 7 is truncating url that contains # id tag.

    I am using RH8 generated files.  In java code, I am calling Runtime.getRuntime().exec(command) where command = "rundll32 url.dll,FileProtocolHandler " + url.  The url is a file url (pointing to a local file on my computer) appended with #<id=2187>>ne

  • What is the relationship between them?

    What is the relationship between the following concepts ? Java perssitence entities Coherence caches Database tables Which one can best represents database tables ?

  • E72 adnormal "Memory full" error

    RE: E72 "Memory full" error with 10MB data reception by widget RE: Continuous "Memory full" error after all applications are closed Device: E72-1 HK versoin, software version:021.024 Phone Free Memory: 216MB Memory Card Free Memory: 3GB App: "Apple D