Importing a Hyper-V virtual machine into windows 8 hyper-v fails with a strange error

Here is the error what i am suffering from, it fails and i dont know what this error is all about
Saved State Errors
The following saved state errors were reported... the processor settings for virtual machine....
can some one help

Hi,
Could you offer more information about your error, such the original error message or screenshot, If meeting the Event 3080, you can refer the following related article for
the further troubleshooting:
Hyper-V Could Not Initialize - Could Not Create or Access Saved State File
http://blogs.technet.com/b/rmilne/archive/2014/01/15/hyper-v-could-not-initialize-could-not-create-or-access-saved-state-file.aspx
Hope
this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows 2008 R2 backup fails with event 521 error code 2155348001

Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/10/2014 11:28:52 PM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SHAQTUS.scdl.local
Description:
The backup operation that started at '‎2014‎-‎01‎-‎11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
Rick

Hi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8 USB recovery fails with CTOERROR.flg error

Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29

Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

WDS capture image on a Windows 2012 R2 server fails with a winload error

Hello,
I have been fighting with this problem for days now. I have to install
30 Win8.1 Pro PC's with WDS. The WDS service is running on a Win2012 R2
server. I added the Win 8.1 Pro boot and install images and created a capture image.
Now when I boot the reference computer I get a Boot Manager message saying that winload.exe is missing or corrupt. The original boot wim works
correctly.I removed and added the WDS role a couple of times, I tried the procedure with a 32 bit Win7 boot image, and that worked, But when I added the capture image created from the original Win8.1 boot.wim, that spoiled both capture images. I tried
the same thing with a Win2012 R2 Standard server after removing and adding the WDS role again, but the capture image generated the same error as above. .I see that since about mid-April many people has the same problem.Different solutions are suggested, but
none of them worked for me. One of them is to mount and unmount the capture image, that didn't help for me.
Any help is appreciated.
Thanks
Gabor

Do I understand correctly that if you deploy original wim file to your testPC1 it works all right, but if you deploy an image that you captured on buildPC to testPC1 then you get the winload.exe error ?
Are you formatting (deleting all the partitions) on testPC1 during the
deployment of captured image ? Can you check and confirm if the HDD seting for AHCI or IDE (yes, its still around) is the same option on both stations?

Build Novell 6 on virtual machine using windows 2008 r2?

Hello.It will work this configuration?Somebody tried this?i have a novell 6 server using a IBM machine and i bought a new DELL machine with windows 2008 R2 enterprise.I want to put Novell server on a virtual machine build with 2008 R2.Will work novell on virtual machine?or i will have problem with workstation to "see" the TREE?i heard that this could be a problem, that putting a novell on a virtual machine, workstations won't see the built TREE.I also have a problem with my actual Novell:when i puuted it with IP, it didn't work, so i let it with IPX/SPX.But i have windows 7 workstation and i cannot connect them to my NOVELL network.Please help me.

On 30/11/2011 07:56, shtou wrote:
> Hello.It will work this configuration?Somebody tried this?i have a
> novell 6 server using a IBM machine and i bought a new DELL machine with
> windows 2008 R2 enterprise.I want to put Novell server on a virtual
> machine build with 2008 R2.Will work novell on virtual machine?or i will
> have problem with workstation to "see" the TREE?i heard that this could
> be a problem, that putting a novell on a virtual machine, workstations
> won't see the built TREE.I also have a problem with my actual
> Novell:when i puuted it with IP, it didn't work, so i let it with
> IPX/SPX.But i have windows 7 workstation and i cannot connect them to my
> NOVELL network.Please help me.
By "Novell 6" do you perhaps mean NetWare 6 (Novell is the company not
the product)? Does "6" imply 6.0 or 6.5? The latter is more suited to
being virtualised.
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

Imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?

imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?

I am assuming you had iLife 09 on the old computer - when you moved everything over, that came along with it.
I also have older versions of iLife (on install disks) and just recently got a new 2012 Macbook Pro. I noticed that iMovie 11, iPhoto and Garageband (I think) are listed in my Mac App Store Purchases with a notation to "accept". So you might want to check MAS to see if the apps are sitting there.
Now, I have chosen not to accept them for now for two reasons: I have iLife 11 on a disk and prefer that rather than having it tied to MAS/Apple ID and as long as I have my disk version installed, I also still have iDVD which I use a lot. I'm not sure if "accepting" those three from MAS would wipe out my iLife 11 installs including iDVD (which would be unacceptable for me). So, since I already have the latest version, I've opted to ignore the "accept" and, in fact, will leave it like that - if I ever sell this machine, the buyer can then accept them if they want with their own Apple ID. So before accepting the apps (if they are listed in MAS), you might want to check to make sure that your iLife install isn't wiped out - that is, if you have iDVD and want to keep it.

Import mail.app mails (10.5) into Windows Mail (Vista)

Hello,
I switched to a VAIO PC laptop and I wish to import mail.app mails (10.5) into Windows Mail on Vista. And of course, I need my adresses, too, although they are not as import.
Windows Mail says that it mainly imports emails from Outlook, Outlook Express, Exchange and Windows Mail 7. So, how do I get my mails? There must be a way!
Please help, I have no ideas,
Avee

I just want to say THANK YOU, because this fixed my problems for me, too!
Apple Support site ... well, not very supportive. Their answer didn't work.
And even calling them provided no answer - so, again -
THANK YOU.
As soon as I reloaded my old accounts, all my old e-mails that I'm clinging to popped up! Thankfully - because like an idiot, I didn't back anything up!

Installing FM8 on windows 8- how to deal with a 1603 error ?

Hi all
i have run FM8 on Windows 7 for a long time, but upgraded to Win 8.
I have installed CS4, but now that I am attempting to install FM8, i have a problem. The install goes almost all the way to the end; the installer mentions something about updating registry entries, but this goes by in a flash. Then the install rolls everything back. It says there is a 1603 error.
Win compatibility modes don't seem to help, nor does installing from hard disk. I have switched off all the startup items, changed permissions on spool/drivers, but i still get the same error.
can anyone help ?
many thanks in advance
david

Hi jeff
i wasn't quite sure what you meant by a virtual xp drive, but i guess you mean something like this :
http://www.intowindows.com/xp-mode-in-windows-8/
that is setting up XP in a virtual machine in windows 8, then installing framemaker there ?
I suspect that is too technical for me. I have used FM8 on several Win 7 machines, so it is surprising it doesn't install on a Win8 machine. FM8 doesn't install in the normal XP or win7 compatibility mode in Win8.
I am also aware that FM11 is out. However, i have FM8, i have got lots of files which work perfectly for my low level use of FM8, and it would be nice to use them without having to buy the newest software.
thanks very much for your help.
cheers
david

Import (imp) failing with IMP-00010 error

Hi Experts,
I am doing import to Windows from an export dump that was taken on Solaris 10. But the import is failing with the following error.
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
I checked the source and target oracle versions and NLS_LANG parameter.
In both the databases NLS_LANG parameter is set to AMERICAN only. But the oracle versions are different
Source
OS : Solaris 10
Oracle version : *11.2.0.2*
Export dump : exp_CAAU2.dmp.gz (Export taken by zipping)
Target
OS : Windows server 2003
Oracle Version : *10.2.0.2.0*
While importing into windows env, it is failing..
Please let me know the reason why the import is failing?
Can i upgrade the target oracle version to 11.2.0.2 to succeed the import?

Hi,
The IMP indicates this this error is coming from the old imp. This dump file could be from the expdp utility, which would require you to use the impdp utility.
Source
OS : Solaris 10
Oracle version : 11.2.0.2
Export dump : exp_CAAU2.dmp.gz (Export taken by zipping)
Target
OS : Windows server 2003
Oracle Version : 10.2.0.2.0
While importing into windows env, it is failing..
What really matters here is the compatibility level. If your source and target compatibility levels are the same, then with Data Pump, the dumpfile created on the source, would work on the target. If the compatibility levels are different, then use expdp with the version parameter set to the compatibility level of the target.
Please let me know the reason why the import is failing?Check the suggestions above first.
Can i upgrade the target oracle version to 11.2.0.2 to succeed the import?It could help, but first check to see if you are using the right utility and then check the compatibility versions.
Dean

Windows 7 Backup is Failing with error 0x81000101

Hello,
My windows 7 backup is failing with the following message "Error Code: 0x81000101". I searched the internet but didn't find any good solution.
Can you please tell me what should I do?

If none of the above worked read this next
Did your computer come with a Recovery Partition on the drive? (Check the computers documentation)
If it did, you cannot have any backup software or System Restore set to backup or monitor that drive.
Go to Control Panel.
Click on Classic View in the Task Pane.
Double click System.
Select Advanced System Settings in the Tasks Pane.
Click the System Protection Tab.
In the Available Disks section, make sure that the backup partition is not selected. If it is, remove the check mark.
After this is done or if this does not work, go to Start/All Programs/Accessories/System Tools and click on Disk Cleanup.
In the Options dialog, select 'Files from all users on this computer'. Click the C: system drive. When the scan is completed, click the 'More Options' Tab. In the 'System Restore and Shadow Copies' section, click the 'Cleanup' button. In the 'Are you sure......' popup, click Delete. Click OK.
Wait for the Disk Cleanup to complete.
Now, go back into Disk Cleanup and follow the same procedure for any other drives that appear in the drop down menu where you selected the C: drive the first time.
Exit everything and reboot the computer.
After the computer reboots, check System Restore again. If System Restore is still not working, go back into System Protection and turn off System Restore for all drives and reboot the computer again. This will delete all restore points on all drives.
After the reboot, go back and enable System Restore for the C: volume only. Create a new restore point for that drive.
Let me know the results.
MCSE, MCSA, MCDST
[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

Import Purchase orders failing with numeric/value error issue

Import Purchase orders failing with numeric/value error issue

Hi All,
Import Purchase Orders program is failing with PL/SQL Numeric or Value Error.
DECLARE
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 55
Kindly help me to get the issue fixed

How to install windows 7 32 bit virtual machine on windows 7 64 bit

Wondering what would be involved in installing windows 7 32 bit as a virtual machine on a windows 7 64 bit laptop, trying to continue to use software that only has 32 bit drivers to talk to specialized hardware before scrapping the hardware. Drivers
are not updateable due to the company no longer exist. Being forced to do this since I am using windows XP to currently do this and will have to stop using XP by 01Apr2014.
thanks for any help

If it's special hardware, your chances are small for it to work in a
virtual machine. Some USB devices might work, but Virtual PC can't see
the real hardware on the host.
Bob Comer Microsoft MVP -- Hyper-V

How to fully backup virtual machines in Windows Azure

For those of you like me using the 90-day trial package of Windows Azure for testing purpose before moving on to the cloud, I want to backup all virtual machines unless my account will be disabled if it reaches spending limit. Recently another account
has been disabled so all virtual machines I created are removed. I've heard of the approach used to export virtual machines.
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

Hi Thuan,
When you hit the spending limit on a trail subscription, or an MSDN subscription with monthly limits, while it looks like your VMs are removed, the VHDs for those VMs still exist in your storage account and you can create VMs from them again when you enable
your subscription again (convert to pay-as-you-go, or wait for the next billing cycle in the case of subscriptions with on-going monthly limits).
Because of that, it isn't necessary to back them up relevant to the spending limit being hit.
And note that backing them up outside of Azure would incur egress fees which would cause you to hit your spending limit more quickly.
While it can be simpler to configure everything from scratch from new VMs created in Azure, another approach would be to configure them on-premises in Hyper-V, then upload them as either disks (to use for a single VM in Azure) or as images (generalized with
sysprep to use as a base template for multiple VMs). That way you already have a backup of the VHD in the copy you have on-premises. And, since inbound traffic is free, you don't have the same issue of hitting your spending limit more quickly (there will be
some outbound when doing an upload, but very little in comparison to a download).
Thanks,
Craig

Cannot start virtual machine on Windows Server 2012

Hello,
I have a weird problem and have been unable to find a solution to it after two days of searching. I have Windows Server 2012 host on IBM x3500M2 machine. I set up a hyper-v platform (added the role, configured the storage and network) and created two virtual
machines. Now when I try to start either one of these VMs, using the Hyper-V manager, it throws this error:
"machine name" could not initialize
Could not initialize machine remoting system. Error: Element not found. (0x80070490).
Could not find a usable certificate. Error: Element not found. (0x80070490)
In the event log there is a similar error with the event IDs: 3040, 12460, 12500.
I tried clearing up the certificate from vmm/personal folder to recreate it again but to no avail. I found few articles regarding a similar problem on Windows Server 2008R2 but from what I can see this problem mainly occurs with SCVMM...

Hi,
Please restart your server or restart VMMS service to check the result.
In addition, I searched the internet and found that someone with the same issue has solved it by removing a
certificate from my Trusted Root Certificate Authorities container. The certificate is a self-signed cert generated by Remote Desktop Gateway service.
Hope it helps.
Regards,
Yan Li
Cataleya Li
TechNet Community Support

Importing a Hyper-V virtual machine into windows 8 hyper-v fails with a strange error

Similar Messages

Maybe you are looking for