Importing a layered photohop file into flash [CS3]

Hi there, new to the Forums here and for starters heres a
good challenge for you.
I have a .psd file with a background image and 3 layers above
this. The 3 layers have numberous layer styles and settings applied
to them.
See Image >>
I have tried importing this psd into flash by converting the
top 3 layers into movie clips (and selecting keep layers editable
in the settings) when importing. (Think I found this on a tutorial
from Computer Arts.)
While this does import the layers all the layers styles do
not seem to be displaying correctly as in the photoshop document.
I hope someone can give me a little guidance on this matter
as the resident flash guy in the media centre I work in wasnt able
to help!
The .psd file is below hosted on mediafire if anyone wants to
try it out.
http://www.mediafire.com/?sharekey=0dea5e48dea5bec541446e35a78dc463e04e75f6
e8ebb871
Many thanks
[email protected]

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Similar Messages

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Any way to import multi-layered Illustator file into Motion?

I have an Illustrator map of Europe and i would like to bring it into Motion.
I know that Motion can import Illustrator files as pdf but is there any way to import a multi-layered illustrator file into Motion. I just saw this web site regarding a Motion plug-in that claims to do just this:
http://www.macupdate.com/info.php/id/16298/layerlink

Without a dedicated plug or FxPlug, Motion has no inherent ability to parse Illustrator layers.
We just bust the layers out and save them as individual files. Or, of course, we use After Effects.
bogiesan

Importing Illustrator CS3 files into flash CS3 to tween

Hello,
I'm definitely not a flash pro so I would like some help!
I'm trying to animate a man in Flash CS3 who was drawn in
illustrator CS3.
I've imported all the layers but when I try to tween them
only the ones that have a single path tween correctly. Can you only
tween single path layers or am I being an idiot?
Many thanks and I look forward to your comments!

you can actually make illustrator drawings into symbols for
use in Flash CS3 while they're still in Ai. I would try that
approach first. There are some video tutorials on Adobe's site-
I've lost the link.
That takes it out of the multi-layer wackiness, and puts
everything together in nice packages.
Hopefully I'm not telling you something you already know X
/

Import QuickTime with Alpha channel into Flash CS3

Is it possible to import a QuickTime movie with alpha channel into an FLA and have the FLA recognize the Alpha channel? When I've done this, it just shows opaque black instead of an alpha channel. I need that black to be transparent so I can see the layers below the video layer.
Thanks in advance for any help.

I don't know the answer to your question.
Do you have a video player where you can verify that the alpha channel in the video is displaying as you expect?.... that is, the background is transparent?
I have used flv files with alpha and a NetStream vid player to overlay Flash video on a Web page.... but not directly in the timeline.:
http://www.mrfilmbiz.com/
the walkon... could have had other action (like Flash artwork) going on in the background... but that may not really be what you are looking for.
But lacking any other solutions, you could have your alpha channel vid file playing in one Flash file over the top of a second Flash file doing the artwork stuff.
Adninjastrator

How to import an Quarkxpress 5 file into Indesign CS3

Hello,
I am in trouble when trying to open with Indesign CS3 for windows a file created with Quarkxpress 5 for Mac. Do you have any hint? (file attached)
thanks for support

The Q2ID plugin is really nice as Bob suggested. If you go through there website they will convert your one document and post it for you to download, email you with the results and a discount code. Well worth the money and a very nice company to work with. I can't say enough nice things about their products.
If you have a newer version of Quark licensed I prefer use their Markztools plugin for Quark to backsave to 4. Seems to be a better conversion with InDesign's Quark import, though that could just be my impression.

Loading Captivate 3 files into Flash CS3

I've experienced and read about making sure that streaming
SWF you wish to unload in AS3 need to be stopped, otherwise the
audio that you may have playing in the continues to play even
though the SWF is no longer disaplyed. I even succussfully do this
with a file that has audio streaming on the main timeline. However,
I am working with some some SWF files created with Captivate 3
(exporting to flash version 9), and I cannot detemine how to stop
the audio from playing.
The audio in question is what Captivate adds - the mouse
clicks and keyboard clicks - to captures I create in a browser, or
any other application. You can suppress these, but I'd rather
figure out this dilemma than go to that side of things.
I'm assuming that the sound effects in the Captivate SWF file
are no on the main timeline, and so I cannot control the playback
of the timeline. Perhaps the sounds are not timeline oriented, but
instead are sound ojects, I don't know. If that were the case, I
wouldn't know what to do to target them from the parent SWF file
and stop them.
Has anybody experience this or similar issues?

Hi learning_still and welcome to our community
Unfortunately it's not possible to do this. The best you can
do would be to open each version of Captivate. In version 3, open
the project you wish to "convert" to version 1. Note the dimensions
of the project.
In version 1, create a new blank project of the same
dimensions.
Now from version 3, copy the first slide. Paste into version
1. Rinse and repeat until each slide has been copied and pasted. I
haven't tried this, but you may be able to select *all* slides and
paste. That would save some time.
Note that any items that version 1 doesn't support won't be
copied, including question slides.
Hopefully this was helpful in some way... Rick

Importing PDF into flash CS3 - Importer du PDF dans CS3

Hello.
Originally, i posted my question in french. So i will try to
convert in english, but my english is poor.
You can see the original in french, in back of this topic, in
bolded text
So, my problem : i can import some PDF files with Flash MX
2004, but i cannot do the same with Flash CS3.
When i import (import in the scene - Command+R) the PDF file
in Flash MX 2004, i got the vectorial logo correctly and the text
as a text.
But when i import (import in the scene - Command+R) the same
PDF file into Flash CS3, there is a problem. At start, i cannot
click the PDF file, i have to choose "all the files" to can click
it. Then i click it and there is a pop window appearing, talking
about "importing video". But my PDF is not Video… And at the
end, the result is a poor jpg image of my PDF, not the vectorials
that i would like.
So why the old Flash MX can do it easily, and the recent CS3
can not ?
What i have to do ?
Bonjour,
Jusqu'à peu, j'utilisais Flash MX 2004 et quand je
faisais une importation dans la scène, je pouvais importer des
fichiers PDF, et j'obtenais en quelques dixiemes de secondes,
l'importation du contenu (en général quelques logos en
vectoriel et du texte). Léger, simple, rapide, efficace !
Et puis j'ai installé la version CS3 Professionnal, et
là c'est la débacle.
Quand je fais importation dans la scène, et
sélectionne une PDF (déjà il m'a fallu aller sur
"tous les fichiers" pour le dégriser) il me sort une usine
à gaz dont voici quelques détails.
- Il commence par m'ouvrir une fenêtre "importer de la
vidéo" me demandant de sélectionner si ladite vidéo
est sur mon DD ou déjà "déployée" sur le web.
(Mon fichier PDF n'a rien de vidéo, c'est une image fixe, nom
de xxx).
-Si je continue, il me demande "comment je veux la
déployer ?". 5je ne veux rien déployer, je veux juste
importer 2 ou 3 vecteurs et du texte !)
- je lui dis de "l'incorporer dans le swf". Il me demande
comment je veux incorporer la vidéo. (C'EST PAS DE LA
VIDÉO, t'es sourd sale bête !!!)
- je lui explique que le "type de symbole" est graphique
(j'ai le même résultat si je mets clip) et il me demande
le codage.
- si je décoche "coder la vidéo" il refuse de
continuer, et si je le coche, il m'importe une espèce de jpeg
atroce, pixelisé à mort et inexploitable (tout du moins
pour l'usage que je compte faire).
Donc ma question est "est-ce que j'ai raté un
épisode ?" (oui, plusieurs, certes, mais de là à
changer complètement l'histoire, faut pas abuser) et la
suivante c'est surtout "comment faire pour importer convenablement
mes fichiers PDF qui ne comporte que quelques logos en vectoriel et
du texte, et le tout fixe fixe fixe, rien à voir avec de la
vidéo ?"
En attendant, je ré-installe Flash MX pour avancer un
peu, mais je ne peux pas croire qu'une fonction primordiale soit
supprimée, comme ça, sans remplacement.
Os court !

Is that really the end, doc ?

Importing H.264 into Flash CS3

I have an H.264 video that I saved out from FCP via Compressor using the H.264 Format for QT 7.0. The Video looks great when viewed in Quicktime. It was my understanding the H.264 is now supported by the Flash Player natively; however, when I try to IMPORT my H-264.mov into Flash CS3 it looks like it only offers me two choices of RE-Encoding to wither VP6 or Spark - this results in an inferior result after it re-compresses the video.
Why can I not just reference the H.264 movie to play without re-encoding?

This is what I did. I saved my movie to the MP4 format in my video editing program and then I used this program to encode it with the H.264 codec. http://www.h264encoder.com Then I used this program to move the metadata from the back of the file to the front so that it would start to play before it completely downloaded. http://howbits.com/stream-mp4-website-h264-high which leads to this link http://rndware.info/download/metadatamover09
I hope this helps you.

Editing Flash CS4 files in Flash CS3

Looking to upgrade our main multimedia production machine from CS3 to CS4, but we probably won't upgrade all the other machines just yet.
Main question: If you work on a Flash file in CS4, can you work on it in CS3 and save it, or will some of the functionality be lost in doing so? Or is a matter of just having to save it in a certain way to make sure it works?
Also, is there any issue with importing CS3 Illustrator, Flash or any other kind of files into After Effects CS4?
Thanks!
Matt

cs4 can save files for cs3 so, it "..is a matter of just having to save it in a certain way..".
you could lose some functionality if you used any flash player 10 capabilites that aren't in fp 9. to prevent that you would always publish for fp 9 in your cs4 file to ensure you could use the file in cs3.
i can't see any problems with importing non-flash cs4 files into flash cs3.

Import Quark 6 files into InDesign CS3?

I'm looking to import my old QuarkExpress 6 files into Indesign CS3. I saw that there is a plug in for about $199 that would allow Indesign to import these files. Is that the only way, or is there a cheaper way to make this happen?
Thanks for any input.

This is not a design question. Please ask in the ID forum.

Import dll file into Flash 8

Hi!
Anyone knows if it’s possible to import a dll file into
Flash, or, if flash can connect in some way to a dll file?
Thanks in advance
Paulo

Well object expand is what I did then copy and paste, I am not certain of the reason to crop.
this is what i got when I expanded copied and pasted. so I do not think the crop is necessary it pastes as a symbol and the symbol is clipped which I think is what you want.
But if in this case you want the stroke as well once you select anyone of the countries they have no stroke according t the tool bar proxy and so it you give it a stroke using say a swatch and then expand copy and paste you get both the fill and the stroke if you desire the stroke as well.
In the case of France and Paris once you paste those into Flash after you stroke and expand then you select both the city and the country and make that into a symbol so that they are one.
And I notice from the art you sent all you have to do is select a country expand, copy, paste and then undo the expand and you are good t go do your work.

Captivate 3 is wrong size when importing into Flash CS3

I've tried exporting, publishing etc. and no matter how I
try, when I import into Flash CS3 the size of the Captivate content
(background screens, in particular) are too small. For example, I
captured a 423x424 area for my Captivate project. When I import
into a Flash CS3 project with the same dimensions the Captivate
content (screens) are more like 203x203.5 and the mouse path and
slide context starting positions are upper left corner. I've tried
adjusting some of the importing settings but can't get the screens
the right size unless I resize each one manually - and I have
around 100. Any help greatly appreciated!
-Scott

I am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r

Image problems importing Illustrator 10 file into Flash MX.

Hello,
I'm working on my portfolio and want to import an Illustrator
(version 10) file into Flash (Flash MX). The problem I'm having is
that when I import the Illustrator file into Flash, it comes out
looking blurred. I tried exporting the Illustrator file into
Photoshop and saving it as a JPEG, PNG, and TIFF (in each file
format, changing the image size to 72 dpi) and I still get the same
blurred result. I also tried saving the file for web, in
Illustrator (in JPEG and PNG formats) with no success as well.
The Illustrator file is a small collage of my graphic design
work (where I pasted graphic work done in Illustraor and made
clipping masks to collage them together), so I'm not sure if
bringing these files together maybe causing some technical issue or
is importing Illustrator files into Flash just something that will
always appear blurred. If so, is there a way I can bring the file
into Photoshop and work with it where I can import it without the
blurred appearance?
Any help will be greatly appreciated.

Hi Matthew,
Here's the Help doc that talks in more depth about Smart Objects:
http://help.adobe.com/en_US/photoshop/cs/using/WS41A5B796-6846-4e95-8459-95243441E126.html
And here's a section that goes into more detail on Placing files:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78f2a.h tml#WS634E6022-BC34-4aa8-857B-21D88D4C8D50a
We have multiple request to add support for externally linked files and certainly see the value. There also are a couple third party solutions that offer linked file behavior (I'm not sure what versions of Ps they work with). You can see and add to the request (and find the third party solutions) here:
http://feedback.photoshop.com/photoshop_family/topics/please_consider_a_references_tool_to _create_links_to_layers_or_folder_groups
regards,
steve

I would like to bring layered Illustrator files into Muse

I would like to bring layered Illustrator files into Muse. It would be great to use them for buttons like the photoshop layered button options.
It would be even better if it just converted the vectors to .SVG files auto-magically, when published.

Importing .ai files in Muse and having Muse export them as .svg is imperative for future proof workflow.
But in order for that to happen Muse would have to have some vector capabilities in itself and that means only one thing: rewrite of the whole app, most likely ditching Air framework.
In other words ain't gonna happen.
When you think about it really it's the Illustrator or Indesign that should do what Muse is doing right now. There is no reason for Muse to exist but they dont want to confuse the users I guess. Illustrator should apply native CSS effects by default enabled when you work on vectors such as drop shadow, round corners, blur, etc. and have it generate .css

Importing a layered photohop file into flash [CS3]

Similar Messages

Maybe you are looking for