Importing a movie into iDVD from FCE

I am perplexed. In the iDVD - Movies display, there are shown half a dozen movies. The other couple of dozen movie files which do appear in Finder - Movies are not listed in iDVD. Nor will the movies in Finder-Movies drag over to iDVD. I clicked on the yellow triangle which appears in the "insert movie" box in the theme, clicked 'import' and it told me iDVD does not support that action. So how do I get a movie from Finder-Movies into iDVD? I did not have this trouble with iMovie.
This is my first completed FCE movie. And things were going so well.

To import movies into iDVD you may use the File/Import/Video... command, after selecting the theme you want to use for the DVD menu.
If a movie in the Import dialog window cannot be imported, probably it has a non standard format, and for sure it was not exported from FCE. Any movie exported from FCE with Export/Quicktime Movie (the only correct method to get a movie from FCE to iDVD) may be imported into iDVD.
So I suggest you review the procedure you used to export from FCE and try again.
Piero

Similar Messages

How to get FCE movie into iDVD?

Hi Folks!
I have a movie that I created in FCE and would like to burn it onto a DVD. When I open iDVD, I don't seem to have access to the movie file that I created. iDVD looks for the file inside iLife. Is there a way I can put the FCE movie into iLife, or is there another way I can burn a DVD from my FCE file?
Thanks very much!
Vixter

iDVD looks in your /Movies folder (not 'inside iLife' as you mentioned).
When you export your movie from FCE, save it to your /Movies folder. Then it will show up in the iDVD Media pane, under the Movies folder.
You can also import your movie into iDVD by doing *File > Import > Video* or by dragging the movie (from wherever it is saved on your hard drive) onto the _iDVD main window_ or a _drop zone_ in an iDVD template. Don't try to drop it into the iDVD Media pane - that won't work.

Help Please ::: Quicktime .mov into iDVD 5 playback or encode problem issue

Originally Imageready files burned into Quicktime. Importing Quicktime .mov into iDVD results in project which looked great in preview, but after burning images were elongated, flattened. I am stumped, especially given preview results would indicate no such problems but unsure where to analyze on the DVD burn end to check. Any tips on what/where to check? Have tried re-importing original ImageReady (Photoshop) files into new Quicktime .mov (original project was done on OS 9 fyi). But no change in results.. any help greatly appreciated.
iMac Mac OS X (10.3.9)

Thank you for the feedback. I wasn't privy to the process that converted these files originally but suspected the theory on compression/codec initially used.. may re-convert. Also will try Disk Imaging... seems that this is not an uncommon problem in the iDVD 5 world...
regards, Senor Peaches
Originally Imageready files burned into Quicktime.
Importing Quicktime .mov into iDVD results in project
which looked great in preview, but after burning
images were elongated, flattened. I am stumped,
especially given preview results would indicate no
such problems but unsure where to analyze on the DVD
burn end to check. Any tips on what/where to check?
Have tried re-importing original ImageReady
(Photoshop) files into new Quicktime .mov (original
project was done on OS 9 fyi). But no change in
results.. any help greatly appreciated.
iMac Mac OS X (10.3.9)

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

Import files into iDVD from iMovie OR export files from iMovie to iDVD?

I've been told it is better to import iMovie projects into iDVD (within iDVD) rather than exporting from iMovie to iDVD within iMovie. I was told that iDVD does a better job of rendering things than iMovie. Is this true because this is not the instructions given in the iMovie tutorial.

Not sure what advice you have been given and how you have interpreted it.
You are of course referring to im6 here since you can't drag projects from im08 to iDVD.
I don't make many DVD's anymore and may well be wrong here but I'm not aware that dragging an im6 project to iDVD is any different than using share/iDVD and I'm wondering if the advice relates to exporting from im6 and then importing the exported movie into iDVD which is indeed a different workflow.

Import iMovie '08 into iDVD '08 Movie Quality

In iLife '06 there were ways to import movies into iDVD to get a good quality movie. Like instead of using the export menu in iMovie I would just open iDVD and click and drag the .mov file straight into iDVD and the quality was great. I guess there was a bug in the exporting method. Now to get a good quality movie on a single layer dvd coming from iMovie '08 are there things I need to know?
PS. I would prefer HighDef with my Sony HDR-SR12. Yeah Yeah I know I need Blu-Ray but until that that comes only what is the best I can get?
Carlos

Use: http://www.apple.com/support/downloads/imovieHD6.html

Import a movie into a slideshow in iDVD

I am trying to do the steps as discussed by "Nashed" (Feb. 2009) in regards to making the video stop after each chapter in iDVD. However, the dragging of the clips to the slideshow window is not working. Nothing happens. A red dot with the number one shows up on the clip when I drag it, but when I place it in the window it does nothing. How do I import a movie into the slideshow window in iDVD? I am using iDVD6. Still photos import fine.

Thanks. I read the thread.
I am running iDVD6. I set up a test project and tried every conceivable way I could think of to drag a movie into a slideshow, and could not do it--not into the slide show button or the main slideshow editing window, or the slide show window in map view. The movie does end up in the slide show audio well, and I can hear the audio (if I have also put in a photo), but could not see any video. Nor does the movie icon show up in map view or in the main iDVD editing window. I tried dragging the video from the audio well, but that didn't work either. I tried dragging it in from the media pane, my desktop, and from the Movies folder. No luck. I even tried copy and paste, and that didn't work. Playing with the preferences didn't help. I had set up a test project and tried it before I posted my initial response to you saying it couldn't be done. Upon revisiting the issue, I, at least, still can't do it.
Nor could the person in the thread who uses iDVD6 drag a movie into a slideshow. "Nasher" could do it but that poster was running iDVD7. So, I am concluding that the ability to drag a movie into an iDVD slideshow only exists in iDVD7 or later. That would explain why it isn't "generally known".
It would be a cool feature if it could be done. Perhaps the answer in your case is to upgrade to iDVD7.
Hopefully someone on this forum, running either iDVD7 or iDVD6, will see this thread and perhaps can help us out here.

FCE movie into iDVD?

Can a FCE movie be exported as a Quick Time movie into iDVD08? How?
When I try to put the QTmovie into iDVD the following message appears:
"The movie could not br opened."
"The file is not a movie file."

I am not able to get a movie into iDVD. Here is my procedure, which is the same as stated on pages 1015 and 1016 in the FCE user manual:
1) I open the FCE timeline of my 26 minute video.
2) I go to File > Export > Quick Time Movie.
3) In the window that opens, I name the movie, specify a location (FC Exp projects folder) and check "Make Movie Self Contained". Then click Save
4) After exporting completes, I find in the FCE projects folder TWO QTicons of my movie labeled av.mov1, av.mov 2, and a thumbnail showing the first frame of my FCE video.
5) In a iDVD page that I have prepared, with completed drop zones, I go to Project > Add Movie which puts a box with the words "Add Movie" on the iDVD page.
6) When I drag either of the two QT files listed above in 4) from the FCE projects folder onto the iDVD page they will not stay, but rather jump back to the FCE projects folder.
7) However, when I drag the thumbnail of the first frame of my video onto the iDVD page it remains. However, this is a FCE file, not a QT file of my movie, and does not support converting my iDVD file into an image for later burning.

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

Importing a movie (mov) into iDVD 16.9

I have been attempting to import a movie (mov) into iDVD. The movie is 16.9 aspect ratio and every time I import it into iDVD it defaults tp 4.3 even though I set it in the beginning within iDVD at 16.9.
Can someone help me

Hi
There are in two places You need to set 16x9
• First when You Create a new project
• Then under Project Info (top row menu)
This can jump back to 4x3 if You select to use such a theme - then just go up and change it back again
SAVE AS A DISKIMAGE
Test this first - to see that all plays as You want it
Then first burn Your DVD
Yours Bengt W

Why can't I import a movie I bought from itunes into my presentation

Why can't I import a movie I bought from itunes into my presentation?

msjones,
Most, if not all material sold on itunes is copyrighted and there are anti-piracy provisions embedded in the code. You may not have the rights to copy the movie to another medium such as Keynote. Your purchase of the movie and what you can do with it are limited.

Why can't I import old imovies into idvd?

Why can't I import old imovies into idvd?

I have 68 GB free and the movie is a small one. The iDVD file is on my hard drive and in the dock.
Today I found a work around for this problem. While I cannot open the original movie, I can access the clips in the media folder. I put the clips together and made a new movie. And I can import this to iDVD by going to "share" in the menu and selecting iDVD.

Cannot import Finalize movie into iMovie

I have a Sony DCR-DVD103 and when I go to File>Import Movies I do see my Finalized DVD, but all the files including the Import button are grayed out. How can I import the Finalized movie into iMovie?
Upon connecting the Video Camera to my MacBook Pro, DVD Player launches. I quit DVD Player and go to iMovie>Import Movies, but never see how to import the movie into iMovie.

I have a Sony DCR-DVD103 and when I go to File>Import Movies I do see my Finalized DVD, but all the files including the Import button are grayed out. How can I import the Finalized movie into iMovie?
The "Import Movies..." option is for importing "edit" compatible files from a hard drive into iMovie '08. If the source files are not already "edit" compatible, iMovie '08 will not let you import them. Instead, try the ""Import from Camera..." option. If iMovie '08 properly recognizes you DVD camcorder, it will import your MPEG2/AAC content by converting all MPEG-2 "P" and "B" frames to "I" frames (which are editable), convert the AC3 audio to AIFF, and place both in an MOV file container with start and/or end time offsets to minimize drift between audio and video. The resulting file can then be edited in iMovie '08.
If the camcorder is not recognized by iMovie '08, then you will probably have to import the MPEG2/AC3 files to you hard drive and manually convert them to an edit compatible compression format manually using an MPEG-based, third-party conversion application like iSquint (free), MPEG Streamclip (free but requires $20 QT MPEG-2 Playback component), FFmpegX, (donation-ware), Visual Hub (pay-ware), MPEG2 Works (pay-ware), or similar application.

I have a short homemade film burnt onto a DVD, I now want to import the movie into IMOVIE on my MacBook Pro so that I can edit it, how would I go about doing this? Welcoming any guidance. Thanks in advance.

I have a short homemade film burnt onto a DVD, I now want to import the movie into IMOVIE on my MacBook Pro so that I can edit it, how would I go about doing this? Welcoming any guidance. Thanks in advance.

1. Insert your DVD.
2. Open Disk Utilities (Application> Utilities> Disk Utilities). Highlight your DVD and press "New Image" on the upper toolbar.
3. Choose the location you would like to save your DVD from the drop down menu, "Desktop" is usually the best choice. Then click Save.
4. When finished, your DVD icon will appear on the desktop with the .dmg extension.
5. With iMovie open, double-click the .dmg file you created to mount it. The iMovie import window will then appear asking you to choose. Click Import All and wait for the Import to complete.

Anyone know maximum QT size that can be imported or dropped into iDVD 2.1?

I've got a QT movie of family photos put to music using iMovie 3.03 and exported to Quicktime as full quality DV.
It plays fine before export. It plays fine within QT, but I really want to import it into iDVD and burn it so it can be played on any dvd player (e.g. my parent's 50th this weekend : ). Everytime I try to import or drag and drop the movie into iDVD 2.1, I get nothing.
One thing bothers me: I burned the QT movie to DVD doing a drag and drop/burn. I then tried to drag and drop and import this file into iDVD. Now, my Mac won't eject the dvd because it says it's in use. Does this mean that iDVD IS working on importing my movie even though the cursor is still active and nothing shows up under my file project info?
My QT file is 540 KB. Is this too big? If so, what can I do? If not, what could my problem be?
I've posted a similar question over in iDVD to see if anyone there has any advice.

Try a restart. That usally helps with me. I don't use iDVD, but I have had some issues with Drag and Drops. Some kind of background process won't quit and thinks it's in use.
Before the restart, quit all apps and then try to eject. Maybe that will help. If not, a restart always does the trick.

Importing a movie into iDVD from FCE

Similar Messages

Maybe you are looking for