Importing a movie into the library

Hello,
I am having trouble importing my movie "Disturbia", which is on my computer, into my iTunes library. It is a m4v file type and I tried dragging the movie into my library but it would not go. I also tried right clicking and open with..iTunes and it still would not go. Any ideas how I could add it to my library??
Casey K.
Thank you for your time!

Similar Messages

Flash 2004 MX will not import .FLA's into the library

I can't imagine why this is- but if someone has some
eperience here- I would be so ever grateful.
I can't get Flash MX 2004 to inport FLA files into the shared
library. When I select inport/into shared library I get an error
message that says flash does not recognize the .fla file type and
wants to know if I should let quick time see if it can recognize
the file. "Use quicktime instead".
Here is what I have tried:
Reset the file types in File/Folder under control panel to
default- Flash- But all file types were already recognzed- -reset
was just a deperation hope and prayer.
Un-installed quicktime then tried to import- no
un-installed flash- reinstalled flash- tried to import- no
Installed newest version of Quicktime and then tried to
import- no
Reverted to a prior system restore point- then
Re-installed Flash - tried to import-no
looked in the registry but could not navigate to anything
that resembled file extensions-
Flash saves FLA's and makes SWF's just as it should- opens
FLA's and sees FLA file types in the saved folder.
When I initialize the import/to library functon FLA file
types are not listed unless I select "all file types" in the file
types drop down- it does recognize SWFs
Flash did recognize FLA's until I played a Quicktime
Instruction CD. With no further action on my part, it quit
importing correctly-
No viruses are found
?? ideas
Thanks
-D
Any other ideas or work-arounds would be greatly
appreciated-

Thanks Shane- but when I need to share a library file- I
select file/ import to library and that is where I get the error- I
was able to share Flash librarys befor I played the quicktime file-
and now- unfortunately FLAs are an unrecognized format. And I am no
longer getting the additional mesage "do you want Quicktime to try
and open them. Just a message that says "one or more files were not
imported because there were errors reading them"
But they open in flash.... which is what I don't understand-
something has happend that flash no-longer sees the fla file type
under the File/ Import to Library.
-D
Yeah, that would have been a ton of effort... Hopefully a
little more clarification in the details...

Automatic Moving a movie into the Library question please?

Good Day.
If I rip one of my own DVD's and have it put directly into the iTunes Move Library, will it come up in the iTunes Movie list window automatically or do I have to do something else?
Thanks for looking.
Tom

Thanks Razor...
But I was wondering if I had a DVD conversation app write the movie *mp4 etc., right into the "Movie" in the iTunes library would the iTunes app/Window see it when I then launched iTunes? Kinda without going thru the above mentioned step....
Thanks again.

ITunes crashes by dropping a mov into the library

Hello,
when I copy a movie-file into iTunes by dropping it from Finder into iTunes-menu at the end of the copy-process iTunes chrashes. I tried it with some movie-files (oder container works).
I did it several times before and it worked.

The MPEG-2-video is from German PAL-TV.
What video-format should I use and how can I export the video to this format without loosing any quality?

Import a movie into a slideshow in iDVD

I am trying to do the steps as discussed by "Nashed" (Feb. 2009) in regards to making the video stop after each chapter in iDVD. However, the dragging of the clips to the slideshow window is not working. Nothing happens. A red dot with the number one shows up on the clip when I drag it, but when I place it in the window it does nothing. How do I import a movie into the slideshow window in iDVD? I am using iDVD6. Still photos import fine.

Thanks. I read the thread.
I am running iDVD6. I set up a test project and tried every conceivable way I could think of to drag a movie into a slideshow, and could not do it--not into the slide show button or the main slideshow editing window, or the slide show window in map view. The movie does end up in the slide show audio well, and I can hear the audio (if I have also put in a photo), but could not see any video. Nor does the movie icon show up in map view or in the main iDVD editing window. I tried dragging the video from the audio well, but that didn't work either. I tried dragging it in from the media pane, my desktop, and from the Movies folder. No luck. I even tried copy and paste, and that didn't work. Playing with the preferences didn't help. I had set up a test project and tried it before I posted my initial response to you saying it couldn't be done. Upon revisiting the issue, I, at least, still can't do it.
Nor could the person in the thread who uses iDVD6 drag a movie into a slideshow. "Nasher" could do it but that poster was running iDVD7. So, I am concluding that the ability to drag a movie into an iDVD slideshow only exists in iDVD7 or later. That would explain why it isn't "generally known".
It would be a cool feature if it could be done. Perhaps the answer in your case is to upgrade to iDVD7.
Hopefully someone on this forum, running either iDVD7 or iDVD6, will see this thread and perhaps can help us out here.

Cannot import a .mov file into the library

I am trying to import a .mov file into my library so I can
create a .fla file. Every time I try to import it into the library
using the import wizard, it starts the importing process and always
quits not quite two minutes into the process. It then returns me to
the front page of the import wizard. I have done this before with
absolutely no problems.
The one thing that I am wondering about is the size of this
particular .mov file. It is 377MB. Do you think this may be part of
my problem? Thank you in advance for anyone's input or
suggestions!

Jeremy Williams wrote:
> I am trying to import a .mov file into my library so I
can create a .fla file.
> Every time I try to import it into the library using the
import wizard, it
> starts the importing process and always quits not quite
two minutes into the
> process. It then returns me to the front page of the
import wizard. I have
> done this before with absolutely no problems.
>
> The one thing that I am wondering about is the size of
this particular .mov
> file. It is 377MB. Do you think this may be part of my
problem? Thank you in
> advance for anyone's input or suggestions!
I would consider 10mb to be too big for a flash file. Even if
it was CD
I would load it dynamically to avoid performance problem.
377mb is out of the question way beyond flash ability to
maintain stable
performance, not just the final output but the IDE itself.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

IPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17)

iPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17). Error message is "File format not recognized". Before that, no problem. Had them first on SD-card over USB, tried then to copy to the HD (Desktop) and import from there, but didn't work. Imported successfully into iMovie and exported as .mp4, but even this is not recognized.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

How do I share my movies with my wife's iTunes account on the same iMac, without having to actually copy the movie into her library?

I apologize if this is already in the forum somewhere, I simply could not find this question being asked anywhere. We have an iMac running Lion with all of the latest updates as well as the latest version of iTunes. All of the digital movies we've purchased through iTunes, have been purchased through my iTunes account. However, my wife is the one with the iPad, and syncs it with her own iTunes library and her own Apple ID. I have turned on Homesharing for my library, and she can see my library from within her iTunes account. We turned on the feature to automatically copy new movies into her library so that she could sync those movies onto her iPad. However, I quickly discovered that it is literally storing a second copy of the movie file in her iTunes folder, and therefore eating up precious hard drive space. Is there a way for her to "check" movies in my homeshare library from within iTunes to sync with her iPad when she connects it, without actually copying those movies into her iTunes folder? If not, any suggestions on how we can solve this issue?

What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge...

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

My old back i had a lot of movies on it and it was stolen. i got a new one and it won't let me download my 400 dollars in movies into my library..all the movies show up on my purchased items how do i do this???

my old back had a lot of movies on it and it was stolen. i got a new one and it won't let me download my 400 dollars in movies into my library..all the movies show up on my purchased itemsbut when i click on them it does nothing how do i get my movie back??

if you cant download them > email the iTunes Store emaill support adn explian the situation adn they will give you a regrant of all your purchases.
expresslane.apple.com > click on iTunes > then iTunes Store > and choose the right prompts
but you should try the pas purchase thing in iTunes first because the regrant is a one time thing. > IE iTunes Store > purchases > click what you want > redownload
> but you do need iTunes 10.5 or later for it to work correctly .
i woudl ask for the regrant it you dont have the options for movies yet

Is there anyway to import facebook albums into the Iphoto library?

I would like to import my facebook albums into the library, but I tried to create albums with all the pictures but they still aren't imported in my library. Is that possible?

i have got the same problem only thing is the albums were never on my macbook just the album covers.
basically my g/f used my macbook pro and found a picture in iphoto she wanted and uploaded it from iphoto so linked her account to my iphoto. i was doing a bit of cleaning up and thought id just remove the link. well it turns out its deleated all the facebook albums on her profile. ive got time machine back ups but its only got one photo from each album in it.
can anyone please help.

When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

Because your clip properties do not match your sequence settings.
It will help a lot if you provide details ...
FCE Easy Setup
Sequence settings (vid rate, frame size, compressor)
Source of your clips (camcorder make/model, etc)
Clip properties (vid rate, frame size, compressor)

Is it possible to use my music files in both my girlfriend's and my separate Itunes libraries through our seperate user accounts?? I want to import my music into her library with out copying the files onto my hard drive a second time....

Is it possible to use my music files in both my girlfriend's and my Itunes library's through our seperate user account? I want to import my music into her library without copying to my hard drive a second time.....

Would any of these help you?:
http://www.apple.com/itunes/inside-itunes/2011/05/two-ways-to-share-media-librar ies-through-itunes.html
http://www.apple.com/itunes/inside-itunes/2011/01/keeping-multiple-itunes-librar ies-on-a-single-computerif-you-share-your-computer-with-others-and-you.html

Can't get songs from my iPod into the library on my new mac

I recently had to get a new hard-drive on my dell laptop, and iTunes was uninstalled from the computer. When I re-installed iTunes, my iPod was not being recognized by the laptop, so none of my songs on my iPod were in the library anymore.
Now I have a new MacBook, and my iPod is being recognized, but I can't get most of my songs from my iPod into the library in iTunes.
I'm sure there is an easy solution, but I can't figure it out!
Any help is much appreciated!!!

If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
Senuti Mac Only
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac & Windows
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

HT5958 Importing footage stored within the library FCPX 10.1

Hello, I like to put additional footage, photos into an event folder and then import the bits I want into the event within FCP X but now it's in a library that location is blanked out, I can't get to it on the import page. Any work arounds, ideas?
Thanks

Ok i was under the impression that libraries were a plac ewhere you can store everything, I had a load of photos for a timelapse that I stored in the event folder in a library, I then (using open p;ackage contents) got to that event folder and made the photos into a timelapse mov. When I went to import that mov into my event the location it is stored in (event folder in a library) is inaccessable, the library package is blanked out. Thanks for your time.

Importing a movie into the library

Similar Messages

Maybe you are looking for