Importing a pdf file into another pdf file

I have a fillable pdf file that I'm editing in Livecycle and wish to add the contents of another PDF file to the end of this one. Can't figure out how to do this.
Please help.

The PDF I am trying to add was not originally created in Livecycle. It was a Word doc that I just converted to PDF.
The New Form Assistant lets me know that right off the bat when I open it. And makes me select one of two options, either Create an Interactive Form with Fixed Pages or Create an Interactive Form with a Flowable Layout. I select the first option. There's nothing that I need to make fillable in this.
What? You want me to post both files here on this board?

Similar Messages

How can I insert a completed file into another PDF file I am developing?

How can I insert a completed file into another PDF file I am developing?

Please refer : http://acrobatusers.com/tutorials/how-to-insert-a-pdf-into-a-pdf

Insert pdf file into another pdf file keeps getting stuck

I am trying to insert a 5 page pdf file into another pdf file (both unsecured) and it keeps getting stuck at about 71%* conplete. I can't even get the file to show up on the screen so i can close it. Help?

I have tried several different files, and get the same phenomenon with each one –
1.     I open an acrobat file.
2.     I open a WORD file.
3.     I copy a sentence from WORD to the clipboard.
4.     I click on View in Acrobat, Tools, Pages, other options, insert from clipboard.
5.     Acrobat shows that it is copying, and when it gets to 67% it stops and runs and runs and then only way I can stop it is to go to the task manager and end task.
I tried refrying with a file and that didn’t work, and I can’t imagine that Acrobat was designed so that each time I try to insert from WORD I would have to refry (even if it did work).
Please help!
Thank you
Shirah
Moadim LeSimcha, times of joy!

How does one copy a PDF file into another PDF document?

I am trying to copy part of a PDF file into another PDF document. So far, the file will copy but will not paste into another PDF document. Any clues?

You can't convert Photoshop to editiable InDesign (though there is a plugin from RecoSoft that claims to make editable ID files from PDF: http://www.recosoft.com/products/pdf2id/).
About the best you can hope for is to leave pixel information in the Photoshop file (where it really belongs) and place that into an ID document, then set any type in ID.
Peter

Insert an swf file into another Flash file

Hi,
I'm a newbie to flash trying to insert an SWF flash file (a game) into another Flash file. However, when I import the swf file into the library and drag it onto the frame (and insert the stop(); command onto the frame action to stop it playing the whole movie), the SWF file plays constantly, ignoring all the actionscript and button commands in the game SWF file.
When I try inserting it using the Window component, the game SWF refuses to play at all - it just stops (clicking buttons in the game work, but it goes-to-and-stops instead of go-to-and-play like it's supposed to do). The only other component I could find was called "Loader". Using this doesn't work either, it won't play any of the animation, just like using the "Window" component
When the game SWF is played by itself (by just double-clicking to open it from Windows Explorer or embedding it in a web page), it works fine.
Any help how to do this would be appreciated.
Thanks.

Hi,
I'm posting in this thread because my problem seems similar but may be not...
In my first swf, I'm loading a second swf via loadClip().
My second swf works well alone but when I try to integrate itself in my first swf I'm losing my events. My events only works on my first swf.
I'v tried your trick with _lockroot but he doesn't work for me too.
Is someone have an idea to help me ?
Thx
My code is really basic
First swf:
        var mcloader:MovieClipLoader = new MovieClipLoader();
        var listener:Object = new Object();
        listener.onLoadInit = function (mc:MovieClip){
            main_obj.__preloader.die();
            obj[funct](target_mc, param);
        mcloader.addListener(listener);
        mcloader.loadClip(file_name, __loader);
Second swf:
    var box:MovieClip = this.createEmptyMovieClip("box"+depth, this.getNextHighestDepth());
    //Draw box
    drawBox(...);
    // Event on Box, Change Alpha and show arrow or not
    box.onRollOver = function() {
        drawBox(...);

How do I import several layers from one Illustrator file into another Illustrator file?

Hi!
I have ten Illustrator documents with appr. 100 layers in each document.
Each layer in all documents are named correctly for automatic script exporting to PNG files.
Now I want to import all layers from all ten documents into one master file. And importantly, I want to keep the exact names of each layer.
Thank you for any help on this!
David

Layers Palette flyout >> Paste remebers layers (Enable)
Now when you paste the layer names will come over.

How to import one project file into another project file

In previous versions I could take an 8 track project file and drag it into another project. This doesn't work in version 10. I am playing multi track stems for worship. I create each song as it's own file then drag them together to create a set. I don't mix down since I want to be able to add or subtract an instrument based on who may or may not be avaiable that day. Has this feature been taken out of Version 10? Can you do this in either Logic or Mainstage?
Thanks

<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml"/>
<xsl:template match="/">
<xsl:variable name="xml1" select="document('xml1.xml')"/>
<xsl:variable name="xml2" select="document('xml2.xml')"/>
<xsl:copy-of select="$xml1"/>
<xsl:copy-of select="$xml2"/>
</xsl:template>
</xsl:stylesheet>

I need to access/pass variables'(s) of a .swf file into another .swf file.

Hi all,
I have basic knowledge of Flash and AS3.0.
Suppose i have a flash swf file(main.swf). In this main.swf
file, i loaded another swf file(sub.swf) by writing the following
code snippet in main.swf file as shown in Attach Code:
Now, how to acess the data present in main.swf into sub.swf.
Note: Here data represents values/data stored in
variables/objects of main.swf file.

Does this actually work -- assigning variables directly on the loader? I'm interested in setting flash variables on the loaded SWF, but I get a compilation error when trying something similar:
Error: Access of possibly undefined property x through a reference with static type flash.display:Loader.
[exec]
[exec] textLdr.x = 50;
I also tried casting the loader to Object, which compiles but then fails at runtime.
-Dave

Converting to PDF and Inserting into another PDF?

Is there a way to convert a file to PDF and then insert that file into another pdf using JavaScript?
Thanks,
Todd

Hi Paul,
Thanks for the response, this is actually an adobe form that has been saved as an adobe dynamic XML pdf. Is there a way to do this in a form via code?
What I would like to do is attach a supporting document to the form and Print both the form and the supporting document with a simple click, is this possible?
Any help or a point in the right direction would be appreciated.
Thanks,
Todd

How to import a XFDF file into a PDF?

I need to import a XFDF file into a PDF through javascript.
Manually in Acrobat 8.0 we are doing through the following steps.
Comments->import comments->browser window open(select the corresponding xfdf file and then click select button)->After that save that pdf file. Kindly help me how to automate this process through programmatically.
Thanks,
Prabudass

See your posts in the other forums.

Why can I only import xml, xdp, or xfd files into my pdf form?

Why can I only import xml, xdp, or xfd files into my pdf form? Text (tab delimited) is not an option. I'm using Acrobat X Pro. Thank you in advance!

Hello George -- The form was not created by me, but appears to have originated in Acrobat. I also saved a copy with LiveCycle Designer to view/edit in design view. Unfortunlately both files had the same limited formats for import. Thanks, Julie

Importing one Pdf document into another.

I am trying to import one Pdf-document into another using a Reference XObject. I am looking at thePDF- specification, and I thought I was doing things the right way, but its not working. The PDF-specification doesen't have an example of how to do this, only an explanation.
Below is the PDF-file I am testing with (if anyone can be bothered looking at it ). The file embeds another pdf-file, and is supposed to show a part of the embedded file at a certain position.
Again, if anyone can be bothered looking at my PDF and see if they can see what I am doing wrong here I would appreciate it.
(There is nothing wrong with the embedded file itself...)
PDF-file embedding another PDF-file and using a Reference XObject to display the embedded file:
%PDF-1.5
1 0 obj
<<
/Type /XObject
/Subtype /Form
/BBox [0 0 100 100]
/Ref <<
/F (4fa27162e72547a00771606.pdf)
/Page 1
>>
>>
endobj
2 0 obj
<<
/Type /Filespec
/F (4fa27162e72547a00771606.pdf)
/EF <</F 3 0 R>>
>>
endobj
3 0 obj
<<
/Type /EmbeddedFile
/Length 854
>>
stream
%PDF-1.5
1 0 obj
<<
/Length 334
>>
stream
q
1 0 0 1 128.10769621539 70.591821183642 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 -128.10769621539 -70.591821183642 cm
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
0 0.89 0.89 0.05 scn
0.2743205486411 w
2.743205486411 M
0 J
0 j
-1.9202438404877 -2.6517653035306 260.05588011176 146.48717297435 re
h
B
Q
endstream
endobj
2 0 obj
<<
/Type /Page
/Parent 3 0 R
/Resources <<
/Font <<>>
/XObject <<>>
>>
/MediaBox [0 0 255.11811023622 141.73228346457]
/Contents [1 0 R]
>>
endobj
3 0 obj
<<
/Type /Pages
/Kids [2 0 R]
/Count 1
>>
4 0 obj
<<
/Type /Catalog
/Pages 3 0 R
>>
endobj
xref
0 5
0000000000 65535 f
0000000010 00000 n
0000000401 00000 n
0000000568 00000 n
0000000624 00000 n
trailer
<<
/Size 5
/Root 4 0 R
>>
startxref
679
%%EOF
endstream
endobj
4 0 obj
<<
/Length 322
>>
stream
q
1 0 0 1 93.268986537973 71.826263652527 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 0 0 cm
1 0 0 1 -93.268986537973 -71.826263652527 cm
55.961391922784 45.628651257302 74.615189230378 52.39522479045 re
W n
1 0 0 1 55.961391922784 42.062484124968 cm
74.615189230378 0 0 55.961391922784 0 0 cm
/XobjectPDF1 Do
Q
endstream
endobj
5 0 obj
<<
/Type /Page
/Parent 6 0 R
/Resources <<
/Font <<>>
/XObject << /XobjectPDF1 1 0 R >>
>>
/MediaBox [0 0 255.11811023622 141.73228346457]
/Contents [4 0 R]
>>
endobj
6 0 obj
<<
/Type /Pages
/Kids [5 0 R]
/Count 1
>>
7 0 obj
<<
/Type /Catalog
/Pages 6 0 R
>>
endobj
xref
0 8
0000000000 65535 f
0000000010 00000 n
0000000144 00000 n
0000000238 00000 n
0000001172 00000 n
0000001551 00000 n
0000001738 00000 n
0000001794 00000 n
trailer
<<
/Size 8
/Root 7 0 R
>>
startxref
1849
%%EOF

PDF is a binary format. The most important piece in a PDF file is the cross
reference table. It contains byte offsets to the different objects in a
file. If you insert just one space (which in a true ASCII file will not
change much), you are making all byte offsets after the insertion point
invalid. They now all point to something different than the start of an
object.
Because there is no standard about how line endings are encoded in text
files, every time may add (or subtract) a byte - depending on what computer
system and what editor you use to convert your PDF to fake-ASCII, and then
again what I use to try to convert it back to PDF. If you are using a
Windows system and I'm using a Mac, the cross reference table gets
corrupted. And that's even before the web server does it's magic and
potentially adds data.
If you want somebody to look at your file.
Have you looked at the post I linked to? The settings in Acrobat are
important. You need to enable Reference XObjects, AND you have to declare
the directory where your target file is stored as trusted.
From what I can see in your PDF code, you are doing a whole bunch of cm
operations. You may want to consolidate all those into one operation. I
have not done a detailed analysis, but you could potentially shift your
data off the page. Keep it simple and see if that makes a difference.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com

Need assistance embedding separate files into a PDF

All,
I am using Adobe Acrobat X Pro (Version 10.1.2). I followed the instructions below to try and embed separate Word, Excel, PowerPoint, and PDF files into my PDF document as thumbnails, but the only problem is, this only works on my computer because the files are saved on my machine. As soon as I move my PDF file which contains the links, the links will not open.
How do I essentially do the same thing but have the thumbnail links be viewable by anyone, no matter their location?
Create a link using the Link tool
Choose Tools > Content > Link. The pointer becomes a cross hair, and any existing links in the document, including invisible links, are temporarily visible.
Drag a rectangle where you want to create a link. This is the area in which the link is active.
In the Create Link dialog box, choose the options you want for the link appearance.
Select one of the following link actions:
Go To A Page View
Click Next to set the page number and view magnification you want in the current document or in another document (such as a file attachment), and then click Set Link.
Open A File
Select the destination file and click Select. If the file is a PDF, specify how the document should open (for example in a new window or within an existing window), and then click OK.
Note: If the filename is too long to fit in the text box, the middle of the name is truncated.
       Open A Web Page
                 Provide the URL of the destination web page.
       Custom Link
                 Click Next to open the Link Properties dialog box. In this dialog box, you can set any action, such as reading an article, or executing a menu command, to be associated with the link.

Hi George,
I just tried adding the files as attachments; however I didn't like doing that because it increased the file size of my PDF document quite a bit.
I'm not sure if you're familiar with the "Insert Object" command in MS Word, but I want to do the same thing in my PDF document...but the key is, anyone must to be able to open the embedded file from any location.
I created an MS Word document with several embedded objects. I was later asked to PDF the Word document, but since embedded MS Word objects do not migrate to the PDF, I am now trying to embed the same files I embedded into my Word document into my PDF document over top of the icon image. The file types I'm trying to embed include MS Word, Excel, PowerPoint, and Adobe PDF. Does this make more sense? I want to create a hyperlink over top the icon image that was PDF'd from the MS Word document which allows any user to click on the link and open the separate file.

How do I combine 41 PDF files into one PDF file?

How do I combine 41 PDF files into a single file using ADOBE PDF Pack?

Hi,
To combine more than 12 files:
Please do below to combine files:
Log into https://createpdf.acrobat.com/signin.html with your Adobe ID and password
Select "Combine Files" from right pane
Click "Select Files" button
Select your files to combine
Enter a name for combined PDF file
Click "Combine" button
Click "Download" button in the progress bar to download the combined file to your computer.
To combine more than 12 files:
Combine 1-12th files and name it “combined 1” for example
Combine 13-24 files and name it “combined 2”
Keep doing step #1 and #2 and combine those combined files to combine all your files.
You can use Acrobat XI Pro to combine multiple files (more than 12 files) by following the steps below and you can download Acrobat XI Pro Trial version from www.adobe.com:
In Acrobat XI Pro:
1. Launch Acrobat
2. Select File menu > Create > Combine Multiple Files into a Single PDF
3. Click "Add Files" button at top left corner
4. Select your files to combine
5. Click "Combine Files" button at bottom of the dialog.
You can upgrade your subscription to Acrobat Plus and please see more information at https://www.acrobat.com/acrobatplus/en/home.html
Hisami

How do I combine several pdf files into a single file (MAC OS)?

How do I combine several pdf files into a single file ?
MAC OS 10.6.8
Adobe Reader 11.0.10
Signed: Ken, in Utah

Not possible with Reader. You need Acrobat or a subscription to something like PDF Pack to do it.

Importing a pdf file into another pdf file

Similar Messages

Maybe you are looking for