Importing a Subversion project into JDeveloper

Ok, I'd really like to use JDev instead of eclipse for a project I'm working on, but you guys sure don't have easily accessible info (at least that I could find in 90 minutes of googling) to check out a project (from Subversion) that was created in Eclipse and have it bring everything in.
Is there a white paper or something? I found on that tells me how to move my JDev project TO subversion, but not the other way.
I have a web project checked out to my hard drive and I simply want to point JDev at it. Heck, I even checked the project out via JDev!
It can't be as hard as it seems for me. I tried doing an import, but it copies the files into a new directory and I'll lose my connection with subversion doing that. (I think)
One other question while I'm at it, in Eclipse it's super easy to find a file by name. This doesn't seem possible in JDev. Am I missing something here?
thanks,
Jet

ok - for 10.1.3 the three key combination is not there - it is in there for 11 - if you can I would highly recommend using this new version.
There is however an extension that will let you search for files in your project in 10.1.3 - http://blogs.oracle.com/shay/2007/07/sample_jdeveloper_extension_go.html
For the JSP and HTML things you'll want to set the "web appliaction" content directory under the project properties->content node.
Something similar to what they are doing here:
http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html

Similar Messages

How to import existing jsp project into jdeveloper

can someone help me how to import existing jsp project into jdeveloper?
can give me step by step to import..cause i am new for jdeveloper..
thank you very much

Well there are two options - if you have a WAR file with the code in it, then you can use the file->import WAR.
Or you can use the new->Project from source code.
Note that you'll probably need to do some library settings and some directory setting after that.
Have a look at this demo for basic steps:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/NBtoJDevProject/NBtoJDevProject.html

How to import maven projects into jDeveloper 11.1.1.5.0

I have a few maven projects that I would like to work on in jDeveloper (11.1.1.5.0). How do I go about converting them into it?
First I created a generic project and tried to import my maven projects into it but when I did the import, jDeveloper didn't give the maven proejct option.
The article in the following link doesn't work for 11.1.1.5.0.
http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#5
Could anyone please help?
Thanks.
C

You will have to download the maven integration extensions. Set the correct proxy from Tools->Preferences->Web Browser & Proxy and then Visit Help->Check for updates. You will find two maven extensions to download.

How to import existing eclipse Project to JDeveloper

Hi,
previously I used to use Eclipse IDE. I have started to use Oracle JDeveloper 11.1.2.4.0 now. How can I import my existing Eclipse projects to JDeveloper? Please Note, I already have tried following options -
"Importing Existing Files into a New JDeveloper Project" from here - Working with Applications and Projects.
But, When I import the source files from existing Eclipse Projects to JDeveloper, I am not able to crease similar directory structure in the JDeveloper(in Application Navigator). As a result, I can not use my existing ANT build script to build my project[Though JDeveloper build my project,but I want to use manual ANT build.]
Moreover I don't want to change my existing directory structure as I am working on and existing project and I need to synchronize to my repository(Apache SVN).
Can any one help me in this - How can I import existing Eclipse Project to JDeveloper? Without any significant change in directory structure.
Best Regards
Chandramoulee

Well there are two options - if you have a WAR file with the code in it, then you can use the file->import WAR.
Or you can use the new->Project from source code.
Note that you'll probably need to do some library settings and some directory setting after that.
Have a look at this demo for basic steps:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/NBtoJDevProject/NBtoJDevProject.html

Error while importing an existing project into workspace

hi,
I am trying to import an existing project into workspace but getting an error 'vfamilychange' doest not have a .project file .But while checking into the folder structure of project vfamilychange' shows the .project file is already there.
Please do suggest.

Hi,
To correctly use the project in a new NWDS. Please use the following method (for Windows XP only):
1.) Navigate to the projects folder. This will be in the "DC" or "Local Development" folders in your "Documents and Settings" folder.
2.) Inside the project folder you will find an "_comp" folder.
3.) Zip this entire folder with WinZIP or WinRAR.
4.) Finally goto the new PC / Location of export. Unzip this archive into a new Folder.
5.) Open NWDS. Goto File->Import->Existing Project into Workspace.
6.) Select your folder (where you extracted the archive).
Hope that helps.
Thanks.
p256960

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer.

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer. I copied the project files onto a hard drive, and then connected that drive to the Mac that my main project is on, but when I select "import" the files are faint gray -meaning I can't select them. Help! I want to transfer a sequence of shots from one iMovie 11 project on one computer, into another iMovie 11 project on another computer.

Tell me it ain't so!
I wish I could. The research you've done is correct.
Wether you copy and paste or rebuild the Project from the other computer, you're going to need to get your Evnets copied from the other computer.
The Prjoject files only contain pointer back to the original media.
Matt

Problems Importing Premiere Pro Project into After Effects

I've got my first Pemiere Pro CS6 project completed. Now i want to import it into After Effects CS6 to add titles.
The PR file includes two segments, two still photos and two AE compositions. I am trying to import the PR project into AE two different ways:
1. File>Import> Adobe Dynamic Link>Adobe Premier Project. When I do this, the project looks great in the Footage tab of the RAM preview window on the right. But when I make a new sequence to get it on the Timeline so that I can begin to add titles, I get only blackness in the Comp tab of the ram preview window whether I am playing a RAM preview or a spacebar preview.
2. File>Import> Adobe Premier Project. When I do this, the two AE segments are missing.
I am on an iMac with OSX.7.4.
Can anyone give me some advice on the best way to do this?
Thanks!
--Carol Gunn
Gunn Graphics
Austin, TX

You will need to render out those two AE compositions to video before you can bring them back into AE through dynamic link. If you are concerned with making changes, you can always replace footage in Premiere with a new render.
Dynamic Link is just not designed with your workflow -- AE doesn't open multiple projects at one time, and your workflow ends up with AE trying to open 3.
You can bring those two compositions into AE as imports. They won't be linked together (so any changes in original project will not reflect in imported version) but you would have all 4 elements in one AE project.

How to import an j2ee project into j2ee perspective of NWDS

while trying to import an j2ee project into NWDS .....it is giving an error """unbounnd classpath container:org.eclipse.jst.j2ee.internal.web.container".
So where must be the problem.Should i have to install some eclipse plugins in the NWDS ????

Hello again
Sure, you can import the topics as a "batch" by selecting many topics at once.
As for the links, I'm thinking that as long as you maintain the relative locations between the linked topics, that all should be fine.
What I mean by the relative locations is to say that if you have a folder structure in the source project, you will need to ensure you have the identical folder structure in the destination. Then ensure the topics are copied to the exact folders.
Cheers... Rick

Import an eclipes project into jse

Hello,
I want to import my eclipse project into JSE. I also would like to use the UML to model my project. How do I do this seamlessly?
I also currently use XMLSpy (home edition) to maintain my schema and Altova provides a plugin for this in eclipse. Can I use this plugin in JSE?
Thanks

Hello,
I decided to try NetBeans to import the eclipse project.
After specifying my workspace and checking the packages that I wanted to include I got this error :
java.lang.AssertionError: Projects can't be null
     at org.netbeans.modules.project.ui.OpenProjectList.doOpen(OpenProjectList.java:232)
     at org.netbeans.modules.project.ui.OpenProjectList.open(OpenProjectList.java:208)
     at org.netbeans.modules.project.ui.OpenProjectList.open(OpenProjectList.java:160)
     at org.netbeans.modules.project.ui.OpenProjectsTrampolineImpl.openAPI(OpenProjectsTrampolineImpl.java:43)
     at org.netbeans.api.project.ui.OpenProjects.open(OpenProjects.java:92)
     at org.netbeans.modules.projectimport.eclipse.ImportProjectAction$1.actionPerformed(ImportProjectAction.java:93)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at org.netbeans.core.windows.services.NbPresenter.superShow(NbPresenter.java:800)
     at org.netbeans.core.windows.services.NbPresenter.doShow(NbPresenter.java:843)
     at org.netbeans.core.windows.services.NbPresenter.run(NbPresenter.java:831)
     at org.openide.util.Mutex.doEventAccess(Mutex.java:1146)
     at org.openide.util.Mutex.readAccess(Mutex.java:183)
     at org.netbeans.core.windows.services.NbPresenter.show(NbPresenter.java:816)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at org.netbeans.modules.projectimport.eclipse.ImportProjectAction.performAction(ImportProjectAction.java:102)
     at org.openide.util.actions.CallableSystemAction$1.run(CallableSystemAction.java:94)
     at org.netbeans.modules.openide.util.ActionsBridge.doPerformAction(ActionsBridge.java:47)
     at org.openide.util.actions.CallableSystemAction.actionPerformed(CallableSystemAction.java:90)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
[catch] at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I am reporting this as the IDE requested I do it.
Cheers

Having an issue importing a 10 project into 9...please help

Hi,
My company downloaded a trial version of RH 10. We built a lot in 10, but then, we decided to purchase a copy of RH 9.
We were told we could import a 10 project into 9, but when I try to do that, I get the following error message saying it's not possible.
Can we, or can we not, import a 10 project into 9?
Thanks,
Jeff

Willam van Weelden wrote:
Here's how to downgrade:
http://www.wvanweelden.eu/articles/downgrade-robohelp-project
Kind regards,
Willam
Thanks WVW!
This is why forums are great....many points of view and you can usually get to the truth at some point!

Import a fb3 project into fb4

I'm ready to import a fb3 project into fb4. What changes does this actually do to the fb3 one such that i cannot be used by fb3 again?
Should I do this with my production projects yet? I think the benefits would outweigh any risks.

I imported a flex 3 project into flash builder but in the design view I'm getting
model edit failed, the same property cannot appear twice
I'm not sure how to correct this.
I'm using fb4 beta 2

How to import existing projects into JDeveloper 11g

I am trying to work with JDeveloper for my application and want to know whether it is possible to import existing projects into the work space in JDeveloper. I am currently working with eclipse IDE and this feature is available in it. How can I connect to clear case from JDeveloper? In eclipse it is very easy to connect to clear case with a plugin installed and check out, check in files from the source control. Any help is greatly appreciated.

The basic way to import code is to use the "New->Projects->Project from existing code" or "project from WAR" dialogs to create your project.
You then need to do some tweaking in the project properties->Content (and sub nodes such as resources and Web content).
And also set the correct JARs/Libraries in the project properties.
You can use the help->check for update to download the extension to JDeveloper that will let you integrate with Clearcase to do version management.
This how-to might help you with your migration:
http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html

Error Importing Premiere Elements project into Premiere Pro CS5

Hi,
I am working on a multi-part video project that I started in Premiere Elements 8. I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!). So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later. Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!). I'd like to import that project into CS5 if possible. The help documentation says this should be perfectly possible... but I'm having no luck.
When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal. But then as soon as it starts trying to open the project, I get this:
"The Project could not be loaded. It may be damaged or contain outdated elements."
I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested). Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
Am I stuck recreating the project from the ground up in CS5?

In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
Now, there are all sorts of considerations, for aspects that will not likely work:
Instant Movie/Themes, as PrPro cannot read those
Some Effects that PrPro does not have, like the NewBlue FX
Some Transitions that PrPro does not have
Some Title animation Presets, that PrPro does not have
Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
Good luck,
Hunt

Problem with importing a Motion project into FCP if it uses a Boris filter

Had an odd and highly frustrating experience. Was using a Boris Continuum filter (the posterizing one) on the background of a Motion project (was using it to age a background of a brick wall to age it and give it a more 'nighttime' look).
When I imported the file into FCP to use as an intro there, the background disappeared entirely. After an hour of troubleshooting, finally figured out that it was the Boris filter that was causing the problem (it also was probably responsible for the random crashing of FCP I was experiencing), as when I disabled the filter and re-saved the project, it worked beautifully.
Is this a 'normal' problem when using Boris filters? Do I have to export every Motion project into a Quicktime file before importing it to FCP (and possibly DVDSP) if it uses a Boris filter?

Thanks! Now the frustrating thing is that the client doesn't want to use what I created after all...bah humbug
It's not the RAM (which is either 8GB or 16....not sure on that computer). Got an e-mail from Boris Support that implied that this will happen all the time...that you have to export all projects before you use them in FCP or DVDSP or the Continuum filters won't work (loved how the support person suggested that I just use the filter in FCP...which defeats the purpose of creating something in Motion! But I digress...) Told me I had to buy a $500 program called Automatic Duck to get things to import properly...and that Boris filters won't work with the latest upgrade of FCP, btw.

Importing a WinHelp project into RH 8 HTML changes the fonts in all my styles

I am trying to import a WinHelp project created with RH 8 for Word into RH 8 HTML. I have noticed two major things:
1. The first topic is preceded by the names of many fonts. At the end of these set of fonts, my topic appears. I am attaching a partial view of these fonts below:
Arial;Courier New;Symbol;Helvetica;Courier;Tms Rmn;Helv;New York;System;Wingdings;MS
Mincho ;Batang ;SimSun ;PMingLiU ;MS Gothic ;Dotum ;SimHei ;MingLiU ;Mincho ;Gulim
;Century;Angsana New;Cordia New;Mangal;Latha;Sylfaen;Vrinda;Raavi;Shruti;Sendnya;Gautami;Tunga;Estrangelo
Edessa;Cambria Math;Arial Unicode MS;Cambria;Calibri;Tahoma;CG Times ;Univers ;Times;Verdana;CommonBullets;Webdings;WP
MathA;Adobe Caslon Pro Bold;Adobe Caslon Pro;Adobe Fangsong Std R;@Adobe Fangsong
Std R;Adobe Fan Heiti Std B;@Adobe Fan Heiti Std B;Adobe Gothic Std B;@Adobe Gothic
Std B;Adobe Heiti Std R;@Adobe Heiti Std R;Adobe Kaiti Std R;@Adobe Kaiti Std R;Adobe
Garamond Pro Bold;Adobe Garamond Pro;Birch Std;Blackoak Std;Brush Script Std;Chaparral
Pro;Charlemagne Std;Cooper Std Black;Giddyup Std;Hobo Std;Kozuka Gothic Pr6N B;@Kozuka
Gothic Pr6N B;Kozuka Gothic Pr6N EL;@Kozuka Gothic Pr6N EL;
2. All Topics are imported as far as I could tell at a glance, but all the fonts have changed. I used styles based on the Normal_RWH.dot template that has been modified.
Anyone can tell me how to recover my fonts besides doing so manually?
Thanks,
Esperanza

It sounds like the first problem is related to Snippet 56.
http://www.grainge.org/pages/snippets/snippets.htm
My guess is you just delete the unwanted text.
To correct the styles you may be lucky and just have to go into the Style Editor and change the font for each style. If not you will need to look at the HTML and you will likely find an inline style sheet in the topics and maybe even inline styling. Sorting that out will depend on your knowledge of HTML.
Snippet 104 may also help you.
Post back if more help needed when you have worked through that.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Importing a Subversion project into JDeveloper

Similar Messages

Maybe you are looking for