Importing Analog Component Video

I'm using a Sony J-30 deck to import Beta SP and want to import at a higher quality than the Firewire out in the back. I was wondering if I could use the Component Video out instead? If so, what type of hardware do I need to convert to a digital signal? My hope is to be able to import as DVC50.

Thanks, I installed a Blackmagic HD extreme 2 and am having capture problems. I can control the deck from fcp, but no audio or video comes through. The only way I can import is by using capture now and the clip Import is all black with no audio. Have tried multiple import settings, but still no luck. Please shine some light on me.
Message was edited by: s80man9

Similar Messages

  • Trouble importing analog 8mm video with Premiere Elements 9.

    I have some old analog 8mm tapes that i'm using a sony camcorder to import through firewire. When I try to import the entire tape (2hrs) It doesn't automatically add the tape to the organizer or timeline. But it does create the .mov file and I can open and play it in quicktime. Problem is when I try to import it into adobe premiere elements 9. It gives me an error: Too many audio channels in file. When I take shorter clips less than 5min. The clips automatically get imported correctly and no error is given. When I compare the video files both have the same audio info, but the longer video will not import. I'm really confused. any ideas?
    Mac 10.6.6

    Either something is very wrong on your system or there's something you're not telling us.
    You're capturing your video by going to Premiere Elements' Get Media and selecting From DV Camcorder, right?
    If so, when you capture your video, it should show up in your project when you click the Project button (under the Organize tab).
    Is this not the case?
    You keep referring to the Organizer. You should not be using the Organizer to capture your video. You should use Premiere Elements' Get Media/From DV Camcorder. Is this what you're doing?

  • UVW-1800 analog component video output low into Decklink Extreme

    I have come to realize that my UVW-1800 is feeding into my Decklink Extreme card at 75% of the level it should (based on NTSC bars). I can raise the input level of the Decklink. But I wonder if the ultimate problem is increased noise using this fix. I am about to test the composite output level. I do not have a regular WFM moni so I can't see the level until after I get it in.
    Thanks, Chris.

    Chris-
    You might also look on eBay for a TBC remote. Even using the scopes in the Final Cut capture window will be OK. Analog video is subject to huge variations in levels and chroma. Getting them close to proper at the machine will give you a much more pleasing result than adjusting them after the fact in the digital domain.
    The usual order of adjustment for analog machines is to first set the black level, then the white. If you adjust the white much it will affect the blacks, so go back and reset those. Which will affect the whites. so go back to THOSE. Usually about 3 tweaks on each will get both to the proper levels. Then set the chroma amount, and hue (if you are using the composite signal).
    Finally on the %75 percent issue. It turns out that in analog video if you add the R,G,and B signals you only get 75%. So if you have full field bars that may be correct. You need SMPTE bars, which have a 100% white box at the bottom of the frame, to correctly set your video level.

  • Need help - connecting Monitor and TV at same time with component video

    I have a mac mini, connected via DVI to a monitor - I bought a DVI splitter to connect the monitor to one port and the tv to the other via a DVI to Video adapter, using component video. When I plug in the DVI to Video adapter, the primary monitor loses its connection and I cannot seem to get the TV to recognize the signal - what am I doing wrong?

    In my case, the Barco Cine7 CRT projector I would like to connect the new Mini to accepts a pretty wide variety of analog component video formats, but I cannot find a listing of what the Mini supports. Presuming I use a DVI to VGA adapter and then a VGA to RGB cable, can the mini video card output any one of the following analog component formats:
    RGBs or RGsB - R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync)
    RGB with tri level sync - R, G and B with separate tri level sync or with tri level sync on green.
    Component video - R-Y, Y and B-Y with separate sync or with compositesync.
    Component video with tri level sync - R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.

  • Will FCE 4 Import Analog 8mm Tapes (unlike iMovie '08)

    Hello--
    I've had a heck of a time importing my older analog 8mm tapes onto my MacBook and was wondering if dropping bigger bucks on FCE 4 will help.
    Since iMovie '08 for some reason won't import analog 8mm tapes from my Sony TRV-330 Digital8 camcorder, I've had to import the tapes using iMovie HD. The problem is then I have to save the iMovie HD project before I can import the video into iMovie '08 where I want to tag and edit it...and this takes a lot of extra time (hours per tape).
    On other discussion boards, people have suggested using other video importing applications such as Vidi, iDive, and QuickTime Pro. The first two didn't seem to work out for me, so I just spent $30+ to get QT Pro...that was a mistake because the video and audio quickly got out of synch which was completely unacceptable (some of my older tapes have periodic video and audio dropouts due a problematic camcorder at the time, which I understand can cause that problem...but it didn't seem to be a problem for iMovie HD).
    So, since I've read on these FCE discussion threads that FCE uses QuickTime it makes me wonder if I'd have the same video/audio synch problems in FCE (if it even would import analog 8mm video at all).
    BOTTOM LINE: Has anyone successfully imported analog 8mm videotapes from a digital camcorder into FCE 4? I'd really like to be able to catalog, tag, and edit ALL my tapes (analog 8mm and Digital8) in iMovie '08 (but am willing to try to do it in FCE 4 if that's a better comprehensive solution). When will Apple fix iMovie '08 to make the lives of those of us who want to transfer old analog 8mm tapes easier??

    Thanks for the response, M.R. I didn't know QuickTime was also the import engine for iMovie HD...if that's the case, I don't know why iMovie HD would import my analog 8mm tapes while iMovie '08 doesn't (assuming iMovie '08 also uses QuickTime as the import engine).
    I haven't really considered a converter box since the Sony TRV-330 camcorder does the analog to digital conversion...seems like it'd be unnecessary. Do you think there's the possibility that the output from a converter box would look different than the output from my digital camcorder to iMovie '08?
    --Bill

  • Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane,  it enlarges it slightly and distorts it.  How can I keep that from happening?

    Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane,  it enlarges it slightly and distorts it.  How can I keep that from happening?

    Hi
    Turn off analyze/image stabilization.
    Yours Bengt W

  • Import Analog Video

    Hi,
    I would like to import analog video into my Mac so that I can edit and extract video. I have many analog video tapes and I would like to import into my Mac. I can output video to my analog video camera or to a VCR but can't input. There is a unit, Elgato's EyeTV, for viewing TV that imports but I don't plan on watching TV on my Mac. I hear you can burn to DVD with a VHS-DVD deck and Extract from the DVD using software (Hand-Brake).
    I saw a cheap unit that works with Windows which interfaces through, I believe, USB 2 port but it didn't seem to be Mac suported.
    Looking for suggestions I have open slots on my G4 Mac for PCI cards.
    Richard
    1.25 GHz Dual G4 Desk Top   Mac OS X (10.4.9)  
    1.25 GHz Dual G4 Desk Top   Mac OS X (10.4.9)  

    There is a unit, Elgato's EyeTV,...
    It is possible to use the Elgato EyeTV devices (and EyeTV software) to capture analog video. The Elgato devices record mpg-2 video on your hard drive and you can then use something like DVDxDV or MPEG-Streamclip to convert the mpg-2 content to DV video for use in iMovie,
    Since you will be starting with VHS tapes, you shouldn't loose any additional quality in the process.
    F Shippey

  • Inability to import  Analog video (video 8) to iMovie HD

    I have analog videos (video 8) which I can not import to iMovieHD but can import the analog video (Hi 8). Any suggestions?
    Thanks.
    iMac 10.4.3
    iMovie 5.0.1 (v99)

    Hullo Ernieluc - very pleased that your problem is solved.
    I am interested that you have been able to use 'pass-through' to import your analogue video. Did you have to have a tape in your camera, or were you able to do it with no tape?

  • Importing analog video problems

    I'm trying to import some old 8mm Sony video into imovie and it only gets imported as Black & White video. I'm using a new Canopus ADVC 110. setup - analog inputs into the front of the canopus and firewire cable, one supplied, out the back to thefirewire port on the iMac. Importing works but it only comes in as B&W. Also no sound during importing but is there during playback. Is there special settings to make this works on either the canopus or the iMac? Any suggestions to how I can get the video imported as Color video would be greatly appreciated. Thanks

    It is almost certainly nothing to do with the Mac.
    Analogue-DV Converters need careful configuring to work properly. Read the User Manual carefully and check that it is set up for a Mac. (Mine, a different make, had a hidden panel at the back with several switches that all needed to be in the correct positions for the particular task).

  • DVI to component video - possible?

    I'm trying to find a way to connect the DVI output of my MacBookPro 1.1 to the component video inputs of a Sony STR-DH810 receiver which is hooked up to my TV. I discovered I can't use the HDMI inputs on that receiver with an alternate audio source, which is why I'm trying component video. When I connect everything, I get no video - only audio. I know the component video inputs are good because they work with my DVD player component video outputs.
    The owner's manual of the receiver says "display system must support component video (Y, Pr, Pb) signal output function in order for the image to display properly". Does my MacBookPro work this way?
    I guess my other option might be to find a DVI to composite video cable, if such a thing exists?

    Hi s,
    I don't know that I've heard of successful DVI to component, but in theory it may work, as the GPU outputs both digital and analog signals.
    OTOH, I've seen a number of reports that this works (S-Video or composite):
    http://store.apple.com/us/product/M9267G/A
    Message was edited by: tjk

  • DVI to Component video w/ MacBook Pro and NVIDIA GeForce 8600M card...

    I just got a new MacBook Pro with the NVIDIA GeForce 8600M video card. On the NVIDIA website for the card, it states:
    "Integrated HDTV encoder provides analog TV-output (Component/Composite/S-Video) up to 1080i/1080p resolution".
    I have a Sony HDTV that only has component video (Y Pr Pb) inputs (the red/green/blue inputs). It is capable of HD up to 1080i.
    If the NVIDIA card does output an analog TV (Component) signal, it should work. However, when I went to the place that sells the DVI-to-Component adapter, I got some bad news:
    See it here: http://www.amazon.com/gp/product/B000E8V0YI/ref=pdluc_sbs_0202
    I wrote a question to the Sewell folks about this product and asked this:
    Will this work with the dual link DVI-I port on my macbook pro? Graphics card info: Nvidia 8600 GT 256MB of GDDR3 memory Here is the link to the card's site: http://www.nvidia.com/object/geforce_8600.html
    They answered:
    Unfortunately this will not work. While the GPU may support the function, the Mac Version of the cards do not implement the component signal.
    I think they are still thinking about the older MacBooks that use the ATI chipset and don't know about the new NVIDIA cards.
    Is component really not implemented in the new MacBook Pros?
    I have the 17" model that has more VRAM than the 15" and I got the HD screen upgrade.
    Does anyone know any solution that will work with the MacBook Pro with the NVIDIA chipset? As I said, I'm trying to output an HD signal from the DVI port on the MacBook Pro to component video input on my HD television.
    Thanks for the help.

    Sorry, the website for the Sewell adapter is here:
    http://sewelldirect.com/dvivideoadapter.asp

  • Component Video/Stereo Audio

    Is there any way to get component video and analog stereo out of the new AppleTV with a apple converter? Need this to go into an existing 16x16 component matrix switcher.

    The problem you will encounter doing this is that component doesn't carry HDCP, and therefore any HDCP content will not play on your Apple tv.
    Not quite true, Winston. Check out the HDFury line of products. Their units include HDCP support. However, like most other such devices, the HDFury units do not include scaling capabilities. Therefore, you must be sure that the device to which you wish to connect it supports the TV2's 720p output as an input option. (E.g., my old Philips HD ready TV only supported 480p and 1080i but not 720p video.) Also of interest is the fact that some of these units also support HDMI to stereo/digital 5.1 audio via an analog/digital combo 3.5 mm cable.
    In any event, I'm presenting the March SJAUG TV2 demonstration for our user group and just purchased the HDFury3 "Advanced Kit" in order to capture TV2 firmware menu images for inclusion in my resource presentation. It worked great! Both the HDFury2 and HDFury3 have switchable Component/RGBHV output options depending on your needs and connector adapter you use. Unfortunately, owing to the popularity of this device and sales demands here in the US, I had to order my kit from the Taiwan manufacturer.

  • Is there a Thunderbolt to Component Video cable / adapter for the new iMac?

    Hello!
    My church is looking to purchase a new iMac to run our presentation software.
    We currently have a PC that has a graphics card which has a component-out cable.  We connect that to a component video distribution amplifer to distribute to several HDTVs and a projector.
    Is there a way to connect the iMac to a component video (Y, Pb, Pr or Red blue Green) input?
    I understand that DVI is digital and Component is analog, but has anyone found a device, cable, and/or adapter that will do the job?
    Thanks,
    Randy

    There's at least this one:
    http://www.amazon.com/DisplayPort-Composite-Video-S-Video-Converter/dp/B004VV8R8 6
    and the review says that it works with current Macs, but I can't verify.
    Regards.

  • How can i use apple tv and iTunes movies with component video cables for an older receiver and projector?

    i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?

    Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.

  • VGA to Component Video

    Can anyone help, I've acquired a 500 Mhz iMac and would love to mirror the display on my TV. Unfortunately the scart socket on th back of my TV is taken up with other stuff (satellite and DVD) but I do have Component Video still available. Is it possible to find a cable to go from VGA to Component, or would it be better to go from VGA to DVI and then to Component?
    I've searched Google, but am bewildered by the choices available. Can anyone provide so useful links?
    Thanks,
    Lee

    VGA to component makes more sense (and is probably less expensive). VGA is analog and so is component. DVI is digital. There is no sense in going from analog to digital and back to analog.
    But I've never tried such a cable on a Mac's VGA output, so I'm not saying it will definitely work.

Maybe you are looking for