Importing and Creating Org Charts

I am trying to move org charts from powerpoint to Keynote so that I can quick using powerpoint but have been unable to find information on creating org charts in keynotes......is this not a feature of Keynote right now?

I've created really fine looking Org Charts in Keynote before. Keynote doesn't have Org Charts as a specific feature, but I usually do it by drawing boxes and lines.
There's another product called OmniGraffle that has the some of the specific org chart features you're looking for. By the way, what specific features are you looking for in org chart creation? Just thinking there may be some way to fake it in Keynote (because Keynote really does make them look better!)

Similar Messages

  • Problem with importing and creating self signed SSL certificate

    Mac Pro, 10.7.2 Server.  Attempting to import or create a self signed certificate for use as ichat.domain.com to encrypt iChat service.  Server is acutally called server.domain.com but has an alias of ichat.domain.com.  I understand that this is probably not best practice but I would like to keep things this way since we have one server, run multiple services on it, but want to continue to connect to each service at SERVICE.domain.com.  We have been using this type of mismatched certificate with success since 10.4 or so.
    I am working through setup of 10.7 Server to replace our 10.6 server. 
    Tried upgrade of 10.6 to 10.7 installation.  The installation made a mess of some services and our Open Directory, but did move the certificate over and allowed iChat service to function properly.
    Clean install and setup of 10.7 Server.  Exported self signed certificate, private key, and encryption password from 10.6 Server and functioning 10.7 upgraded Server.
    On import or manual creation of certificate get the following error:
    Error
    Check your server's logs for more information.  The error (code 5001) was: Expected SecKeychainItemImport to return a SecIdentityRef, but it did not
    Log shows:
    Dec 29 17:56:55 server servermgrd[498]: -[CertsRequestHandler(HelperAdditions) importP12Data:passphrase:error:]: importedItems = (
                  "<SecCertificate 0x7fcf6ed43c00 [0x7fff78d96f40]>"
    I have tried importing and manually creating other certificates with a variety of names with success.  I assume that there is something buried somewhere that is causing this particular one to be a problem.  Other than manually removing any remnants of the certificate from /etc/certficates I do not have any ideas what to try.  I am essentially ready to move this server to 10.7 except for this problem and would like to avoid a reinstall.
    Suggestions?
    -Erich

    Take a look here.
    https://bbs.archlinux.org/viewtopic.php?id=146649
    Maybe it's a problem with your network.

  • Imported and created "optimized media" but thumbnails and video is missing!!

    Hi guys,
    My i7 MacBook Pro just spent the last 12 hours importing a selection of h.264 .mov's from my Canon DSLR. I had selected "creat optimized media" to convert it all into ProRes at the start like I have for my other projects in FCPX. But this time, once it had completed, only a couple of the clips have thumbnails/ play video when scrubbed over, and the vast majority of the clips have black thumbnails and only play audio. I tried restarting FCPX without any luck... any thoughts on what's going on? If I have to spend another 12 hours doing it over again, I'm going to have one unhappy client.
    Between random bugs like this, freezes, crashes and the lack of ProRes LT (I'm bloating all my Canon video files by converting them into regular ProRes and hogging up hard drive space at an alarming rate), FCPX is really starting to get on my nerves. I've been really patient with the software and wanted to like it so much - I even gave it a positive review on the App Store, but Adobe Premiere is looking better and better every day.
    Thanks in advance for any help guys.

    Just out of curiosity- what happens when you click 'Create optimized media' off in preferences? Also- are the original clips still visible and working on your hard drive- i.e. the H.264 clips from the camera?

  • Program (ERD) with import and create options ??

    Hello ! I am searching now a program (free or cheap) for create and import from oracle diagram erd. Anybody can help me ?

    You can try the Data Modeler. It will import from Designer and Erwin.
    http://www.oracle.com/technology/products/database/sql_developer/index.html#
    It is cheaper than most of the others.

  • Easy way to create an Org Chart in AppleWorks?

    I have used MS PowerPoint to create and maintain Org charts in the past. I see that the Presentation piece of AppleWorks has similar functionality to PowerPoint.
    Is there an easy way to start making an Org Chart (Supervisor, subordinates, etc) or do I just create circles and lines and create the "hard way?"

    If, by the "hard way", you mean "manually", then with AppleWorks, yes.

  • How do I create a chart in Keynote that auto-updates from data in Numbers?

    Hello all!  So, there are lots of answer to this for iWork'09, but I haven't found them for the current version of Work.
    What I'd like to do is take data from Numbers and create a chart in Keynote that would then auto-update if I edited the data in Numbers.  Put another way, the Keynote chart data would 'live' in Numbers - every time I edit the Numbers data, I'd like those changes to reflect in Keynote.  Any thoughts on how to do this outside of always cutting and pasting from Numbers to Keynote?
    Thanks!!

    Thanks Gary.  I thought I was crazy.  I remember that it used to be available - bummer that it's not now.

  • IDM Org Chart Postions need to be created automatically in IDM as MX_ROLE

    Hi,
    We have a requirement to create the org chart positions with a one to one mapping to IDM Business Roles but there is no standard SAP functionality to do this in the SAP Provisioning Framework or VDS.
    Creating each Business Role will take too long and we need to have a process where new positions in HR are autmatically created as an MX_ROLE entrytype in IDM
    Can anyone help me in determining an effective way so that all business roles can be created from the ECC HR Org Chart as an initial load type job?
    We do not expect to have any privileges assigned yet only the MSKEYVALUE and the Description loaded into IDM for MX_ROLE entrytype. The privilege assignments will be a manual process.
    Thank you
    Shan

    Hi there,
    I have also been trying to do this but am not very good at abap  so am having trouble doing the extract from HR for the positions.
    Can you help with the position extract part of this configuration.
    If i understand correctly you are loading a file into IDM which creates all the business roles which is exactly what I want to do.
    Thanks,
    Shan

  • Nakisa Org Chart 2.1 - excluding org units from extract and saving chart

    Hi,
    Is it possible to exclude specific org units from the org chart that is extracted to Nakisa? These (and all subordinate) org units should not be included in the chart which is to be published on the intranet.
    Also, what is the easiest way to create a file (e.g. PDF, PowerPoint) of all org units and positions in the structure? I've looked into using the ChartBook functionality but this did not seem to work too well, and there was no option to Save or Print the chart.
    We have Nakisa OrgChart 2.1 SP1 running on SAP CE. This is with a staged extract out of SAP ERP which is hosted on Windows and SQL.
    Thanks.

    Thanks Stephen and Luke.
    I will look into your comments re: excluding org units from the directory searches etc when next at the customer site.
    As for the Chartbook issue - the customer is looking to create a file (e.g. HTML, PDF) of the entire org structure which they can then make available on the intranet. (They currently only have license for a couple of HR users so ESS access is not an option right now). We have looked at using the standard Print/Export options as well as the Chartbook and neither seems to work particularly well....the customer keeps referring back to how easy it is to create a HTML file using OrgPublisher....
    What is the recommended and best approach for creating a file which can be published on a company's intranet? (There are about 1000 positions/employees in total so not a huge file).
    Hopefully v3.0 is a whole lot easier to use
    Thanks, Ron

  • HRMD_A idocs sent and processed, but Org chart doesn't reflect it sometimes

    From our HR box, we send HRMD_A idocs to our FI box - We have an intermittent issue where we have a position change & the idoc gets created & sent over.
    On the inbound side, the idoc gets posted successfully with Status 53. However, this EE does not appear in the org chart as it does on the HR side.
    We have these IDocs set up to process immediately, so it passes to the FI port and is processed all within a few seconds.
    We come across this issue once about every 3-4 weeks and I can't seem to get anywhere trying to resolve it.
    any ideas?

    There are two main annoying problems with Flash Builder and swc's:
    1.  Flash Builder doesn't reflect changes made to swc files
    Solution : First of all - keep your swc files inside your project folder, you can also disable global swc cache: change as3api.cpp code,refresh swc in flashBuilder bug!
    2. Flash Builder breakes content inside swc files (and also popular problem "TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@1f21adc1 to...")
    Solution : locate the project .actionScriptProperties file and set useFlashSDK=”false” :  Flash Builder 4.7 – useFlashSDK | In Flagrante Delicto!
    In this case you can also download latest Apache Flex SDK to target new Flash player versions: http://flex.apache.org/
    Hope this helps!
    P.

  • How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents.  Any ideas?

    How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents.  Any ideas?

    This feature has been removed from Pages 5 along with over 90 others:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Pages '09 is still in your Applications/iWork folder.
    Trash/archive Pages 5 and rate/review it in the App Store.
    Peter

  • Doubt in  export, import and table para when creating Function Module

    Dear fellow ABAPers,
    I have a doubt in defining export, import and table parameter while creating a function module.
    I am calling a function module inside a user exit. Now in the user exit the SAP fills an internal table called i_lfa1 with all the data user has eneterd.
    Now I want to pass this whole internal table to function module and the perform some checks on the values of internal table.
    After that function module fills an error structure with values depending on some check.
    1)
    How do I pass this internal table to function module ? 
    When I am creating function module in se37 where do I define this iternal table type ? Is it in Import or Table parameter during function module creation?
    2)
    Where do I define error structure type (which is returned by function module to main program)? Is it in Export or table parameter during function module creation?
    Please clear my doubt..
    Relevant points will be awarded.
    Regards,
    Tushar.

    Hi Tushar,
    1. How do I pass this internal table to function module ?
       I assume u are creating your own Y/Z FM.
       Pass it thru TABLES parameter.
    2. When I am creating function module in se37 where do I define this iternal table type
       Define this in TABLES interface.
       What Type ?
       THE SAME TYPE WHICH HAS BEEN DEFINED
        WHILE PASSING IN THE USER-EXIT FUNCTION MODULE.
       IF U SEE THE FM OF THE USER-EXIT,
       U WILL COME TO KNOW.
    3.
    Where do I define error structure type (which is returned by function module to main program)? Is it in Export or table parameter during function module creation?
    Define it in TABLES interace. (not in export, import)
      (Since what u are going to return is an internal table)
      U can take for eg. BDCMSGCOLL.
      OR u can create your own Y/Z structure
    for the same purpose.
      (or u can use the structure type T100)
    I hope it helps.
    Regards,
    Amit M.

  • Need to create a chart in summary page and link it to data

    I need to create a chart in a XL worksheet that contains other summary information. I am able to create a chart in a seperate sheet but i simply cannot find a way to insert a chart into a worksheet already containing some information. To make it clear, my requirement is as follows:
    Inser a chart in cell 'X,Y' with a dimention of 'W,H' and link the chart data to some data in some other page 'sheet1'.

    And that answr is?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to create a chart with x and y input arrays

    I am trying to create a chart that receives chunks of data from a while loop.  I know how to create a chart in order to append new data points to those points already in the display, but a regular chart doesn't let me specify the x axis data points.  Is there a way to create a chart with x and y array inputs?
    Thanx,
    Tom

    It's called an XY Graph. If you need an XY graph to behave like a chart, look at the shipping example called XY Chart.

  • Entries in CDS.log file and Org Chart Link

    Hello Gurus/Luke/Stephen:
    I have a live SAP connection for Org Chart 3.0 (build 5.1.32.1) for Nakisa 2.0. I have correct entries in backend R/3 system and I have right entries in Nakisa (through Admin Console). I have also done HR-OCI configuration. Still I am not able to launch OrgChart - it gives following error "Cannot find the root of OrgChart. The OrgChart box may have been deleted or incorrectly specified". Please find following entries from CDS.log file from server:
    ( 10/20/2009 11:10 PM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation.  {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
    10/20/2009 11:11 PM:     ERROR: Rfc_Read_Table : Source {Nakisa.SAP.Proxy}: Message {[SAPConnector.Open]: Password logon no longer possible - too many failed attempts}
    10/20/2009 11:11 PM:     ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
    10/20/2009 11:11 PM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation.  {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts')
    I do have correct password, so I am not sure what is the issue. Please advise.
    Thanks,
    Jha

    Here are more errors from CDS.log file:
    10/22/2009 12:47 AM:     ERROR: SAPRoleMapping_SAP.MapRoles() : Object reference not set to an instance of an object.
    10/22/2009 12:47 AM:     ERROR: Bapi_Hroci.getDataSetBase() : Exception has been thrown by the target of an invocation.  {Inner Exception:[SAPConnector.Open]: Password logon no longer possible - too many failed attempts'
    10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
    10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: ReportingDirectory does not exist.
    10/22/2009 12:48 AM:     ERROR: ApplicationConfiguration : getListingDirectory : listing directory: DirectoryListing1 does not exist.
    Thanks,
    jha

  • Import package and create view object

    Hi,
    How can i import package from another project and create a new view object with my package and with the imported package.
    Thanks
    null

    Hi,
    How can i import package from another project and create a new view object with my package and with the imported package.
    Thanks
    null

Maybe you are looking for