Importing APEX 2.x application into a 3.1.2 APEX Installation

We have another department which would like to share an APEX application with us, though it is an earlier version. Can we import a 2.x workspace into APEX 3.1.2?
Thanks, Diane

We contacted Oracle Support and their answer is below:
===================
Yes you can import the Application that is created in Apex 2.0 to Apex 3.2
While performing the import please review the below documents, which may help you.
How to Upgrade / Migrate from APEX 2.2.0.00.32 to 3.1.2 (Doc ID 578630.1)
After Export / Import Of Workspace, There Are No Applications (Doc ID 358858.1)
ORA-942 When Importing Applications or Workspaces in APEX (Doc ID 1333062.1)
===================
I will close my thread. Thanks, Diane

Similar Messages

Build Error While importing standard application into NWDS

Hi all,
I am trying to Import T&E Standard Applications into NWDS.
Two components (tra & tra/tre) have to be synched to the studio. These two are interdependent..
One Component I am able synch and create project perfectly but when i try to do the second one, i am getting Generation BUILD Error...
Help me in this regard..
Thanks
Malla
Edited by: challa mallareddy on May 7, 2009 12:34 PM

Hi,
As per your error, I think you have already created a project with name NewParProject. Give a different name and then check.
Also check if your par file is not corrupt. Download it again and follow below steps in NWDS :
Go to File>Import > Select par file >
>Browse and select the par file>
>Give a project name i.e. ParProjectTest > Finish.
This should work.
Regards
Deepak

Unable to install 3.1 application into 3.0.1.00.07

Hi everyone,
I am trying to import Mr.Kubicek's application into my workspace, but I am getting an error as follows:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 9, column 1: PLS-00306: wrong number or types of arguments in call to 'CREATE_PAGE' ORA-06550: line 9, column 1: PL/SQL: Statement ignored <pre>begin declare h varchar2(32767) := null; ph varchar2(32767) := null; begin h := null; ph := null; wwv_flow_api.create_page( p_id => 0, p_flow_id=> wwv_flow.g_flow_id, p_tab_set=> '', p_name => 'P
Error installing application.
Can anyone please help me.
rgds,
Suma.

In addition to commands above, do the following as well:
In the command
wwv_flow_api.create_flow(
Remove the following line
p_date_format => 'DD-MON-RR',
Replace All Occurences of
PICK_DATE_USING_APP_DATE_FORMAT
With
PICK_DATE_DD_MON_RR
Replace All Occurences of
HIDDEN_PROTECTED
With
HIDDEN
In the command
wwv_flow_api.create_report_region (
Delete the following lines
p_prn_content_disposition=> 'ATTACHMENT',
p_prn_document_header=> 'APEX',
p_prn_width_units=> 'PERCENTAGE',
For more info and other useful Oracle ApEx tricks visit [Importing Oracle ApEx 3.1 Page Export into ApEx 3.0 Application|http://www.web-backlinks.com/blog/index.php/2008/10/21/importing-oracle-apex-31-page-export-into-apex-30-application/].

Page Not Found error trying to import a large application into ApEx XE DB

I have an ApEx application that I'm trying to import from a Standard DB into Express Edition. I have 2 separate installs of ApEx both on XE and I'm getting the same problem on both.
PROBLEM:
After I import the application I get the error: PAGE NOT FOUND standard error.
The import file is 4.8 Mbytes. When I view the import repository it shows increments of the file being loaded.
for e.g. First time 3 MBytes are loaded before the error is shown
Second time 3.2MBytes are loaded then it falls over again.
any suggestions?
Smaller sized apps load up with no problems.
If it weren't for the sad state of the internal XE web server I could at least have a look at the HTTP logs. But alas someone in their wisdom had the bright idea to hide the webserver away in the bowels of the XE database.
thanks in advance for any help
Paul P

Paul,
You can try the suggestion in this thread on the XE forum:
Re: Problem with importing HTML DB applications
It also shows how to turn on logging in the XE web server.

Error importing APEX 4.0 application into APEX 4.1

Hello,
I'm not sure it has anything to do with APEX versions, but when importing a APEX 4.0 application into APEX 4.1, I get the following error:
ORA-00942: table or view does not exist
DAD name: wluapex
PROCEDURE : wwv_flow.accept
URL : http://harpo.wvnet.edu:9954/pls/wluapex/wwv_flow.accept
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=9954
SERVER_NAME=harpo.wvnet.edu
REQUEST_METHOD=POST
QUERY_STRING=
PATH_INFO=/wwv_flow.accept
SCRIPT_NAME=/pls/wluapex
REMOTE_HOST=
REMOTE_ADDR=184.13.119.210
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTPS
REMOTE_USER=APEX_PUBLIC_USER
ORACLE_SSO_USER=
OSSO_IDLE_TIMEOUT_EXCEEDED=
OSSO_USER_GUID=
HTTP_CONTENT_LENGTH=416883
HTTP_CONTENT_TYPE=multipart/form-data; boundary=---------------------------7db702cc602f8
HTTP_USER_AGENT=Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)
HTTP_HOST=harpo.wvnet.edu:9954
HTTP_ACCEPT=text/html, application/xhtml+xml, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-US
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=ORA_WWV_REMEMBER_UN=WISERS:WLUTEST; ORA_WWV_USER_71401175607832=63F8D4BD93EE9776
HTTP_IF_MODIFIED_SINCE=
HTTP_REFERER=https://harpo.wvnet.edu:9954/pls/wluapex/f?p=4000:460:4154733060059762::NO:460:F4000_P56_CREATE_OPTION,P460_FILE_TYPE:IMP,FLOW_EXPORT
HTTP_SOAPACTION=
HTTP_ORACLE_ECID=1319804299:129.71.2.217:3530870:0:7033,0
HTTP_ORACLE_CACHE_VERSION=
HTTP_AUTHORIZATION=
WEB_AUTHENT_PREFIX=
DAD_NAME=wluapex
DOC_ACCESS_PATH=docs
DOCUMENT_TABLE=wpg_document
PATH_ALIAS=
REQUEST_CHARSET=AL32UTF8
REQUEST_IANA_CHARSET=UTF-8
SCRIPT_PREFIX=/pls
HTTP_IF_MATCH=
HTTP_CACHE_CONTROL=
SOAP_BODY=
HTTP_X_ORACLE_DEVICE_CLASS=
HTTP_X_ORACLE_DEVICE_ORIENTATION=
HTTP_X_ORACLE_DEVICE_MAXDOCSIZE=
HTTP_X_ORACLE_DEVICE=
HTTP_X_ORACLE_ORIG_ACCEPT=
HTTP_X_ORACLE_ORIG_USER_AGENT=
HTTP_X_ORACLE_USER_LOCALE=
HTTP_X_ORACLE_USER_NAME=
HTTP_X_ORACLE_USER_DISPLAYNAME=
HTTP_X_ORACLE_USER_USERKIND=
HTTP_X_ORACLE_USER_AUTHKIND=
HTTP_X_ORACLE_USER_DEVICEID=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE1=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE2=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLASTLINE=
HTTP_X_ORACLE_USER_LOCATION_BLOCK=
HTTP_X_ORACLE_USER_LOCATION_CITY=
HTTP_X_ORACLE_USER_LOCATION_COMPANYNAME=
HTTP_X_ORACLE_USER_LOCATION_COUNTY=
HTTP_X_ORACLE_USER_LOCATION_STATE=
HTTP_X_ORACLE_USER_LOCATION_POSTALCODE=
HTTP_X_ORACLE_USER_LOCATION_POSTALCODEEXT=
HTTP_X_ORACLE_USER_LOCATION_COUNTRY=
HTTP_X_ORACLE_USER_LOCATION_TYPE=
HTTP_X_ORACLE_USER_LOCATION_X=
HTTP_X_ORACLE_USER_LOCATION_Y=
HTTP_X_ORACLE_SERVICE_HOME_URL=
HTTP_X_ORACLE_SERVICE_PARENT_URL=
HTTP_X_ORACLE_HOME_URL=
HTTP_X_ORACLE_MODULE_CALLBACK_URL=
HTTP_X_ORACLE_MODULE_CALLBACK_LABEL=
HTTP_X_ORACLE_CACHE_USER=
HTTP_X_ORACLE_CACHE_SUBID=
HTTP_X_ORACLE_CACHE_AUTH=
HTTP_X_ORACLE_CACHE_DEVICE=
HTTP_X_ORACLE_CACHE_LANG=
HTTP_X_ORACLE_CACHE_ENCRYPT=
HTTP_X_ORACLE_ASSERT_USER=
Any ideas on what may be causing this error?
Thanks,
Bob

We contacted Oracle Support and their answer is below:
===================
Yes you can import the Application that is created in Apex 2.0 to Apex 3.2
While performing the import please review the below documents, which may help you.
How to Upgrade / Migrate from APEX 2.2.0.00.32 to 3.1.2 (Doc ID 578630.1)
After Export / Import Of Workspace, There Are No Applications (Doc ID 358858.1)
ORA-942 When Importing Applications or Workspaces in APEX (Doc ID 1333062.1)
===================
I will close my thread. Thanks, Diane

How to import 3.2 application into APEX 4.1

Hi,
I would like to import an APEX 3.2 application into APEX 4.0. Is this supposed to work?
Regards,
Tamas

Apex is built to make this process as smooth as possible.
In 4.x, there is a Utilities section for your application with an Upgrade Application option that provides a summary of all the components that can be "upgraded"
Apex tries to leave your application alone as much as possible, and in this report you'll see things like Date Picker items that can be automatically upgraded to the jQuery version. You can choose which components to automatically process.
The most trouble you'll have is if you have included any external libraries such as jQuery and there may be syntax differences, now that Apex 4.x includes jQuery components.
Dimitri Gielis has quite a few posts on the subject
http://dgielis.blogspot.com.au/2010/07/upgrade-to-apex-40-known-issues.html
Scott

ORA-20091: Invalid Application ID when importing APEX 4.0 Application

Hi Folks
Anyone got a suggestion on this one?
Scenario:
1. Perform an APEX 4.0 Export of application ID 10132 from one workspace
2. Import the application into another APEX 4.0 workspace and change the application ID whilst doing so.
3a. During the import process, override the application ID to one that exists in the workspace being imported into.
In APEX 3.2 you got a warning that you were overwriting an existing app
In APEX 3.2 this would then complete the exercise with your new app replacing the previous one with the same ID
In APEX 4.0 I received ORA-20091: Invalid Application ID
3b. Delete the pre-existing application (e.g. app_id 999) completely in the workspace we intend to import into
Following successful deletion of the application (app_id 999) attempt to import the application export file from the other workspace
During the import, use the UI to change the application id from 10132 to 999.
Still receive the ORA-20091: Invalid Application ID error despite APP ID 999 having been deleted
4. I got this to work by allowing APEX to simply assign a new application ID
My problem is that, whilst this was not a problem when importing to our UAT environment, our DEV and Production environments share the same APP ID (10132) this is so that when upgrading the production application, users saved Interactive reports are preserved. This was fine in APEX 3.2 but is, as yet, untested by us in 4.0.
As things stand at the moment, we have APEX 4.0 in DEV and UAT but this would appear to be a block for us in terms of upgrading production to 4.0.
Any thoughts, comments and suggestions welcome.
Many thanks
Kind regards
Simon Gadd

We ran into a similar problem. My initial tests showed the following to be a work around.
Assumption: You want to end up with the same ID as the original so you don't have to give a new link to everyone.
1. Before copying the app (lets say it's 333) from 3.2 (3.1 in our case) export it and then import it back, still in 3.x with a different app ID, i.e. 99333.
2. In ApEx 4: Import the app 99333 and install it with app ID 333 (the original app ID). After this process, I was able to make necessary changes to the app on ApEx 4, export it, and then import it again, still as ID 333.
I know this sounds very round-about, and I can't explain why it worked, but it worked.
Disclaimer: I certainly may have missed something that would still make it break. This was the result of a few different test scenarios done in a limited time.
So, it's probably best to wait for 4.0.1 if you can.
By the way, I tried creating a brand new app. in ApEx 4, export it and then import it as itself, and I still got the same error. Like I said, I don't know why it worked, but when I imported an older app with one ID into ApEx 4 with a new ID, I was able to export it and then import it again with that same new ID.
Have a great weekend,
Gregory

Is there way for me to import my yahoo email contacts into my mail application that i set up for yahoo?

Is there way for me to import my yahoo email contacts into my mail application that i set up for yahoo?

Yes I am using the in but app and set up using the yahoo option. I have moved the sliders to on for mail contacts calendar etc but I see nothing still. I have removed all other sources of contacts and still it's empty. Is there anyway to force a resync? Many thanks.

Can't import an application into HTMLDB.

I cannot import an application into HTMLDB. I have tried small applcations and even the sample application that comes with HTMLDB. The apache logs give me the error 'HTTP-404 ORA-00904: "CONTENT": invalid identifier' no matter what I try to import. This installation of HTMLDB is installed on a 10g database (10.1.3) and is using the Apache server from a 10gAS installation (9.0.4). We have several htmldb installations on 9.2.0.4 databases using both 10gAS(9.0.4) Apache and 9.0.3 Apache. This is the only installation that gives us any problem. All of our HTMLDB installations are 1.6.1.00.02. There are no invalids in the flows_01600 schema. Any ideas on how to resolve this issue.

I have created a dad on 9.0.3, and the import works. The dad in both are identical to what I can see. The 10gAS Apache logs has a preceding error message, here is the complete error messesages generated by the 10gAS Apache server when I try to import an application :
[Mon Jun 13 08:58:13 2005] [warn] [client 172.22.101.206] [ecid: 1118671093:172.23.5.52:11116:0:1608,0] mod_plsql: DMS Logging: Unable to open/create /modplsql.lck
[Mon Jun 13 08:58:13 2005] [error] [client 172.22.101.206] [ecid: 1118671093:172.23.5.52:11116:0:1608,0] mod_plsql: /astech/wwv_flow.accept
HTTP-404 ORA-00904: "CONTENT": invalid identifier
I have searched metalink for anyting on the "modplsql.lck" error and have not found anything.

Import the CRM ICSS5.0 java application into track

Hello CRM People,
we are try to import the CRM ICSS5.0 application into the development track, But in the transport studio we are not able to import the actual physical icss5.0 component.
We dont know where we went wrong, Please can any body let us know how to proceed with import the icss5.0 into a track in CMS,
Thank you in advcance,
CRM AM

follow the link:
http://java.sun.com/docs/books/tutorial/2d/images/index.html

Import from an EP5-BSP-Application into EP6 SP12

Hello Community,
after the import from an ep5-bsp-application into the ep6 sp12 installation, no text will be displayed by the checkboxes.
For example, a <a href="http://img216.imageshack.us/img216/9051/ep5ep66xh.jpg">screenshot</a> for my problem.
<hbj:checkbox
    id="CR02"
    text="Repair report"
    key="CR02"
    tooltip=""
    checked="FALSE"
>
How can I resolve this problem?
Greetings
Michael
Message was edited by: Michael Nett

Hi Tafkap,
Once you have created the par file you have to first deploy it to your Server to store it to PCD.
http://<server-name>:50000/irj/servlet/prt/portal
<b>Note:</b> There will be input box where you have to give the path of your par file. It will be having the heading as:
<b>Please specify a Portal Archive file (PAR) and press "upload" to store it into the PCD.</b>
1) Login to the Portal.
2) Go to Content Administration.
3) Go to Portal Content. Right click it and you will find option (New from PAR).
4) Create New from PAR -> iView.
5) Now a list of PAR files deployed on PCD will appear and there you will find the PAR file which you have also deployed.
6) click on it and press Next.
7) Enter the Name and ID whatever you want.
8) Finish.
9) Now you can see the iView with the name you have mentioned. Right click it and preview it.
10) Or just click the iView and then click on the preview option.
Now you view the page in your default browser.
Hope this help you.
Regards
Pravesh
PS: Please consider Awarding Points if you have solved the problem
Message was edited by: Pravesh Verma

Unable to Import Discussion Forum Packaged Application

I'm attempting to import the Discussion Forum Packaged Application into a 3.2.0.00.27 instance of APEX running on Oracle 10g XE (Windows XP). When I attempt to import the workspace, I am presented with the following error message:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 2, column 100: PLS-00103: Encountered the symbol &quot;'; end;&quot; when expecting one of the following: ( - + case mod new null &lt;an identifier&gt; &lt;a double-quoted delimited-identifier&gt; &lt;a bind variable&gt; avg count current max min prior sql stddev sum variance execute forall merge time timestamp interval date &lt;a string literal with char
I was able to import the Document Library application without issue. Any suggestions?

Installing the updated Web Toolkit did fix the problem. However, the installer script also was missing the last "end;" statement, which caused it to fail. But is now working. Thanks.

How do I import Map Info Tab files into Spatial for a map of europe?

How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
Any Help welcome :|
Tim

Tim,
MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
Andy Greis
CompuTech Inc.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done.

How do You import an MS Access MDB into Dreamweaver CS5?

Hi;
How do You import an MS Access MDB into Dreamweaver CS5?
Developed a DBase application for a vertical market using MS Access. Worked on it for over a decade.
Have been in contact with a rather large company and we are talking about licensing my program with them.
BUT; they want it "On the Cloud"
Here is what needs to be accomplished. Ideally a user can log in from anywhere, (similar to on-line banking), enter data and print reports.
Read this a few days ago:
"If I were in your situation and felt that there's a growth market for your offerings, I would personally go with a PHP/MySQL-based model. The printing issue can be readily resolved with PDF-based output.
So the Querys, Forms and VBA Code needs to be brought in from MS Access to Dreamweaver.
Can this be done? Or is there a better way that I haven't learned yet?
Would someone be so kind and point me in the correct direction.
Thank You for taking the time to read this post.
Andy

>Can this be done?
No, not any way that I know of. You would need to completely rewrite this as a web application. Obviously the MS Access tables can be migrated to MySQL and the Access queries converted to views. But the forms and custom code needs to be written from scratch in html and your choice of server side programming language.

Importing APEX 2.x application into a 3.1.2 APEX Installation

Similar Messages

Maybe you are looking for