Importing ARIS content to Solution Manager

Hi Colleagues,
I'm looking for information on posible restrictions to import ARIS content to Solution Manager.
Have anyone been through this and could share what challenges we could expect?
I found a document called "IMPORTING ARIS FOR NETWEAVER CONTENT INTO SOLUTION MANAGER" from Sukumar Natarajan but it just explain its steps.
Thanks a lot,
Renato Petrulis

Hello Renato,
To Import ARIS to Solman, you need have an install in solution manager, have a project created on tx solar_project_admin, have the ARIS Business Architect ready and follow the simple steps mentioned in the document you talked about.
Please reply for any other doubt,
Cheers,
César Aranda

Similar Messages

  • Upgrade ASAP roadmap content in Solution Manager

    Hello,
    Does anyone of you know how to upgrade the ASAP roadmap content in solution manager?
    Current we have solution manager 4.0, SP12. The version of the ASAP roadmap content is V3.6 (Dec. 2006). We currently found from the service marketplace the lastest ASAP implementation roadmap (V3.7)
    https://websmp106.sap-ag.de/roadmaps.
    Is it possible to somehow "upload" this new version into Solution Manager roadmap to replace the older version? Or how should we get the roadmap content upgraded?
    Many thanks for your input!!
    Regards,
    Li

    It is delivered in ST-ICO SAP Solution Manager Implementation Cont. Ver 3.6 is in SP11, I would imagine V3.7 is in SP 13.
    You would have to up your service pack or use the standalone one until then.
    Derek

  • Organizing the BI content in Solution manager - preproject activities

    I am looking for suggestions on how to organize the BI content in Solution Manager, this as one of the pre-project activities. How should this be organized to create the BBP.
    For example: organize creating folder according to the source module Reports for SD, Reports for FI, etc. And then a BBP for each of this requirements?

    In my previous project we had separate projects for functional areas and hence had a BBD for each - but then these were big projects with separate teams for SD , MM etc and hence this was morew of a necessity that purpose...
    Depending on the amount of development , I would suggest having separate folders - else if certain modules can be clubbed - then you can have it together...
    Another thing is if yu intend to track changes through solution manager also - this becomes something much more complex...

  • Problem in installation of Business Content for Solution Manager

    Hi all,
    I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
    Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects  (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
    The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like  “Infopackage 0SM_XXXX does not exist in D version; activation not possible”. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I don’t know why. The result is that no Process chain is visible from transaction RSPC.
    Am I missing some step, or doing a wrong/ incomplete procedure ?
    Thanks a lot

    HI Saravanan,
                  For Solman Service Desk, the following objects are used :
    Cube : 0CSRV_C01
    DSO  : 0CRM_PROH
    DataSource  :  0CRM_SRV_PROCESS_H
    And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
    Regards
    Mahesh Kumar

  • BI content for  Solution Manager 4.0

    Hi Experts,
    I want to install BI content for  Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
    if somebody knows somthing , please , let me know.
    Thank you.

    There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
    0SM_DSWPBI_BPM                   BPM Data (Alert Data)
    0SM_DSWPBI_DB390               
    0SM_DSWPBI_DB400                DB400 Data
    0SM_DSWPBI_DBADA               Adabas Data
    0SM_DSWPBI_DBDB2               DB2 Data
    0SM_DSWPBI_DBINF                Informix Data
    0SM_DSWPBI_DBMSS              SQL Server Data
    0SM_DSWPBI_DBORA              Oracle Data
    0SM_DSWPBI_MODUL              Module Data
    0SM_DSWPBI_PERF                 Performance Data
    0SM_DSWPBI_SERVER            Server Data
    0SM_DSWPBI_SYSDATA          System Details Data
    0SM_DSWPBI_SYSTEM            System Data
    There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider.

  • CRM Content for Solution Manager

    Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Please help.
    Kind Regards
    Felix

    >
    felix chabeli wrote:
    > Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
    >
    > I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
    Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
    If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
    The content is shipped via add-on ST-PI and its support packages.
    Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
    Regards,
    Ruediger

  • Configure EP to display contents from Solution Manager

    Hello,
    How to Configure EP to display contents from Solution Manager? I want to access Solution Monitoring through Portal, how to do this?
    I will appreciate if someone can help me,
    Waiting for reply,
    Regards
    Sharmishtha

    Hello Lee
    I want to display solution monitoring on portal. I will access the portal instead of solution manager to view CCMS alerts.
    I have configured ccms in solution manager which is my central system, so now i want to display these contents on portal.
    is there any way i can do this task. I have solman 4.0 with SP15. I use work center for this configuration.
    Will appreciate if you can direct me the right way.
    Thank you
    Regards
    Sharmishtha

  • XI-Content for Solution Manager Service Desk

    Hi Experts,
    From an SAP course (SMO150) I am reading that XI-Content should be available for SAP web services.  In particular I am interested in Solution Manager Service Desk content.  (This course is on Solution Manager Service Desk).
    However when I go to look at the SAP official location for XI content I cant find anything on Solution Manager.
    For an overview of the XI content currently provided by SAP, see the SAP Developer Network (SDN) under https://www.sdn.sap.com/irj/sdn.  In the navigation area, choose SOA Middleware ® Repository-Based Modeling and Design. On the Repository-Based Modeling and Design page, choose SOA Business Content.
    Could anyone indicate where I can find Solution Manager Service Desk XI-Content? (if it exists).
    Many thanks,
    Brodo

    Hi Just try
    Check this link
    Service Desk
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a281d7ea-0c01-0010-679d-b8c7fd120295
    Go to http://service.sap.com/solutionmanager and click the following:
    Media Libraray -> Technical papers -> Service Desk: Additional Information . may be helpful
    Regards
    Abhishek

  • Error in xpras when importing support packages in solution manager

    Hello,
    We are importing support packages in our solution manager and we begun
    the process more than two weeks ago and the process is still running.
    I have stopped the system and restarted the import again, but it seems
    to be the same. The SP queue is:
    SAPK-1507EINSTPL
    SAPK-1507FINSTPL
    SAPK-1507GINSTPL
    SAPK-1507HINSTPL
    SAPK-1507IINSTPL
    SAPK-1507JINSTPL
    SAPKB70015
    SAPKA70015
    SAPKITL426
    SAPKIPYJ7F
    SAPKW70017
    SAPKU50012
    SAPKB70016
    SAPKA70016
    SAPKITL427
    SAPKIBIIP9
    SAPK-40012INCPRXRPM
    SAPK-40013INCPRXRPM
    SAPK-40014INCPRXRPM
    SAPKNA7012
    SAPKNA7013
    and there is an error (rc=12) at the method execution step in package SAPKU50012 or in SAPKB70016.
    Now, there is an rc 12, but the queue is running, the import queue hasn't cancelled, but it seems to do nothing. The RDDEXECL job log is:
    Job started
    Step 001 started (program RDDEXECL, variant , user ID DDIC)
    All DB buffers of application server crosol203 were synchronized
    Error Building the ENH TreeObject Type:XHObject Name:EH_FJ_FUBA_PARA_VERS
    the job was running for 149.332 seconds and at that moment I stopped the sap system. After restating the system I imported the queue again and now, the process has been running for more than 13500 seconds.
    We have checked note number 1142410 and all the modifications were already implemented in the system.
    Thanks and best regards,
    Ana.

    Hello Sunny,
    The problem is still happening. I have read and apply all the threads you suggested, nut they didn't resolve the problem:
    I have updated the kernel
    I have checked table DRSEG and it has no problems.
    I don't have any syntax errors so I haven't run the SGEN as I think it doesn't apply.
    After changing the kernel I have started the sap system and the job rddexecl has started itself before running again the SPAM and reimporting the queue.
    I already have 6 support packages without running the method execution step and I don't know how much time it will consume.
    Regards,
    Ana

  • SAP Delieverd Content in Solution Manager

    Hi All,
       Like in BW, do we have any SAP delivered Business content like thing in Solution manager?

    Venkat,
    Search for this post: 
    Business Process Repository is sometimes confusing on transaction tab  
    Posted: Jan 12, 2007 5:32 PM
    The current SAP delivered content is not configured correctly and you should be aware of what you are getting before you begin.
    Mike

  • Business content for Solution Manager Service Desk

    Hi Gurus,
    Can anyone advice me on the available business content cubes and extractor for SOLMAN Servie Desk
    Your help highly appreciated
    Thanking you in advance
    BR
    Saravanan Ramasamy

    HI Saravanan,
                  For Solman Service Desk, the following objects are used :
    Cube : 0CSRV_C01
    DSO  : 0CRM_PROH
    DataSource  :  0CRM_SRV_PROCESS_H
    And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
    Regards
    Mahesh Kumar

  • ARIS + Solution Manager

    Hi,
              In my company they are planning to implement ARIS with SAP Solution Manager. I am trying to get some information regarding this. What are the benefits we get if we integrate ARIS with SAP solution manager and what are the pre-requisites to implement ARIS with SAP solution manager?
                  If you have some information about this please share with me
    Thanks and Regards,
    Sreekala.

    Hi Sreekala,
    To implement their corporate strategy and business requirements, companies need a fast and efficient way of mapping business processes and new business concepts to the SAP environment. Developing and designing a seamless value chain in terms of Business Processes Management is also a key requirement for adopting SAPu2019s service-oriented architecture (SOA).
    ARIS Business Architect for SAP and the ARIS Value Engineering for SAP method provide procedure models, methods, technologies, and reference content that make the flexible enterprise a reality. These are the first of many practical customer benefits to be generated from the strategic development cooperation between SAP and IDS Scheer.
    In SAP implementation or upgrade projects ARIS Business Architect for SAP enables enterprises to define business management requirements from a process perspective. Requirements are mapped using business process models and can be enriched with all the necessary additional information and subjected to analysis. The bidirectional interface to SAP Solution Manager enables the models to be constructed on the basis of SAP reference content for a process-based SAP solution. They can be seamlessly implemented in the SAP Solution Manager. A special BPEL interface to SAP NetWeaver Process Integration (SAP NW PI) supports end-to-end integration of existing IT systems.
    These process models therefore represent an important aid to making business decisions, while also ensuring that the required processes can be implemented in the SAP system.
    Your benefits:
    Process-oriented and model-based requirements analysis and resulting business blueprint plus alignment of business processes with the SAP IT architecture.
    Comparison and alignment of all end-to-end business processes with SAP reference processes using ARIS, SAP Solution Manager, and SAP NetWeaver Process Integration.
    Integrated ARIS method ensures transparent documentation and communication of the processes to be implemented
    End-to-end process-based tests.
    <Deleted by Moderator>
    <Message> Use of SCN as marketing tool is not allowed </Message>
    Edited by: Gourav Khare on May 3, 2011 11:28 AM

  • Problem with Aris and Solution Manager

    Hi,
    I'm trying to synchronize Aris and SAP Solution Manager.
    I'm doing installation and configuration following Administration Guide
    chap. 7 from Aris for Netweaver guide, but, I have a problem when I
    try to transfer projects from Aris to SolMan.
    In the main ARIS menu from ARIS Business Architecture for SAP NetWeaver>
    Aris Network>LOCAL>Synchronization>Maingroup, a SAPLogon screen appears
    to logon to SolMan system, ask for Client, User and PWD.
    I put the same user/pwd that I use to logon to SolMan, but ARIS cannot
    connect to, an error message appears "User or password incorrect".
    Does anyone have idea about this problem??
    Thanks

    Mariana,
    try changing your password to all CAPS in Solman.
    regards,
    Jason

  • Solution Manager 4.0 BI Reporting Content for SP13

    Hi,
    I'm looking for a listing of BI Reporting Content for Solution Manager 4.0 SP13.  I've heard rumors that standard BI Reporting content exists for the Change Request Management and Service Desk domains, but all I can find are references for system and performance report content for SP12.
    See the matrix of content listed in help.sap.com at this url... <a href="http://help.sap.com/saphelp_sm40/helpdata/en/44/1ed74368b66491e10000000a1553f7/content.htm">SP12 SolMan BI Reporting Content from help.sap.com</a>
    Any guidance for standard BI reporting content for SolMan Change Request Management or Service Desk domains would be appreciated.
    Thanks,
    Josh

    I was on session LCM264 - Reporting and Performance Analysis Using SAP NetWeaver BI at TechED and there was no talking about Change Request Management or Service Desk reporting.... This doesn't mean it's not available but I have never heard about it...
    I'm setting up Performance Analysis right now and it is working really fine.
    /Mikael

  • Solution Manager project export / import

    Hi,
    is there any possibility to export the project files from Solution Manager, change some data in an other program and then import them back to solution manager? This whole import/export process should work automatically.
    The entire thing is to avoid that the users have to work with the Solution Manager instead of their usual and well known programs for project management.
    Regards

    Hi Andreas,
    Currently there is no possibility to perform this.
    kind regards,
    Fabricius

Maybe you are looking for