Importing AVCHD from Memory Stick

Hi-
At work I've been going through the delightful experience known as AVCHD *$%!...thought I had my head around it and a plan of attack decided (sadly, I was going to suck it up and use a PC, so I could drag and drop files) when I relized my PC didn't have the power.
So, now I'd like to use the memory stick that my Sony HDR-SR12 recorded onto and Log & Transfer the footage into FCP, but I'm having a problem: It recognizes the video files, but when I go to transfer, it quits about halfway through. The note in the transfer log says 'no data'. Is this because it's not possible to transfer from a memory stick, or am I overlooking something?
Some background- I'm trying to set up a system for recording presentations in a number of our offices and we don't want to send cameras back and forth across the country. We thought memory sticks would be better/safer to send around. Some of our presentations can be long, so we wanted to get away from tape with its recroding limits.
Thank you so much for any tips!
dmart

Yea I hear you, i have both formats in HD the AVCHD the later...I thought wow this should be a easier way ...NOT!!!!

Similar Messages

Import files from memory stick on Sony CX-100

Hi, I have several CX-100s and two iMacs - having the same problem with both. I have borrowed a memory stick from one CX-100 and put it in another (both PAL). I can view the footage on the memory stick through the camera, but when I connect the camera to iMovie, it will only view/import the old footage filmed on the other camera. The footage is definitely on the memory stick, but it's as if it's in another chapter on it or something? Has anyone seen anything like this before or know a method I can retrieve this footage into iMovie? Thanks in advance.

Have you recorded any SD (MPEG-2) clips on the memory stick on the other camera? If so, you have to first erase the SD content before iMovie will recognise the HD (AVCHD) content. This assumes of course that you have recorded in HD format on the camera you are now trying to connect. If it is SD format you should be able to access it through iMovie.
This Apple support article spells things out:
http://support.apple.com/kb/HT1793
Although your camera is not mentioned in the article, the same principles apply. Your camera is listed in this iMovie '09 Camcorder Support article, which shows a link for your camera to the above support article: http://support.apple.com/kb/HT3290#2
If this doesn't help, try connecting to iMovie using a card reader, rather than connecting the camera.
John

Can't import AVCHD from Canon F10 into FinalCutPro 6.0.4 via USB

Can't import AVCHD from Canon F10 into FinalCutPro 6.0.4 via USB. When opening Log&Transfer in FCP, no files show up (the Log&Transfer window do not seem to recognize the files on the camera). The camera shows up in Finder, though. - Do I need a driver?

sorry, of course USB is available for L&T, I use it every Friday so I should know better, I got two replies mixed up completly so thanks for correcting my mistake.
what I meant to suggest was if the camera does not show in finder or in L&T check the camea menu setting is set to connect to the hard drive and not from the camera or memory card.

How to Export data to memory and Import data from memory?

hi
I have the follwoing some code of program.
The data is not filled from memory. I have to find what is the wrong in code.
REPORT ZIFT_TEST1..
SELECT-OPTIONS : so_budat FOR bkpf-budat,
sd_saknr FOR ska1-saknr.
EXPORT so_budat TO MEMORY ID 'ZBUDAT'.
EXPORT sd_saknr TO MEMORY ID 'ZSAKNR'.
SUBMIT ZIFT_TEST2 AND RETURN.
REPORT ZIFT_TEST2..
SELECT-OPTIONS so_budat FOR bsis-budat NO DATABASE SELECTION.
SELECT-OPTIONS: SD_SAKNR FOR SKA1-SAKNR MATCHCODE OBJECT SAKO.
import so_budat = so_budat from memory id 'ZBUDAT'.
import sd_saknr from memory id 'ZSAKNR'.
Regards
Iftikhar Ali
Islamabad.

Program1----
REPORT demo_program_rep3 NO STANDARD PAGE HEADING.
DATA: number TYPE i,
itab TYPE TABLE OF i.
SET PF-STATUS 'MYBACK'.
DO 5 TIMES.
number = sy-index.
APPEND number TO itab.
WRITE / number.
ENDDO.
TOP-OF-PAGE.
WRITE 'Report 2'.
ULINE.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'MBCK'.
EXPORT itab TO MEMORY ID 'HK'.
LEAVE.
ENDCASE.
Program2----
REPORT demo_programm_leave NO STANDARD PAGE HEADING.
DATA: itab TYPE TABLE OF i,
num TYPE i.
SUBMIT demo_program_rep3 AND RETURN.
IMPORT itab FROM MEMORY ID 'HK'.
LOOP AT itab INTO num.
WRITE / num.
ENDLOOP.
TOP-OF-PAGE.
WRITE 'Report 1'.
ULINE.
end of program 2----
Now you copy this programs with same name as i mentioned and execute demo_programm_leave Program.you will understnad clearly.
Notes::: A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.

Plz explain - IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM' ?

Hello,
Very good evening!
Can any one please explain me what this satement do.
Please explain me.......
IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM'.
Any suggestions or information will be appreciated.
Regadrs,
KIttu

Hello,
Thank you for your response and time!
Points rewarded...
Have a good day!
Regards,
Kittu

Import term_rgdir from memory id rgdirid

Hi
SY-SUBRC of Following statement is 4
import term_rgdir from memory id rgdirid
Could you please suggest me what needs to be done to rectify this issue.
Regards
Sri

Either you did not export it properly or you will need some variable to import into; please see sample code below:
Program for Export
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
gv_flag = 'X'.
Export gv_flag from gv_flag to memory id id.
Program for Import
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
Import gv_flag to gv_flag from memory id id.
If gv_flag eq 'X'.
Endif.

IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

Can you please explain what the following syntax is doing .
IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

Hi,
Letu2019s take a scenario where we need an internal table which is in program (letu2019s say Prog_name) which contains some Employee verification data in respect of one personnel no. Now our requirement is to use the same internal table in our program, so we will first export the personnel no to a memory id.
Passing value of perner to Memory ID u2018Memo1u2019
Export pernr to MEMORY id 'Memo1'.
Now submit to the program
Submit Prog_name AND RETURN .
Now we are importing u2018it_tableu2019 from Prog_name based on the value of pernr
Import it_table from MEMORY id 'ABC' .
Now we have to add Export parameter code in target program (Prog_name).
INITIALIZATION.
import pernr from memory id 'Memo1' .
After the internal table is appended we need to export it to again memory id (Memo1)
END-OF-SELECTION.
export it_table to memory id 'Memo1' .
Thanks,
Krishna

Memory Limit for "IMPORT/EXPORT from MEMORY ID" statement

Hi All,
Can anyone tell me whether there is any memory limit exists for "IMPORT/EXPORT from MEMORY ID" statement.
Like may be we can transfer xx MB of data via this......or it is open, we can transfer any amount of data to ABAP memory via this.
Regards
Munish Garg

1. Each user sessions have external sessions and each external sessions have internal sessions.
2. The programs being executed in the internal sessions can access ABAP memory
3.ABAP memory is a storage area for internal program variables like fields, structures, internal tables,,They can be passed between internal sessions of an external session.
4. you can transfer data through ABAp memory using IMPORT and EXPORT statements
5. after IMPORT FROM MEMORY ID <id> , you can use sy-subrc to check the existance of the cluster ID. here sy-subrc is not used to check whether the Import was successful or not.

IMPORT itab FROM MEMORY ID - doubt

Hello all,
In my program I am using the statement like given below.
IMPORT ITAB_TDR FROM MEMORY ID 'PPI'. I am getting Sy-subrc = 4.
The reason might be either Unable to import data objects or The ABAP memory was probably empty or The contents of all listed objects remain unchanged.
Now my question is-> How to store the data in the ABAP memory so that I can get the datas in ITAB_TDR in my import stmt.
Thanks in advance,
Balaji

JUST CHECK RPR_ABAP_SOURCE_SCAN REPORT IN SE38 AND GIVE THE STRING THERE IT WILL SHOW THE REPORT NAME. OR JUST PUT ABAPSOURCESCAN IN SE38 AND PRESS F4. IF IT IS A Z PROGRAM THEN GIVE PROG NAME AS Z*.
IF YOU GET THE PROG NAME THEN YOU HAVE TO RUN THAT PROG TO EXPORT THE VALUE IN MEMORY ID.
AFTER THAT ONLY YOU CAN USE IMPORT.
REGARDS
SHIBA DUTTA

Transfer file from memory stick and add as Attachment to email

How to transfer file from memory stick to email attachment? I would like to send the whole folder. Plz help. tks!

I think you should use the winzip freeversion to zip the folder and attach the same to mail and send them to yr receipents.
http://www.winzip.com/mac/en/product_overview_mac.htm
regards

How do I import AVCHD from my Panasonic Camara to iMovie '11?

How do I import AVCHD from my Panasonic Camara to iMovie '11?
I know i did it once and for the life of me I cannot remember how! I do not remember getting any additional software... i am pretty sure iMovie '11 can do it on it's own. I have a Panasonic Camera that takes movies in AVCHD.
Looks like it is in a .MTS format. HELP! Please...

• connect device via usb
• set to on/play
• select in iM 'import from camera'

After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!

I have bought Premiere three days ago. I am working on a AVCHD project, with clips from a Sony FS700 (1080 50p), and clips from a Sony CX730 (1080 25p). I can import the clips but for the CX730 clips it is impossible to put them on the timeline!!!!!
I can put the audio (5-1) on audio 4, but impossible to put the video... Everybody told me that Premiere support all the codec on the same project... It is not true!!!
Why????

Yes! you are right, every thing work well now!! Thanks a lot!
With my best regards.
Eric Dragesco
Chalet Capercaillie
Route des Renards 57
CH - 1882 - Gryon
Tel : 0041 24 498 33 48
Tel : 0041 79 244 47 11
Email : [email protected]
Web : www.ericdragesco.com
Le 3 avr. 2015 à 13:48, Ann Bens <[email protected]> a écrit :
After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!
created by Ann Bens <https://forums.adobe.com/people/Ann+Bens> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/7401902#7401902>
are you sure the track are source patched?
v1, etc on the very left of the timine
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7401902#7401902 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7401902#7401902
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Pro by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 81>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Imported AVCHD from canon hg10 looks distorted?

Hi,
I import AVCHD from my canon hg10 with the correct setting, but once imported the footage is distorted.
Any ideas why I'm getting this problem?
The same footage imported to iMovie plays back fine, just in premiere pro CS5 it appears distorted.
Incase this is helpful, my set up is:
- Mac Pro 8 Core
- Apple LED Cinema Display 27"
Thanks!

>what import settings
2nd post for NEW ITEM pointer http://forums.adobe.com/thread/770072?tstart=0

Can't import AVCHD from camcorder Error C0000005 at address:0

Every time I try to import any files from my camcorder I get a fatal error saying it can't import anything with an error code C0000005 at address 0. This is just the trial version as I'm trying to see if it will do what I want and so far I can't get it to so anything. PC is a Core I5 with 4gb ram and 200gb free drive space on Windows 7 64Bit. I don't like the Sony software so I was hoping this would do it. thanks for any ideas.

subysti
This is what I want you to try. I am assuming that you are in a NTSC area. Correct the following for PAL area if necessary.
Copy your AVCHD Full 1920 x 1080i (I am assuming recorded at 30 frames per second or designated 60 fields per second) with its 5.1 channel sound to your computer hard drive.
As you open Premiere Elements, set the project preset (new project dialog) = NTSC AVCHD Full HD 1080i30 5.1 channel.
Using Premiere Elements' Get Media/Files and Folders, bring the video from the saved hard drive location into the Premiere Elements Media/Timeline.
If you are not 100% sure of the quality in the Edit Mode Monitor, you could:
a. try right clicking the video on the Timeline, selecting Field Options from the pop up list, and then see if checking Reverse Field Dominance improves the quality of what you are seeing in the Monitor....I suggest that because I think that you probably recording to a memory stick.
b. render the Timeline by pressing the Enter key of the computer main keyboard to get the best possible preview of the end product
Assuming that is a "go" and after completing your edits, head over to Create Menus. Do that. But, remember, because you have selected a HD project preset, the only DVD menu templates that will be available to you will be HD ones (and you are heading for a DVD-VIDEO widescreen). But, continue nonetheless. Let us see what it will look like.
After Create Menus, preview the menu buttons and the video there. If OK, continue to Share/Disc/Disc and burn to disc (do not get tempted into burn to folder or fall into ImgBurn just yet). In the burn dialog, set the preset for NTSC_Widescreen Dolby DVD that will give you DVD-VIDEO widescreen 16:9. In that same burn dialog, make sure that you have a check mark next to Fit Content to Available Space. When you have your DVD disc in the DVD burner tray, you will see a Quality area in the burn dialog. It will display values for Space Required and Bitrate. If the Bitrate is less than 8, the quality may be impacted because the program is having a problem fitting your content in the space required. But, keep moving forward and hit Burn.
Next, play that back on your TV DVD player and see what that looks like. I have gotten some pretty great results taking a AVCHD 1920 x 1080 to DVD-VIDEO 720 x 480 Widescreen playback on TV DVD Player. More details on that later. By the way, Premiere Elements does not offer Dolby Digital 5.1 channel sound for the export, just Dolby Digital Stereo. No Dolby Digital 5.1 channel sound even for BluRay.
I will be watching to see how you do.
ATR

Cannot import AVCHD from Sony SR-7 into iMovie 09

Well - looks like I join the ranks. I can no longer import HD format movies from my Sony SR-7 into IMovie 09 since I upgraded to version 8.0.5. Does anyone know what happened? iMovie 09 worked beautifully until the upgrade. I can import SD and digital photos just fine. iMovie 09 (8.0.5) no longer "sees" the HD files on the camera. I'd really appreciate some help here.

Hi sblackatc - and welcome to Discussions!
I have the same camera which works perfectly with iMovie '09 version 8.0.5
iMovie '09 will not recognise HD (AVCHD) footage if you also have SD (MPEG-2) footage on the camera. You must erase all SD video from the camera, after archiving/importing it to your Mac. The camera will then be able to see your HD video. See this Apple article:
http://support.apple.com/kb/HT1793
If this is not the problem try this:
After connecting to your Mac via USB, open the LCD monitor on the camera. It should show a menu page labelled "USB Select". On this menu touch the item labelled "Computer" with the hard disk icon (not the memory stick icon). The camera will then show that it is connecting with the computer. Wait a while for iMovie to connect and generate the thumbnails for each clip. You should then be able to import and/or archive all clips on the camera.
Hope this helps!
John

Importing AVCHD from Memory Stick

Similar Messages

Maybe you are looking for