Importing .avi files and PE7 turns them into audio files...

Why does it do this and what do I need to do in order to have PE7 treat them as regular video files for editting?
(I'm using Downloader to pull videos from youtube and import them into PE7 to produce a disk.)

First, do not worry, PrE7 has not harmed your files. It is just that it can only get to the Audio portion of those files, so that is all that it can display. They are still intact.
Now, with many file formats, and AVI in particular, much can be inside that file. This ARTICLE will give you some background.
With just the Audio coming through, my guess would be that the files are encoded using either DivX, or Xvid, as this is a very common problem. You can check this out with G-Spot, also mentioned in the linked article.
If the files play on your computer, then you likely have the necessary CODEC, unless you're using MediaPlayer Classic or VLC Player, as they have their own CODEC systems.
Steve's advice to convert these files is the best course of action. You may need to get the CODEC and install it (again, G-Spot will tell you exactly what you will need and if its installed on your computer). I do not know if Prizm has its own CODEC's but would assume that it uses those installed on the computer.
Good luck,
Hunt

Similar Messages

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)

It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues.

Importing avi files into jsp pages

hello all. im new to jsp and java. i would like to know how i could import .avi files from my MySQL database (where ive given paths for the avi files) into a jsp page. i am basically trying to make an application that allows users to select particular video files and play them. the user has the ability to upload and delete these videos

newbie4337 wrote:
im sorry i guess i didn't phrase that properly. i meant to say that i had saved the paths in the database If you have some saved URLs in the database (URLs to where these avi files can be found)
you just need to retrieve the URLs and use them when generating links (<a href="..."></a>) in the html produced by your JSP.
You have already given the paths in the html generated by your jsp? Paths as in URLs?
Then you must already have a servlet deployed that accepts HTTP requests for .avi URLs and reads the relevant .avi from the database and serves back an avi stream with the right mime type (video/x-msvideo) in the headers...
([w3schools|http://www.w3schools.com/media/media_mimeref.asp]).
could you give me some more info on that?If the URLs are hosted somewhere else you do not need any of this.

I have a CanoScan Lide 700F scanner ,how do I scan Black and white neg.and turn them into positives?

I am scaning all old pictures, docts, slides ,but I have alot of b&w negs verious sizes, how can I turn them into b&w positives??

Hi Teddy.
The MP Navigator EX software that was bundled with your CanoScan LiDE 700F can be used to scan your black and white negatives. To use the MP Navigator, please follow these steps:
1. Start MP Navigator EX and open the Navigation Mode screen.
2. Point to Scan/Import and click Film.
3. Place the film on the Platen.
4. Click Specify... to set the document size and scanning resolution as required.
5. When setting is completed, click OK.
Important
Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again.
Note
To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box.
6. Click Scan. Preview scan starts. When preview scan of the film is completed, the preview image appears.
Important
If a message for calibration appears, remove the film, then place the Film Adapter Unit over the first frame of the Film Guide and click OK.
7. When the calibration is completed, follow the on-screen instructions to load the film into the Film Guide, then click OK.
Note
Preview image does not appear when the Preview before scanning checkbox is not selected in the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
8. Select the checkbox of the frame and click Scan. When scanning is completed, the Scan Complete dialog box opens.
9. Select Scan or Exit. To scan another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select Exit to end.
The scanned images appear in the Thumbnail window.
10. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc.
Note
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
11. Save the scanned images.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Importing AVI files into Final cut creates a pop

How can I stop getting a popping sound when I import AVI files into Final Cut. I figured it must be the type of file itself but I cant seem to find a free converter to convert my AVIs into what ever is need (which is what? .mov files?)
Please help

The very basics of non-linear editing is to know what video and audio codecs your particular NLE works with natively. FCP works with many video codecs but only a few audio codecs. Typically it works best with AIFF at 48khz, 16 bit.
You can find out all the various native codecs and formats in the User's Manual, Help Files or by looking through the Easy Setup list.
FWIW, both AVI and MOV are not really codecs at all; they are both merely containers that could contain video and audio made from any number of codecs. So saying you have an AVI file or a MOV file is kind of like saying you have a car ... it doesn't really tell anyone much at all.
Both QuickTime Pro and Compressor (which you most likely already have installed) should be able to convert to a native codec for use in FCP.
-DH

I'm trying to import avi files to FQP - why does it not work? I've tried DVX-converter and Perian without any luck.

I'm trying to import avi-files to FQP without any success. I'vw tried to convert it with quick-time and insalled Perian, with no luck. I'm new to FQP...

FQP??
Never mind. Open one of your .avi files in QuickTime Player.
Press command and i keys to get the Inspector window.
Tell us what it says next to Format.
avi is just a container, we need to know the codec that was used to make them.

Pages 5.2 - When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?

When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?
Any Help?I know the update has only been out a while but if anyone has an idea why it is doing this, please let me know!

But you are telling me something I already know.
Be precise.
It is not Pages '09 that is broken.
I am back in Mavericks and testing Pages 5.2.
There are improvements, we shall see how useful, but in less than a minute I have already discovered bugs.
Peter

I am creating a request for proposal form and I need to add a commission structure field. I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew

My imported avi file plays in slow motion and staggers. what do i need to do to correct ?

My imported avi file plays in slow motion and staggers. How do i fix this ? I am newbie, just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second

You can update the latest drivers for Nvidia Card.
Try to run composition panel at a lower resolution .
Refer to this link .

Can't import .AVI files in QuickTime Player

Hi there - Okay,,I'm a real Noob,,but I can't understand why I can't import .AVI files when apparently I should be able to. I have just purchased a Toshiba Camelio S20 and have taken some test movie shots and when I've tried to open them in iMovie or just open them in finder I get the following message
'The document “IMAG0002.AVI” could not be opened. The movie is not in a format that QuickTime Player understands.'
The Quicktime player I'm using is Version 10 and I'm working with MacOS X V 10.6.4.
What am I doing wrong ?
Pls help ?
Thanx

Heya - thank you so much - have done what you suggested and now i can import the clips into iMovie - no problem!
But,,,,and,,golly,,don't know if I'm being really really stupid but by converting to DV or MOV I lose all audio from any of the clips that I'm importing...
Can you help some more - sore to be pain in buttocks !! Am completely new to iMovie so am struggling a bit!!!
Thanking you

How import AVI files to my I Mac for editing in Final Cut?

How import AVI files to my I Mac for editing in Final Cut?

You first convert them to ProRes with Compressor or MPEG STREAMCLIP, then import the ProRes files into FCP. FCP doesn't work with the AVI container...footage must be Quicktime, and must be in a codec FCP works with.

Importing AVI files

Hello. I've just switched over from the dark side to Mac and I need some help using FCE. Here are my basic questions:
1) Best settings/method for importing AVI files from a hard disk?
2) Best export settings for high quality use in powerpoint and/or DVD/CD?
Now for a little more info...
I work with athletes in the areas of sport science and performance. I have tons of video saved on multiple hard drives in AVI format that we did video analysis of technique using DartFISH. They were originally captured with good quality digital video cameras via DartFISH as AVI files. These are large files and high quality video (200-300 MB for a 1 min clip) .
RIght now, if I choose "import: from file" I get a message saying the clips are not optimized for FCE and I should recapture them. Unfortunately, all I have are the files on HD and not the original tapes, etc.
What is the best way to import the AVI clip files into FCE for editing? Settings, etc. Do I need to convert to a Mac-friendly format first with a third-party app like QuickTime Pro, VLC, MPEG StreamClip? Use iMovie?
My overall goal is to not lose quality/suffer degradation of the clips in the conversion, edit, export process. I'm not that concerned with file size, but I also don't really want to go through 3 or four steps and create multiple large files for the same clip.
My desired output is for continued work with athletes so they can take video home (DVD or CD of clips) to review and academic presentations (powerpoint). So seeing fine detail in the clips is important. An edit/output set-up that I will use a lot is merging two clips to play in a PIP, side-by-side, or overlay format. i.e., athlete A with perfect form on the left, athlete B with flaws on the right and the clips play simultaneously as one final output movie.
Is the basic Quicktime export function the best for my needs?
I've got a decent background in computers and basic video editing. Clip splitting, marking in/out, timeline, transitions, and other edit functions are no problem. My main area of weakness is all the different video formats, codecs, compression options, and other similar settings. There weren't many of those types of choices in my old system. I've produced some movies with FCE already, but the quality in the videos dropped from the original clips to final output.
Thanks,
TD...

Tom--
Thanks for the response. Using MPEG Streamclip solved my import problems. Using the default DV25 compression seemed to yield a file of similar size to my original AVI files. Is there much benefit in using the DVCPRO25 or DVCPRO50?
I'm still having some troubles with export format settings. Using the default Quicktime movie export, the finished clips looks to be fine in Quicktime. But using the .mov clip in Powerpoint yields some degraded quality. The picture appears to have "lines" and generally looks less crisp/clean. I thought this might have been just some Microsoft flaw in the Powerpoint movie engines, but I tried the same thing in Apple Keynote and got the same result. I have some screen shot image captures I could send you, but not sure how on the discussion board.

CS4 premiere Imported .avi files play too fast

Hi Guys
I have a problem. I'm new to CS4 having used Adobe Premiere 6.0 in the past and I have never had this issue when importing .AVI files. What happens is that the file play fine in my windows enviroment and on all my players VLC,DIVX, Windows media player.
But as soon as I import these files into my project at 29.97 frames the video plays really really fast and the sound plays at the normal rate. If I try to change the frame rate the sound also changes. Now here is the strange part. If I convert the files to MP4 they play fine! but the quailty of the video takes a massive hit as you know.
I tried to convert the files to .MOV, MPG (which the program won't play) and most other types of video files but MP4 seems to be the only one that works! When I really want the higher quailty .AVI. Again the files play fine outside of CS4 Premiere and I have already converted them from a Panasonic AVCHD encode format.
Please if anyone has any advise it would be great as I have to get this sorted for a x-mas present!
Richard
Running
Windows Vista Ulimate
4GB RAM
Quad core Intel chip
CS4 version 4.1.0

First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link
PS you are in the wrong forum http://forums.adobe.com/community/premiere/premierepro_current

How can I move all my bookmarks from different Firefox profiles into one area to organize them and then place them into the different Firefox profiles?

How can I move all my bookmarks from different Firefox profiles (would like to move whole bookmark folders at once if possible) into one area to organize them and then place them into the different Firefox profiles? This is all under one window user account, I am using windows 8.1. Even if you have information on how to do it on a different windows, it may still be helpful. Thanks for any input you have.

Just a note about the difference between these two things:
* "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
* "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
Related support articles:
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Import Bookmarks from a HTML file]]
* [[Restore bookmarks from backup or move them to another computer]]
Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites].

Problems in importing avi file

I have problems\ in importing avi file..
when i try to import an avi file,, it is written that there is a message "unsupported format or damaged file"..
What should I do then?
I use Windows Vista Ultimate..

Welcome to the forum. As Harm points out, AVI is but a wrapper, and can contain all sorts of data inside. This ARTICLE might give you some insight into working with AVI's.
Good luck,
Hunt

Importing .avi files and PE7 turns them into audio files...

Similar Messages

Maybe you are looking for