Importing .avi (to convert to .dvd and burn)

I downloaded a 350 MB avi file using a bittorrent client. After installing the DivX codec, I had no problem playing the .avi file on Quicktime.
What I'd like to do is play the .avi movie on my tv. I figured the easiest way to do this would be to burn a dvd.
I read on another forum that I could convert the .avi file to dvd with iMovie and iDVD. The first step is to import the .avi file to iMovie. I did this and it took a couple of hours. There's no problem playing the newly created iMovie project on iMovie... but... It's HUGE!
My imported 350 MB avi file has exploded into a 10 GB iMovie Project! Holy smokes! Is this supposed to happen?
This avi file contains DivX 6.0 video and MPEG Layer 3 audio.
BTW, is there anyway I could play the movie using Quicktime on my television? What would a need to connect my iBook to the tv?
Sorry if I'm in the wrong group, but my problem started with iMovie. Also, should I upgrade iMovie? I'm using 5.0.2.
Thanks very much.

Hello mistymerit,
My imported 350 MB avi file has exploded into a 10 GB iMovie Project! Holy smokes! Is this supposed to happen?
Absolutely. DV has a file size of roughly 13 GB per hour of video. Your file size indicates around 45 min of video, which is perfectly fine for burning to DVD: a DVD holds a maximum of 120 min of video (incl. menus).
If you create a DVD with iDVD, the software will compress the DV video to MPEG-2 and thus fit your movie onto a (4.7 GB) DVD - it doesn't care for the original file size, only the length counts.
To burn your movie to DVD, simply create a new project in iDVD and choose a menu theme. Now import your iMovie project by choosing File > Import > Video from the menu.
For more info on iDVD 5 have a look at this tutorial:
http://www.kenstone.net/fcphomepage/idvd_5stone.html
Another suggestion:
iDVD is NOT a disc burning app, so leave that work to software designed for it. Instead use iDVD's "Save as Disc Image" option (File > Save as Disk image). This creates an .img file on your HDD, that can be stored for future use and gives you the option to preview your DVD on your Mac before burning to disc.
Use Disc Utility or Toast to burn your DVD at slow speed. 4x is acceptable, 2x (... or even 1x) is better.
hope this helps
mish

Similar Messages

I am using Toast 11 to burn dvd's. With FCP10.1.3 I could go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn. How can you do this with FCP 10.1.4?

I am using Toast 11 to burn dvd's. With FCP10.1.3 I used to go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn. How can you do this with FCP 10.1.4?

BenB it creates a disc image only and it's not in .m2v. I think it saved it as an Apple Pro Res 422 format instead. The disc image file format will not allow
Toast 11 to create menus etc. Thanks for your help.

Full Guide: How to convert any DVD and videos to iPod Touch/Classic/Nano

This full guide includes four parts.
(1) How to Crack DRM video and audio files
(2) How to Rip a DVD to put it on iPod/iPhone 3G/PSP/Zune/Sansa View/iRiver……
(3) How to convert and burn WMV/AVI video directly to DVD
(4) How to transfer video/music from iPod to computer
Part 1: How to crack DRM video and audio files
Daniusoft Digital Media Converter Pro(http://www.topsevenreviews.com/daniusoft-digital-media-converter-pro.html) software is the quickest and easiest solution to remove drm from WMV, M4V, M4P, WMA, M4A, AAC, M4B, AA files by quick recording. You can use this professional tool to crack drm and put them on your iPod/iPhone 3G/PSP/Zune/Sansa View/iRiver……
The process is as follows:
Step 0: Download Daniusoft Digital Media Converter Pro(http://www.topsevenreviews.com/download/video-music-converter/daniu-digital-media-converter-pro.exe), install and run it.
Stpe 1: Run the software and click “Add…” button to load WMA or M4A, M4B, AAC, WMV, M4P, M4V, ASF files
http://www.topsevenreviews.com/guide/how-to-convert-drm-protected-music-movie/digital-media-pro-n2.jpg
Step 2: Choose output formats. If you want to convert protected audio files, please select “Convert audio to” list; If you want to convert protected video files, please select “Convert video to” list.
Stpe 3: You can click “Settings” button to custom preference for output files.
Click “Settings” button bellow “Convert audio to” list for protected audio files
http://www.topsevenreviews.com/guide/how-to-convert-drm-protected-music-movie/audio-output-setting.jpg
Click “Settings” button bellow “Convert video to” list for protected video files
http://www.topsevenreviews.com/guide/how-to-convert-drm-protected-music-movie/video-output-setting.jpg
Step 4: Start remove DRM and convert your DRM protected music and videos by click on “Start” button.
Part 2: How to rip a DVD to put it on iPod/iPhone 3G/PSP/Zune/Sansa View/iRiver……
With Aiseesoft DVD Ripper you can rip and convert any DVD to most popular videos supported by your iPod, iPhone 3G, PSP, Zune, Sansa Video and other portable devices.
Step 0: Download Aiseesoft DVD Ripper(http://www.topsevenreviews.com/aiseesoft-dvd-ripper.html), install and run it.
http://www.topsevenreviews.com/image/aiseesoft-converter-suite/dvdripper-n2.jpg
Step 1: Click “Load DVD” button to load your DVD.
Step 2: Select the output video format you want from the “Profile” drop-down list.
Step 3: Click the “Start” button to start your conversion and In a short while it will be finished.
Tips:
You can also use the powerful editing funtion (Snapshot, Merge, Effect, Trim, Crop)to edit your DVD.
Part 3: How to convert and burn any video directly to DVD/VCD/SVCD
With Cucusoft DVD/VCD/SVCD Creator Pro you can burn any AVI/WMV videos to DVD.
The process is as follows.
Step 0: Download Cucusoft DVD/VCD/SVCD Creator Pro(http://www.topsevenreviews.com/cucusoft-dvd-creator-pro.html), install and run it.
http://www.topsevenreviews.com/image/burndvd-n2.jpg
Step 1: Choose the “To DVD” button and click "Opne/Add" button to import WMV/AVI files to convert WMV/AVI to DVD.
Step 2: Select Merge or Batch function.
Batch Function, Support converting multiple files to DVD VCD SVCD MPEG1/2 at the same instance
Merge/Join function, Support selecting several clips from different sources and combine them into one single output
Step 3: Set your preference to burn WMV/AVI to DVD.
Step 4: Click "More Advanced Settings" button to set advanced settings for your files.
Step 5: Choose the “Output Folder” and Click “Convert & Burn” button to start.
Part 4: How to transfer video/music from iPod to computer
With Aiseesoft iPod to Computer Transfer you can tranfer or backup your videos and songs to your computer.
Step 0: Download Aiseesoft iPod to Coumputer Transfer(http://www.topsevenreviews.com/ipod-to-computer-transfer.html), install and run it.
http://www.topsevenreviews.com/image/ipod-to-computer/connectipod-n2.jpg
Step 1: When you connect your iPod to the computer via USB cable and run the program, the program will detect and recognise your device automatically.
Step 2: Then from the file list, you can choose the audio or video files that you want to transfer and a detailed list will be displayed at the right for your to choose.
Step 3: Choose the songs you want to transfer and then click the "Start Transfer " button below the list to begin transferring files from iPod to computer.
Step 4: In a short while your conversion will be finished
Hope the guide collections can be helpful for all of you.
Mac Video Converter(http://www.macsoftreviews.com/iskysoft-video-converter-mac.html)
Best DVD Ripper(http://www.topsevenreviews.com/)
iPhone Ringtone Maker(http://www.macsoftreviews.com/aiseesoft-iphone-ringtone-maker.html)

Use Automator. QuickTime is Automator compatible. However, you will first need to download the "iPod" script from the Automator web site. For a tutorial and instructions, download Brian Gary's "Automator for the People" Ripplecast from the iTunes podcast area.
2.0GHZ G5/533MHz G4 DeskTop/400MHz G4 PB Mac OS X (10.4.3)

Best video Hardware/software for converting VHS DVD and others on Mac?

Hello,
I am having problems finding some much needed details on what the best software/hardware is for converting video formats on a Mac. I should note I am using a NEW iMac 4GB memory and Leopard OS so what I use needs to be compatible. Perhaps next year I will get a Mac Pro, but for now I'm using this setup. Here's is what I need to do:
1. Transfer old VHS tapes (home movies and such) to DVD. I need to be able to use DL DVD discs for my recordings so I don't have to switch DVDs. In other words make them just like the DVDs you play that you buy. Therefore, they also must be able to playback in home theater DVD players, not just on the computer. I would assume the best way as for encoding is to get the VHS tape in digital format on the hard drive, then use the codecs to turn them into DVDs?
2. Once on the hard drive I also need to convert them to a format neutral playback on both the Mac and PC. What is the best, MPEG 4?
3. The ability to do some nice editing of making bookmarks, chapters and thumbnails for the DVD menu and divisions I wish to make. In other words, if I have a home movie containing my Summer and Winter vacation, I want to insert bookmarks at points to skip to like in a movie DVD and also have a thumbnail of it just like DVD movies does.
4. A nice MAIN menu for the DVD that will let me hit the main categories, not just chapters for the TOP level DVD menu. Such as Summer Vacation, Winter vacation.
5. The software should be easy to use so I don't have to take a HUGE crash course requiring lots of work making the project a chore. Also, I don't want or need a professional package, just something simple that is less than $200 per software program. Not the expensive $500+ software options for movie makers.
Thank you for any tips and advice on this matter.

"Best software/hardware" depends on your exact needs & wants.
One simple way to transfer your VHS tapes to DVD is with a *DVD Recorder*. Many of these come with VHS and DVD decks already built in. Insert your VHS tape, a blank DVD, hit record and off it goes. When finished, you have a playable DVD.
To transfer your VHS tapes to DV for editing you will need a converter. The *Canopus ADVC-110* is a very nice, relatively inexpensive device that will do that job for you. (It's also possible to use most modern DV camcorders as converters, too.) You would connect your VHS deck to the Canopus box via their analog video & audio connections, then connect the Canopus box via FW to your Mac, and then when you play the VHS tape you would capture the video in iMovie or FCE.
Once your videos are captured on your Mac, you could use iMovie or *Final Cut Express* to do whatever editing you might want to do. Regardless of which one you edit with, however, it's iDVD that you would use to create your DVD menus and burn your DVDs.
So, overall, the workflow would be like this: *VHS Deck > Converter (camcorder or converter box) > Capture on Mac (iMovie or FCE) > Editing application (iMovie or FCE) > iDVD > DVD*
For playback on computers MPEG4 would be an ok choice, H.264 is probably a better choice, and then there's the matter of whether or not you want to export as a QuickTime movie and/or AVI.
iLife came with your Mac, so you already have iMovie and iDVD. How about giving them a try before you consider investing in a significantly more sophisticated application like Final Cut Express. (just my opinion)

Imported RAW files convert to black and white

I have LightRoom 1.4.1 as well as LightRoom beta installed.
Intel iMac 20, OS 10.5.2
Camera is Canon 40D.
I imported images from a Compact Flash card into LightRoom beta. They downloaded as they should, but then without my touching mouse or keyboard they, in random order, changed from color images to black and white. I deleted them all, exited the beta, imported the same images into LightRoom 1.4.1. Same thing happened.
I tried the Convert to DNG option, and they all imported as black and white without a preliminary color mode.
There are no develop steps set in the import dialog.
I imported them using the Canon import program, and they remained color images as they should. However, if I located them with the finder, though Preview showed them in color, Open With Lightroom or Photoshop CS3 brought them up as black and white.
I'm stumped.
There were several jpeg files on the same CF; they imported and behaved as they should.
Arthur

So I downloaded all the upgrades and re-installed them; rebooted, murmured incantations, re-imported photos.
Same results--black and white photos, rendering the computer and my software useless for processing.
Then I disconnected the card reader from my powered external USB hub, and plugged it directly into the iMac. All problems disappeared. Everything works as it should. Took a while to figure out, but my problem is solved.
Arthur

Homemade movies with chapters question? I have numerous VHS movies converted to DVD and then are converting the DVDs into MP4 via HandBrake. I am now trying to find the chapters within the converted DVDS with no luck using QuickTime 7. Help plz.

How do I find the chapters within a Homemade DVD when it has been converted via Handbrake to MP4 and editing ready on Quicktime Player. I want to get chapters only out of the movie that has 23 chapters so I can edit one chapter at a time. . Found it once when it said divide into chapters (or something like this) , but can't find it again. Thanks for the help.

How do I find the chapters within a Homemade DVD when it has been converted via Handbrake to MP4 and editing ready on Quicktime Player.
If you included the chapter information originally contained on the DVD as part of your HandBrake conversion, then it will be located in the "Text" track of your converted file. Did you actually check the "Chapters" tab in HandBrake before converting the DVD content to ensure the chapters were to be included in final export? I.e., not all HandBrake presets automatically include a "Text" (Chapter) track.

Export Direct to DVD and Burn?

Is it possible in LR2 to export photos directly to a CD or DVD and then burn it, rather than copy all the photos to hard drive first? If not, is it possible in LR3?

Here's what is possible in LR2:
1. Select the files you want to burn to DVD.
2. Choose Export
3. Click the gray bar at the top of the dialog that probably says "Files on Disk".
4. A pop-up will appear - choose Files on CD/DVD
5. In the "Export To" pop up (under Export Location), choose Temporary Folder.
Although this still writes files to your hard drive, it will clean up once the files have been burned to CD/DVD.

I have just had all my video converted to DVDs and now I would like to edit them...how do I import them into imovie?

Can somebody help me figure out how to import my home videos from a DVD into imovie?

That means 'reverse engineering them'!
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Importing .mov files converted from DVD

Hi
I have video which was originally shot in SD format using a Sony HDR - XR200 camera. (I need to shoot in SD format in order to be able to play back resulting DVDs in standard players) The SD footage from the camera is burned directly to DVD using a Sony DV Direct DVD recorder. I then use DVDxDV to convert clips from the DVD into .mov files. Having imported these .mov files into FCE 3.5 I get a message saying they are not optimized for FCE and should be recaptured. When I drag them onto the timeline they do show in the viewer at 29% size but I cannot see any picture on my external monitor.
Do I need FCE 4 even though I am not recording the original footage in AVCHD ? Do I need to use an Apple HD codec in the DVD to .mov conversion process?
Any advice appreciated - many thanks

Hi Tom
Converted clips are;
Vid rate 25fps
Frame size 720 x 576
Compressor DV PAL
Data rate 3.6 MB/sec
Pixel aspect PAL-CCIR 601
Forgive my ignorance but where do I get the item properties for the sequence I am editing into?

How do I import AVI video with stereo audio (and keep it that way)?

Today I just discovered that all the AVI video with stereo audio I've ever imported into a Premiere Pro CS6 project has been mysteriously converted to mono. And I can't find any import setting anywhere that enable me to change this.
Here's the deal...
I've have an AVI file with stereo audio (the file is actually a stereo sound test that I downloaded to prove that I wasn't imagining things). On my hard drive, I right-click and view the properties:
Video
Length: 00:00:36
Frame width: 320
Frame height: 240
Frame rate: 25 frames/second
Audio
Bit rate: 128kbps
Channels: 2 (stereo)
Audio sample rate: 44 kHz
I click on it to play and listen with headphones--everything is playing in the correct part of the stereo spectrum. Then, I import it to Premiere, click the file name in the left content menu, and check the properties, suddenly they read:
Type: AVI Movie
File Size: 1.1 MB
Image Size: 320 x 240
Frame Rate: 25.00
Source Audio Format: 11025 Hz - 16 bit - Mono
Project Audio Format: 11025 Hz - 32 bit floating point - Mono
Total Duration: 00:00:36:15
Pixel Aspect Ratio: 1.0
Sure enough, I drag it into the sequence, listen to it, and it's indeed playing mono. Outside of Premiere, the original source file still reads and plays correctly with stereo sound.
When I import stereo WAVs and MP3s, it keeps the original stereo channels without me having to do anything special. I even just imported the same exact file as a MOV with stereo audio, and it showed up in Premiere as:
Source Audio Format: 44100 Hz - 16 bit - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
What is going on here with AVIs? Am I doing something wrong? Are there settings I'm missing somewhere?
(And before anyone suggests I only use MOV in the future... that's not exactly the answer I'm looking for.)

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Artifacts when I import .avi file to After Effects (and Premiere)

Hi,
I'm having some issues with After Effects that I can't figure out. I've got a video file in .avi that loads and plays fine by itself, but when I import it to edit in After Effects 5.5, I get strange artifacts during playback, and they even translate to the final export. I get the same issue when I try to import and render in Premiere. I have the sequence matching what the video file is, and even right clicked the file,and interpreted the footage for the project to match the video file to be sure, but with no successes at figuring it out. Can anyone tell me what I'm doing wrong here?
I get the same issue regardless of me being on my desktop or laptop. I'm using Windows 7 on both computers.
Per the questions I should ask:
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. 10.5.0.253
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) Yes
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". Windows 7
If you are getting error message(s), what is the full text of the error message(s)? No messages.
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking? Importing and test ram preview and or rendering.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time? First time i've tried this.
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected. Intel i5 2500k 3.3GHz, 8GB ram, 64b OS, 2 monitors, 3 hard drives. AMD Radion 6900
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)? 13.12
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? No
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime". .avi
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2". yes, 7.7.5
What other software are you running? none
Do you have any third-party effects or codecs installed? none that I know of.
Are you using OpenGL features in After Effects? I think so, it's enabled.
Does the problem only happen with your final output, RAM preview, or both? both
Are you using Render Multiple Frames Simultaneously multiprocessing? no
Are you using the ray-traced 3D renderer? no
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help. 2014-11-13_1514 - Tetra84's library
Here is a screenshot of the issue that I'm talking about:
glitch - Tetra84's library
2014-11-13_1514 - Tetra84's library

See this thread on the Camtasia forums in which one of the Camtasia software engineers recommends against using the TSC2 codec for use in applications outside of their suite:
https://feedback.techsmith.com/techsmith/topics/avis_created_with_camtasia_studio_8_do_not _play_on_other_computers
I'd ask on the Camtasia forums what codec they do recommend and how they recommend transcoding your existing TSC2 files.

Auto Import feature lacking convert to DNG and move to subfolders...

Folks,
As many of you may be aware, when setting up a folder for auto import, LR 3.3 does not give you the same options as you might see in the regular import functionality. Namely, the ability to convert to RAW images to DNG on the import as well as move to subfolders is not available. This is a real bugger for me as I have a nice new Eye-Fi Pro card that I have setup to dump all images from my camera to a "watched" folder which is then imported into LR automatically. Unfortunately, auto import doesn't solve the issue for me, so I am back to doing the same old import routine I had done before which is tethering the camera back up via USB (or popping out the card and mounting it instead) and use the regular import feature.
I realize a lot of the design impetus for auto import is around tethered usage, where a photographer may want to see the images as fast as possible, but why would Adobe cripple the auto import functionality deliberately. Give the auto import the same functionality as the regular import and let the customers decide which works best for their setup. Geez!!
~David

I believe I watched a tutorial that indicated that Lightroom now downloads the raw files first and then does the conversion. This speeds up the download process and enables you to go back to my room to do other work more quickly. I cannot comment on the speed of the conversion because I don't convert to DNG. But my thoughts are that 700 raw files will take some time to convert.

Importing .avi file into Premiere CS5 and losing on quality

Hello Adobe users,
I'm having a problem with importing my material in Premiere CS5. It's file extension is .avi and I'm not sure which step I do wrong to get his but it's pretty important to me to find out what's the problem.
Every time I try to import material which was captured on another computer, I get it all lossy in Premiere and it's really obvious.
Maybe I make mistake with opening new project?
I'm not sure which camera is used, but I'm sure it's Panasonic and it films in cinemascope (widescreen).
I would really appreciate your help here!
Thanks in advance, Filip!

Flip,
Welcome to the forum.
AVI can hold all sorts of things, and those will be all important in addressing your problem. This ARTICLE goes into more detail, and shows how to "peek inside the AVI wrapper." Please let us know what CODEC is used in that file.
How are you Importing/Capturing the AVI file?
What Sequence Preset was chosen?
Good luck,
Hunt

Combo drive only reads DVDs and burned discs!

OK, so I had to wipe my harddrive and reinstall (restore) OSX 10.3 Panther.
After doing that the Combo drive does not mount any "factory" CD's.
It can mount the CD's I burned before the reinstall. It can mount DVD movies, but all program CD's & DVD's do not mount.
I have an external firewire DVD burner that mounts all these discs so the discs are not the problem.
The combo drive can read some CDs and DVDs so the optics are not shot, but the system decides not to mount!

You may want to try resetting the PMU. I had this exact same problem once where my '12 PowerBook G4 wouldn't recognize my iLife '05 DVD-ROM. Resetting the PMU caused it to be able to mount the DVD-ROM again. Here's a link to the Apple Knowledge Base Article with instructions for how to reset the PMU: http://docs.info.apple.com/article.html?artnum=14449.

How to make a copy of a dvd and burn it

I have made a dvd in iMovie sent it to iDVD and made a DVD of my project
How can I make more dvd's from this copy

I think this will answer your question:
http://www.apple.com/findouthow/movies/idvd.html#burn

Importing .avi (to convert to .dvd and burn)

Similar Messages

Maybe you are looking for