Importing box sets of multiple cds under one album listing in iTunes?

I am trying to import a box set of music cds into my PC library and have them under one album listing. Currently, each disc is shown in library with its own album cover listing.  I am trying disc 1, disc 2 & disc 3 contents listed under 1 library album.

See One cover for multi-disc album.
tt2

Similar Messages

  • I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?

    I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?

    I'd suggest you consider a cloud-based file sharing service such as Dropbox for this sort of use. iOS is not designed to be synched with more than one iTunes library at a time, so attempting to use it as you describe, connecting a single iPad to multiple computers, almost certainly won't work as you intend and is likely to cause nothing but headaches.
    Regads.

  • Advise on using DBMS_XA with multiple branches under one global transaction

    Dear all
    I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
    However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
    ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
    ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
    ORA-02051: another session or branch in same transaction failed or finalized
    This is the structure of my programs (3 SQL*Plus sessions):
    main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
    m1.xa_start tmnoflags
    m2.DML
    m3.Wait for thread A + B to manually be started and run xa_end
    m4.xa_end tmsuccess
    m5.xa_prepare
    m6.xa_commit false
    thread A: Uses xid 123|A (branch A of global transaction 123)
    a1.xa_start tmnoflags
    a2.DML -- thread A can see main and thread B's data
    a3.xa_end tmsuccess
    a4.xa_prepare -- required?
    a5.Should we also call xa_commit false?
    thread B: Uses xid 123|B (branch B of global transaction 123)
    b1.xa_start tmnoflags
    b2.DML -- thread B can see main and thread A's data
    b3.xa_end tmsuccess
    b4.xa_prepare -- required?
    b5.Should we also call xa_commit false?
    The failing steps are:
    m5
    m6
    a4
    a5
    b4
    b5
    Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
    FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
    203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
    Thanks a lot in advance.
    Cheers
    Finn

    OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
    Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
    When called from a job, xa_start throws:
    ORA-24789: start not allowed in recursive call
    on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
    ORA-25352: no current transaction
    so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
    I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
    Thanks in advance.
    Cheers
    Finn

  • How to set up multiple libraries on one computer

    How do you set up multiple libraries on one computer for itunes?

    Launch iTunes with the Shift key(Windows) or Option key(Mac OS X) held down.
    (90004)

  • Multiple Schemas under one user account with XE 10g

    Hi,
    I am using (learning) XE 10g. I would like to know if it is possible to have multiple schemas under one user account and have the schemas logically separated. As of right now, I have three schemas that I am working with, each one under a different user account. This is inconvenient, because I have to logout of one user account and login to another user account simply to be able to work with another schema.
    Thanks

    It isn't possible to have multiple schemas under one database user account. It is of course possible to grant rights to other database users, and or roles, in order to allow access to the tables/data from other accounts. In Oracle there is a one-one mapping between schema and user.
    Niall Litchfield
    http://www.orawin.info/

  • HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
    You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
    Then resync with your iPhone and all will be well.

  • Can there by multiple accounts under one id?  I just loaded a $25 gift card and it showed up in my balance.  My daughter, under the same id had $12.0 left from a previous gift card.  Now only the $12.01 shows up and the $25 is nowhere to be found?

    Can there be multiple accounts under one apple id?  My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad.  My daughter has what she believes is her $12.01 left from a gift card.  My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • The sort field is not used when ordering multiple cds in one alumn folder, how do I correct this?

    It is using the track number and not the sort order field.  The reason I have multiple cds in one alumn is because they are books on cd.

    Sorry for the typo my "b" key was not working correctly.
    The sort field is not used when ordering multiple cds in one albumn folder, how do I correct this?  It is using the track number and not the sort order field.  The reason I have multiple cds in one albumn is because they are books on cd.

  • Multiple subnets under one vlan

    Hi everyone,
    Is there any way to create multiple subnets under one VLAN ? Right now, I am using VLAN 110 and it's IP is 172.16.0.1/16.
    We have three types of devices on this VLAN.I want to create 3 or 4 subnets for those devices under this VLAN for reducing the traffic or broadcast ?
    Please advise me.....
    Thanks in advance

    Mohammed,
    As long as you have a single VLAN only, you will not reduce the amount of broadcasts in this VLAN by using several IP networks. Even if the stations are in different IP networks within a single VLAN, every broadcast will be sent across the entire VLAN to all stations, regardless of their configured IP address. Broadcasting is a matter of Data Link Layer, or Layer2, and if you keep a single Layer2 domain (the VLAN), you will keep a single, merged, large broadcast domain.
    Just to answer your question, you could assign multiple addresses to an interface in a single network/VLAN by using secondary IP addresses, for example:
    interface Vlan110
    ip address 172.16.0.1 255.255.0.0
    ip address 192.168.1.1 255.255.255.0 secondary
    ip address 10.20.30.1 255.255.255.0 secondary
    However, as I explained, this will only allow you to "stretch" multiple IP networks over a single broadcast domain so there is no saving in terms of broadcasts or traffic reduction. For that, you must resort to multiple VLANs.
    Best regards,
    Peter

  • Group Different Albums by the Same Artist under one Album Cover

    I've read many posts regarding grouping tracks by different artists into one album, but none dealing with grouping tracks by one artist together from different album titles. An example of this would be classical pieces that are divided into different acts, or more recently, the new Green Day album "21st Century Breakdown," which also divides the album into "acts." Another example of this situation could be a box set by a particular artist, for instance an Eagles box set that contains 3 discs of differing titles (disc one: Eagles, disc two: Desperado, disc three: Live) in which case the three CDs are all essentially part of the same album.
    I know the grouping field can be utilized to tag all the CDs within the same set to keep them together; however, I have not been able to use this feature to group albums such as those mentioned above together under one album art in the grid or in the coverflow view. It looks rather silly when there are 3 or 4 of the same album cover in a row in the grid or the coverflow.
    The best way I could think to differentiate the different acts on an album or CDs in a set was to group the songs in their own folder and change the title of the album tag to reflect which act (or CD) those particular tracks covered. While this works in the list view to keep the tracks in order, it does not allow me to view the album as a “whole” using the coverflow view. It seems the only way to merge differently tagged tracks is if the ALBUM title is the same even if there are multiple artists. I’ve tried using the grouping, sorting, and “part of a compilation” options with no success. Is there any way to merge these tracks under one album art while retaining the different album names?

    Adding slightly to the previous post I would suggest that you give each disc of the set an appropriate disc no., e.g. Discs 1 of 3, 2 of 3 and 3 of 3 for Eagles, Desperado & Live respectively in your Eagles Box Set. Record the individual disc titles in the Comments or Grouping field, then change the Album title for all three discs to something appropriate like "Eagles Box Set". The three discs will collapse into one cover and play in sequence. If marking the transition from one disc to another matters you could, for example, simply add the album name in brackets to the first track of each album. You could use curly brackets to distinguish this from other types of track comment. For more organizational tips see my previous post on Grouping Tracks Into Albums, in particular the topic One cover for multi-disc album.
    The alternative approach for box sets which simply repackage a number of original albums together is to find the original artwork for each album.
    tt2

  • How Do I Group Multiple Disks as One Album?

    I've got the latest iTunes update, 11.0.4, and as with the update before it, I'm supposed to be able to group multiple disks as one album, but I can't figure out how, and can't find any directions at Apple.
    I've lately begun ripping my large collection of symphonies and operas on CD into iTunes. Operas especially almost always come on two, three, or even four CD's, BUT IT'S ALL THE SAME OPERA, and the CD's come in the same boxed set. On top of that, there really aren't any "tracks" in an opera; the plot and the music unroll seamlessly from beginning to end (that sometimes takes 5 or 6 hours, which goes with the operatic territory).
    On my CD player, I'm used to a pause between disks, but now that I've figured out how to get the "tracks" on each CD to play in order on iTunes (not so intuitive), I'd like to be able to go from the last "track" on Disk 1 to the first track on Disk 2 without interruption, since the technology should be able to support that option.
    In the INFO box, I've tried keeping "1 of 3," "2 of 3," "3 of 3." No joy. So I've tried erasing the first element, 1, 2, 3, and just leaving the total number of disks. Again, no joy.
    Since the album name is often filled in with something like "Carmen [Disk 1]" for example, and since Albums should have exactly the same name so that iTunes can figure out that in fact, they belong to the same work, I've tried deleting '[Disk 1]" etc. on all 3, leaving just "Carmen" in the appropriate space on the INFO panel for each of the 3 disks. Doesn't work.
    Has anyone else been afflicted with the same problem?
    Has anyone got a solution?

    Have you seen this helpful article:
    Grouping tracks into albums:
    http://samsoft.org.uk/iTunes/grouping.asp
    In the INFO box, I've tried keeping "1 of 3," "2 of 3," "3 of 3."
    That is correct.  Don't   erase the first element, 1, 2, 3, that should not matter.
    Since the album name is often filled in with something like "Carmen [Disk 1]" for example, and since Albums should have exactly the same name so that iTunes can figure out that in fact, they belong to the same work, I've tried deleting '[Disk 1]" etc. on all 3, leaving just "Carmen" in the appropriate space on the INFO panel for each of the 3 disks.
    Also correct.  Also chec, if the  "Sort album name" is the same.
    Do the artists differ on the tracks?
    Then set the "Album Artist" on all CDs to the same name (Various Artists), also check, if the album sort artists names differ.

  • Consolidating tracks under one album

    How do you consolidate tracks under one album... i imported an album and now it has multiple album covers, separating the tracks.

    Have you had a look at this troubleshooting page? It may be of some help: Why aren't songs with the same album art grouped together

  • How do you merge multiple songs into one album?

    When I added a downloaded album to iTunes, it created one album for each track. How do I merge all of these albums/tracks into one album?

    Some albums will fracture into a million pieces if you have different artist names. How the columns are sorted can effect this.
    If it is a multiple artists on one album select 'Compilation' in the options section for all of the songs on the album. 
    NOTE: You need to have multiple items selected to set this flag!

  • How do i put my songs under one album at once

    i have about 30 songs that i want to put under one album and dont want to do it one by one is there a way,

    Select all the tracks, Get Info., give them a common Album name and Album Artist.
    For more details see my article on Grouping Tracks Into Albums.
    tt2

  • How do i get all my songs of one album together under one album artwork

    how do i get all my songs of one album together under one album artwork  some are ok and some are all over the place

    If the songs in your library are not all in the iTunes Music folder you can consolidate them (Choose File > Library > Consolidate Library). When you consolidate, any songs in the iTunes Library that are not in the iTunes Music Folder are copied to the Music Folder and the Library is updated to point to those new files. Files already in the iTunes Music Folder have no changes made to them: Consolidating your library - Windows

Maybe you are looking for