Importing business docs to iCloud

Hi all,
I use MacBook Pro, iPad2 and iPhone 4S and want to use them in. A business environment, especially the iPhone and iPad. I have a bunch of business docs (sheets and docs etc.) already stored, and have Numbers on my iPad. I store my stuff in Dropbox, but can't import from there. I now have an iCloud account, but it is very unclear how I get my docs up into iCloud. Apple only talks about streaming music and photos which I'm not interested in in this instance.
Can this be done and if so, how?
Many thanks
P

iCloud does not provide general file storage in the manner of MobileMe's iDisk, or Dropbox. The nearest is uploading iWork documents (only - by dragging them to the iWork page on the iCloud site) which will then be transferred to any iOS device logged into the account. Once uploaded from a Mac you can't re-download a file until it's been edited on an iOS device. As you see, this isn't intended for syncing between Macs or providing online storage.

Similar Messages

Import of docs into new pages and iCloud-pages header / footer get lost

Hi,
after updating to pages 5.0 I cannot use my old documents: these are not importes / opened witheir respective headers / footers.
The same happens when importing "old" docs into icloud-pages.
Alexander

Hi,
after updating to pages 5.0 I cannot use my old documents: these are not importes / opened witheir respective headers / footers.
The same happens when importing "old" docs into icloud-pages.
Alexander

Importing business packages?

Hello,
Can anyone send me some link or doc which explains how i could import "Business Packages for Specialists" in EP 6.0?
If there is any doc that is specifically meant for importing "Business Package for SAP CRM 4.0" then it would be really great. Thanks.
Regards,
[email protected]

Hi,
The BP entry point is https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/e0c0bdca-ad6d-2910-f881-bc8202f8f8a9 which points to http://kwhelp.sap.com/SAPIKS/S47165b9df93c41b9b8a65f6c58f56f0b/KW/IWB_STRUCT9335C73C3D91995BE10000000A114084/IWB_EXTHLP8F35C73C3D91995BE10000000A114084/?LANGUAGE=EN&RELEASE=402&IWB_INDUSTRY=BBPCRM&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY for the online documentation.
Within that, SAP note 564198 is referred for the technical documentation, and within that note, the admin documentation place is pointed out: service.sap.com/crm-inst -> SAP CRM 4.0 -> People-Centric CRM Inst. and Config. Guides. There the admin as well as the install guides can be found.
Hope it helps
Detlev

If I delete docs from iCloud off of iPhone 4s, will it delete it from the iCloud in general? aka will I still be able to pull up from my MAC?

If I delete specific documents and data from my phone, using my phone b/c its staying icloud storage is full & my phone is freezing up....will it actually delete the docs from icloud so that when I use my MAC, they will be gone as well? Not sure if it is deleting from phone or iCloud for computer too.
Also, I don't want documents on my phone - when I save them from computer to iCloud, it seems to go there anyway & take up storage I need to run phone.
argh
thanks for help, I am horrible with technology so excuse my basic questions

What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

Is there a way to create a batch export of pages docs from iCloud?

I have been using Pages pretty much exclusively for the past couple of years. The new, crippled version has put an end to that. But I have about 1000 docs in iCloud that I need to get out of iCloud an onto to some usable platform like Goggle Docs (which does seem to keep improving, unlike iWork). I suspect that Automator or Applescript may be able to do this, but I'd appreciate any pointers.

If you synchronize Notes with iCloud, open the iCloud preference pane and uncheck the box marked Notes. If you sync Notes with another mail service, disable that in the Internet Accounts or Mail, Contacts & Calendars preference pane. You may be warned that notes stored on the server will be deleted. If you trust your backups, confirm. Leave the window open.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Notes
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.apple.Notes" selected. Quit the application if it's running. Move the selected item to the Trash, then restore it from a backup that predates the unwanted change. If you back up with Time Machine, enter it and select the snapshot from which you want to restore.
Log out or restart and empty the Trash.
Re-enable synchronization in System Preferences, if you disabled it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT4489 I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

The vCard must not be a compatible format. (Unfortunately, there are multiple formats.)
Often your carrier can transfer contacts between devices from different manufacturers. Try visiting your carrier's retail outlet and see if they can do this for you.

Ipad (OS 5.1.1) using pages incompatible with icloud. If I open up one of the docs from icloud, I can no longer open it on my ipad. Looks like the pages version gets updated to a version that is incompatible with my ipad.

I have the original ipad (OS 5.1.1) using pages 1.7.2 and backing up to icloud. If I open up one of the docs from icloud, I can no longer open it on my ipad. Looks like the pages version gets updated to a version that is incompatible with my ipad. Is there anyway stopping icloud from changing the version and is there a way to recover the old version of the document on my ipad?

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

How do i import and sync my icloud / iphone contacts into address book on my macbook pro, how do i import and sync my icloud / iphone contacts into address book on my macbook pro

HELP
how do i import and sync my icloud / iphone contacts into address book on my macbook pro, how do i import and sync my icloud / iphone contacts into address book on my macbook pro
Runnig 10.6.8 on a MacBook PRO.....

The easiest fix if you're running Snow Leopard is to export all your contacts, then import them into something like google (I already had a gmail account), and then just use google to sync your contacts instead of icloud (via the sync with Google button in the address book settings).
Its a bit sluggish to update, but it works well. You can then point your iphone, and other iOS devices to use google for contacts too.
If Apple don't want to look after their customers, other companies will gladly do so....

HT204394 how do i put microsoft word docs onto icloud

how do i put microsoft word docs onto icloud so that i can transfer to my mac book

Not really.
You can sign into iCloud.com from a web browser on your PC.
Open Pages and drag the Word document in or click the Gear on the top right and upload.
This will convert it to a Pages document. It will be accessible to you through iCloud and the Pages app on your iOS devices. You can always redownload the file from iCloud as a Word document.
As with any document conversion, this may alter the formatting.

DTW Import Business Partner

Business One 2005A SP01, Patch 29
DTW 2005.0.17
API version 6.80.319
I'm a newbie. Now that's out of the way.
Can anyone tell me in general, how does one determine what are the required fields and data types for a DTW destination? This ETL tool is very different from any I've ever used before in that the destination fields in the interface change based on the import data provided. I'm used to those being constant, with required fields and their datatypes clearly defined.
Currently I am trying to import Business Partners, all customers via ODBC. I provided data for the following BP fields:
RecordKey                 1
CardCode                  '1001'
CardName                  'Company One'
CardType                  'cCustomer'
DefaultAccount           '_SYS00000001'
GroupCode                 2
PayTermsGrpCode      3
The error log tells me all of my records fail for the following reason: [OCRD:BankCode]Application-defined or object-defined error oBusinessPartners.
I assumed the required bank info had to do with with where I deposit payments from these customers. So I mapped data for BPBankAccounts. Every record is the same except for the RecordKey.
RecordKey    AccountNo    BankCode
1                   123              'My Bank'
2                   123              'My Bank'
Now The records load, but I've got bank info on the Payment Terms tab, not the Payment System tab. So my fix made my error go away, but the data are wrong. I don't want to have to import fake customer bank data just to get around this error. What does DTW really want?

Thank you for your comments about the bank/payment tabs.
I've since discovered my real problem with DTW is that the error messages are frequently spurious. I don't know if this is a bigger problem because I am using ODBC rather than flat files.
I was only dragging in banking info because I had received the error message ' [OCRD.BankCode]Application-defined or object-defined error65171'. After I rebooted, I din't get this error any more and could load BPs without any banking info at all.
Likewise, I was having trouble with addresses and was receiving messages like
'[OCRD.State2] , 'The connected value 'MI' was not found in table States'Application-defined or object-defined erroroBusinessPartners'. This was a US customer. I am in the US and this IS a defined state.
What I've learned from this expereince is not to trust DTW error messages.

CAN NOT IMPORT BUSINESS AREA AS IT SAYS - JOINS NOT FOUND WHERE REQUIRED

We have recently migrated from Disco 4.1.48.08 to 10.1.2
Everything looks ok - we are able to look at existing workbooks and business areas. And we can export business areas successfully.
However
When we try to import some business areas it returns - JOINS NOT FOUND WHERE REQUIRED and fails. This is now causing a problem with how we promote from our test/uat and prod environments.
any ideas ?

Here's some information from Support that helped me...
Discoverer has many options on exporting and importing objects. Entire End User Layers, Entire Business Areas or only selected objects could be exported. To simplify the process of exporting and importing Business Areas, it is suggested that the export and import process should be done with entire Business Areas. The reason why it is not recommended that selected objects are exported and imported as a norm is to simplify maintenance.
It is still possible to export and import selected objects, but a knowledgeable Administrator is recommended to head the procedure. The process could get
very complex and difficult to manage.
Some Additional Notes:
- Join conditions are exported, but are not indicated as an object. Join conditions are only exported ** if ** the joining folders are exported.
- If the ‘refresh’ option is performed in Discoverer Administrator on an object and the underlying object on the database is not available, the object is dropped from the EUL. It is of utmost importance that the objects exist on the underlying database before the ‘refresh’ option is executed.
- Functions and Workbooks are not exported when exporting an entire Business Area. Functions and Workbooks have to be exported separately.
The first bullet is what was giving me this error "JOINS NOT FOUND WHERE REQUIRED". I was unable to do a full export - another unrelated error, so I came up with an alternate solution. I created a new BA that only contained the standard folders that my two custom BA's referenced - by JOINS and inclusion in my complex folders. I exported all 3 and they imported into the new instance with no issue.
Jewell

Importing word docs into i-tunes?

how can i import word docs into i-tunes? I try to drag the file to the icon in i-tunes, but it wont take.
Thanks

go to my computer look for the icon with your ipod name
double click that and if u see the folder notes then drag your doc into that
it will work

Stylesheets and applying to imported Word docs. (RHx5)

I've been reading a comments about style sheets, importing Word docs and formatting issues (in regards to importing Word docs and pre-determined styles/bullets/numbering). I also saw that someone was trying to create a css outside of RH and was having issues. This leads me to a couple of questions.
1. When importing Word docs, does RH create a separate css for each doc, or is there an option to not have this occur when performing the import process?
2. If I am understanding css', you should only have one per project, if you want all of html pages to appear identical, correct?
3. What do you do if you've made the mistake of having several different css' out there, making everything appear funky? Can you create a new project and import the documents without the css and apply a new css (created in the new project) to all of the html files? Will this assist in correcting a lot of the spacing, bullet and numbering problems?
4. Can I view the default css and edit it?
I think I have a big problem on my hands. I was trying to make things easier for SMEs who were designated to write procedures in Word by creating the pre-defined formats. After reading PG's pages, I sunk into my chair. I was having the problems he mentioned. I tried to edit some of the pages in the html editor and appear to have made them worse. I was trying to simplify the code a little (with what knowledge I currently have with html, which is minimal). I am fortunate that I only have about 200 documents that could be impacted. Any comments/suggestions are greatly appreciated.
Rob

1] When importing Word docs, does RH create a separate css for each doc, or is there an option to not have this occur when performing the import process?
That's the way it is, no option.
2. If I am understanding css', you should only have one per project, if you want all of html pages to appear identical, correct?
With the "if you want them identical" proviso, you would only have one CSS but you don't have to have them all identical. That is your call.
3. What do you do if you've made the mistake of having several different css' out there, making everything appear funky? Can you create a new project and import the documents without the css and apply a new css (created in the new project) to all of the html files? Will this assist in correcting a lot of the spacing, bullet and numbering problems?
It's not a mistake but if you want to get out of that situation, you need to do some cleaning up. The first step will be to create a CSS that contains all your existing style names, note I say names. Each of your CSS files will have a variety of styles but let's make it easy for this explanation. One has H1, H2, P and P.Note (a class) while another has One has H1, H2, P and P.Warning (a class). Now let's say you have just two topics, one has CSS_1 and one has CSS_2. The H1, H2 and P styles may be the same or different but assuming they are different, you now want them to be the same so what you want is a CSS with H1, H2, P, P.Note and P.Warning. You could then apply that to both topics and all the content would be displayed as defined in CSS_3. Obviously the real task is bigger but the principals are the same.
The way I would tackle it is to create a new CSS and copy in the styles from the biggest of your existing CSS files. Then I would look at the others and copy in any styles that are not already in. That gives you all the style names, albeit with the wrong appearance. Then you start working through the styles to get them right. It is not as bad as it sounds. I recommend using Top Style from http://www.bradsoft.com. There's a free version that only opens one CSS at a time but you can see what you are doing with it. The others can be open in Notepad.
4. Can I view the default css and edit it?
Yes.
I think I have a big problem on my hands. I was trying to make things easier for SMEs who were designated to write procedures in Word by creating the pre-defined formats. After reading PG's pages, I sunk into my chair. I was having the problems he mentioned. I tried to edit some of the pages in the html editor and appear to have made them worse. I was trying to simplify the code a little (with what knowledge I currently have with html, which is minimal). I am fortunate that I only have about 200 documents that could be impacted. Any comments/suggestions are greatly appreciated.
Next time you need input from the SMEs, output to one Word template from RH so that they all have the same appearance. Their job is provide content so the styles are irrelevant to them.
Yes you've got some work but it isn't too massive. Hope this helps.
See www.grainge.org for RoboHelp and Authoring tips

Pages 09 Version 4.0.3 has stopped importing Word Docs

Until a week or so ago Pages would import Word Docs (.doc) without a problem, it now fails giving a message "the document was created with an unsupported version of Word". As this message appears agains all .doc, created from 2001 (whatever that version was) through 2009 created in Word 7, there appears to be a real problem.
Would best course of action be to trash the application and reinstall?

So, there is really something odd in the shared part of the system.
It may be that something is missing or weird in the set of shared Frameworks items :
If it's that, the only available soluce is to re-install iWork and update it with the late updater.
It may also be a problem with files belonging to the System itself.
Run a tool like the free Onyx available from :
www.titanium.free.fr/index_us.html
and ask it to
repair permissions
clean caches.
It may solve the problem but I can't guarantee. There are so many components in the operating system that it's difficult to guess which is the wrongdoer.
Yvan KOENIG (VALLAURIS, France) samedi 3 avril 2010 18:36:29

Import Business Catalyst site button not working

I have installed Dreamweaver and activated it. I am trying to import a draft site which I developed on an old computer and the "Import Business Catalyst site" button does nothing. Likewise in the Bus Cat side panel, the "Get Started" button starts nothing.
Does anyone know what the problem may be?

This is encouraging (not) I have asked a very similar question today but I see you have received no assistance after a week !!

Importing business docs to iCloud

Similar Messages

Maybe you are looking for