Importing clips from iMovie HD does not preserve capture date

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

Similar Messages

Importing clips from iMovie HD to FCE4

Hi. Have read with interest a couple of questions on this same issue, with the advice from Tom Wolsky seemingly being to not mix the two applications and just get stuck in with FCE. However, i'm finding FCE difficult to like/get to grips with. But more importantly, after attending some Apple onetoone sessions, it seems my Canon camcorder might be a little long in the tooth and there may be some tape slippage as I was getting time code errors when trying to import directly to FCE. The fix seemed to be to capture the footage via iMovie and import to FCE using 'show package contents' route. Having now though imported some footage from a second tape, I have some of the clips showing as Offline for some reason. Is the trick to import clips from IMovie as per Tom's suggested route on 9/8/08?

I import video from my camera into iMovie 4, because that is the last version of iMovie, I believe, that was capable of flushing unwanted video off the hard drive, and I can bring an entire tape into iMovie, trim it down for FCE, and then get rid of the unwanted footage. iMovie 6, like Final Cut Express, is a nondestructive editor and can't erase unwanted footage from the hard drive, and as you know, video uses up hard drive space FAST. To get rid of discarded edits, you either have to use iMovie 4 or Final Cut Pro.
iMovie is also much easier to import video into than Final Cut Express, with all the latter's complicated controls. With iMovie, you just plug in your camera, iMovie then says "Camera Connected," and you hit Play and Import. Stone simple. Also, in iMovie you can hear the audio as it comes in, and if I remember right (it's been a while since I did it in FCE), you can't hear your audio tracks as your video imports into FCE. Not a big deal, but an annoyance.
Once the video is in iMovie, then I cut and trim the video to get rid of all substandard/unwanted stuff, and then Empty Trash, which erases the unwanted video off the hard drive, saving mucho space over the course of a project. Otherwise, you're just stuck with the unwanted video, and all it does is fill up your hard drive. Then you export (or "Share," in iMovie parlance) your video from iMove as a QuickTime movie, and drop that QT movie into Final Cut Express's Browser. Then create your FCE project from it.
The only objection I have ever seen to this procedure is people complaining that their QuickTime movie from iMovie has to be rendered in FCE before FCE can use it, and this takes a bit of extra time. Well, that's true, unless you export your video from iMovie in a form that FCE can use natively. Then it doesn't need to be rendered at all--it's just as though you had imported it from the camera directly into FCE. Most people don't know how to set up iMovie to do that.
Here's how I do it: (this is iMovie 4; I assume other versions are the same), Select Share > QuickTime and choose Expert Settings. On the next screen, select Export: Movie to QuickTime Movie, and click the Options button. In the Movie Settings window that this brings up, on the upper (video) part of it, under the Video checkbox, click the Settings button there, and for Compression Type choose DV/DVCPRO-NTSC, and under Compressor Quality, move the slider to Best, and click OK. Under the Sound checkbox, click Settings, and then choose Linear PCM, Stereo, and 48.000 kHz for Sound Settings. Under Render Settings, choose Qualty: Best. Just below that, uncheck the "Prepare for Internet Streaming" box. Then click OK, and the window will go away, and you're ready to export.
Give the video a name, and a place to save to, then click SAVE. The QuickTime movie that results from this can be dropped straight into FCE and requires no rendering; it works just as though you had imported it directly into FCE from your camera.
Tom B.

Importing clips from iMovie - jittery

Just got Final Cut Pro 5 and I'm having a problem with importing clips from iMovie into FCP5. The clips were fine in iMovie, but the images are jittery in FCP. I tried Apple Care, but they wanted to charge me $200 to answer my question eventhough I just bought the software yesterday!
any ideas most welcome - thanks

Nowhere is it advertised that iMovie is compatible with FCP.
One is a consumer format, with less features, like lack of timecode. The other is a professional format, which relies heavily on timecode.
Yes, output to tape from imovie, then capture with FCP.
#20 Using iMovie to Capture for FCP edit
Shane's Stock Answer #20:
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it...
"There's no need to fear, UNDERDOG is here!"

Preview disabled, importing clips from imovie

I just got a Canon Optura 60 video camera.
I'm in a hurry to get the clips into final cut and the log and capture procedure is time consuming and confusing.
plus my preview is disabled in the log and capture window and I just read a long thread about this problem.
it seems to conclude that the solution is to deinstall quicktime 7 reinstall quicktime 6, which I can't do with 10.4.
I already figured out how to easily get the clips out of the camera and into iMovie, but I want to edit in Final Cut. I have a LaCie 250gig hard drive for media storage.
Is there an easy way to import the clips from iMovie to final cut pro HD 4.5? thanks

so far, by logging in the clip I even got preview to work, and the final cut is moving the clip around in the camera. but I still haven't managed to actually capture the clip. when I try capture now, it justs waits for time code.
when I log in the clip and click on capture clip, the clip appears in the preview window, and then I get an error message: "unable to locate a specified timecode. you may have specified a time code with insufficient room for a pre/post roll operation"
so how do I enter the time code?
or could it be that I did not enter time and date on video camera?
If anyone knows of a step by step book for idiots that says 1, plug in firewire, 2 go to log and capture, and so on, I would happily buy it.
thanks ever so much

16:9 ratio and imported clips from iMovie 4

I have imported clips in iMovie 4 from a miniDV with 16:9 format. iMovie 4 compressed the ratio of the images but I have been able to export back to 16:9 format with Quicktime.
I now have stepped up to iMovie HD (5) so I can work in the 16:9 format but my previously imported clips still display in iMovie in the 4:3 format.
How can I change the imported clips to 16:9 ratio to edit and create my movie. Is it possible?
Thanks in Advance,
Christo

I've worked it out, here it is if anyone wants to know:
Open a new project in iMovie 5, source the media files from the previos project and drag them into the clips pane of iMovie. The clips import in the 16:9 ratio. Sweet.
All the clips are duplicated, so I import the clips a few at a time and delete the clips from the original media to manage disk space.
Christo.

Importing clips from iMovie project (they keep ending up in the trash)

I have never tried to import other clips from another iMovie project before and I just tried it yesterday. This is what I did:
-I went into the other project and clicked on each individual clip from that project that I wanted (one at a time).
-I copied that clip and then saved it to the desktop
-From there I copied those clips to my external drive (which holds the new project that I am working on
-I then opened up the new project in iMovie
-I went to File<Import
-I selected the clips that I had copied over to the external drive
-I imported them
-They all showed up fine, they played fine and I was able to edit them and put them into the time line as well
The problem I face though is after I save the project and exit, the next time I open the project, each of those clips are missing and have been placed in the trash
What am I doing wrong?
Thanks ahead of time for your help!

It sounds like something may be preventing iMovie from properly saving the project on the external drive. The drive format may be wrong, or third-party software might be causing conflicts. More here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Another possibility is that you are opening the wrong project file saved inside the iMovie 5 project. If your project was originally an iMovie 4 project converted to iMovie 5 that's an easy mistake to make. More here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1971832
Note that the copy/export/import routine you used can be simplified enormously. iMovie 5 lets us Copy and Paste clips much more simply. To copy clips from Project A to Project B, open Project A, select all the clips you want copied to Project B, choose Edit > Copy, open Project B, move the playhead where you want to place the clips, and Paste. iMovie will import all the files that support those clips from Project A to Project B. Note that it imports the entire file for the clip, not just the clip itself. That's so the clip inherits all the non-destructive editing features it had in Project A.
To avoid Project B becoming unnecessarily large, it's important to Copy and Paste all the clips you want together. If you copy two clips at the same time that share the same file iMovie imports their source file just one time. But if you Copy and Paste two clips that share the same source file separately, iMovie imports the same file twice.
Karl

Setting Duration of Photos (still clips) in iMovie '11 Does Not Work

Howdy -
I realize there are already similar posts to this one, but so far as I could tell, most of them involve (& focus on) transitions, whereas my issue is strictly with setting the duration for which a photo is held in iMovie.
Effectively, I am trying to get a 'stop motion' feel from iMovie. I deselected the auto-apply 'Ken Burns' to all photo imports in the project preferences and figured I would edit the photo duration afterwards, given that the shortest possible duration in the project preferences is 1s, which is much too long. That is where I run into trouble: the "duration" field is acting up a great deal - sometimes it won't even respond to my entering different numbers, other times it will. Sometimes when it does respond to my typing numbers, it won't let me type anything in the decimal position. When it does let me type something in the decimal position, e.g. 0.2s, when I hit enter, it re-sets the time to 2.0s. I've tried different formats for entering time (0:00:2; 0:00:02; 0,2; with & w/out 's' etc) - all to no avail.
I'm very curious to know if anyone else has reported this problem, & if so what the solution is.
In case anyone else is having this problem, I did find a workaround:
     1. Import your photos as necessary
     2. Select one photo and manually crop to desired time scale (e.g. 0.3s)
     3. "Trim to selection"
     4. Select that same clip & bring up the window for editing the duration, check the "apply to all stills" box.
     5. voila - amazingly this works.
Although this is a perfectly easy workaround, I'm a little disconcerted by the fact that iMovie won't repond properly & would be very interested to understand why.
Thank you in advance for your help.
Kind regards,
Rax.

Hi Rax,
This may not help, but in iMovie Preferences there is an option to display time down to the frame level. So, rather than entering time as a decimal, you enter each time component separated by a colon. So, 2.5 seconds would be entered as 2:15 - that's 2 seconds and 15 frames (for NTSC or 30 fps formatted video).
See this screenshot:
As I mentioned, this may not help. At times I've also had trouble adjusting the duration of stills, even though I have my preferences set to display time at the frame level. Transitions can cause issues with stills duration. In most cases, a transition can be no longer than half the duration of the shortest clip on either side.
Notwithstanding the transition methodology, my feeling is that there is a bug in iMovie that causes problems with stills duration in certain circumstances. This applies to both iMovie '09 and iMovie '11 (also possibly '08).
John

"Import GPS from iPhone photos" does not work with iPhone 4

I have not been able to get A3's "Import GPS from iPhone photos" to work with my iPhone 4, I get an empty list of photos. A3 is able to import photos from iPhoto 4 without any problems but I'm not able to get the GPS data.
I'm not sure if it is an iPhone 4 or iOS4 issue, I tried my old iPhone 2G and "Import GPS from iPhone photos" is working fine.

Where are you seeing this "Import GPS from iPhone" option?? I just tried importing a picture directly from my iPhone ,and it correctly had its place marked on the Places map. Am I misunderstanding what you all are trying to do??

How to import photos from Mail to iPhoto and preserve the date created?

I have several photos sent to me via email attachments in Mail which I want to "add to iphoto." When I do this, the original date of the photo changes to "today's date."
When I drag the photo to the desk top, the file (photo) properties change and the date changes to "today's date."
Is there a way to import photos and preserve the original date the photo was taken? For example, if my family finally got around to sending me photos from 4th of July, I know the date is 7/4/2012, not today's date, 10/9/2012.
I want to avoid the time/work of doing batch changes on countless photos I want to add to iphoto.
iphoto 11
mail 5.3
Lion 10.7.5

Larry, I need more information...
Using what you said, I ran some tests using photos taken with my digital camera in iPhoto. My photos show the following information in the "information" sidebar:
•type of camera
•Flash on
•Format size
•File size (MB)
•File type (jpeg)
•Frame "number"
•Month/day/year/hour/min/sec/AM-PM
Then I tried to email a photo to myself: I have tried: "share," "attach," "drag/drop" a photo into email and sent it to myself as a test. Once the photo arrives in my Mail inbox, I have tried various ways to add this "test" photo into iPhoto:
"Add to iphoto"
"drag into iphoto"
"export into iphoto"
Each time, iphoto created the photo with "today's date." In the past, I would get an alert: Photo already exists in iphoto, do you still want to import? Duplicate or Cancel
Can you elaborate on, "if the photo properties are present and correctly formatted then iPhoto uses them."
When I drag a photo to the desktop and double-click to preview the photo, the top of the preview window says:
P1009.jpg -- locked (gray lettering of the word "locked")
Is there a setting I need to change to "unlock" the properties of my photos?*
Thanks!!
MG
*My original post focuses on importing photos sent from other people. I am hoping if I can solve the matter with my own photos, other photos will import with original dates created, too.

Converting to DNG in LR4 does not preserve the date

When converting to from Canon CR2 raw to DNG (on Windows 7 x64), the newly created file has the conversion date and not the creation date of the original picture file.
This is an issue several people have complained about for the DNG converter and one suggestion was to run a custom script: http://forums.adobe.com/message/4109737#4109737
I hope Lightroom 4, with the goal to optimize the photo editing workflow, will give us an uption to preserve the date.

Thats completely confusing: LR shows me first a date/time which is of no use at all – who will be ever interested in such file data when editing pictures.
The one date/time that's really interesting - when to photo was taken - follows in the second row. And again strange: it is labeled in braces: (original)

Lightroom does not Recognize Capture Date

I have a lot of slides that I am scanning into Digital images.
The Nikon CoolScan does not include a capture date in the .jpg file so I add one using the ExifPilot program.
All other programs that I have tried correctly recognize this EXIF data, including Adobe Photoshop Elements. But the Lightroom does NOT recognize it and the file gets put into the library under "Unknown Date" Attempts to change the date with the Metadata/Edit Capture Time command do not work.
Any Ideas on what could fix the problem?

Yes, this is a problem, not only with files from scanner. I started a threat
called "Date/Time, Exif and Lightroom" on March 6 about that - have a look
there. Alas, no solution.

Importing clips from Imovie into FCE - Clips don't match

Hi
OK I have been successfully importing Imovie clips into FCE, but have recently hit a problem. I make a rough edit in IMovie but when I open the imported file in FCE I get different footage to that which sits in the IMovie project.
Yes I am opening the right clips

nothing?
ok I have worked around it a little by importing all the footage and that way I get most of it but still not all of it makes it through

Scheduling the report from Infoview portal does not show up data

"The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
Thanks in advance,
Sri

Hi Sri,
When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
Just try to login with admin account and try to schedule the report.
Also check the report in CMC and see the preview of the report.
If the user doesn't have enough rights to schedule the report, then it doesn't allow it.
Also check with in the Folder rights with in the report is saved.
Regards,
Naveen.

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion. Help??

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion.
I was working on a project, when all of a sudden the event library went blank. There are no devices showing in the left column, only "last import" and "aperture videos". There are no video clips in the editing window. I have "Show: All Clips" selected. I've tried "group events by disk".
When I have a Project open, it plays just fine. There are no yellow triangles saying "source clip is missing". Yet, again...nothing is in the event library large editing window. So, it seems the data is still there, but invisible. This is true with all the projects, and all the external devices I've experimented by plugging in to see if their video clips show up in the event library.
I have tried to import new movies, and iMovie responds as normal...looking like it's importing, then "generating thumbnails", then it makes the "ding" signalling that the import is complete...but nothing shows in the event library. I've tried importing movies from the harddrive, from quicktime, and from an external drive.
I have searched the forums, and found many users with a similar, but not the same, problem. For them, it seems the "go to users-library-preferences and delete iMovie plist" has solved their problem. This didn't work for me.
I uninstalled/reinstalled iMovie, I even have re-installed Mountain Lion (from a last-ditch effort suggestion from Apple technician).
HERE'S AN INTERESTING DETAIL: After almost 5 hours on the phone with Apple, I decided to cut my losses and take my project to another Mac I have. I'm working on a project, for work, that is critical that it's completed by tonight (whoops), and all my video is on an external drive. So, I plug in the external drive to Mac #2, open iMovie, and everything is looking fine. I continue importing some files I was converting, through Wondershare, and suddenly (whether or not this has to do with the importing, I'm not sure), the SAME THING happened to Mac #2!!!! I can't believe this.
Does anyone have any suggestions? Have you ever heard of this happening? Could it have to do with the files I'm importing???
I apologize if my language is confusing. Obviously, I'm not an Apple genius-person! I hope I've provided all the information you need.
Mac #1 is a 27" desktop, mid-2012, software up-to-date. Mac #2 is a 24" desktop, about 4 years old, OSX 10.7.5

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

Trying to Import Clips from Camcorder; iMovie Plays Completed Movie Instead

I know this sounds strange, but when I try to import clips from my mini DV camcorder, I hear the sound the CD/DVD player makes when my laptop starts up, and then iMovie 08 proceeds to play a movie that I completed 6 months ago, haven't opened and played since then, but does not import the clip playing on my camcorder! Anyone have an idea of what is happening? Again, almost every time I press the "camera" icon to bring up the viewer to see the clip playing on the camcorder, the CD player makes a sound, and then instead of seeing the clip from the camcorder, I see a completed iMovie/iDVD project. In addition, the particular movie that plays is not in my project library, nor is it in my event library? What do I do? Trash a preference file? Thank you.

I know this sounds strange, but when I try to import clips from my mini DV camcorder, I hear the sound the CD/DVD player makes when my laptop starts up, and then iMovie 08 proceeds to play a movie that I completed 6 months ago, haven't opened and played since then, but does not import the clip playing on my camcorder! Anyone have an idea of what is happening? Again, almost every time I press the "camera" icon to bring up the viewer to see the clip playing on the camcorder, the CD player makes a sound, and then instead of seeing the clip from the camcorder, I see a completed iMovie/iDVD project. In addition, the particular movie that plays is not in my project library, nor is it in my event library? What do I do? Trash a preference file? Thank you.

Importing clips from iMovie HD does not preserve capture date

Similar Messages

Maybe you are looking for