Importing Color Corrected Master Back Into System for Trailer, DVDs, etc.

Hi there,
Thanks to all of you who have been of great help to me as I've been working with Technicolor on the Mastering of a feature. I've never really had a feature leave my system before, or at least one that I stayed in control of, so this has all been very new and educational.
Okay, question (or, rather, a confirmation) for final steps - they are sending me the following next week, for me to keep or for import back into Premiere for trailer cutting, still pulling, festival DVD making, etc. I just want to make sure this list is sufficient.
Physical Deliveries
HDCAM Master Tape
DVD-R
Files on a Hard Drive
10-Bit Uncompressed Quicktime of Completed Film
Compressed 422 ProRes Quicktime of Completed Film
I guess my main question is - will the 422 suffice for a high quality trailer and DVDs? They also offered to make an even-more-compressed H264, but if I can inport the ProRes Quicktime, that doesn't seem necessary, does it?
Thanks!
Stephen Cone

I guess my main question is - will the 422 suffice for a high quality trailer and DVDs?
Yes. All else being equal.

Similar Messages

How do I import Map Info Tab files into Spatial for a map of europe?

How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
Any Help welcome :|
Tim

Tim,
MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
Andy Greis
CompuTech Inc.

How can I import an ibook file back into iBook Author?

I exported an ebook from iBook Author thinking it is the equivalent of saving the file.
I did not save the file, I only exported it and than exited the program.
My active file is vannished.
I need to make some adjustments to the ebook, but can not bring it back up.
Is there a way that I can re-import the iBook file back into iBook Author?
When I open iBook Author and try to open the exported file the program does not recognise the ibook file...
Thanks for your help!

Check for previous versions of that book in iBA....even if not saved.
You can dig into the .ibooks file by changing the suffix to zip, but you'll have to manually extract what you can from assets you find. Please only do this with your own books.

Move System Preferences Help file back into System Preferences folder?

How do I move System Preferences Help file back into System Preferences folder. I unintentionally moved it. My Mac blocks putting it back. Suggestions? Thanks!

Somehow I managed to delete my System Preferences shortly after upgrading, and was able to use the 10.4 one for a while until I applied the patch. Luckily, I already had Pacifist, and with your directions I was able to get close enough so that I could find the Applications folder within the ContentsofEssentialsSystemSoftwareGroup > ContentsofEssentials.pkg > Applications > SystemPreferences.app.
For that, I owe you the deepest gratitude and a gigantic THANK YOU. My System Preferences is now fully reinstalled and working wonderfully.
Pacifist might actually be worth purchasing.

Is there an easy way to import those misfortunate photos back into iphoto

I moved my iphoto library to my external drive so that both my laptop and imac can use the synced photo library.
... but now my imac iphoto says I can not open my iphoto library, because is from a newer version of iphoto. And the application then closes.
I figured out my newer laptop has a newer version of iphoto on it.
Imac iphoto version is 6.0.6
Laptop iphoto version s 7.1.5
I Downloaded iPhoto Library Manager and use its rebuild function. This created a new library but says a lot of my pictures are lost. I can search and find them on my external drive and reimport, but there are a lot of them! Any suggestions?
I'd rather use the 6.0.6 on my imac than pay for an upgrade.
I just won't use my laptop's iphoto.
BUT, how can I get my 6.0.6 working again with all of my pictures in tact? Or is there an easy way to import those misfortunate photos back into iphoto painlessly?
Any other solutions??
Will Snow Leopard have the newest iPhoto included?
Thank you!
Kim

Kim
If you want to revert to iPhoto 6 then you have two choices:
1. Restore from your back up
or
2. Create a new v6 Library and start over.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'.
Go into the Old iPhoto Library (Right Click on the Library Icon and choose ‘Show Package Contents) and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the old iPhoto Library.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
“Snow Leopard” is an OS Upgrade. While we have no idea what will be included with it, on past experience, no, it will not include a new version of iPhoto.
Regards
TD

Deletion of user if he hasn't login into system for long time

Hi Experts,
can anyone tell me that does acess enforcer provides nay facility of automatic deletion of those users who haven't login into system for long time.
Please suggest.
Thanks & Regards,
Anubha Pandey

Hi Anubha,
no, Access Enforcer is a tool for assigning/removing authorizations via workflows.
Run a regularly report in ABAP to delete the users that haven't logged on.
Regards
Daniela

Importing completed iMovie back into iMovie for additional editing

My daughter recently completed a mini movie, courtesy of an Apple Film camp...lots of fun.
Her completed movie, made at the Apple Store using iMovie, was placed on a DVD. The DVD plays the movie, which is great, but i am not able to import the movie back into iMovie, so that I can edit it, or rather, shrink the size, for my daughter for use in other platforms.
Everytime I try to open the DVD, I have files for audio and files for video, which can't be imported in, and no complete iMovie file.
I'm probably doing something very stupid, and if somebody could help, that would be great.
Thanks!

Once you encode your movie for DVD, it changes the format/codec to MPEG2 which is no longer readable by iMovie.
I suggest you read the Recent User Contributed Tips at the top of this forum - the one by AppleMan 1958 - How to import a home movie on DVD into iMovie for editing:
http://discussions.apple.com/thread.jspa?threadID=2255575
Regards, Z.

Color correction novice back with a problem/question.

Hi,
I have been working on color correction for an edit of a live 2 camera shoot concert. Edits are almost all final. I dug into correcting color between the 2 cameras & after some practice got good results.
Tho, I noticed that corrections looked slightly different after rendering them, and again slightly different after exporting to full uncompressed quicktime video.
Saturation levels shifted (less), & some shots showed slightly different color balance. This is a unique shoot because the stage was fully lit in red light & red can be one of the most difficult colors in video (in my experience).
So I eventually started that vicious cycle of correcting not by eye but by anticipating what was needed to get a desired result after rendering & exporting... each time it was lengthy renders & exports before seeing the results.
So I had several versions of the project saved w/ different renderings, etc. All of this is stored on a 250 gig 2nd internal drive which I bought & installed just for editing. All files & edit lists etc were kept there.
So I'm trying to look at different versions after having to put the project aside for a couple of weeks, and every version I open shows me a list of render files that it says it can't find. I've just been choosing to re-render.
(I'm wondering if a routine session of running disk warrior on my drives could have contributed to this?? Thats the only thing I can think of, other than the OSX upgrade to 10.4.4, which also included a quicktime upgrade.)
I'm new at this so I'm trying to figure out if this disappearance of render files is normal? In one version I chose 'search computer for render files' or something to that effect & I watched it go thru my drives one after another & when it got to the 2nd internal drive (where all the render files should be), it spent about 1/10th the time that it spent searching other drives. It really jumped in & out of that drive really quickly.
Its not all the render files that are missing, I looked in the render folder & some have older dates, while a section of them are from tonite when I re-rendered. Then more with the older date.
Anybody have any advice?
Thanks for your help
Duane
G5 tower Mac OS X (10.4.4)

Hi,
I have been working on color correction for an edit of a live 2 camera shoot concert. Edits are almost all final. I dug into correcting color between the 2 cameras & after some practice got good results.
Tho, I noticed that corrections looked slightly different after rendering them, and again slightly different after exporting to full uncompressed quicktime video.
Saturation levels shifted (less), & some shots showed slightly different color balance. This is a unique shoot because the stage was fully lit in red light & red can be one of the most difficult colors in video (in my experience).
So I eventually started that vicious cycle of correcting not by eye but by anticipating what was needed to get a desired result after rendering & exporting... each time it was lengthy renders & exports before seeing the results.
So I had several versions of the project saved w/ different renderings, etc. All of this is stored on a 250 gig 2nd internal drive which I bought & installed just for editing. All files & edit lists etc were kept there.
So I'm trying to look at different versions after having to put the project aside for a couple of weeks, and every version I open shows me a list of render files that it says it can't find. I've just been choosing to re-render.
(I'm wondering if a routine session of running disk warrior on my drives could have contributed to this?? Thats the only thing I can think of, other than the OSX upgrade to 10.4.4, which also included a quicktime upgrade.)
I'm new at this so I'm trying to figure out if this disappearance of render files is normal? In one version I chose 'search computer for render files' or something to that effect & I watched it go thru my drives one after another & when it got to the 2nd internal drive (where all the render files should be), it spent about 1/10th the time that it spent searching other drives. It really jumped in & out of that drive really quickly.
Its not all the render files that are missing, I looked in the render folder & some have older dates, while a section of them are from tonite when I re-rendered. Then more with the older date.
Anybody have any advice?
Thanks for your help
Duane
G5 tower Mac OS X (10.4.4)

Importing Aperture 3 library back into iPhoto 11

I have 15,000 photos that I imported last summer from iPhoto into Aperture 3 last summer. I'm not happy with Aperture 3 -- it's way too slow on my machine and I want to move all of my library back to iPhoto. It looks like the migration is only set up in one direction. How can I move all of my photos back into iPhoto en masse and have events, places and faces work?

In brief: you don't. Migration is only one way. You're exporting and importing.
You will need to export from Aperture, choosing to export Originals or versions (or both - but remember they will be treated as individual pics in iPhoto, there is no way to connect them as Original/Modified pairs again). In the Aperture export dialogue you can write the metadata to the file - this will include keywords, captions, places etc, but it will not include faces. There is no way to share faces back to iPhoto. Period. You can use Faces as the basis for keywords but they'll need to be rescanned when back in iPhoto)
To have them in Events, the easiest thing is to export from Aperture project by project to folders, then import the folders.
Obviously, you'll lose any Albums. Slideshows, Books etc that you've done in Aperture.
You don't mention the specs of your machine. It really would be easier to sort Aperture out...
Regards
TD

Color correcting master clip/parent file

can I color correct the master clip and effect all of the affiliate clips in a timeline? Thanks

Only if you do the cc'ing prior to editing the footage into the timeline.
If the footage is already cut into the timeline, you could simply 'copy' the color correction then use 'paste attributes/filters' to the clips in the timeline.
Alternatively, you could set the color correction, drag it's icon from the viewer, into the browser then drag that to your clips in the timeline. Or, simply drag the icon (found at top left of color correction tab in the viewer...looks like two sheets of paper with a hand over them) directly from the viewer, onto the clips in the timeline.
Skinnin' the cat.
K

Importing iMovie-created movies back into iMovie

Hi - new here to to the forums; I have had a Mac for less than a year.
I have created many projects in iMovie and exported the files using "share...export movie" creating m4v files. I now want to string several of those exported movies together into one continuous movie. The first way I could easily think of to do that was just to import my final created movies back into an event and piece them together in a project how I want (there may be a better way - I'm open to suggestions).
The problem is that not all of my iMovie-created movies are being recognized for importing by iMovie. I think I have determined the problem, but I don't know how to fix it: the codec for the ones that will import says "H.264, AAC" but the ones that won't import says "H.264, AAC, Text". I have no idea what I did differently to have the codec include "Text" in some but not others, and no idea what to do to fix it.
Solutions? Thanks in advance...

Welcome to the  Discussion Forums.
If you simply wish to join your movies together, you might be better doing this in Quicktime. However if you want to edit further such as applying transitions/titles etc between the movies you would need to use imovie.
If you have the original projects in imovie, it would be better if you re-exported them as full quality AIC video and used this to assemble a new movie in imovie. If this is not possible you can remove the text tracks that are causing you the import problem using the properties window in Quicktime pro.

Color Correct Master Multiclip

An AE has already made multi-cam clips for me. I want to color correct one of the source clips. Can I do this within the multi-cam clip?
Or can I color correct the one master clip and replace it in the existing multi-cam clip? Or do I have to remake the multi-cam clip from scratch after I do the Color correction?
Can I do either one of these and have the color correct automatically update in the sequence I have already cut using the existing multi-cam clip?
Thank you,
Patrice Shannon

Not sure the official way to do this, but if you create a copy of the clip you want to correct, correct and save it and rename it to match the original clips name and folder path (I'd save the original file someplace else) fcp will automatically connect to this clip.

HT4622 How to import .band and .mid files into GarageBand for iOS

Using GarageBand for MacOS X, I have no difficulty importing and playing .mid (MIDI) files. Indeed, I can even rename .kar (Karaoke) files to .mid, import them into GarageBand for MacOS X and see the lyrics along with the score. Using File Sharing for iOS apps in iTunes.app, I have tried to import .mid and .band files (made from .mid files with GarageBand for MacOS X) using this mechanism. I get no errors but it doesn't seem to work. That is, neither the .band file nor the .mid file are accessible from within GarageBand for iOS as far as I can tell. What should I be doing instead?

As I understand it GarageBand for iOS .band projects can be imported to GarageBand for OS X, but the reverse isn't true. GarageBand for iOS does not import midi files.
The File Sharing section of iTunes doesn't validate the files you put into it, but if the app doesn't like the structure of the file it will just ignore it.
tt2

I'm trying to import an imovie back into imovie from a dvd

I'm trying to import a moive into imoves froma advd. The dvd contains an imovie I created. I need it back into the computer

It can't really be done. DVD is a compressed format that doesn't lend itself to further editing. You can possibly use Handbrake or similar tools to convert the DVD to a format that can be re-imported into iMovie. But you will lose picture quality, and there's no way to get back the transitions, subtitles, etc in any editiable form.

How to Import Garageband projects and files into Cubase for Windows?

Hi
I've recently started using Garageband to record my ideas and compositions. I had 2 main questions:
1. How do I transfer the audio files created in Garageband in a format which will allow me to edit them in Music Software for a Windows based Operating system? Tranferring them to iTunes and then converting them to MP3 doesn't help because then my friends can't edit my guitar parts and other backing tracks.
Mainly I need to know how to save and import Garageband projects and individual tracks into Cubase/ Cakewalk for Windows so that my band guys can edit the tracks and send me their ideas.
I'm the only one out of my friends who has an Apple Macbook and most of my band guys still use Windows based Operating systems.
2. I record my guitars and other instruments using the Digitech GNX4 guitar effects processor as the sound source through USB. While I can record clean guitar without any problem, the moment I switch on the distortions on the GNX 4, there is a loud and constant hum from the speakers. I am therefore not being able to record distorted guitar sounds.
Please help on this.
Thanks and hope to hear from you all.
Cheers
Prash

Tranferring them to iTunes and then converting them to MP3
same as the protools procedure:
http://www.bulletsandbones.com/GB/GBFAQ.html#openinprotools
there is a loud and constant hum from the speakers.
Could be a ground loop problem. Test it using the MacBook on battery power only.

Importing Color Corrected Master Back Into System for Trailer, DVDs, etc.

Similar Messages

Maybe you are looking for