Importing d300s videos into premiere cs5 (os x)

hello,
i shot some videos using nikon d300s and some of them are working perfectly fine (in preview and quick time) and some of them can;t be opened by preview and quick time for some reason, however they are working perfectly well in VLC and imovie. anyway, I can't import ANY of them into premiere cs5- every time I try I'm getting 'codec missing or unavailable' error message.. I have perian installed and some other codec packs I believe.
Do you have any experiences with cs5 and d300s videos? cs5 is supposed to have native support for them, right? WHat should I do to make it work?
thanks

Unless Nikon has changed things, those files are MJPEG in an MOV wrapper. Take a look at this ARTICLE, but am not sure if either of the suggestions are available for the Mac.
If you find that the Morgan and the MainConcept do not work on the Mac, but find an MJPEG CODEC, that does, please update this thread, so that I can add that link to the article.
Thanks and good luck,
Hunt
PS - VLC contains most popular CODEC's, so it will play material, that other players, and editors cannot, because the CODEC needs to be installed in the system for them.

Similar Messages

"Missing Codec" when importing QuickTime-Video into Premiere Pro CS5.5. What can I do?

Dear Adobe Community,
I tried importing a QuickTime-Video into Premiere Pro CS5.5, which did not work because there was a codec missing. What can I do now?
Thank you in advance for your helpful comments!
lots of love
Flora

Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Importing .avi file into Premiere CS5 and losing on quality

Hello Adobe users,
I'm having a problem with importing my material in Premiere CS5. It's file extension is .avi and I'm not sure which step I do wrong to get his but it's pretty important to me to find out what's the problem.
Every time I try to import material which was captured on another computer, I get it all lossy in Premiere and it's really obvious.
Maybe I make mistake with opening new project?
I'm not sure which camera is used, but I'm sure it's Panasonic and it films in cinemascope (widescreen).
I would really appreciate your help here!
Thanks in advance, Filip!

Flip,
Welcome to the forum.
AVI can hold all sorts of things, and those will be all important in addressing your problem. This ARTICLE goes into more detail, and shows how to "peek inside the AVI wrapper." Please let us know what CODEC is used in that file.
How are you Importing/Capturing the AVI file?
What Sequence Preset was chosen?
Good luck,
Hunt

How to import youtube video into premiere cs4

I installed adobe premiere cs4 and was really astonished by the fact that it's not possible to import a video downloaded from YouTube, but it is needed to convert it firstly. This application is weight about 3GB on my hard disk and now I must search for a plugin to import a video from YT.
It would be perfectly if i could download a video directly into premiere, and also upload finished file up to youtube.
The only result of my search is a paid plugin named moyea-importer - USD 70, but it seems it works only with earlier versions of premiere, before cs4.
Is there any free plugin for this task. Or any similar solution.
If not - in which format should I download youtube video, in which format should I convert it (what is the best converter for that) to make it editable in premiere.
Working on win xp sp3.
Thanks.

Also, CS4 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=all
Maybe a MOD will come along and move this discussion to the correct forum
As Mark says, CS4 is old... and CS5 and later were complete rewrites of the source code, to be 64bit instead of 32bit, so internal operations are not the same

Import mpg video into Premiere Pro CS6

When I try to import video taken with a Sony Handicam DCR SX63 I get a "There was an error decompressing audio or video". In searching this issue I find many people with the same issue but never a resolution. Is there one? That a novice could implement??
MPG format is clearly stated to be compatible. Copied directly from camera to computer via USB it plays just fine. Converting it to a different format (MP4) with DVDVideoSoft Free Studio I can import it into Premiere Pro and do my splicing / editing.
But.. my end result is not as clear (and files are much larger) so feel if I could use the original and stay in that format.. my results would be much better.
My project is very simple.. combine some clips, remove some bad footage and burn to a DVD.. any advice on alternate formats would be appreciated as well.
Thank you for your time
Ralph

Thank you for your time John.
Your last link deals with taking files off a SD card.. this is not my case but there is mention of renaming files creating a problem. So.. I re-download all my video from my camera using Windows Explore and copied the entire folder and root (Videos\MP_ROOT\101PNV01). My previous download using Windows Media.. did in fact rename the files. However I get the same error when trying to import with Premiere Pro.
In my previous searches for a solution I was pointed to your mediainfo applet.. running that on any of the newly downloaded video gives me this report: Open to more suggestions..
From MediaInfo:
General
CompleteName                     : D:\Videos\MP_ROOT\101PNV01\M2U00026.MPG
Format                           : MPEG-PS
FileSize/String                  : 77.7 MiB
Duration/String                  : 1mn 9s
OverallBitRate_Mode/String       : Variable
OverallBitRate/String            : 9 371 Kbps
Video
ID/String                        : 224 (0xE0)
Format                           : MPEG Video
Format_Version                   : Version 2
Format_Profile                   : Main@Main
Format_Settings_BVOP/String      : Yes
Format_Settings_Matrix/String    : Custom
Format_Settings_GOP              : M=3, N=15
Duration/String                  : 1mn 9s
BitRate_Mode/String              : Variable
BitRate/String                   : 8 929 Kbps
BitRate_Maximum/String           : 9 100 Kbps
Width/String                     : 720 pixels
Height/String                    : 480 pixels
DisplayAspectRatio/String        : 16:9
FrameRate/String                 : 29.970 fps
Standard                         : NTSC
ColorSpace                       : YUV
ChromaSubsampling                : 4:2:0
BitDepth/String                  : 8 bits
ScanType/String                  : Interlaced
ScanOrder/String                 : Top Field First
Compression_Mode/String          : Lossy
Bits-(Pixel*Frame)               : 0.862
TimeCode_FirstFrame              : 00:00:00:00
TimeCode_Source                  : Group of pictures header
StreamSize/String                : 74.0 MiB (95%)
Audio
ID/String                        : 189 (0xBD)-128 (0x80)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Format_Settings_ModeExtension    : CM (complete main)
Format_Settings_Endianness       : Big
MuxingMode                       : DVD-Video
Duration/String                  : 1mn 9s
BitRate_Mode/String              : Constant
BitRate/String                   : 256 Kbps
Channel(s)/String                : 2 channels
ChannelPositions                 : Front: L R
SamplingRate/String              : 48.0 KHz
BitDepth/String                  : 16 bits
Compression_Mode/String          : Lossy
Video_Delay/String               : -70ms
StreamSize/String                : 2.12 MiB (3%)

I am trying to screen capture a simulation session in captivate 6 and then edit it in premiere pro cc 2014 when I import the video into premiere, it is blurry

Caveat - I am relatively new to adobe captivate and premiere, so hopefully this is a simple setting issue that I have not been able to figure out. When I do a video capture in captivate 6 the output mp4 is very clear. If I play it in windows media player it is crisp and clear. If I import that same mp4 into Premiere Pro CC 2014, it is very blurry. My simulation has gauges and dials that need to be clear and I need to "mix" audio, narration, and system sounds into this video. Any help would be extremely appreciated!

OK - back to my caveat. When I select preferences in Premiere and look at the playback setting, I get options for Preroll, Postroll, Step forward/back many, mercury transmit, Audio device, Adobe DV and disable video output when in backgroud (all of which I am not smart enough to comprehend).
I apologize for my ignorance. So as I continued to read your question, I, of course googled "how to set playback resolution in premiere pro" and I learned how to do that.... They were set to 1/2. I adjusted to full and it seems to be clear now.... I think you just helped me, help myself. Thank you! Did I get it right? Is there any more you can recommend when it comes to taking a screen capture video and making it into an awesome demo?
Thank you, Thank you, Thank you,
Troy

Importing Youtube videos into Premiere Pro results in picture quality loss - how to prevent this?

I have imported several downloaded youtube videos in 720 or 1080p into Premier Pro but when playing in the video editor the picture quality is a little blurry and not as sharp as the original video is on youtube. Is there a way to import the video onto Premier Pro without losing the original quality?
Many thanks to anybody who can provide any guidance.

Whenever Premiere plays back video, it's going to appear to be of lower quality than the original. This doesn't mean that any quality has been lost, and when you export you will have your original quality again.
Just make make sure that the dropdown in your monitor next to wrench icon is set to "Full." If it's set to "1/2" or "1/4" that means playback will be really low quality (to speed things up). Even at full though, it will be a little less sharp than the original when it's playing. When you pause, then you'll see the original quality again.

Import Silent video into Premiere

I am making a simple video. I have one track of video of a speaker with the audio (separately recorded and replacing the audio that came from the video cam). And I am trying to lay on another video layer to cut in and out with the speaker. I screen recorded a slide presentation while they were speaking with Quick time. I'm trying to import it but Premiere won't accept it because it doenst have audio attached to it. What can I do to Import this video file?

I am using Premiere CS6
It's giving this error message...

Import VOD files into Premiere CS5

I'm editing a documentary in which I needed to import a few promotional DVDs and although all of them eventually worked properly, theirs still one DVD that's giving me issues. It'll go in properly when I rename them to .mpeg but each file only has several seconds of audio each.
Is their anything I can do to get those files in properly without doing any converting beforehand?
I had an audio issue once before with CS4 and I can't believe I'm having one again with CS5. At least it's proven to be much better than CS4 but I just wish I would never have to deal with that again. What's funny is that it happened when I was editing my first documentary and now that I'm editing my second documentary it had to happen again. I've never had audio issues editing events.

FWIW, I recently completed a project using files imported from a DVD. You don't even need to transfer the files to a HDD.
It's perfectly OK to work from the DVD drive.

Some problems to import AFX CS6 file into PREMIERE CS5

Hi and thank you for your help
My problem after an update from AFX CS5 to AFX CS6:
I work with Premiere CS5. I arranged some clips X, Y, and Z. Now I would like to transform clip Y into an AFX compositon. I have PREMIERE CS5, AFX CS5 and AFX CS6. If I click "transform into AFX composition" AFX CS6 will open. Now I could do my work in AFX CS6 but when I'm finished and go back to PREMIERE. PREMIERE CS5 wont work with this new AFX CS6 file. It appears an empty dialog box with COMPOSITION but there is no COMPOSITION I can select.
My question:
I work with PREMIERE CS5 how can I change the AFX version from CS6 back to CS5 ?
Thank you very much folks!!

Just to clarify... you are asking how to change the dynamic link out of Premiere so it opens AFX CS5 instead of AFX CS6, correct?
Sorry to say I do not have an answer to that. But if you are working with just one clip ("Y" in your example) then you could begin a new AFX CS5 project (through the normal AFX open process), import that one clip, do your thing, save it, and then import the AFX CS5 project into Premiere CS5. Not as elegant as what you hoped for, so hopefully someone can answer your original question.

Unable to import .mp4/.ts into Premiere Elements 3.0

I've captured footage from my PlayStation 3 using this device: http://gamerzone.avermedia.com/game_capture/live_gamer_portable
The device saves the footage in a .ts file.
I've tried to get information on the file using a program. If there's a better way to do it, please let me know:
When I try to import the file into Premiere Elements 3.0, I get an error message: "File format not supported/One of the necessary components may not have been installed."
I've converted the file into an mp4 format with this program: http://ftp2.avermedia.com/C875/C875_utility_v1.0.0.9_20131029.zip
Information on the file:
But this did not solve the problem.
Ideally, I would like to avoid converting the video file, if that would take up a lot of time. If I can just upgrade Premiere Elements, that would be the most ideal solution.
Please let me know if any additional information is needed.

Akvod
I am able to import a .ts file into Premiere Elements 10, 11, and 12 Windows 7 64 bit.
But, not so, for Premiere Elements 4, 7, 8, and 9.
And, the reason why your .mp4 conversion did not work would be in accord with the fact that you used AVCHD as the video compression, and AVCHD video compression was not supported by Premiere Elements until version 7.
If you do decide to move to version 12, please note that there is a dramatic difference in workspace between 3 and 12. So, go the free tryout of 12 before any purchase.
You could try to convert the .ts to H.264.mp4 and not AVCHD (MPEG4 AVC/H.264).mp4 and see if that works for you.
ATR

How do I import animated gifs into Premiere with a transparent background?

I have an animated gif that I got from the internet, and I'm trying to import it into Premiere Pro with a transparent background. The gif is of a video game character standing still and blinking. Whenever I import it, it always has a white background, so I need help on how to change that.
I've gone into Photoshop and removed the white background frame by frame, making it transparent. I do this by using the magic wand tool to select the white background, then hit "delete" to turn it into that diamond grid, which means it's transparent. I then select File -> Save for Web. I preview every frame, and it shows that the backgrounds are transparent. I save it as a gif. But when I import it into Premiere Pro, the white background is still there.
I've read many forums online about people trying to import images into Premiere Pro with a transparent background, but none of them have explained how to do it specifically for animated gifs. Every answer has always been "export the image as a png, that'll work", and sure enough, I exported a few frames of the gif as pngs, and those few frames had transparent backgrounds in Premiere Pro. But I don't want a png because those aren't animated sequences, those can only be still images. I need to export it as a gif so that it will remain animated, but gif files always have that dreaded white background in Premiere Pro.
I suppose I could export every frame as a png, import each of those frames into Premiere Pro, then string all the frames together and tweak them so they'll be functionally identical to the animated gif, but that would take forever. I'm making a video project and I need numerous animated gifs to work with, so I don't want to do that with every single one of them. I'm looking for a way to simply import the gifs into Premiere Pro and be done with it. If there is any way to do this, please help me.
-Robert

faind on gif transparency and other cartoon animation problems : Adobe After Effects
" The reason: GIFs don't support alpha channels. Instead, their file structure assigns a certain color value to be read as totally transparent. There aren't any degrees of transparency as you find in graphics formats that do support alpha channels.
To use an animated gif in AE, you'd first have to create the areas of transparency, then convert the series of images into a graphics format that supports alpha channels, and there are a bunch: PICT, TIFF, TARGA or PNG, to name a few."

Is there a way to import ONLY videos into PE8, not photos?

I have a million photos I never intend to use in a Premiere Elements 8 production. Using the PE8 "Organizer," is there a way to import ONLY videos into PE8, not photos?

I do not use Organizer, so may be missing something, but I would guess that one could Sort By, and choose File Type. Remember, Organizer is for the system, and does not reflect what is Imported for use in a Project - two different things. In lieu of Organizer, I use Adobe Bridge, installed with some of my other Adobe programs.
I would also assume that Organizer does things via folders. If one does not have any aspect set to auto, I would think that it would ONLY do thumbnails for certain folders, as directed. If one has their stills in other folders, then only AV Assets would be seen by Organizer.
Maybe some Organizer guru will have better directions for you. I am just thinking here and speculating.
Good luck,
Hunt

Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

You can easily (and better, IMHO) do what you want in Adobe Prelude. It's part of the CC subscription, and may have been included with CS6.
Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips. Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting. Don't select the Transcode option.
Cheers,
Jeff

I am trying to import a video into Premier Elements 11 and keep getting an error message

I'm trying to import a video into Premier Elements 11 and keep getting an error message but it doesn't say what the error is.

This is the Photoshop Elements forum. You want the Premiere Elements forum:
Premiere Elements

Importing d300s videos into premiere cs5 (os x)

Similar Messages

Maybe you are looking for