Importing Data into MDM
Hi SDNers,
I am facing a Problem. In my repository I have a filed called Date of Birth.
while importing data into MDM if the input file is having data as 00000000 fro Data of Birth MDM accepts this date. If Date of Birth is 00000000 the data should not save in the record.
I Need to write a Validation for this or what I want to do.
Any suggestions.
Thanks
Ravi
Hi Ravi,
Even if your source file has the date in any format, while performing the import it will give you an error saying "Failed to convert date values".
You need to convert this date in the required format, default being mm/dd/yyyy.
To change the default setting go to the configuration option in Import Manager, you will find the date format option.
You can select the required formats like yyyymmdd or dd.mm.yyyy.
Note that this value conversions are necessary only if you have defined your field of date type.
If you have defined it as text, it will accept the date in any format.
Hope it helps.
Thanks,
Minaz
Similar Messages
-
Hi All,
I have 2 question regarding Key Mapping, while importing data via Data Manager. We are using SAP MDM 7.1 SP04 (117)
1. Load data to a Lookup table, from 2 different source system. I have an Lookup table, to which i will have to load data from 2 different systems say A, B
and both A and B has a different Key, which i will have to store in the Remote Key.
How to Import this data
Remote System Remote Key Name Code
1. A 1 AAA A1
2. B 2 AAA A1
In the above example, same code and Name has 2 different Remote system and remote key... how to load this data to MDM using Import Manager
2. Load data to Main table for lookup fields. I have a set of lookup tables, for which the data are loaded from system A and say remote Key 1.
But, the data to the main table comes from System B, so the data for these lookup fields are not getting mapped automatically, as it doesnot find the remote system in that lookup. How to load the data, to these fields in the lookup, automatically, without doing a manual value mapping.
Thanks,
Priya.Hi Priya,
If these Systems A and B are SAP systems, then you should go for MDMGX T-code, for reference data (look-up data) into MDM. Importing look-up data from SAP systems using MDMGX is the Recommended/Standard way. You will then import this reference (look-up data) from both of these systems using Remote Key Concept and you will not face this difficulty. Here you will not face any issue, look-up values get automatically mapped whether Main table data comes from System A or System B.
If you have Source file with four fields as given below:
Remote System Remote Key Name Code
1. A 1 AAA A1
2. B 2 AAA A1
Then Segregate Records on the basis of Remote systems with two files, one file which will contain records pertaining to Remote System A only and other file contains records with Remote System B only.
Now, Import the data using import manager remote system for these two files separately for Remote System A and Remote System B using Remote Key concept. Once you Import data in this way, you will see both these Remote Systems with key (I mean two values) in Edit Key mapping when you right click on any record of this look up flat table using MDM Data Manager.
Here you will see Remote system B with Key 2 also.
Other alternative, You can also add these Remote key values for System B manually using MDM Data Manager Edit Key mapping. But it will take time to add value for each of records for this look-up flat table for Remote System B.
Your problem for importing main table records from Remote System B will be resolved because now these look-up values get automatically mapped as remote key for both systems maintained into look-up tables.
Regards,
Mandeep Saini -
Is it possible to import data into an existing table?
Hi.. everyone.
Is it possible to import data into an existing table
by using import utility?
The exported table and the existing table have the same name
and table schema.
I want to append "new data(exported from oracle8.0.5)" to
"an existing partitioned-table" by using "oracle 9i import utility".
Thanks in advance.
Have a nice day.
Ho.SQL> select index_name
2 from user_indexes
3 where table_name = 'IMPORTPK';
INDEX_NAME
SYS_C007610
SQL> create view importpk_view as select * from importpk;
View created.
SQL> disconn
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
SQL> exit
C:\>exp userid=oracle/oracle tables=importpk
Export: Release 10.1.0.2.0 - Production on Tue Sep 5 08:30:50 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table IMPORTPK 10 rows exported
Export terminated successfully without warnings.
C:\>imp userid=oracle/oracle tables=importpk ignore=y
Import: Release 10.1.0.2.0 - Production on Tue Sep 5 08:31:12 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing ORACLE's objects into ORACLE
. . importing table "IMPORTPK"
IMP-00019: row rejected due to ORACLE error 1
IMP-00003: ORACLE error 1 encountered
ORA-00001: unique constraint (ORACLE.SYS_C007610) violated
Column 1 1
Import terminated successfully with warnings.
C:\>sqlplus/nolog
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Sep 5 08:33:20 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
1.No
Note : if table content primary key and index.
SQL> conn oracle/oracle
Connected.
SQL> create table withoutcons ( no number);
Table created.
SQL> insert into withoutcons select * from importpk;
10 rows created.
SQL> create view withoutcons_view as select * from withoutcons;
View created.
SQL> disconn
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
SQL> exit
C:\>exp userid=oracle/oracle tables=withoutcons
Export: Release 10.1.0.2.0 - Production on Tue Sep 5 08:36:05 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table WITHOUTCONS 10 rows exported
Export terminated successfully without warnings.
C:\>imp userid=oracle/oracle tables=withoutcons ignore=y
Import: Release 10.1.0.2.0 - Production on Tue Sep 5 08:37:17 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing ORACLE's objects into ORACLE
. . importing table "WITHOUTCONS" 10 rows imported
Import terminated successfully without warnings.
2. Yes
If table content no unique constraints
Message was edited by:
user526020 -
Importing Data into Sql Server 2012 from Excel Data
Hi,
I got errors like this when i am doing import data into sql server from excel Data. Can you please help us?
- Executing (Error)
Messages
Error 0xc020901c: Data Flow Task 1: There was an error with Source - demotable$.Outputs[Excel Source Output].Columns[Comment] on Source - demotable$.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one
or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
Error 0xc020902a: Data Flow Task 1: The "Source - demotable$.Outputs[Excel Source Output].Columns[Comment]" failed because truncation occurred, and the truncation row disposition on "Source - demotable$.Outputs[Excel Source Output].Columns[Comment]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - demotable$ returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)Are you attempting to import into a newly made table or into an existing table? It looks like it's trying to insert data where it cannot be inserted (invalid column or lack of data size in your column).
Try the following:
1). In your excel sheet, highlight the whole sheet and make sure the cells are in 'text' form and try re-importing
2). save the document as ms dos TEXT and import as a text document.
3). double check your columns are correct for the data, for example if you have a column that has a string of 100 characters and your column is 'NvarChar(90)' - that might cause the error? Or just correct data type in your column
3). If that doesn't work and you're inserting into a new table, try importing it as string first and writing a query to insert columns that should be float/integer or whatever. You may want to convert float texts to a 'bigint' first rather than string
> float as that can cause problems if I remember correctly. -
Import data into oracle from a text file?
hi guys,
How can we import data into oracle9i release 1 from a text file with comma seperated or tab seperated delimeters?
please help,
Imrantable is already created, just have to populate data into table through a dat or text file. As suggested, you would either:
1). use SQL*Loader to load the data into this table.
2). create external table on that data file and then do:
INSERT INTO your_real_table
SELECT * FROM that_external_table ; -
What is the best protocol to import data into sqlserver using an SSIS Package?
Im trying to import data into SQL Server from EXCEL with an SSIS package. In my data flow I am using "Excel Source" object and an "OLE DB Command" object. Im getting the following error message, "...Excel Connection Manager"
is an incorrect type....." May someone explain why I get this and point me in the right direction in choosing the proper source for my package so I can complete my task. Thanks.Hi jsorrisone,
The data type mismatch issue is a common issue when using Excel Source in SSIS. The Excel driver recognizes only a limited set of data types. The following section of the document
Excel Source should point you in the right direction:
The Excel driver recognizes only a limited set of data types. For example, all numeric columns are interpreted as doubles (DT_R8), and all string columns (other than memo columns) are interpreted as 255-character Unicode strings (DT_WSTR). Integration
Services maps the Excel data types as follows:
Numeric – double-precision float (DT_R8)
Currency – currency (DT_CY)
Boolean – Boolean (DT_BOOL)
Date/time – datetime (DT_DATE)
String – Unicode string, length 255 (DT_WSTR)
Memo – Unicode text stream (DT_NTEXT)
Integration Services does not implicitly convert data types. As a result, you may need to use Derived Column or Data Conversion transformations to convert Excel data explicitly before loading it into a non-Excel destination, or to convert non-Excel data
before loading it into an Excel destination. In this case, it may be useful to create the initial package by using the Import and Export Wizard, which configures the necessary conversions for you. Some examples of the conversions that may be required include
the following:
Conversion between Unicode Excel string columns and non-Unicode string columns with specific codepages
Conversion between 255-character Excel string columns and string columns of different lengths
Conversion between double-precision Excel numeric columns and numeric columns of other types
If you need further help, post the complete error message as well as the data nature in your Excel source file for further analysis.
Regards,
Mike Yin
TechNet Community Support -
How to bulk import data into CQ5 from MySQL and file system
Is there an easy way to bulk import data into CQ5 from MySQL and file system? Some of the files are ~50MB each (instrument files). There are a total of ~1,500 records spread over about 5 tables.
ThanksWhat problem are you having writing it to a file?
You can't use FORALL to write the data out to a file, you can only loop through the entries in the collection 1 by 1 and write them out to the file like that.
FORALL can only be used for SQL statements. -
Importing data into tables with grant access (sql developer 3.2)
Hello,
I want to import data into a table PAY_BALANCE_BATCH_LINES which is an interface table. I'm logged in to a schema (APPS) and this table belongs to the HR schema. However, if you look at the grants, the APPS schema has all access to this particular table. In TOAD, this used to work great.
But in sqldeveloper, when I filter the tables dropdown, I am not able to find this table. Since this is my primary way of uploading data I'm not sure how else I can get access to upload data into this table. I don't know the password for the HR schema by the way.
Is there a way out?
Many ThanksScroll down the tree to the 'Other Users' node, expand it, and then drill down into HR > Tables. Then do your import.
For an alternative browser, right-click on your connection in the tree and open a Schema Browser. -
Importing Data into Apex 3.0.1
I know that this question has a simple answer, but here goes. I know how to import data into oracle using sql loader and sql insert commands but can Apex import data into a blank application form with multiple rows of data to import.
Like:
U_Id L_Name F_Name City State zip
15 Taylor Joe Atown Mi 42333
16 Jones Jim NewT Ky 43211
and 200 or 500 or more columes
Again I know how to import into Apex to create a new form from a spreadsheet or access, but I don't know how to move raw data from a text file into Apex.
Can this task be done.
Thanks,
TimTim,
When an application is first created the developer has to specify the schema that will be used to parse (compile) all the code against. All you need to do is to use your existing knowledge of importing data into Oracle and import the data you want into the Parsing Schema of the application. Use Application Definition to find the parsing schema for your application.
Sima -
Importing data into an existing table from excel problem
Hopefully I am posting this in the right place..
I am having trouble importing data from Excel into an oracle table using the 'import data' wizard in SQL developer.
The problem is that the I want to import data into a table which all ready has data and I want the new data to be imported into the first row of the table not in a new row at the end of the table.
This is probably best shown by example:
create table todelete (
site_no varchar2(2),
data1 number,
qa number);
insert into todelete values ('w1',1,null);
insert into todelete values ('w1',2, null);
insert into todelete values ('w1',3,null);
Now I want to import the following data from excel into the QA column starting at w1:
SITE_NO
QA
w1
4
w2
4
w3
4
However, when I import the QA column it goes into a new row:
SITE_NO
DATA1
QA
w1
1
NULL
w2
2
NULL
w3
3
NULL
NULL
NULL
4
NULL
NULL
4
NULL
NULL
4The problem is that the I want to import data into a table which all ready has data and I want the new data to be imported into the first row of the table not in a new row at the end of the table.
No - the PROBLEM is that a table does NOT have a 'first' row or a 'row at the end of the table'.
Rows in a table are like balls in a basket; there is NO 'first' ball.
As already suggested please mark this thread ANSWERED and repost it in the sql developer forum where it belongs. -
Automatically import data into SAP
Hi Experts,
I know B1iSN can. Is there any other way to import data into SAP automatically? Add-on? e.g Just update one field in SO header?
Thanks.
Regards,
ChristinaHi,
Check this link
[DTW Schedule Run|https://websmp110.sap-ag.de/~sapidb/011000358700001820962008E.zip]
Regards,
Bala -
Import data into an MS Access database
How I can import data into an MS Access database form a PDF form?
Any sample to get start I'll appreciate.
ThanksTo my opinion, there are 3 potential approaches :
1. rewrite the application, that data are stored directly in the oracle database
or the program writes flat files somewhere to the file system which are able getting
imported from the target instance on daily basis or job driven;
2. The "Access-driven approach" : link oracle tables into the MS-Access application
using an ODBC-connection and build a macro in Access which is exporting the stuff to
the target instance; in order to do so, the Oracle Client and ODBC-Drivers needs to
get installed on the PC where MS-Access is started to start the exportation process
(which is probably yours).
You may then create tables in the target instance and link them from within Access
using ODBC as the datasource
3. The "Oracle driven approach". explained in detail here, never tried it, but maybe
worth a look
http://www.orafaq.com/node/60
Basically, install the Oracle Software on a PC, configure an ODBC-Connection and start a
Listener there;
The target instance (which may no run on a UNIX system) is now able to commuincate
with the local running listener on your PC which itself is instantiating a connection to
the Access "Database" using the ODBC-Connection.
In this way, your PC acts as a database server from the Oracle Net point of view.
In theory, this could even work, depending on the ability to connect from the
instance server directly to the given IP of your PC (Security ?? Hmmmz) -
Hi experts,
I know I can import data through DTW. but since it has fixed format of template. how can I import data into user-defined fields?
Thanks...Hi Vic,
Open the DTW, Log on to a company,
Under the menu --> Advansed, click on the Maintain Interface.
A window appears
Select the Object from drop down field, Ex. oBusinessPartners,
Click on the + Sign next to the expand the desired object.
You can find all the Userdefined fields there in the tree view.
Right click on parent node of the Tree and click on Create Template for the structure.
A Save As window appears to save the new template,
Give the path and save the file,
Now the new Template contains all the Userdefined fields also.
Regards
Reno. -
How to import data into taxonomy tables
Hi ALL,
Can anybody suggest to import data into taxonomy tables.Please send me any documentation related this.
Regards,
Ravi.Hi,
I hope following URL may help you.
Taxonomy Import:
http://help.sap.com/saphelp_mdm550/helpdata/en/09/322ad42c864bf79892af2123525b6f/content.htm
Importing Hierarchy:
http://help.sap.com/saphelp_mdm550/helpdata/en/36/c4c97f96484f438c2d5c96171cdd6f/content.htm
Importing Attributes:
http://help.sap.com/saphelp_mdm550/helpdata/en/bd/f768fd70d945ee873712304127493b/content.htm
Importing Attribute text Values:
http://help.sap.com/saphelp_mdm550/helpdata/en/52/2086075c584d96be102512036b9c0c/content.htm
Importing Attribute Links:
http://help.sap.com/saphelp_mdm550/helpdata/en/26/17f916867344afbdfcf7d629035c83/content.htm
Regards
Nisha -
How to import data into taxonomy tables and qualified tables
Hi ALL,
Can anybody suggest to import data into taxonomy tables and qualified tables, when is value mapping neccessary and what is partitioning? and what is the use of that partioning?Hello rehman
even i am facing same issue regading import of data in taxonomy table
. can we do it through import manager.
please provide me some details i will be very very thankful to u
my email - [email protected]
Thanks & regards
Himanshu
Maybe you are looking for
-
Some songs don't show up on my iPod at all.
And other songs show up, but only in the song section, not the artist section...I'm thinking this MAY have something to do with faulty id3 tags, but I'm stumped as to how to fix it. Please help shed some light on my problem, thanks.
-
I synced my new iPad with my new macbook and when I tried to then sync my iPhone as well it says that all apps will be replaced with apps in my library. How do I sync without losing all of my existing iPhone apps?
-
Polish Characters are extracting as # values
Hi All, We are facing an issue while extracting Polish characters (Names) from HCM system. The Source system has proper Polish characters but when extracting into BI, it displays as # values in place of polish characters. The BI system has Po
-
After Effects 3-D Movement Help?
http://imageshack.us/photo/my-images/542/aftereffectshelp.png/ Basically, I've created some text and made it 3-D layer on After effects. Im trying to get the text to pan across the screen, but as you can see by the red line showing the movement, it i
-
How do you downgrade to the free option or get refund? After selecting free the done button can not be pressed.