Importing deleted project from IDE

actually i have deleted my prject from the IDE but it remain in the my work sapce. i want to import it again..can anybody pls tell me..i am new to this IDE

You should be able to either use the {File | Reopen} menu, or {File | Open} and select the workspace's *.jws file.

Similar Messages

Importing a project from RH 6 to 9

Hi There
I am trying to import a project from RH 6 to 9. I have managed to do it successfully once but when click to Open a Recent file Online Help HHP file I get an error message "No current file". I have tried to Import HTML Help Project I get the same message. Any ideas?
Thanks
Melissa

Opening the .xpj file should just work. Can you provide detailed steps of what you are doing?

Import SAPUI5 project from Eclipse to Appbuilder

Hello everyone,
Is it possible to import a project from Eclipse into Appbilder? I have tried but I can not manage to get it to work. I read somewhere online that Appbuilder only supports HTML view, is that why I can't import my project?
I also tried to create a new eclipse project with HTML view just because I wanted to try to import it...it didn't work though.
I just want to know if it's me doing something wrong or if if it just isn't supported :-)

For your information:
I have searched and come to the conclusion that it is not possible to import projects from other IDE's into AppBuilder.

Is there a way to import a project from iOS iMovie 2.0 to OSX iMovie 10.0.3?

Is there a way to import a project from iOS iMovie 2.0 to OSX iMovie 10.0.3?
I can get the project file on my MacBook desktop, but can't find a way to import it into iMovie 10.0.3

No you can not.
You can connect USB 3 components to you MB if you wish to use them but will only run at USB 2 specs.

I am trying out Final Cut Pro X and trying desperately to import a project from iMovie 11 (version 9.0.9). There is no export to FCPX in iMovie 11 nor is there import from iMovie in FCPX.

Can someone please help me?
I am trying out Final Cut Pro X on a 30 day trial. So far so good.
I am now trying desperately to import a project from iMovie 11 (version 9.0.9) into FCPX.
I have read multiple posts on this subject and they all recommend File/import/ from iMovie project in FCPX
However there is NO such option under File/import in FCPX - nor is there an option to export to FCPX in iMovie 11
Can anyone please enlighten me.

The current version of FCPX does not work with that version of iMovie. You need version 10.0.3, which allows you to send a project to FCP.

Transitions don't work after importing a project from Premiere to AE

I've imported a project from Premiere CS3 to AE CS3 and all my transition (fade + wipes) are now solids and they don't work on timeline or on exports, but they still show in my sequence.
How can I make AE use those transition again so I don't have to go through all project and keyframe transitions.
Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
Thnak you for your time and interest in my problem.

fredou_79 wrote:
Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
Exactly the problem. AE is only to able to translate a few transitions, which include the normal cross-disolve, linear wipe, dip-to-color and a few others, but since those routines are hard-coded in the Premiere Pro Importer, they have no way f doing the same for third-party products. So more or less you will have to rebuild your stuff, either by using the proper transitions in PPro or in AE.
Mylenium

How to delete project from dtr

HI, how can i delete project from dtr?thanks

Hi Lei,
Please check the following links.Also the SAP Note 864515 explains how to delete a development component.
How to delete Development Components in NetWeaver Java Development Infrastructure (JDI)
Regards,
Yasar

While deleting project from CJ20N entries are not deleted from table PRPS

Hi,
I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
Any deletion Flag should also be checked?
Thanks in advance!
Regards,
Jyoti

Hello,
Thanks for reply !
My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
Why they are appearing in PRPS table and how it can be deleted?
Thanks !

How do i import XML-project from imovie with the clips being apart? And not imported as one big clip...

Hello!
I have a problem with my final cut express. I want to import my project from iMovie (multiple clips in one project) without the clips together as one big clip.
Important: XML-from imovie
This had worked before but one day a note showed up at the screen saying:
If i choose yes the project becomes one big clip and if i choose no this error shows up:
and the project wont be imported.
Help me please! This has never been a problem before.
Sorry for the bad english, i am from sweden.
Thanks! //Karl Ekdahl

Hello!
I have a problem with my final cut express. I want to import my project from iMovie (multiple clips in one project) without the clips together as one big clip.
Important: XML-from imovie
This had worked before but one day a note showed up at the screen saying:
If i choose yes the project becomes one big clip and if i choose no this error shows up:
and the project wont be imported.
Help me please! This has never been a problem before.
Sorry for the bad english, i am from sweden.
Thanks! //Karl Ekdahl

Can I import a project from laptop which has same file names as existing

Im about to import a project from Aperture on my on-road laptop to my main Aperture library on my studio Mac when i realised that the new camera i purchased for the road trip has named the files exactly the same as some files (but different pictures) which already exist in my studio Mac. Even though they exist in different projects, what will happen if i import the new project into my main Aperture Library?

Hi Sunspeaks;
I just had a similar problem. Since I had my MBP on the trip, we were downloading our photos to Aperture there in projects. When I returned home I discovered we had with photos with the same names but different project names. I was able to import everything into Aperture without any trouble. For my own sanity I did a batch rename to change the photo names in Aperture after the import.
Allan

How to delete projects from Vault

Ok, here is the issue.
I work remotely on a laptop and my main library and vault are on my home computer.
I only keep the last couple of projects on the laptop and use the vault to backup those projects. I used managed files.
When I get home from the road, I export/import the projects to the home machine and master library to do further work and use vault on an external for backup.
So, on the laptop, I will delete projects to make more space on the hdd and I dont need them on the laptop any longer (they are already in the master library and vault at home).
However, the problem is that when I delete those projects and then update the vault, it does not seem to delete those projects in the vault. So the vault just keeps growing in size until it fills up and I cant seem to delete those projects from the vault. Again, both the laptop library and the laptop vault are simply for backup while on the road so I'd like to have the vault on the portable be able to stay synced with the library on the laptop. When I delete a project, it does the same in the vault to keep the external space consistent as well.
Is there any way to do this? Shouldnt the vault basically just back up the library and when something is deleted from the library it should be deleted from the vault as well?
As it is, I need to delete the entire vault when it fills the external and create a whole new one after deleting the projects from the library.
Is there an easier way?

I have not contacted AppleCare, but will if this is how its working for others.
Have you tried this and are sure it is working that way? After all, last week after deleting three projects from the laptop and main library and then updating the vault, I had a vault that was over 80 gigs in size while the library was now less than 20 gigs in size.
After deleting the vault and starting a new one, the new vault was approximately the same size as the library, actually slightly smaller like it is with the master vaults at home with the main library.
I have twice now had my external fill up with the vault while I had been constantly deleting old projects on the laptop. So it just seemed to keep adding new stuff to the vault, but not get rid of the old that I was deleting.

Importing archived project from DVD

I used burn disk to arcive a project to a DVD. That seemed to work fine.
I then started a new project and tried to import the "archived project from the DVD and I keep getting this error:
The file could not be imported: The file “Macintosh Hard Disk/Volumes/Media Drive/Home movies/Billie Jo awards” can’t be imported; QuickTime couldn’t parse it: -43
So far I am unable to import this DVD or anything else into iMovie
Any Ideas?
David

Your Archived DVD Project will only open in iDVD.
To access the video you will need the burned copy of the DVD
To import your DVD you will need a DVD ripper. I use Mac the ripper http://www.versiontracker.com/dyn/moreinfo/macosx/22715.
If you want to only import the video (to edit or watch on your computer) chose in mode chapter extraction and select the ones you want (yes you can select them all). Then you will need to condvert the .VOB file (found in the video_TS file) to a .MOV or H264 using FFMpegX http://ffmpegx.com/download.html. If the binaries dont work just press cancel (you dont need them for this conversion). Then import your .MOV or .MP4 file into iMovie.
That should do it
eMac Mac OS X (10.4.8) 1.42Ghz PPC G4

How can I compile my imported Catalyst project from FB to Android?

Hi Guys,
I started to play with Catalyst (Panini), and I got very excited by it, and wound up building a full very polished app. All the while, I had the idea I would import this into Flash Builder, then compile from there it to run on Android. However, when I actually went to do this, there was no option in FB (Burrito) to build my project as a mobile one. If I create a new project from scratch in FB, then I get the mobile option. But I cant seem to make my imported catalyst app show up any mobile build options as all - only web project ones. Its very frustrating, as I have made standalone test SWFs and dropboxed them onto my phone - and the app works well!!
Im sure I have missed something really simple - can anyone point me in the right direction? I suspect it might have something to do with creating a build profile? Or is there a config I missed in Catalyst? Im no dev-head - so those FB build config screens look a bit intimidating. I might eb able to muddle my way through configuring my Andoind SDK as a build profile - if thats whats I need to do? All help greatly appreciated!
Cheers

Well, no answers here.
I had sety up all my content in a layered Pshop doc first (As Catalyst doc design reccommends). So I have imported that into Flash and I will re-do the animation in Flash to get it onto the Android platform. Its very disappointing as the Catalyst workflow was really appealing, I found I could focus on the content and not worry too much about doing the wrong thing setting up the interactivity.
Flash Builder on the other hand isnt very Designer freindly at all. Once I got there with my project, I was sweet out of luck getting it anywhere else. Im going to use Flash because it looks like the workflow in the Flash packager for Android is easy to understand and follow.

Importing a project FROM Premiere Pro to FCP - Any alternative to EDL ?

Hi, when I google this issue - trying to get a project from Adobe Premiere Pro (for instance CS4) to Final Cut I am always terribly frustrated to find only references to the fact that APP imports XML (and now in 4.01 with better support for Final Cut Pro XML). But APP only exports EDL, and that is a very limited platform for talking accross the programs. Does any one have a better solution? Is there any external software for converting an APP project into XML? Can anyone hint as to why Adobe doesn't include "export to xml" in the export menu (like Final Cut Pro so elegantly does) other than fear of people taking their projects and running away to Final Cut Pro (which doesn't make any sense at all, and is no way of dealing with users' needs). Because it would seem that they only want us to be able to move stuff from FCP to APP. But what about us, who desperately need to move in the other direction?! Any light on this matter would be greatly appreciated.
Cheers and a happy 2009.

+I would indeed like to do this test. To what email do I send a zipped file to?+
http://www.automaticduck.com/contact/
+And also, if I may keep bothering you on this issue: Granted that APP projects are XML, still, Final Cut Pro projects and Avid Projects are NOT XML, they can just interact well with certain forms of XML (type 1,2,3 etc, but apparently not prproj), correct? (a curiosity)+
Correct, Final Cut Pro project files and Avid project and bin files are not XML. Final Cut Pro has the ability to export and import XML files that are formatted as XML. XML is a flexible file format, the files can web pages, preference files, document files, just about anything. Apple has defined an XML format that can be used to interchange project data with Final Cut Pro. For a lot of good reasons it doesn't make sense for third parties to write or read FCP project files directly so Apple developed a method to write and read project data through another format. XML is an excellent choice because it is so easy to work with, XML files are simply text, easily read and edited and written. Avid systems use another file format for interchange with other manufacturers, AAF. AAF is not XML.
A lot of editors first heard of "XML" via Final Cut Pro's use of it as an interchange format, so it isn't surprising that these editors equate XML with FCP. It is a bit pedantic of me to drive home the point, but I just want you to clearly understand the issue.

Importing a project from Sony Vegas

I'm trying to import a project that was initially edited in Sony Vegas to do audio and color correction in Final Cut. Apart from rendering the project out to an HDV tape, and re-importing it into Final Cut through Log and Capture, what is the best methodology so as to retain the most data for timelines, etc.
We can even go so far as to have the original hard drives, but I just can't fathom how to migrate into final cut.
Suggestions?

The back to tape method sounds good. Otherwise using flip4mac to import an intermediate AVI's is also good.
Does Vegas export EDL's ?

Importing deleted project from IDE

Similar Messages

Maybe you are looking for