Importing desktops doesn't work

I exported some desktops from the Mac client and tried to import them on another Mac client but it doesn't let me import them at all. In the import dialog they are greyed out.

Hi,
Which version of MRD MAC you are trying to access?
Might possible that during exporting of desktop the file got corrupted and can’t see the resultant folder\file to import. Please try again to export it and check result. Also update to latest MRD MAC version and verify.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works. At Step 11, I clicked Home Sharing Import button doesn't work.

Help! I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works. I followed the steps in http://support.apple.com/kb/HT4527 to the letter. At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer. No matter what I try, the Import button doesn't work. There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import. The Settings button is clickable but the Import button isn't even live. In other words, I can see it but not click on it. I have double-checked my firewall and it is not the problem. How can I get the Import button to work?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now? in English

# Question
I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now?

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

RD Web access SSO - remote desktop doesn't work

Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
Pouyan

Thnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning.

"Do not import duplicates" doesn't work

Hi everyone,
I've been using Aperture 3.5.1 for a while and the import process always worked fine, until suddenly the "Do not import duplicates" feature stopped working. Now any time I plug my iphone or insert the SD card the photos I've already imported appear again on the import screen.
The funny thing is that if I open the library with iPhoto and import the images with it, the duplicate pictures do not show up, so it's definitely an Aperture issue. For the time being I'll keep importing stuff via iPhoto and then switch to Aperture for editing, but I'd like to get this thing fixed. I filed a bug report on Apple's bug reporter last week but got no reply.
Cheers

Well, it appears that if you
- import an image
- change your system time zone (going west, if that matters)
- plug the device again
then Aperure doesn't recognize you've already imported that image. I don't see how this could be considered a normal behaviour, I call it a bug (a bug iPhoto doesn't have btw).
You left something out: How did you set the Time Zone brick in Aperture's Import panel, when you made that test with a differnet Time Zone? Aperture uses the current system time zone to interpret the time stamps on the images as the default time zone, when you do not set the "camera time" and "actual time" correctly in the Import panel. This way you will import the images with a different time stamp, and then they will be different for Aperture. The date/time of the file are differnet, the file will be considerd to be different. But you can prevent that by setting the time zone correctly in Aperture's Import panel.

My desktop doesn't work

I wanted to change the folder icons, and I copied and pasted the desktop into a new folder. I deleted the old one, and now, it doesn't work. I can't add neither delete programs that were put in my desktop in the past. Does anybody know how to create a connection between my desktop and the new folder?
Thank you!!!!

I was going to respond but iyacyas beat me to it...
I decided however to delete my Desktop folder (in a test user) and reproduce your issue. Simply recreating a folder off the root level of the ~/ did not solve the issue. I was unable to add files to the newly created folder. Even upon verifying appropriate permissions. Ultimately what I had to do was run disk permissions from the install CD and then trash the finder plist in the user, on reboot I was able to properly access the Desktop folder.
Give iyacyas's recommendation a go first, report back and then verify permissions on the folder (Ctrl-Click on the folder, select Get Info). You want to make sure you have Read & Write access, Everyone (that's a group on the machine) should have No Access.
Folders outside of the default set created by OS X on the root level of ~/ can sometimes be tricky.

Import previews doesn't work

Hello, I'm using Lightroom v2.4 and Camera RAW v5.4. I have a Canon EOS 30D and Windows XP SP3, but Lightroom fails to display any import previews at all. The photos are just not displayed.Please see attached image
I can view and edit the photos in Lightroom, Bridge and Photoshop CS4. It is just the import preview in LR that doesn't work. I've been in contact with Adobe Customer Support, but so far they have failed in giving me any solution. Sad to say, but some of their attempts for a solution have been quite poor.
I've also installed LR on a different computer with the same result
Can anyone help? Regards, Sven David

I believe (don't use windows myself) on XP you need some sort of RAW extension from Microsoft installed to see the previews for RAW files from many cameras. Others probably know more about this.
A quick google shows this. That might be it but it appears old (as XP is of course)

Synchronisation between web and desktop doesn't work anymore (update)

Before today, I could synchronize my files between Web and my Desktop. It doesn't work anymore.
It tells me "Available soon"... It worked fine until today...
>>> That's ok, it's working again since a few minutes...

The problem is on the PC with Windows 7... where iTunes doesn't work anymore.

Extended desktop doesn't work with 2 monitors and Yosemite

The desktop doesn't extend across the two screens now that I've upgraded to Yosemite. How can this be fixed?

What version of OS X were you on prior to Yosemite? I was on Maverick and a window couldn't span over two monitors on Maverick either. I haven't had a need to span a window over multiple displays in a while so I wasn't missing it. But now that you mention it, it would be nice to have that ability back for the few times when it does come in very handy and I'd like to use it.

Remote Desktop doesn't work with local printer

I am having trouble using a locally networked printer when I use Remote Desktop to connect to a Vista machine. Under the local resources tab for RD, I have checked printers. The only thing I can figure is that my printer is networked locally, not connected directly to my machine. Every time I try to print during my remote desktop session, I can't access my locally networked printer.
I installed the printer drivers on the remote computer and when I try to locate the printer, I get the following error: "Windows cannot connect to the printer. Server print spooler service is not running..." but the spooler service IS runing.
I also found a post elsewhere that discussed setting 'share permissions' and 'network permissons' to resovle the spooler error. Still no go.
I tried to plug in my printer to a local USB port this morning. Still would not work. I keep getting the same spooling error. The drivers are not corrupt, as others have indicated may be the cause. They work fine on my system locally with 7.
Any advice would be greatly appreciated. I've spent a few hours on this one and am at a loss at this point.
Please help. I really need to print locally.

My problem was that the Vista remote system never saw local port that my printer was using for some reason and it never accepted the path noted above (\\servername\printer)...always came back with an error that it was an invalid path. This was with it both networked and plugged in via USB port.
I finally figued it out after four days and many hours on the phone with Microsoft. Microsoft support claimed that it was related to my router settings, but I didn't believe it since the remote computer saw my iPhone just fine when it was connected locally. After simply playing around, here's what I found...it was actually quite basic!
On the remote system, when you try to add a 'local' printer, there's a drop down menu with a list of local ports that your remote system sees. Some of those will be on the remote system, but others will be on your local system. Make a note of the ones that are seen on your local system. In my case, LPT1 was not visible, but COM3 was.
Next, on your local system, in the settings for your functioning printer (Printer Properties, Ports Tab), there's a tick box that says "Enable Printer Pooling." Once you check that box, you can select multiple ports on your local machine. Here, you need to tick the box that your remote system is seeing (in my case, it's COM3), but make sure that your exisitng port remains checked as well (in my case, an IP port for my wireless router). Basically what you're doing is on your local system, you are pooling your exising printer setup with a port that can be seen by your remote system.
Then, on the remote system, install the printer drivers but don't select a port. Then go into Printers and add a printer. Select 'local' setup for that and when asked for the port, use the port you checked in the previous step on your local system (in my case, I selected COM3 on my local system). Select your printer from the list. It will ask if you want to use the exisiting drivers...say yes. Then print a test page to be sure that it works. Worked fine for me.
I simply can't believe how obvsious that solution was! If the remote system can't see the port you currently use, pool your printer setup with a port that it can see!

Drag and drop to other desktops doesn't work in Mavericks

I'm currently experiencing an issue with dragging and dropping files within Mavericks. It seems to work only within one desktop: from one window to another. However, when I want to drag something to another screen/desktop the dragged items become stuck on the other screen. I can only move them again when I go back to the original window I dragged them from.
It is not practical to drag and drop anything on the same desktop on my (little) 13" MacBook Pro. By the way, this happened after updating to Mavericks.\
Can anyone help me?
If you're experiencing the same problem, please click the thumb.

the splice() method accepts two arguments. the first is the (start) index of the element(s) you want to remove and the 2nd argument is the number of elements you want to remove. in your situation, you should be using:
bubbles.splice(currentIndexArray,1);

"Show Desktop" doesn't work with function keys

I recently upgraded to snow leopard, while doing so I was messing with my expose settings, switching which shortcuts I want with what keys, and now I can't get "show desktop" to work with any of the function keys. I can set it to the shift key or something like that, but that's inconvenient. I've already gone to the keyboard section in system pref and set them to default, still nothing. Any ideas why this could happen?

Yes, I have the same issue on my MacBook pro. I used to have to press fn F11 to get the desktop to show in via Expose but now I am not able to access any of the F key functions since they are already predefined by volume, screen brightness etc.

Assign To "All Desktops" doesn't work after restart

Is anyone else having this problem?
I have several apps that I have assigned to show on "All Desktops"; however, after I do a restart, and these apps are magically restored, though they still claim to be assigned to "All Desktops" they only appear on the first desktop.
I have to then assign them to "This Desktop" and back again to "All Desktops" before they will actually display on all desktops.
Though I seldom restart, it is annoying to have to go through the apps and re-set their display settings each time.
I don't know if it is possibly part of the problem, but all the apps I have set to "All Desktops" I display on my second monitor (I do this so I can have things like Safari on my second monitor, and always available, no matter what I am working in on my main display).

This thread offers a solution, but it's vague and too broad: https://discussions.apple.com/message/16190593#16190593
I don't want to delete all my preferences and have to set them up again. So I did some research and I think I figured out a more targeted solution. The preferences file for Spaces in Lion is located here: ~/Library/Preferences/com.apple.spaces.plist
For some reason, ~/Library is hidden by default in Lion, so to get there you'll have to unhide it. Enter this command in Terminal: chflags nohidden ~/Library
Then, to open and edit that file, you'll need to download the XCode tools, here: http://itunes.apple.com/us/app/xcode/id448457090?mt=12
Finally, you'll want to open spaces.plist, find the line that refers to the application you're having trouble with, e.g.:
"com.apple.finder" = "3C65046B-FA18-4983-9219-8140A2B81A41";
Change that long string of letters to "AllSpaces". Save the file and restart and (I hope) that should do it. Will report back when I've tried this. Still waiting for the rather large XCode application to download from the App Store.

X11 Forwarding to my 10.4.3 Desktop Doesn't work

It seems to be that I can forward an X11 session to my 10.4.3 machine from a Linux or SGI machine using the -Y flag, but forwarding from 10.4.x Mac to 10.4.3 Mac, this does not work. Neither does -X or no flag at all. Forwarding to a 10.4.2 machine from a Mac DOES work (no flag, -X, AND -Y). ARGH!! X11 Forwarding used to be so simple!

hi Chris.
One thing I've noticed fairly recently is that in order for forwarding to work, the shell you are issuing the ssh -Y [email protected] from must first have the DISPLAY variable set to (say) .0. In other words, in a Terminal.app window, this works:
export DISPLAY='.0'
ssh -Y [email protected]
and this doesn't:
export DISPLAY=""
ssh -Y [email protected]
Of course, both machines have to be given permissions to allow x-forwarding in /etc/ssh_config and /etc/hostconfigure.
It works for me with every combination of SGI, Linux, Mac and Sun I can think of.
G5 2x2.5 GHZ and a few others Mac OS X (10.4.3)

Importing desktops doesn't work

Similar Messages

Maybe you are looking for