Importing does not show

I've used GB many times successfully before, but as I try to import a WAV or MP3 file, GB says that is importing, but when the import os finished, there is no file in the track (no colored audio track appears). Maybe I've changed a basic setting? Any help or suggestion would be appreciated.
Thanks.
Ed

fotoed wrote:
Maybe I've changed a basic setting?
no, there is no setting to change. try this:
http://www.bulletsandbones.com/GB/GBFAQ.html#mp3wontimport
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

ARQ: Role Import does not show roles in the preview

Dear All,
Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
I implemented SAP note#1897975 Role import does not show roles in the preview.
Still facing the same problem. Has any one faced this problem? Please suggest.
Regards,
Faisal

HI Faisal,
This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
Regards,
Neeraj Agarwal

I find no way to import my my.yahoo data into Thunderbird, the import does not show a source.

I downloaded and installed Thunderbird then used the import command to import my contact list. It did not import anything. I tried to import everything, again it imported nothing. I uninstalled TB and re-installed it. This time I tried to import everything first, and again it imported nothing. I have tried exporting the contact list from Yahoo email in both .csv and .ldif, but find no way to input or import them into TB. What can I do to import the address or contact file into TB. I have changed computers, but I am still using Windows 7 pro, and TB didn't have any trouble when I put it into the previous computer, which used Yahoo, last time. I'm at a loss as to how to do this other than manually typing in the listing, and I don't intend to do this even though I like TB much better than Yahoo for email.
Also, when TB copied my email from Yahoo, it failed to transfer most of my archived email, although it did get some of them. How can I move the rest of my archives, (3 email addresses) into TB? None of the canned messages address my problems.

'''re: Address book:'''
Export the contact list from Yahoo as a comma separated .csv and save this on your desktop.
In thunderbird.
* open 'Address Book'
* Tools > Import
* select 'Address books'
* click on Next
* select 'Text file (ldif, .tab,.csv,.txt)
* click on Next
* locate the.csv file on desktop and click on Open
* map fields to match Thunderbird fields
'''re: Mail'''
Do you have a Pop mail account?
If yes, then all pop mail accounts (no matter what the email client) can only see the server Inbox and download any previously not downloaded email.
To get other emails in other server folders onto Thunderbird, you need to:
* logon to webmail account using a browser
* move emails into inbox.
In Thunderbird
* click on GetMail to download those emails.
* Move emails into suitable folders.
* repeat as necessary to download emails.
Three email addresses - this would require a mail account for each email address.

Loaded CD for importing does not show in iTunes

I recently updated to Leopard 10.5.2 pretty much at the same time that my keyboard was replaced at the Apple Store, and since then, if I load a CD in order to Import music in iTunes, it will not recognize the CD until I Restart my 12" PowerBook 1.5 GHz.
I am thinking maybe I should dump some preference files, but not sure which ones.

I'm having somewhat similar problems- generally "commercial" cds are usuallly recognized- The Allman Brothers Band Live at the Filmore East, for example. But Joe Sample's "Old Places Old Faces" or Wes Montgomery's Full House are simply not understood by the system. The discs don't appear in the Finder window, iTunes, or anything else I've tried. I have rebooted without any consistant result. I have a Bela Fleck and the Flecktones CD set, "Live Art", which couldn't be read by a Sony PC I had ata worksite- I figured it was DRM gone mad, but I COULD load the Joe Smple CD onto that system.
IS anyone else seeing this as a specific CD issue?
Bill

IPhoto import does not show thumbnails

Since upgrading to iPhoto 9.2.1 on my wifes iMac the thumbnails do not come up for import when inserting a SD card. In order to import we have to go to Files>Import to Library and a list of images comes up, not the thumbnails. How can we get the thumbnails to come automaticaly when inserting a SD card?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

IOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange. Any solutions?

iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
Open the VCS file, this will create a Calendar entry in your Outlook,
Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
Delete original VCS-created appointment in your calendar to avoid multiple calendar.
Open the re-saved ICS file.
Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
Open the VCS file, this will create a Calendar entry in your Outlook,
Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
Delete original VCS-created appointment in your calendar to avoid multiple calendar.
Open the re-saved ICS file.
Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning. I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer. How or why it now works is a total mystery.

I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

When I attempt to import a CD the CD does not show up in itunes

I put a CD into my drive and the CD does not show up in itunes. As a matter of fact there are no import cd buttons in my itunes or in my file tabs. At first it was saying it was locating it but now nothing happens. I did get a new computer a month ago. I never had this problem before.

What format are the tracks?

A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip: So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email come

A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip: So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email comes through empty. Please help.

Copy that voice memo, create a new email and paste it and send it to yourself! You can save it to your computer now and send it to someone else

I am not able to import a audio CD the import window does not show up

I am trying to import a music CD but the import window does not show up and the cd does not copy into itunes.

Hello Kathryn,
Thank you for the details of the issue you are experiencing when trying to import songs from a CD. I recommend following the steps in the section titled "If you have trouble importing songs from an audio CD" in the article below:
iTunes 11 for Windows: Import songs from CDs
http://support.apple.com/kb/PH12486
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

Have you already confirmed that you trust the computer?
Launch iTunes, then connect your iPhone to the computer.
When prompted, confirm that you trust the computer.

IPhoto 9.4.2 does not show mp4 movies to import from SD Card

Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
What could be happening to my iPhoto?
Thanks in advance.

but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader? Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
OT

IPhoto does not show last import

iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
LN

Importing does not show

Similar Messages

Maybe you are looking for