Importing drivers takes long time

Hey all, i have a question about importing drivers. I'm importing drivers right now into one package from source that is about 1GB for one specific laptop. It already took 4 hours and its still importing. Why it is taking so much time??? Its not about
network issues- network works great. Anyone?

It's not about processor. The driver packs out there have a lot of info in them that just simply takes time to churn through. Additionally, all of the files needs to be copied to the package source location specified during the import wizard. Thus, it
simply can take a long time for this to happen based on many different variables.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1?

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1? I don’t have this problem with any other operating systems (Ex: Windows 7 or XP)

Can you perform a refresh ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Requisition Import is taking long time to complete

Hi,
I'm working with EBS 11.5.10 CU2, I have Requisition Import program scheduled, usually it's completing normal in around 5minutes; but sometimes it's taking around 30 minutes to complete. I compared the output files of program completing normal and taking long time, latter one has processed less requisitions than former one.
Could somebody help what could be possible reasons to check for program to take long time to complete.
Please help.
Thanks

945756 wrote:
Hi,
I'm working with EBS 11.5.10 CU2, I have Requisition Import program scheduled, usually it's completing normal in around 5minutes; but sometimes it's taking around 30 minutes to complete. I compared the output files of program completing normal and taking long time, latter one has processed less requisitions than former one.
Could somebody help what could be possible reasons to check for program to take long time to complete.
Please help.
ThanksDo you have the statistics collected up to date?
Please enable trace and generate the TKPROF file to find out why it takes that long -- https://forums.oracle.com/forums/search.jspa?threadID=&q=TKPROF+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Takes long time for shutdown after adding to domain

Hi,
Workstation OS - Window 7
Domain Controller OS - Window server 2008 R2 standard
Following thing i have measure with Stopwatch.
1) When the laptop is in workgroup, it takes just 17 second for shutdown.
2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
Why the shutdown time increased so much?
Do you have any idea?
Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
There is no logoff scripts / gpo's as well as we don't have roaming profiles.
Please advice.
Thanks & Regards,
Param
www.paramgupta.blogspot.com

Hi,
To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
To get the installer, you have to install the Windows 7 SDK.
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=3138
For shutdown tracing:
Run command:
xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
Collect logs and post them for further troubleshooting.
For more information please refer to following MS articles:
Long Shutdown Time on Windows 7 Ultimate x64
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
Long shutdown time on Windows 7 64 bit laptop
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
Lawrence
TechNet Community Support

Importing mpgs takes longer than it should

Importing mpgs takes longer than it should. I import 2 hr mpgs on a 6core 32gig ram machine & it takes too long. cs5.52

Wow. Sounds like a nice machine Steve. How long does a 2hr mpg take to import?
I just tested it out, and for me it takes about 5 min. ...which, in my opinion, is still too long, and should take no longer than it does to import something into PPro.
I understand your frustration there.
I think I mentioned before that Encore uses mp2 DVD files best. If you import things as mp2 or the DVD m2v file format, there is virtually no import time, and you do not have to transcode everything.
That said, unless there are things going on under the hood that I don't know/understand, I still agree that importing video files to timelines in Encore should take no longer than importing into Premiere. We don't need Encore to author or transcode until we're ready to export.

Restoration take long time

hi,
can any one help me for some issue..
in my UAT daily restration is happen for 5 schemas but while droping one of schema it take lot of time from last three days can any one suggest me what i have to do to resolved the same issue.
and also statustics gathering take long time
please suggest.
Thanks !!!
Vishal Hande.

>
in my UAT daily restration is happen for 5 schemas but while droping one of schema it take lot of time from last three days can any one suggest me what i have to do to resolved the same issue.
>
Do you mean you are doing the export and import? If so, check the session and see what it's waiting on (V$SESSION_WAIT). Or put a trace and see where it's hanging. It may be doing the statistics gathering or waiting on something
You need to give us all information. When you mean restore, we will think of database restore (RMAN or user-managed restore). So please supply all details in relation to what you are doing along with the database version and OS.

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

The Application Takes long time to Start

Hello All,
We ar eon Unix->64 Bit-> Essbase 11.1.1.3.
Problem Description : The application is taking long to start up. around 5 to 6 minutes. This is very first time it is happening.
There were no specific changes done to the application in the recent releases.
I have tried all options 1. Compacating outline, 2. Purging the application log etc. all other applications respond good on this host except this. Usually any application should not take more than 1 to 2 minutes to start up.
There are no specific errors or XCP files recorded in the logs and folders.
Appreciate your suggestions
MS

Thanks Jitendra and Prabhas,
I know i have posted this thread sometime back and later I had to jump on a New release, so did not get time to check your inputs.
Well I am back on this issue again. I have been working on various option to get this issues solved " start of App takes long time"
Here are some Details. We are on SunOs 64 Bit, has 12CU with dual core, with Essbase 11.1.1.3 running on it. This is an ASO application and has just 7 dimensions, Out of which the ORGANIZATION Dimension is pretty huge with Multiple Hierarchies enabled ( Both Stored and Dynamic ) and has more than 20,00,000 members including the alternate hierarchies ( Shared members)
I did a smoke test by building dimension by dimension the app was startiung up in just *40* seconds. and when i reached the ORG dimension and added more than 70,000 memebrs . there i fall sick. the app now gets back to its old issue ( Takes more than 10 mainutes to start).
CPU Usage ranges between 3.1 % to 4 %
PID USER NLWP PRI NI VSZ RSS S STIME ELAPSED %CPU COMMAND
4424 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep COMMAND
4428 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep ESS
4766 user1 88 55 20 6814168 5684200 O 17:37:48 35:45 3.1 /path/xyz/masked/ASO_APP hgfedc NOCREAT.
But My question here is, in the last moth cube i still similar number of members in the cube and nothing really had changed.
Essbase GURU's Please give me some Hint to think out of box now.
Thanks
MS

Report takes long time for few records

hi frends,
I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
Thanks
Mithun

hi sabhajit,
i have already checked the sql query it is taking less then seconds.
any other steps u want me to check then pls let me know?
thanks mithun

Photo both takes long time to open, what can i do?

photo both takes long time to open, what can i do?

SO do you think we can get a aunser? i just bout my imac u know!!

MVIEW refresh takes long time

Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
i executed SQL and it takes ust 1min ( total rows is 447 )
but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )
MVIEW configration :-
CREATE MATERIALIZED VIEW EVAL.EVALSEARCH_PRV_LWC
TABLESPACE EVAL_T_S_01
NOCACHE
NOLOGGING
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
Not sure why so much diffrence

infant_raj wrote:
Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
i executed SQL and it takes ust 1min ( total rows is 447 )
but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )A SELECT does a consistent read.
A MV refresh does that and also writes database data.
These are not the same thing and cannot be directly compared.
So instead of pointing at the SELECT execution time and asking why the MV refresh is not as fast, look instead WHAT the refresh is doing and HOW it is doing that.
Is the execution plan sane? What events are the top ones for the MV refresh? What are the wait states that contributes most to the processing time of the refresh?
You cannot use the SELECT statement's execution time as a direct comparison metric. The work done by the refresh is more than the work done by the SELECT. You need to determine exactly what work is done by the refresh and whether that work is done in a reasonable time, and how other sessions are impacting the refresh (it could very well be blocked by another session).

Takes Long time for Data Loading.

Hi All,
Good Morning.. I am new to SDN.
Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
Can you please suggest how to improve the performance of dataloading on this Case.
Thanks & Regards,
Siva.

Hi....
Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
Also check System log in SM21............and shortdumps in ST04........
Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
Regards,
Debjani......

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
For example : Delete index for 0SD_C03 takes around 55 minutes.
Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
Regards
Madhu P Menon

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Database Connectivity takes long time if one of the Node is down .. ??

Hello All,
Env: 10.2.0.4 on Solaris 10
I have 2 nodes.
When Node1 server is down, it takes long time to connec to the database.
tnsping would give "OK(2050ms)". Below is the tnsalias.
RAC_test =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.123)(PORT= 1521))
     (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.127)(PORT= 1521))
     (LOAD_BALANCE = yes)
          (CONNECT_DATA =
        (SERVICE_NAME = DK.com)
      (FAILOVER_MODE =
        (TYPE = SELECT)
        (METHOD = BASIC)
        (RETRIES = 180)
        (DELAY = 5)
)I put the trace on sqlnet.ora and found that first it pings to the "20.268.169.123",
since the Server is down there will not be any reply and this consumes the delay and
later it would ping "20.268.169.127" and connect to it.
If i keep "20.268.169.127" above "20.268.169.123" in tnsalias, and keep "LOAD_BALANCE=no",
it gets connected very fast, as its directly connecting to Node2. In tnsping i get Ok(40ms).
How do i reduce the connect timing if i use the first step. Why does it take long time for
Oracle Client to understand that the Node1 Server is down ?
TIA,
J J

I hope the IP's you are using in the TNS are Virtual IP's.
You must use Virtual IP's / hostnames for the failover to be quick. If Node 1 is not available then then it's (Node 1's) virtual IP would also get assigned to Node 2 hence all client connections are still able to get a response from the Node Virtual IP address without needing to wait for TCP/IP timeouts. This helps clients to get notified immediately that node 1 is unavailable and the connection tries the 2nd ip/host in the connect descriptor.
Hope this helps.
- Siba

Importing drivers takes long time

Similar Messages

Maybe you are looking for