Importing dvd's to edit in final cut (for uni project- a movie trailer)

Hi, I need to edit down an existing movie into a ten minute trailer for a project at uni. Obviously there will be a disclaimer stating this is copyrighted footage and I am not passing the content off as my original work, only the edit (otherwise this would be plagiarism). The problem is I was advised by the lecturer to use handbreak, which doesn't rip into a suitable format. I need the files as DV or .mov ideally. Any freeware that is up to the task? Visualhub is no longer available, even though i would've happily paid a tenner for that. Anyone any ideas? This is a one of project so I don't fancy paying a lot for it. Any tips will be greatly appreciated.

MPEG Streamclip: http://www.squared5.com

Similar Messages

  • Dvd ripper and edit in final cut?

    Is there any dvd riper that is free online that will let me rip a dvd and then put it into quicktoime format and edit in final cut?
    Thanks

    DVDxDV is not free but pretty cheap and works well

  • How to convert my personal DVDs to be edited in Final Cut Pro 7?

    Hi guys,
    I am working on a project that need to edit my personal DVDs in Final Cut Pro 7, but what i need to do first is rip the DVD to a Final Cut Pro 7 compatible format, to which format should i convert the DVD? I am using iSkysoft iMedia Converter for Mac, it has many output formats. It is a little difficult to decide the right one.
    Would you please help? If possible, please tell me the codec/ resolution/ bitrate . thanks in advance!
    Albert

    I understand what format DVDs are. My suggestion is - if you generated these DVDs, you must have the source footage. Why not use that?
    I'd suggest you open the manual and start with the getting started section and work through any tutorials that came with your version. This program is complex and you need a fundamental understanding of more stuff than we can cover in this forum.
    Ken Stone's website has a number of tutorials and is a good source of new user information as is Lyndia.com
    x

  • Importing Quicktime Files to Edit in Final Cut Express

    I just bought final cut express to edit quicktime files I receive from work. FCE will not let me import certain files and I get a message saying "Error: File Type Unknown", but what's weird is I CAN import some files that are the EXACT same file type!
    I have noticed that one difference in these files is that the icons in Finder are different. The file I CAN import is usually the default quicktime movie icon, while the ones I CANNOT import usually have a video thumbnail for the icon. Does this mean anything?
    The files are the same. Same codec, same frame rate, same dimensions, everything but the video length & icon view finder are the same.
    Please someone assist me with this or I will have to return FCE and start saving up for FCP I suppose.

    I couldn't do this action, I don't have Quicktime Pro. Should I invest in this? What does it mean if the Audio and Video aren't the same settings? Can I change them with Quicktime pro? Thanks!

  • How can I import a dvd and do edit in final cut pro ?

    any software to convert dvd movie into avi for edit ?

    Hi:
    If you own the material rights, you can use MPEG Streamclip to reencode to an editable format like DV.
    Hope that helps !
      Alberto

  • If i edit in final cut pro x, how can i create a dvd

    What is the best DVD creator to download to create DVDs  from movies edited in Final Cut Pro X?

    iDVD gets my top vote - it is no longer available from Apple, but still part of the retail iLife 09 or 11 versions available from online resellers. It offers customizable menus/themes which will give your creation a professional look. It encodes/authors and you can burn directly from it.
    Second is Roxio Toast (no customizable menus, but many other features and an excellent burn software).
    I've tried DVD creator and found it to be too simplistic. Then there is Burn (free) - it burns.
    I use iDVD to "create" and Toast to burn.

  • I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

    I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p?   How do I maintain the highest quality?

    No...ProRes is a high quality format. Finishing format.  Many TV networks take that as a final deliverable. 
    BUT...DVDs aren't high definition...they are SD.  You cannot make a 720p60 DVD with DVD Studio Pro.  Any DVD you make will be SD...720x480.  The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
    As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
    #42 - Quick and dirty way to author a DVD
    Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
    The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
    1. Export a QT movie, either a reference file or self contained using current settings.
    2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
    3. Select the left blue one and hit delete.
    4. Now, select the green one, right click on it and select the top option "first play".
    5. Now drag your QT from the browser and drop it on top of the green monitor.
    6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
    7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
    THATS ALL!!!
    NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing.  Then take THAT result into DVD SP and follow the rest of the steps.  Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

  • I have a mpeg file I want to edit in Final Cut Express. How do I best go about importing this file? I assume I must find a way of converting it....?

    I have a mpeg file I want to edit in Final Cut Express. How do I best go about importing this file? I assume I must find a way of converting it....?

    Use MPEG Streamclip to convert it. Depending on the type of file you might need to purchase the MPEG-2 playback component.

  • Using IDVD to create a DVD with HDV footage edit in Final Cut

    I tried to create a DVD with IDVD 5. It was a 5 minute hdv movie edited in Final Cut and the result was really bad.
    I have tried the best quality option but it's still a disaster. I taught about using compressor but It would take 110 hours to compress this movie in h:264
    What is my solution?

    I have tried the best quality option but it's still a disaster.
    Try best performance.

  • How import AVI files to my I Mac for editing in Final Cut?

    How import AVI files to my I Mac for editing in Final Cut?

    You first convert them to ProRes with Compressor or MPEG STREAMCLIP, then import the ProRes files into FCP.  FCP doesn't work with the AVI container...footage must be Quicktime, and must be in a codec FCP works with.

  • Help please importing mpeg files to be edited with Final Cut Studio

    Hey everyone, new to the video editing thing. I have a JVC GY-HM100U Pro HD camcorder and a MacBook Pro 5,1 with 2.53 GHz Intel Core 2 Duo Processor, 4 GB 1067 MHz DPR3, NVIDIA GeForce 9400M & NVIDIA GeForce 9600MGT running OSX 10.5.8. Have recorded footage in mpeg4 and want to now edit using Final Cut Pro 7. Have downloaded Quicktime Pro and am still getting a "the movie could not be opened when trying to import the mp4 file. The movie contains some invalid data" window when trying to open the mpeg4 file. I have also downloaded DivX, FF Player, & Handbrake if these help convert to another supported file format. Please help!

    That camera is promoted on the JVC website as being Final Cut Pro compatible.
    Have you tried to import the clips via Log & Transfer?
    You might also want to read up on the [workflow for that type of camera|http://documentation.apple.com/en/finalcutpro/professionalformatsandwork flows/#chapter=6%26section=0].
    Have downloaded Quicktime Pro....
    QuickTime Pro is installed automaticallly with Final Cut Studio. No need to buy it again.
    I have also downloaded DivX, FF Player, & Handbrake...
    That software is all pretty much useless for working with Final Cut Studio.
    MPEG Streamclip is free and much better.
    Tutorials and download links:
    http://discussions.apple.com/thread.jspa?threadID=2059475&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0

  • DVD to Qtime file to Final Cut

    Hi,
    I have a DVD of something I edited at work that I need to re-edit in Final Cut Pro. Its a copy of a film (has no Macrovision or anything else like that).
    How do I get a copy of it off of the DVD and into a format that Final Cut Pro can edit? Like a Quicktime File or DV File.
    I have a program callede MPG Streamclip but all the files on the DVD won't import. There are BUP,IFO,VOB files. I don't know what those are but...........
    I have Qtime Pro with the updated Qtime MPEG-2 playback.
    So how do I do this? Its been 5 hours now and its getting a bit sad.
    Tried Mac The Ripper but could only copy the DVD onto another DVD, which is no help.
    Is there a solution?
    Tracy

    Most high end video apps (and even iMovie) are DV (Digital Video) editing apps.
    This is why I suggested you export from MPEG Streamclip to the DV Stream (.dv) file format.
    If you export using any other setting your DV editor will need to "convert" your file into the DV format.
    This takes a long time. A faster computer handles the conversion quicker.
    I run my conversions while I sleep. No need to watch the water boil. It will, in time.

  • Can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!

    can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!. SHould i by a registration code for QT 7 Pro? I can't play mov files at all.. they were okay in my final cut time line. Now i can't see them!!! I can't import movies from my camera!!!
    Help from Brazil!!!
    Tks

    David,
    tks for your help !!!
    Hi people, first, tks for Birdman308 for his link
    https://www.hightail.com/dl?phi_action=app/orchestrateDownload&rurl=https%3A%2F% 2Fwww.hightail.com%2Ftransfer.php%3Faction%3Dbatch_download%26batch_id%3DOGhkZ28 xeWFiV3dYRHRVag
    and makbookpro as well for his link
    http://blog.lib.umn.edu/mcfa0086/discretecosine/164630.html
    Now i can back to work!!!

  • Import iMOVIE with sound? Export Final Cut Project to Pro Tools?

    I am considering the 30 day free trial for Final Cut Pro X. I have a new Macbook Lion laptop.
    I made a short film in iMOVIE 09 on my new laptop. I am getting it professionally scored next week. Can I seamlessly transfer iMOVIE project into Final Cut Pro X so that it keeps all my audio tracks? For example, I have natural background sound on many video clips. I have also added "monster" sound effects all over the place. I have voiceover here and there as well. So I am wondering if I import iMOVIE project to Final Cut Pro X are all the sounds merged (I don't want this) or does the project appear in Final Cut Pro X just like it does in my iMOVIE (video clip with a few audio clips under it)?
    Second question - The audio post company would need to export the project from Final Cut Pro X to a software program called Pro Tools. There are a whole bunch of "preferences" needed to be checked off to make sure they get project the way it should be. However, my question is does anyone know if Final Cut Pro X is compatible with Pro Tools Software?
    FYI - if I don't do the above I was told I need to make 8-9 copies of DVD of movie in iMOVIE. One would be video with natural sound when I filmed and all other sound turned off. Another DVD would be just voiceover sound and all other sound turned off etc... The audio post company needs each sound isolated so they can manipulate audio levels etc. This sounds like pain in butt which is why I am attempting to see if I can do the above.
    Thanks, Todd

    Thank you all for help. Spoke to engineer at audio post company. I told him it sounds like that I can export iMOVIE project to Final Cut Pro X and keep audio tracks. However, I cannot export Final Cut Pro X project to Pro Tools. Hence, no point in moving iMOVIE project to Final Cut Pro X.
    The engineer told me to make Quicktime files of the 4 minute movie with each different audio track. He said as long as the track does not overlap I can have multiple sounds... for example, if my voiceover occurs from 0 sec. to 30 sec and that is only sound then I can keep in a monster sound that occurs from 1 minute to 1 minute 30 sec. etc.
    I did forget to ask him one question. One filmmaker noticed that I had stereo monster sounds and mono monster sounds. I would think most people would not notice difference but the filmmaker did. Not sure if this company can fix something like that?
    Thanks again for all your help. The thing that is weird about all of this is if I buy the latest and greatest Final Cut Pro X and make my next project from scratch with it I still won;t be able to export using Pro Tools... Sounds like Pro Tools only works with Final Cut.

  • G5 Power PC vs Imac...which is better for editing with final cut studio 2?

    This is my present computer:
    iMac 3.06GHz Core 2 Duo (2008 model)
    4 gigs of 800 mhz ddr2 sdram (this is the max ram for this computer! )
    NVIDIA GeForce 8800 GS 512 MB
    Hard drive: 465 gig (I use mainly external drives for editing)
    I use this mainly for video editing with final cut studio 2.
    Rendering in compressor takes forever!!!
    A friend suggested I pick up a used G5 Power PC.
    I found this one, here are the specs:
    APPLE POWER MAC G5 PowerPC DUAL CORE (2 x 2 GHZ)
    System Mac OSX 10.5.8
    RAM 12 GB
    1 Hard drive of 160 Gb
    Superdrive 16x CD/DVD/DL DVD (32x)
    Video card NVIDIA GeForce 6600 (VRAM 256 Mb)
    3 open PCI-Express expansion slots.
    1x FireWire 800
    3x FireWire 400
    4x USB 1 and 2
    2x Ethernet Port
    2x Displays ports
    Is this insanity or a smart move to move over to the older G5.
    According to my friend, the older G5s are much better at processing video.
    Is a dual 2 GHZ processor enough or would I need a 2.3 or 2.5?
    OR is there another option that someone might be able to suggest?
    I would be so appreciative of any opinions regarding this issue.
    Thanks in advance.
    Bill

    Save your pennies and look for a refurbished or used MacPro. Early 2008 or newer 8 core machines w/8GB of RAM running 4 instances in QMaster will chew through material.
    Beyond running compressor, it is just a better all round machine for editing video.
    • it has multiple internal drive bays which run via SATA connections - much faster than the FW800 limits of the iMac for external drives
    • it has 3 slots which give you the option of an i/o card from AJA, Blackmagic or Matrox so that you can actually monitor your video properly as well as ingest high end formats
    • the slots give you the ability to connect esata raids for even higher data speeds
    • you have much greater flexibility with computer monitors
    • you have much greater RAM capacity
    and so on ...
    x

Maybe you are looking for