Importing entire project into DTR

Hello All,
I need to put my project into DTR.
Can i import my entire project into DTR inspite of doing it file by file.
Thanks & Regards
Abhivyakti

Since my colorsit doesn't have CS4, I nested sequences in another timeline so that when I imported project in AE my colorist could see the one clip nest and click it to see other timeline to see all clips detail.
Thank you.

Similar Messages

How to import an existing project into DTR

I have one question for NWDI:
There are two senarios:
A. I created a web dynpro project without NWDI. Now I want to import it into DTR. Is there any workaround?
B. My NWDI crashed and can not be recovered. Then I install a new empty NWDI. Since I checked out all the DCs to my client side. Is there any workaround to re-import the project into the empty NWDI?

Hi,
You can transfer local DC project into NWDI. I have a doc which tells the procedure to Convert local CAF DC project into NWDI. For Web Dynpro project the procedure will be same. So you can go through the doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3e479a6a-0b01-0010-62bd-dcfe09c67c41
Without NWDI you can also do your development by usind DCs in your local plugin folder. Here is one doc also.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f7be53bb-0b01-0010-1c96-be3cb6799c1b
I think it will help you to solve your problem.
Thanks
Chandan

Importing entire Projects?

Is there a way of importing an entire project into JDeveloper? I already have the .jpr file and all the files associated with that project and I just want to add it to an existing workspace.
Is there a way of moving an entire project from one computer to another? Or if I want to move a project from one workspace to another?
This will also help in how add a project after I do a cvs checkout module if that module was created with a .jpr file from another computer running JDeveloper.
Thanks!
Sincerely,
Andrew

Hello Andrew,
Just save the jpr file and copy all its contents to a different machine. By all contents, I mean, all the files present in the jpr file. Please keep the structure consistent. Now, just open this jpr in the other workspace. This should do the job.
Thanks.

Importing web project into Workshop 9.2

Hi,
I'm trying to import an existing web project into Workshop 9.2.1 from my Subversion source. Unfortunately Workshop doesn't recognize this project as a valid web project.
I imported the code project using 'File>Import>Existing Projects' into Workspace.
Unfortunately, I get the following errors:
- "The library module reference : beehive-netui-1.0 is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
- "The library module reference : jstl is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
How do I tell Workshop that this project is indeed a web project?
Does anyone have any suggestions?
Thanks,
Derrek

Wow.... I figured out a workaround (aka Ugly Hack). It seems that Workshop doesn't properly import Portlet projects. Here's how I got around it:
1. Checkout the code from Subversion
d:\MyProjects\Project\trunk\MyComponent\
2. Move MyComponent to a temp directory
d:\MyProjects\Project\trunk\MyComponent\ --> d:\tmp\MyComponent
3. Open Workshop and create a new Portal project and PortalEAR project of the same name as the MyComponent projects
File>New myComponentPortal
4. Copy over the src and WebContent directories in the SVN directory with the files from tmp.
d:\tmp\MyComponent\src -> d:\MyProjects\Project\trunk\MyComponent\src
d:\tmp\MyComponent\src\WebContent -> d:\MyProjects\Project\trunk\MyComponent\WebContent
5. Refresh Workshop and let the spooky voodoo happen. Viola! Now I've got a running portal project with a SVN connection.

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

How to import existing projects into JDeveloper 11g

I am trying to work with JDeveloper for my application and want to know whether it is possible to import existing projects into the work space in JDeveloper. I am currently working with eclipse IDE and this feature is available in it. How can I connect to clear case from JDeveloper? In eclipse it is very easy to connect to clear case with a plugin installed and check out, check in files from the source control. Any help is greatly appreciated.

The basic way to import code is to use the "New->Projects->Project from existing code" or "project from WAR" dialogs to create your project.
You then need to do some tweaking in the project properties->Content (and sub nodes such as resources and Web content).
And also set the correct JARs/Libraries in the project properties.
You can use the help->check for update to download the extension to JDeveloper that will let you integrate with Clearcase to do version management.
This how-to might help you with your migration:
http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html

Problem with importing premiere project into after effects

Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
what can I do?

Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
Mylenium

How to import maven projects into jdev

Hi.
i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
please help appriciate your help

Though it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
CM.

Can i import Jdeveloper project into Eclipse 4.7 juno????please help me.

can i import Jdeveloper project into Eclipse 4.7 juno????please help me.
when i tried this it is giving some errors in project ie mismatching in configurations....!so i want soln please .

Hi,
first recommendation is to not use Eclipse natively but use OEPE that ships with Eclispse Juno. This way you have the IDE prepared for ADF projects. However, still the JDeveloper workspace structure does not fit the Eclipse structure.
Frank

HT4007 I have multiple libraries. I would like to import one project into another library. How?

I have multiple libraries. I would like to import one project into another library. How?

Select the project in the Library Inspector and export the project as library. Then import this library into your other Aperture library.
File > Export > Project as New Library
File > Import > Library
Regards
Léonie

Share a flex project into DTR

Hi experts,
has somebody experience to share an flex project into DTR? As I know sharing is only possible for DC types supported by SAP.
Though in NWDS there is a mechanism ('Convert project to Development Component or 'Migrate into Software Component'') possibly to fit this task but it fails always because of, i think, not supported DC type (there are no Dc type for Flex development).
But how can I get my flex source code into DTR in order to maintain, version and sharing with other developers?
Best Regards.
Cemal

Hi Cemal,
if managing versions and sharing code is the only thing you want to do with your Flex resources you can use the [DTR Command line tool|http://help.sap.com/saphelp_nw70/helpdata/en/8f/88d93f130f9115e10000000a155106/frameset.htm] to do this.
Your are then independent of NWDS (allthough the tool is delivered with NWDS). You'll have to build and deploy your applications yourself and also keep track of the deployed versions.
If you are using NWDS for your development, use the DTR Perspective to create new DTR clients. Add your (Flex) Project folders under the local DTR client and upload the resources. Your colleges should be able to synchronize these sources, when using the same DTR Client name on their machnie. See [Configuring DTR Clients|http://help.sap.com/saphelp_nw04/helpdata/en/17/73a43f4aa1330ee10000000a114084/frameset.htm] and [Working with the DTR|http://help.sap.com/saphelp_nw04/helpdata/en/83/74c4ce0ed93b4abc6144aafaa1130f/frameset.htm].
Hope this helps a little.
Regards,
Alain

Trouble Importing Motion Projects into DVD Studio

I’m in the process of creating a Demo DVD and I was looking to use Motion to create menus and transitions in DVD Studio Pro. Every time I try to import a project I get an “Incompatible Format” error. My roommate’s iMac G5 imports Motion projects with no problems. I called Applecare to get help and was told Motion was bad and to reinstall it. I did and it didn’t work. (It was also suggested that my video card might not be good enough. Doesn’t make sense though because my roommate’s iMac does the trick.) I called back like I was told and was informed by another guy that I don’t have support available to me because the complimentary phone support expired last year. What is the world is wrong? Does anyone have any suggestions? I’m game for a complete hard drive wipe if it’ll fix the problem? My specs are below. Here are the specs of my roommate's computer:
Processor: 2.1 GHz PowerPC G5
RAM: 1.5 GB DDR2 SDRAM
Video Card: ATI Radeon X600 XT, 128 VRAM
Software: Final Cut Studio Academic
Please help me!!
~Thanks

One more thing, I tried opening up my project no DVDSP on my roommate's computer and it worked. His own project worked too. I brought the same files over to my computer (I opened the files both time off my thumbdrive, so they're the same files, not copies) and I got the same "Incompatable Format" error.
I also cannot import Motion projects into FCP either, but both my roommates can.
~Jeff

Importing liveType project into Final Cut Express HD

Hi
When i try to import my Livetype project into FCE an file error pops up with the message "File error: 0 files, 0 acces denied, 1 unknown" In this directory there is only one file with the projectname en de extension ipr.
Those anyone know what the problem is ?
Thanks in advance
Tonnie

I encountered the same problem. When I first installed this program I did not install all of it. I went back and installed live type and soundtrack after he fact. Then I started receiving the same error message.
I reinstalled the entire program at one time and now I do not receive that error message. I hope that helps.

Importing a Project into Eclipse

Hi Folks,
My collegue just zipped up a flex project and emailed it to
me. I'm trying to get it set up in my own Eclipse/FlexBuilder, and
could sure use a little guidance, since I'm new to all this.
First, shall I create a new Eclipse workspace for this
project?
Then what? The File | Import function demands that I create a
"New Project". But if I create a flex project, it creates a whole
bunch of files that will just be over-written when I unzip the
*real* project. Which will probably corrupt somebody's view of the
project.
If, instead, I create a new project, and Import into that,
well, what sort of project should I create?
And where do I point my workspace directory? Anywhere seems
to do, but should it point to the place where I unzip the real
project files?
And finally, is there some documentation that covers these
basic mechanics? This just seems far far far more complicated than
it needs to be, and a simple explanation of how to set up new and
exlisting Eclipse/Flex projects would be a great help.
Thanks,
ws
p.s. If anyone has a Team Server plugin for Eclipse, please
let me know. That too would be a great help!

Question 1) does your ziped project have .project file inside
of it?
1) if (Yes)
you dont need to create new project
open Eclipse click file -> Import ...
in a dialog open Plus sign next to general and select
"Existing projects into workspace". click next
next window you need to browse to directory where you have
unzipped your project (make sure you select directory that has
.project file inside ) after clicking ok in browser dialog eclipse
should recognize it as project and lastly you will see eclipse
displays that as a project you can select , so select it and click
finish , thats it all should be done.
2) if your zipped project does not have .project file :
before doing anything you need to analyze the directory
structure, does it have WEB-INF in it does it have src etc , if you
can at least shortly outline that directory structure it would be
lot easier to tell you how to get it working.
it look slike that you are trying to create non basic flex
project?
}

Importing entire project into DTR

Similar Messages

Maybe you are looking for